Windows 7 Ultimate (64) clean install on HDX9004TX

A clean install on my HDX9004TX went virtually incident free with the following exceptions:
Screen intermittently blanks for a few seconds and notice advises "Display driver stopped responding and has recovered".
This initially happened with driver installed by Win7(did not record version), I then updated driver to "ATI mobility radeon HD2600XT v8.632.1.2000 (Aug 09)" but still have with same result.
Cannot locate driver for finger touch controls across the top of the keyboard.
This question was solved.
View Solution.

Hey okz00k,
Great to see you trying Windows 7 (64bit) ultimate on the HDX9004TX!
The Quick launch software should be located here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-56178-1&lc=en&dlc=en&cc=ie&...
This should enable you to get your quicklaunch bar working. On your Display problem would you be able to tell me where you installed th driver ? Was it via the HP website, ATI or via Windows Update ?
Also have you tried doing Windows Update to see if there is any driver updates there ?
Let me know how the Quick launch software goes.
Thanks,
Mike
Thanks,
Michael
I am a HP Employee! Woot!

Similar Messages

Windows Vista Ultimate doesn't install on Satellite M40

Windows Vista Ultimate doesn't install on this notebook. Vista hangs after installation and doesn't boot up. Does anybody know what the problem is?

Hello
As far as I know older units are not Vista supported. I believe it is not necessary to say why. Satellite M40 is older notebook model and definitely not Vista supported. Many newer WXP preinstalled notebooks are Vista supported but Toshiba has for each model designed new BIOS version and before installing Vista the BIOS update must be done at first.
I can imagine that new BIOS is needed for M40 too but as I said before this machine is not Vista supported. I am very interested if someone will report more about Vista on Satellite M40.

I reinstalled acrobat pro 9.0 on windows 7 Ultimate 64, it installed OK, When I open i get a large white popup screen which i cannot close... what to do?

I reinstalled acrobat pro 9.0 on windows 7 Ultimate 64, it installed OK, When I open i get a large white popup screen which i cannot close... what to do?

Hey jeroenb16613921,
Please specify exactly when you get this white popup screen. While opening a PDF or launching Acrobat by double-clicking on the Acrobat icon.
If it comes when opening a PDF, then where is this PDF actually stored?
Let me know more on the same so that I can analyze the issue.
Regards,
Anubha

Windows 7 Ultimate isn't installing on my iMac. Setup was unable to create a new system partition or locate an existing system partition

I have a 21.5" iMac (Late 2012) running OS X Mavericks. I'm trying to install Windows 7 Ultimate via Bootcamp but whenever i get to the setup part it goes wrong
These are the steps I followed
I selected all the options since I didn't have the drivers or an install disk
it copied the Windows 7 iso image, downloaded the support software, and saved the support software to the flash drive (8GB)
I selected a partition size - I gave windows roughly 100GB
and I let it install
Right now I'm at the part where it says " where do you want to install windows? I selected the bootcamp partition and formatted it. It now says
"Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information"
WHAT DO I DO?

I had to read the apple instructions several times before they started to make sense. I burned my iso onto a DVD and had the required USB for support software. Are you trying to use the single USB method?
This article has a lot of info on the single usb method

Issue with Bootcamp 5.0 and Windows 7: Ultimate 64-Bit Install

HERE are the specifications of my iMac.
I am trying to install Windows 7 Ultimate 64x on a 150GB partition i created using bootcamp 5.0. I get to the point where it finalizes the windows setup, and then it says "Setup Up Desktop for first use" or something of that nature, it restarts then, and goes straight to a black screen with a black cursor. I have tried to get to the BIOS to change the boot order (thinking it may be something to do with the boot order) but I won't even let me access that! Any fixes would help a lot!!
I was using parallels before this, but I want a seperate partition so I can play games that are too high demanding (graphics wise) to run in a VM, the crash on start every time. Some run, but very choppily.
Also, I am running the latest edition of mountain Lion if that helps...

ANYONE!?

Windows 8.1 SSD clean install

Ive bought a Samsung Evo 250GB Solid State Drive and im planning on putting it in my Lenovo G505s. I was told that i cant just copy and paste my windows installation from my HDD to the SSD because it would not be optimized for the SSD and it would be bad for its health. That means i have to go and buy a windows 8.1 key and iso then do a clean install on the new SSD. I have some questions:
1. Will my laptop work without all the lenovo software? I think ive uninstalled everything except for lenovo support and energy managment anyway.
2. If i do decide to install the lenovo software, is there a Lenovo Windows 8.1 ISO i can use to install 8.1 along with all of the lenovo software?
3. If i dont decide to lenovo software, where can i download and install the latest version of Onekey Recovery? I still want to be able to use it and the recovery button next to my power button on my laptop. Will i stil have to partition out 20GB? Is there anyway to avoid that or make it smaller? I cant even hold my backup in there because its too small.
4A. I saw on one of the stickys you had to do a workaround in order to install Windows 8.1 Pro. Will i have any problems installing Windows 8.1 Core?
4B. I also saw that some people had trouble installing Windows 8.1 Pro when they used a live USB. Will it work fine if it was Windows 8.1 Core? Or do i have to use a Live CD?
5. Is there an all-in-one driver&bios installer/updater anywhere after installation of 8.1? Or do i have to download and install every driver in this list for 8.1 64bit: http://mobilesupport.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g...
6. Which way do i format my SSD?
7. I know the evo comes with a 3-year manufacturer warranty, but would anybody recommend also getting a squaretrade warranty? Is it worth it?
8. Is there anything else im missing after i install 8.1?
I've ask a lot of questions. Thanks for all your help!
Solved!
Go to Solution.

hi Rangerguy2,
Regarding your questions:
1. Will my laptop work without all the lenovo software? I think ive uninstalled everything except for lenovo support and energy managment anyway.
- Yes the laptop will work fine even if you only have the Lenovo Energy Management software installed.
2. If i do decide to install the lenovo software, is there a Lenovo Windows 8.1 ISO i can use to install 8.1 along with all of the lenovo software?
- If the preloaded OS is Windows 8 (Core Edition) , you will only able to use a Windows 8 (Core Edition) recovery disc (ISO image) without issues as you will get an OS activation issue with a Win8.1 ISO (the product key on the BIOS is only for Win8 Core).
3. If i dont decide to lenovo software, where can i download and install the latest version of Onekey Recovery? I still want to be able to use it and the recovery button next to my power button on my laptop. Will i stil have to partition out 20GB? Is there anyway to avoid that or make it smaller? I cant even hold my backup in there because its too small.
- The OneKey Recovery solely depends on the recovery partition and structure. If you'll be using the Samsung SSD as your boot drive, you won't be able to use the OneKey Recovery feature (even cloning the HDD to the SSD is not a guarantee).
- You can, however, create a similar OKR-like feature by using Acronis (see Startup Recovery Manager)
4A. I saw on one of the stickys you had to do a workaround in order to install Windows 8.1 Pro. Will i have any problems installing Windows 8.1 Core?
- If the preloaded OS is a Windows 8 Core, you may get a "The product key entered does not match any of the Windows images available for installation. Enter a different product key" error. In this case, you will need to apply the fix from this microsoft article.
4B. I also saw that some people had trouble installing Windows 8.1 Pro when they used a live USB. Will it work fine if it was Windows 8.1 Core? Or do i have to use a Live CD?
- AFAIK, it's the same case whether you're using a DVD or a USB installer if the error message is the same as in Question 4A. You will then need to apply the fix from this microsoft article.
5. Is there an all-in-one driver&bios installer/updater anywhere after installation of 8.1? Or do i have to download and install every driver in this list for 8.1 64bit: http://mobilesupport.lenovo.com/us/en/products/laptops-and-netbooks/lenovo-g-series-laptops/lenovo-g...
- If you decide to clean install Windows 8.1 on the SSD, it will be best if you download all Windows 8.1 drivers first (eg. on a flshdrive) before installing Windows.(there's a Driver Grabber app designed by lenovo but this isn't applicable / compatible yet for this model).
6. Which way do i format my SSD?
- If you have a Samsung Laptop Kit, you can format the drive inside Windows. Otherwise, you can format the drive from the Windows 8 installation screen.
- Link to picture
7. I know the evo comes with a 3-year manufacturer warranty, but would anybody recommend also getting a squaretrade warranty? Is it worth it?
- Seing that the MTBF of the Samsung Evo is 1.5 million hours, I don't think a squaretrade warranty is necessary (after 3yrs, higher capacity and cheaper SSDs will surely be out in the market) but getting an extra guarantee is good to protect your investment.
8. Is there anything else im missing after i install 8.1?
- I think you're good to go. Just ensure you run Windows Update to get the latest patch and bug fixes for the OS.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Satellite U500 - Windows 7 64bit (after clean install, wireless issues...)

Good night,
I've just installed windows 7 Professional x64. Now I'm experiencing some wireless issues such as constant breaks on the wireless connection (every 5 minutes more or less). I've tried to install the lastest drivers for the wireless LAN adapter, without success.
By the way, I have a Toshiba Satellite U500.
Any help? :)

It's a U500/00k? Model PSU9MA-00K013.
I havent actualy managed to access windows at all. The install problem has come up "out of the box" so checking any settings is impossible.
It just keeps looping back to the same error message. The only software I have is what came on the hard drive, and an XP istall disc that came with the package. According to the manual, if i use the XP disk it will wipe XP completely.
So frustrated right now.

5.0.1 with Windows 7 64 bit clean install.

Hi,
I had no problems running Desktop with same 1 month old first tier laptop (Dell Latitude 6500) under Vista SP2 and it'sa no go with 64 bit Windows 7. I've updated BIOS and all of Dell's drivers to current releases. I see the RIM virtual serial ports COM3, 4) and don't see any application errors in event viewer.
Any help would be appreciated.
Thank you.

Hi there!
I wound up doing a full de-install and re-install when I updated to Win7 Ultimate x64...here is the process:
I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

T400 Windows 7 or Vista Clean Install - Can't Detect Hard Drive

I've attempted to install Windows Vista x64 and Windows 7 x64 using retail copies of both OS's on my T400. Neither OS can find the hard drive during the install process. I've downloaded every driver possible from Lenovo and loaded them via USB during the install, with absolutely no luck. I've installed Ubuntu in the meantime to have a usable computer, but I really need Win7 on there, so I have to figure this out. Any solutions? (and telling me to go download the driver isn't going to help me). Also, I've messed around with the AHCI setting in the BIOS, but that didn't help either.
Solved!
Go to Solution.

Weird. Win 7 Pro 64 installed on my T400 without any issues that I can recall. I realize that doesn't help you much
I was doing a clean upgrade install using a Microsoft upgrade DVD over the top of a Vista installation.
Since you've already tried fiddling the ACHI/IDE mode the only other thing I can think is something about your initial disk partitioning or formatting (or lack of same) confused the installers. (I realize a confused MS installer is hard to imagine...)
Maybe fire up your Ubuntu live CD and dd some zeros to the first few sectors of your drive and try again. Or format the thing w/your choice of FAT32 partitions and see if that makes the installer(s) happier.
What model drive are you using? Is it the original drive (not that it should matter, mine wasn't)? What was installed on the machine initially?
Just pulling stuff out of my <....>,
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Itunes 64 bit version 11.1.5 windows 7 ultimate Won't Install

everytime i uninstall and reinstall it always rollingback im so frustrated with this itunes version 11.1.5

Hello xHarvesx,
It sounds like you have installed the 64 bit version of iTunes, but you continue to the get an error message that suggests to download the 64 bit version any time you connect your iPad. I understand that you have already uninstalled and reinstalled iTunes, but sometimes you may need to uninstall additional components related to iTunes to completely remove it from your system.
I recommend following the steps in this article to completely uninstall iTunes:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Once you have completely uninstalled iTunes, you can download the 64 bit version of iTunes for Windows here:
iTunes 11.1.5 for Windows (64-bit)
http://support.apple.com/kb/DL1615
Thank you for using Apple Support Communities.
Best,
Sheila M.

Tx2000z Window 7 upgrade or Clean Install

Does anyone have any proceedures/advice on upgrading my tx2000z from windows vista Home premium to windows 7. I'm thinking about it, but the blogs are scaring me a bit. Driver problems, etc. I'd appreciate any advice. Thanks

UPDATE:
1. I've also installed the Synaptics Touchpad (mouse) driver. But the multi touch feature is not working. It worked earlier on Win Vista.
Any of you have the same problem?
2. When I installed the Intel matrix storage monitor driver (I'm not sure what is the need of this?), when the system restarted the Harddisk was making very loud noice when the Windows Login screen appeared. (I guess that is when the application actually loads (at the login screen) and is causing that sound).
I was scared of damazing the hard disk and I've uninstalled that driver and the sound is gone. now it runs nice and smooth.
Do we need to install this driver at all? Whats the use? Anybody else has the same problems?
3. Also, what is the use of ReadyComm software?

Windows 7 64 bit clean install

Hello,
I have a Z61t 9440CTO, T5500 CPU, 3GB RAM.
I would like to replace my HDD with 60GB SSD and make a fresh install from Win7 64 bit DVD. Is this doable? Does BIOS v3.03 support Win 7 64 bit?
Any suggestions would be greatly appreciated.
Solved!
Go to Solution.

Welcome to the forum!
You should have no problem installing W7 on a SSD in that Z61t.
However, some SSDs do not play nice with older ThinkPads. Which SSD are you planning on using?
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

L7780 All in One - Windows 7 Clean Install - Error when printing

I have a huge problem with a failry new L7780 all in one. I has stopped printing from my laptop. I recently upgraded to Windows 7 with a clean install from Vista....ergo I formated the disk and then reinstalled Windows 7 . And, now every time I print I get the following message "the job has failed due to an error on the printing system"
The printer is selected as default.
The printer does connect through wireless onto my network , and does appear on my PC as connected. However, once I press print after a few seconds it seems to disappear.
I have not altered any network settings and MAC address is off on my router. It was working fine on 2 Home pc's running XP, worked great with Vista. And its only this one Laptop with Windows 7 that can't print to it for some reason.
However, sometimes when I have shutdown...all of a sudden it prints out what I asked it to 30 minutes ago.
I have tried installed and re-installing drivers.
I have tried forced start ups .
Switching it off at the mains.
Resetting the network adpater.
I can only think at this stage there is a compatibility issue with Windows 7.
Any clues? Any help anyone can offer.
Cheers,
Steve
This question was solved.
View Solution.

If this sounds like your issue:
After installing the product on a network, you turn the computer off, and then on, and the product loses functionality. The product no longer prints and the product icon disappears from the Devices and Printers menu in Windows 7 (64-bit).
Try this fix:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-89191-1&lc=en&dlc=en&cc=us&...=
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Unable to reactivate Windows 7 after clean install - help!

Hi,
Yesterday I formatted my C:\ drive in order to perform a fresh install of Windows 7 Home Premium. I am unsure of whether I was using 64 or 32 bit. I didn't have an install disc so borrowed a friend's retail Home Premium disc and used my OEM key to install. This didn't work and I am unable to reactivate my copy of Windows 7. Having read some other forum posts it would seem that I should have made a backup before formatting my hard drive, but it's too late now.
How can I successfuly reactivate my OEM copy of Windows 7? I am reinstalling on the same exact PC so believe that this should be possible.
Thanks
sad_muso

Hello @sad_muso,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are not able to activate your version of Windows 7 after a clean install of the operating system, and I would be happy to help you!
To reactivate Windows 7 on your desktop computer, I recommend following the steps in this document on Windows 7, Vista, XP Product Activation.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Windows 7 Clean Install Elements 7 Install

I am going to upgrade Windows Vista to Windows 7 with a clean install.
I will have a backup of my hard drive.
After I do the clean install of Windows 7 and install Elements 7 how do I get Elements 7 back to the way it was in Vista. I am particularly concerned about restoring all the Elements 7 tags.
Thanks,
Bob

If your photos reside on the C drive only, and you put your photos and catalog folder back to the same exact locations they had on your Vista system, then PSE 7 should be able to open the catalog just fine. Do Help > System Info in the Organizer to find the location of your catalog folder.

Windows 7 Ultimate (64) clean install on HDX9004TX

Similar Messages

Maybe you are looking for