Windows 7 toolbox on system with only 2 partitions

I installed Win 7 with a clean install and new hardrive on my T500. So I have only 2 partitions, C and D (system and data). Anyone know if toolbox will install without wanting the hidden lenovo partitions?
I don't want to install it if it does as I like the current setup and have no need for lenovo recovery options. I would like the other tools however.
thanks

Did your machine come with windows 7 pre-installed and does it have the recovery partition intact? If so, you can burn off the media and it should be for whatever OS is currently installed on it (win 7). If you have a win 8 machine with a win 7 downgrade license and lenovo sent you just the win 8 recovery media and you cannot make the recovery media from the OS, then you can request it from tech support.

Similar Messages

Can flash player app be run and controlled in a system with only command line?

I want to test my. flash app in a remote linux pc. I am not permitted to install desktop environment in that remote pc.
So I am wondering if I can use flashplayer_10_sa_debug to run my app in a system with only command line access.
And further, can I use some command option to interact with my app for doing something?
If not , how can I reach my goal? Can you give me some advices?

Hi,
Can we get a status update for this? This seems to have broken Mac Projector files when published from a PC. Our old CD-ROM presentations no longer work. They throw the same error.
Is there a bug ticket that we can follow? Any sort of timeline? I need to give an answer to my client on when this will be fixed. Telling them to disable Gatekeeper isn't really a great solution.

Rescue and Recovery with only one partition, what will happen? Thanks!

Hello, everyone! This is my question: If I do a clean installing of Windows 7 with only one partition(the C and I install the Rescue and Recovery tool, when I make a backup of the system by using the Rescue and Recovery then the backup file will be stored in the partition C:. So when I restore the system with the backup file later, if I can succeed and what will happen? Thanks.
Solved!
Go to Solution.

Backups and restores will still work. The risk is if something happens to your hard drive, then you would lose the backups as well. For this reason it's a much better idea to store your backups somewhere else, such as USB hard drive or network.

Why is my 8 gigs of ram not fully usable on a Windows 7 64-bit system with an HP G42?

The title contains most of the details, but to re-explain briefly, I recently installed two 4 gig sticks of ram in my HP G42-415DX. The full 8 gigs shows as installed, but only 3.74 gigs is showing as usable. I have verified that I have a Windows 7 64-bit system (Home Premium to be exact), and I have recently updated drivers (at least I'm sure I've updated all the drivers, but it is possible for one or two utility type drivers not being installed) to try to solve the problem, to no avail.
If there's anything more I can provide, let me know.
EDIT: And while I'm thinking of it, they are 8500's.

Hi:
See if this works...
Run msconfig.
In the System Configuration screen, Boot tab, Advanced Options, if there is a check mark in the box next to Maximum memory. Remove that checkmark and save your changes.
Reboot and hopefully Windows recognises all the Ram ( minus the reserved ) after restarting.
Please give that a try, and post back and let us know if that frees up some system memory for you.
Paul

System with only Display Access

Hi,
I have the following question, is it possible to configure a system copy with only Display access (at a sap level or Oracle Display mode,
et cetera) without creating restrictions in an authorization level?
Kind regards,
Luis

Hi Luis,
I don't think this is possible, what you can do is create a system copy and assign display only authorizations to the users.
Regards
Juan
Please reward with points if helpful

Lync 2013 failed on windows 7 64-bit system with ErrorCode: 1624(0x658)

I have HP xw4400 Workstation (64bit) with windows 7 SP1.
LYNC 2013 is getting failed again and again with error "Microsoft setup bootstrapper has stopped working".
I checked setup log at %temp% and found something went wrong in c:\MSOCache\All Users but couldn't fix it
2014/09/02 17:58:28:477::[5164] Error: Failed to configure: {90150000-012C-0000-0000-0000000FF1CE} ErrorCode: 1624(0x658).
2014/09/02 17:58:28:477::[5164] Log level changed from: Standard to: Verbose
2014/09/02 17:58:28:477::[5164] Rolling back chain
2014/09/02 17:58:28:477::[5164] Error attaching to OSE, error 0x00000000
2014/09/02 17:58:28:477::[5164] Stopping running ose
I followed another TechNet article regarding MSO 2013 getting crashed with same error
http://social.technet.microsoft.com/forums/office/en-US/4b4c3176-b436-4f07-99c1-ea92091bd621/windows-7-64bit-office-2013-install-error
Thanks in advance

Hi,
Did you solve the issue with the help of Edwin provided above?
Please try to download the latest version of Office 2013 from Microsoft Website and then install it to check if the issue happen again.
Please also go to your computer manufacturer’s website and update all driver packages for your computer, such as: Audio drivers, Bluetooth drivers, System chipset drivers, webcam drivers.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

I am not able to start mac system in Mac mode which has windows 7 installed , My system starts only in Windows mode

I want to switch between Mac and Windows 7 Operating System. I am only able to start Windows. Please Help

If you reboot and hold the Alt key down after you hear the chime is the Macintosh HD shown as a boot option?

HT4796 migration assistant will not download to my XP pc, it says successful, then a window opens saying an error with only the option of QUIT

Using my iMac has been nothing but frustrating, out of the box and it works, yeah, plug in and power comes on...but then amatuerish tutorials, then try migrating data, phone support offered not help and a return call that somehow never made in the proposed 1 hour window.
All i want to do is migrate my data from pc to mac...but maybe i don't.

First on my pc,XP pro the Windows Migration Assistant says you have "successfully downloaded." Then I go to start>all programs>windows migration assistant. A single click and a Apple window appears with the two finder faces and displays the following message in total:
"An error occurred while preparing your information for transfer."
The Go Back option is grayed out, the only option I have is Quit.
This is all there is. Apple tech is preplexed after 2 hours. His solution is for me to purchase an auxiliray HD and call back.

Your ideas for setting up an Arch-64 system with only OSS software?

-oops, wrong place-
Last edited by Bob-Hur (2007-12-28 14:30:34)

Hi,
If you just want to connect to Exchange server from internal environment, please make sure the user mailbox is moved to and hosted in Exchange of your new company.
Then we can run the following command to check the autodiscover service which is used for Outlook connection from Exchange server:
Get-ClientAccessServer | FL Identity,fqdn,*autodiscover*
Get-AutodiscoverVirtualDirectory | fl Identity,*auth*
Get-ExchangeCertificate | fl
If the client can’t connect to Exchange server, we can try to setup Exchange account in Outlook manually to have a try:
https://support.office.com/en-us/article/Add-or-remove-an-e-mail-account-ff7c7735-6117-4b0d-aef6-8aa8a072f60f?ui=en-US&rs=en-US&ad=US#bm3
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

Lenovo G460 Windows 7 One Key Recovery with a Linux Partition

Hi All,
I recently bought a Lenovo G460 Notebook and installed linux on it to dual boot with WIndows 7. There was a problem with sound which I got fixed and everything is working fine now.
My question is:
Will me linux partition be there as it is If I recover the windows 7 partition using one key recovery?
How to create a rescue disk from One key recovery?
Thanks in advance.

Hi nilankaraja,
To create a rescue disk :: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/onekey_recovery_46_user_guide.pdf
On part of the Linux partition, are you asking if the partition will be saved ? Or is it something else?
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Am I able to install Windows 7 in Boot Camp with this HDD partition setup?

I recently upgraded from Snow Leopard to Lion, and my Boot Camp partition was obliterated beyond recognition. Fortunately I have backups, but I'm having issues re-installing Windows 7. This is what my disk looks like:
Mac OSX - Current Lion partition
Untitled - Where Boot Camp / Windows 7 used to live...
Shared - 1TB of shared data... Media/Documents/etc
This is the error I get when trying to install Windows 7 with Boot Camp Assistant...
From what I can tell, this means I won't be able to do it without wiping the Shared partition? Or is there a workaround I can use? I'd really hate to have to move all of it over to an external hard drive, since I don't have one with 750GB of free space handy...
And would this probably happen again once Mountain Lion comes out? I'll be getting that pretty much on launch, so should I hold off on messing around with this if I'll likely have to do it all again in a few weeks?
Thanks in advance to anyone who can help!
- Mark

Why don't you invest in a 1.5TB drive and case? And add to that a TimeMachine drive (and a small 40GB or even less "Emergency OS X" partition on it... a must - could even have clone of Lion and Lion Recovery on it, AND TimeMachine partition.
If you don't have a backup, it almost always will "rain" on the parade.
If you try booting from Windows 7 DVD and aim it at the parittion, what happens? tried?
To use BCA yes it is one partition and one way only.
You could remove " - " the UNTITLED volume and then expand Mac OS volume to fill that area, or plan for and setup Lion Recovery space too.
http://support.apple.com/kb/HT4718
People have managed. Usually planning ahead up front for a setup like this.
CLONE OS X and ~ or install Lion on an external drive and create a Lion Recovery partition.
http://www.bombich.com/software/ccc.html
http://macperformanceguide.com/Mac-HowToClone-backup.html
http://macperformanceguide.com/Mac-HowToClone.html

Automated deployments of Windows 7 on systems with multiple hard drives

Last week I helped a customer use MDT2010 to deploy Windows 7 to ThinkStation systems with multiple hard drives. The customer has multiple HDDs in the system and wants Windows to be installed to the HDD that is connected to SATA port 1. Unfortunately Windows does not always assign "Disk 0" to the HDD on SATA port 1 - in fact it is completely random what disk ID gets assigned to which SATA port. The bug is documented by Microsoft in KB937251:
http://support.microsoft.com/kb/937251
MDT2010 uses hard-coded disk IDs (0, 1, 2, etc) to specify where Windows gets installed. And because of the bug, sometimes Windows gets installed to the HDD on SATA port 1 and sometimes it gets installed to a different HDD.
The solution is to install Windows to the HDD identified by the "SELECT DISK SYSTEM" command of DISKPART. This will always return the disk that is connected to the lowest SATA port.
To configure this in MDT2010, use the following steps (refer to the attachment):
1. copy "FormatPartition.txt" and "SystemDisk.vbs" to your Scripts folder in the Deployment Share.
2. in your Task Sequence, disable the existing step called "Format and Partition Disk" (see TaskSequence.jpg)
3. create a new step at the same location called "Format and Partition Disk (custom)". The type is "General -> Run Command Line". The command line is " cmd.exe /c "diskpart /s %SCRIPTROOT%\FormatPartition.txt" "
4. on the main screen for Deployment Workbench, right-click on the Deployment Share and select "properties", then click on the "rules" tab
5. under section [Default], add the following entries (see Rules.jpg)
    - UserExit=SystemDisk.vbs
    - DestinationDisk=#DiskID#
    - DestinationPartition=1
Hopefully this info will help someone else!
Attachments:
MDT2010.zip ‏261 KB

Last week I helped a customer use MDT2010 to deploy Windows 7 to ThinkStation systems with multiple hard drives. The customer has multiple HDDs in the system and wants Windows to be installed to the HDD that is connected to SATA port 1. Unfortunately Windows does not always assign "Disk 0" to the HDD on SATA port 1 - in fact it is completely random what disk ID gets assigned to which SATA port. The bug is documented by Microsoft in KB937251:
http://support.microsoft.com/kb/937251
MDT2010 uses hard-coded disk IDs (0, 1, 2, etc) to specify where Windows gets installed. And because of the bug, sometimes Windows gets installed to the HDD on SATA port 1 and sometimes it gets installed to a different HDD.
The solution is to install Windows to the HDD identified by the "SELECT DISK SYSTEM" command of DISKPART. This will always return the disk that is connected to the lowest SATA port.
To configure this in MDT2010, use the following steps (refer to the attachment):
1. copy "FormatPartition.txt" and "SystemDisk.vbs" to your Scripts folder in the Deployment Share.
2. in your Task Sequence, disable the existing step called "Format and Partition Disk" (see TaskSequence.jpg)
3. create a new step at the same location called "Format and Partition Disk (custom)". The type is "General -> Run Command Line". The command line is " cmd.exe /c "diskpart /s %SCRIPTROOT%\FormatPartition.txt" "
4. on the main screen for Deployment Workbench, right-click on the Deployment Share and select "properties", then click on the "rules" tab
5. under section [Default], add the following entries (see Rules.jpg)
    - UserExit=SystemDisk.vbs
    - DestinationDisk=#DiskID#
    - DestinationPartition=1
Hopefully this info will help someone else!
Attachments:
MDT2010.zip ‏261 KB

2 Different SAP systems one with only WM and other no WM system

Hi All,
We are having trouble to implement 2 different SAP systems. In one SAP system only MM & IM will be there. The other SAP system only WM system will be there.
In the SAP system with only MM / IM system all the materials will be valuated where as the SAP system with only WM system, there won't be any valuations. It just serves as a 3PL warehouse for the first SAP system which has only IM environment. Both are acting as a different companies.
We planned to interface all the PO, Inbound Deliveries and also the Sales order and deliveries to WM SAP system and develop a custom program to do PGR / PGI in WM system and then transmit the PGR / PGI details to the SAP system (which has only MM / IM environment). The WM system also uses the RF guns. But not so sure whether this can help.
Can you please help me how to configure the WM system. I will be very grateful for your help.
Regards,
Vansh

Hello,
there is a standard SAP solution: [Decentralized Warehouse Management (LE-IDW) |http://help.sap.com/saphelp_erp60_sp/helpdata/en/51/803c35975f0054e10000009b38f839/content.htm]
for your scenario.
Andrzej

HT204406 ITUNES MATCH Windows 7 Error message on upload (Step 3) from PC - 3 times get "Windows close program [iTunes]" with only 30-50 of 500+ songs. Help!

ITUNES MATCH - Need help. Windows 7 Error message on upload (Step 3) from PC - 3 times get "Windows must close program [iTunes]" with only 30-50 of 500+ songs. Anyone have this issue of iTunes crashing?

Exactly the same problem here. As far as I can see this problem has been around since Match was first released with no action from Apple to rectify it. I've spent days trying to get this to work now and unless I get a fix soon, I'm going to pull my Match membership and ask for a refund because this is not what I signed up for...

Windows Server 2008 black screen with mouse *PLEASE HELP*

Hello fellow techs,
I have been tearing my hair out for the past 12hrs on this issue.
About 3 weeks ago, one of our clients reported that they were experiencing
issues on the network so one of the staff went into the server room and noticed
the screen was black with only the cursor. As they couldn't reboot, they
decided to hold the power button to power it off. When they powered it back
up, it went passed the windows loading
splash screen, and again the screen is black with
the mouse pointer in the center of the screen.
I am diagnosing the server and find that at the black screen, I’m able to move
the cursor and beyond that nothing happened. I started in safe mode with the
exact same results.
I have been trying many different solutions from posts that I have found in
Google but no change.
From other machines you can type \\servername in
the run box and see the shared folders, as well as ping it.
This is a very urgent request as I need to have the Server back up and running
by tomorrow.
I am quiet willing to pay for phone support with anyone that can assist as soon
as possible. I am happy to transfer founds via Paypal.<o:p></o:p>
PLEASE HELP!

Hi,
I agree with sm, you should give us more details. Also you should use sfc /scannow
command to scans the integrity of all protected system files and repairs files with problems when possible. For more details, please refer to the following article.
Sfc
http://technet.microsoft.com/en-us/library/ff950779.aspx
Before going further, would you please let me know whether there were any changes on the affected server? Has windows update or any new device been added? Please also check your shadow copies.
The Windows Server black screen may be caused by them.
In addition, there are similar questions, please refer to.
Windows Server 2008 black screen
http://social.technet.microsoft.com/Forums/en-US/463b529b-26a6-4d5d-88f5-7d8b3460d165/black-screen-windows-2008-r2
Windows Server 2008 and the Black Screen of Waiting
http://projectdream.org/wordpress/2009/03/03/windows-server-2008-and-the-black-screen-of-waiting/
By a way, you also can be able to boot into last know good configuration to solve the trouble. You can refer to the following similar question that provide the detailed operations.
Windows Server 2008 black screen with only the mouse pointer showing
http://social.technet.microsoft.com/Forums/en-US/5c878af8-78f2-430d-9530-a0e5ad73ff03/windows-server-2008-black-screen-with-only-the-mouse-pointer-showing
Hope this helps.
Best regards,
Justin Gu

Windows 7 toolbox on system with only 2 partitions

Similar Messages

Maybe you are looking for