Windows 7, Time is continuously being reset, and network getting disconnected.
Hello,
I have Windows 7 64-bit Pro.
I have noticed over the last few days, the clock has been switching to a wrong time constantly. All attempts to resolve have failed (such as w32tm /register.. etc).
Here is a log after a finally enabled the log to w32time
151035 22:17:38.3512691s - W32TmServiceMain: RequestNetTopoChangeNotification Succeed
151035 22:17:38.3862712s - W32TmServiceMain: Network Topology Change
151035 22:17:38.3862712s - TimeProvCommand([NtpClient], TPC_NetTopoChange) called.
151035 22:17:38.3862712s - NtpProvider: Network Topology Change
151035 22:17:38.3862712s - Peer (special) now pending: <Name: poll:604800 diff:1683 last:130495025752271012 resync?:FALSE>
151035 22:17:38.3862712s - Peers reset: p-p:1 a-p:1 a-x:0
151035 22:17:38.3862712s - NtpProvider: Created 2 sockets (0 listen-only): [::]:123<0x0>, 0.0.0.0:123<0x0>
151035 22:17:38.3862712s - StartListeningThread completed!
151035 22:17:38.3862712s - PeerPollingThread: waiting 596117.543s
151035 22:17:38.3862712s - StartPeerPollingThread completed!
151035 22:17:38.3862712s - PeerPollingThread: PeerListUpdated
151035 22:17:38.3862712s - PeerPollingThread: waiting 596117.543s
151035 22:17:38.3862712s - W32TmServiceMain: waiting 380.853s
151035 22:17:38.3862712s - W32TmServiceMain: RequestNetTopoChangeNotification Succeed
151035 22:17:38.5022778s - W32TmServiceMain: Network Topology Change
151035 22:17:38.5022778s - TimeProvCommand([NtpClient], TPC_NetTopoChange) called.
151035 22:17:38.5022778s - NtpProvider: Network Topology Change
151035 22:17:38.5022778s - Peer (special) now pending: <Name: poll:604800 diff:1683 last:130495025752271012 resync?:FALSE>
151035 22:17:38.5022778s - Peers reset: p-p:1 a-p:1 a-x:0
151035 22:17:38.5032778s - NtpProvider: Created 2 sockets (0 listen-only): [::]:123<0x0>, 0.0.0.0:123<0x0>
151035 22:17:38.5032778s - StartListeningThread completed!
151035 22:17:38.5032778s - PeerPollingThread: waiting 596117.426s
151035 22:17:38.5032778s - StartPeerPollingThread completed!
151035 22:17:38.5032778s - W32TmServiceMain: waiting 380.737s
151035 22:17:38.5032778s - W32TmServiceMain: RequestNetTopoChangeNotification Succeed
151035 22:17:38.5032778s - PeerPollingThread: PeerListUpdated
151035 22:17:38.5032778s - PeerPollingThread: waiting 596117.426s
151035 21:55:42.1499712s - W32TmServiceMain: timeout
151035 21:55:42.1499712s - W32TmServiceMain: waiting 1024.000s
151035 22:01:43.1056167s - RPC Caller is Rami-PC\Rami (S-1-5-21-1009280683-652599584-2417717035-1000)
151035 22:01:43.1056167s - RPC Call Attribute is local=1, kernel=0, session=0, authentication=6, protocol=3, OpNum=2
151035 22:01:43.1056167s - RPC Call - Query provider status
151035 22:01:43.1056167s - TimeProvCommand([NtpClient], TPC_Query) called.
151035 22:01:43.1076168s - RPC Caller is Rami-PC\Rami (S-1-5-21-1009280683-652599584-2417717035-1000)
151035 22:01:43.1076168s - RPC Call Attribute is local=1, kernel=0, session=0, authentication=6, protocol=2, OpNum=6
151035 22:01:43.1076168s - RPC Call - Query Status
151035 22:01:44.2036795s - RPC Call - Query provider status
151035 22:01:44.2036795s - TimeProvCommand([NtpClient], TPC_Query) called.
151035 22:01:44.2036795s - RPC Call - Query Status
151035 22:01:46.0127830s - RPC Caller is Rami-PC\Rami (S-1-5-21-1009280683-652599584-2417717035-1000)
151035 22:01:46.0127830s - RPC Call Attribute is local=1, kernel=0, session=0, authentication=6, protocol=2, OpNum=0
151035 22:01:46.0127830s - RPC Call - ForceResync
151035 22:01:46.0127830s - W32TmServiceMain: ********** Time Slip Notification **********
151035 22:01:46.0127830s - ClockDispln TimeSlip:TimeSlip LastUTC:739220 SetUnsync: LI:3 S:0 RDl:2392618 RDs:78768140 TSF:0x0
151035 22:01:46.0127830s - TimeProvCommand([NtpClient], TPC_TimeJumped) called.
151035 22:01:46.0127830s - W32TmServiceMain: waiting i16.000s (1024.000s)
151035 22:01:46.0127830s - PeerPollingThread: PeerListUpdated
151035 22:01:46.0127830s - Resolving manual peer: time.windows.com,0x9
151035 22:01:46.0357843s - Create new peer associations: #1
151035 22:01:46.0357843s - Association: (Local) 0.0.0.0:123 => 64.4.10.33:123 (Remote)
151035 22:01:46.0357843s - Created reachability group: (
151035 22:01:46.0357843s - 64.4.10.33:123,
151035 22:01:46.0357843s - )
151035 22:01:46.0357843s - PollIntervalChange(): clear: host 0 = max 17
151035 22:01:46.0357843s - PeerPollingThread: waiting 0.000s
151035 22:01:46.0357843s - PeerPollingThread: PeerListUpdated
151035 22:01:46.0357843s - Reachability: Attempting to contact peer time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123->64.4.10.33:123).
151035 22:01:46.0357843s - Polling peer time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123->64.4.10.33:123)
151035 22:01:46.0357843s - Sending packet to time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123->64.4.10.33:123) in Win2K detect mode, stage 1.
151035 22:01:46.0357843s - PeerPollingThread: WaitTimeout
151035 22:01:46.0357843s - PeerPollingThread: waiting forever
151035 22:01:46.0357843s - PollIntervalChange(time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123->64.4.10.33:123)): reclamp: 17 -> 10 (min=4, max=17, sys=10)
151035 22:01:46.0357843s - Peer poll: Max:604800.0000000s (special) Cur:00.0000000s
151035 22:01:46.0357843s - PeerPollingThread: waiting 604800.000s
151035 22:02:02.0136982s - W32TmServiceMain: timeout
151035 22:02:02.0136982s - Sample Prepared at 130495033220136982 for peer time.windows.com,0x9 (ntp.m|0x9|0.0.0.0:123->64.4.10.33:123)
151035 22:02:02.0136982s - W32TmServiceMain: waiting 1024.000s
151035 22:02:02.0146982s - RPC Caller is Rami-PC\Rami (S-1-5-21-1009280683-652599584-2417717035-1000)
151035 22:02:02.0146982s - RPC Call Attribute is local=1, kernel=0, session=0, authentication=6, protocol=3, OpNum=2
151035 22:02:02.0146982s - RPC Call - Query provider status
151035 22:02:02.0146982s - TimeProvCommand([NtpClient], TPC_Query) called.
151035 22:02:02.0146982s - RPC Caller is Rami-PC\Rami (S-1-5-21-1009280683-652599584-2417717035-1000)
151035 22:02:02.0156983s - RPC Call Attribute is local=1, kernel=0,
Please help me!
Hi,
Generally speaking, system time problem is probably relate with hardware problem, Such as CMOS battary on motherboard problem.
Please try to upgrade motherboard driver for test to fix this problem.
In addition, please also check if your computer had BIOS updates, if so, you can also try to update BIOS edition for test.
Be warned: Flashing BIOS is a risky process. If power is interrupted during the update your machine will be rendered unusable.
Roger Lu
TechNet Community Support
Similar Messages
-
Itunes continues to crash and I get a Data Execution Prevention error.
Vista 64 bit
Many thanks. If you're still not launching after your complete uninstall/reinstall, we'll go searching for old QuickTime componentry stashed in non-standard locations on the PC.
First we'll need to change some view settings.
In your Start menu, open Computer.
In your Organise menu, select Folder Options.
In the View tab, make sure that "Show hidden files and folders" is selected, and Hide extensions for known file types is unchecked.
Click OK.
Now in Computer, open your C:\ drive (or whichever drive you have your operating system installed on).
Open the "Windows" folder.
Open the "SysWOW64" folder.
What files and folders can you see in there with QuickTime in the title? (In a standard installation of Quicktime you should be seeing precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
please help.
MY IPHONE 4S, AFTER UPDATE TO IOS 7.0.6, BEING RESET AND LOCK BY ICLOUD. AND FORGOT THE PASSWORD. COULD I do ANY THING ?The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818 -
Restored in disk mode, reset and only get apple logo
Older 15gb IPOD(Docking Connector) frozen at the Apple Logo on start-up. I reset and went to disk mode. Ran updater and used system restore. Updater runs and I get a screen saying its complete and the IPOD is restarting....wait. IPOD screen changes to "OK to Disconnect" and stops. Waited 10 mins or so and then reset. IPOD screen resets and I get the scroll bar across the bottom. When it fills the screen blinks and it freezes at the apple logo. Reset with same results. I can still get to disk mode but that's it. Latest updater installed.......any ideas?
iPod Displays a Red "X" Icon
If you are unable to get the device into Disk Mode, it's likely that the iPod needs servicing. The Hard Drive is probably shot.
B-rock -
After updating to windows 8.1 my wire less internet connection is getting disconnected intermittently .I am unable to predict the frequency or time
period this is occurring.But now i am really struggling to use the internet.I have tried my laptop vendor support and Microsoft support both failed to provide a solution.Please help me to resolve.I have installed the Wifi driver from real tek site many times
,but that is not helping.kindly provide me the guidance.
when i searched in internet i am able to see many people are struggling with this same issue .Hi,
You can refer to this blog, and try to roll back to the older version of network adapter driver to check the results. Other suggestions can also be used to troubleshoot your issue.
Windows 8.1 Wifi showing "limited" or "No Internet Access"
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
Meanwhile, please check with the manufacturer of your router to update the firmware.
If the issue persists, please help to collect following information for further research:
1) Enable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * enabled
2) On the client enable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
3) Now, turn off Wireless adapter on the client and Turn it back ON for making it to authenticate. Once it fails to connect to the Wireless network, proceed to the next step.
4) Disable RAS Tracing on the client.
- Over an Administrative command prompt.
- C:\> netsh ras set tracing * disabled
5) On the client disable the following log as well:
- Over an Administrative command prompt.
- C:\> netsh trace stop
6) Please provide the following files:
From the Client:
a) ZIP folder of C:\Windows\Tracing
b) C:\Net.etl and C:\Net.cab
Upload these files in SkyDrive and post back the shared link.
Keep post.
Kate Li
TechNet Community Support -
How do I get my money refunded? I am not getting what I want from this, cannot email anyone for help, cannot get someone on the phone I can understand, and keep getting disconnected. I just want my money back.
"this" being what? You posted in the Workspaces.acrobat.com forum, which is a free service.
If you subscribed to any of the paid services see Cancel your membership or subscription | Acrobat.com online services -
We have our company internal application which is protected by SiteMinder. When we type https://appname.domain.com in IE i get popup window asking me to enter uid/pwd and works fine. However same URL when i login in FireFox, i get pop up window two times. So i wonder why FF is asking two times instead of just only once.
Thanks for your help.Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes] -
Time capsule not being recognized by network, Airport working fine.
Time capsule is not being recognized by network. Tried unplugging and restarting, but no go. Airport is working fine and network is up and running.
Try just doing a reset to the TC..
An upgrade to lion might just put you into the fire.. even the frying pan is better.
I would suggest you downgrade the firmware on the TC to 7.5.2 as later firmware is more buggy and adds nothing for OS earlier than Lion.. on the contrary it causes more issues.
This will not harm your existing backups.
Are the two computers both connected by ethernet?? Is the connection issue over wireless?
Give a bit more info on the network layout. Mode of the TC.. are any computers using ethernet? -
My daughter's iPod touch 5 first crashed when listening to iTunes Radio, then it started losing my wifi connection, especially if We went to safari to search. The screen continues to crash, by turning dim then black very suddenly, or green with lines then black. I've rebooted. I've reset. I've tried backing up onto iTunes for a restoration, but have lost many pictures and some apps. One other strange occurrence is that the time has changed on its own. It's like it's possessed. Please help.
It states the iOS 7.0.2 is up to date. Also continues to lose wifi while trying to check this.
The crashing is what is slowing time down, I think. It's a half hour off already -
I have a long established AOL account which I wish to close. My current web address is: [email protected] With dropping AOL as my web provider, will I need to create a new email address; does continuing to use my current email address obligate me to continue paying AOL?
Probably your Mac cannot understand the Windows html format, please try the following to see if it helps:
In your PC, export the bookmarks in html as you did in your post. After you have saved it, change the name of the file to “bookmarks.html” and save it again.
In your Mac, import the saved file as you posted. -
Export via Quick Time ends up being pixelated and poor quality
I shoot my student film on an Arri S camera with 16mm color stock. I got my film back to me from the school on a DV tape and imported it into FCP HD on my camcorder. When I went to export it onto a DVD for my actors, the film looks horrible! The blacks are really pixelated and the colors aren't as crisp as they were on film. I was told that it should look the same because we made the movie on better equipment and FCP won't lessen that, but at the same time FCP can't make poor quality work any better. Can someone tell me how to export my film without losing the 16mm quality. I don't want it to look digital, I spent a lot to get the real film stock. Thanks!
1- The film is 6 minutes long
2- I don't know where to find out about the bit rates
3- The audio is simple, just 48 khz stereo.
When using DV format, what's the difference in DV, DVPRO, etc.?
The movie was filmed 24 fps, but then put onto a dv tape for me, so I assume they transferred it at 29.97 fps. Should I now use NTSC or stick to PAL? Basically, anymore compression makes the film look really bad and unusable for festivals, which ultimately was the whole purpose of my blood, sweat, and tears behind this film.
Thanks for all your help and any more questions you need answered to solve this problem I'd be more than happy to answer. -
It would be nice so that my bigger print with Firefox and to see all by bookmarks without changing the print from small to bigger or just print so I can see all th pages all the time?
To print larger fonts of a page, select print preview. Then change the 'scale' to an appropriate size.
-
As above. Additional point my previous trial was still active on my defunct computer. Would this prevent it opening on my new computer.
no.
uninstall, clean and reinstall per Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
Iphoto starts to open but the time lapse wheel just spins and never gets to photos
I have iPhoto 11 version 9.2.3. Running on Mac OS X Version 10.6.8.
Iphoto worked up to about a few weeks ago. Now it opens to the iphoto screen but just stays there with the time lapse wheel spinning for hours and never opening to the photos. Not sure what to do to fix it.Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If you get the same SWOD (spinning wheel of death) then try this: make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
If the test library opens and runs OK the problem lies with your current library. In that case make a temporary, backup copy (select the library and type Command+D) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I have had Windows 7 64 bit for the past year and have run Firefox with no problem. It was the most problem free of the three browsers including IE and Chrome.
I have a Vista side where I run my online backup and did so yesterday. Went on Firefox. No Problem.
Today I booted into the Windows 7 side. Seemed to boot up okay. Until I opened Firefox. Suddenly, my whole computer crashed, windows shut down and that bluescreen popped up. I restarted normally. Same thing. I restarted in safe-mode. Couldn't find any problems. Went back to regular mode. Started FF. Boom crash.
Back to safe mode. Did a system restore. Back to regular startup. Didn't help. Attempting to open FF crahed windows.
So back to safe mode. Started Firefox. Crashed the whole computer and same blues screen.
So I uninstalled FF. Reinstalled FF. It still makes Windows crash.
So now I am on IE :PSee below -- the way I asked the question the first time may not be clear. This post was a goof but I can't figure out how to delete it
Maybe you are looking for
-
This is actually not a JSP question but an HTML question. I could'nt find any good html forum sites out there, and since I received excellent replies in my previous post, I am hoping that those of you who know JSP also know html. Heres my question, i
-
FTP command using File adapter
Hi, When i use the file adapter in FTP mode i need to add an xtra command before sending the file. I.ex: SITE LRECL=84 RECFM=VB WRAPRECORD Using manual connect i do this ftp 111.111.111.111. User/pass SITE LRECL=84 RECFM=VB WRAPRECORD put c: est.
-
Include BLANK OPTION for an attribute dropdownlist in tx: COMM_ATTRSET
Hello experts, I would like to add a BLANK OPTION for an attribute dropdownlist, I have tried to add a space character in "Value Range" but the systems give me an error " Enter a fixed value". How I can include a blank option for an attribute dropdo
-
Is using the MBOX as an audio interface for garage band possible?
I have an MBOX that I used with protools on my PC and it may be awhile before I finally get protools on my mac. Is it possible to use the MBOX with garageband?? and if so...are there any specs I should know about before using it? Message was edited b
-
Can't be launched: "must launch at least one other suite component"
I had to de-activate Photoshop CS3, I continue to run CS4. Ever since I'm getting this pop-up when I open windows etc and can't open Acrobat Pro 8. I've re-installed Acrobat, launched Bridge, Photoshop etc., but the problem remains. Any clues?