Windows 7 Ultimate x64 Drivers not working

When I installed Windows 7 Ultimate N x64 on Boot Camp, it worked fine, I could get into the Windows Partition no problem. When I try to install the Boot Camp drivers for Windows, it says that it can't run the program or that it is incompatible with my version of Windows. I can't connect to the internet or use the trackpad. Any help? It was a subscription version of Windows 7 Ultimate from MSDN.

How did you obtain the BC drivers? Please post the year/model of your Mac.

Similar Messages

  • LaserJet 1020 Windows 7 x64 driver not working!

    Hello. I have problem. I have recently installed Windows 7 x64, and when I tried to install driver for my LaserJet 1020 from this site, an error appeared.
    First, when I launched the driver installer, I agreed with license agreement and proceeded. Than, loading bar appeared, it came to 3 division sticks in it and text above was like "Preinstalling the driver files". Then, suddenly, for a split-second "Copying files to the hard drive." text appeared, than again "Preinstalling the driver...", and it appeared again for less than a second, and again, and again... Than, after a few times, it just crushed, with Windows message "Printer Software Installer" is not working". 
    And one more: in Program Files -> HP folder there are lots of driver files (which seem not to be working) and another HP folder with same file and HP folder in it... Recursion of some kind, I think.
    So, what should I do? I can't use my printer for a long time because of this driver!
    I'm haven't spoken English for a while, so, if I explained something strange, ask, I'll try to explain better =)
    This question was solved.
    View Solution.

    Who is awesome? I'm awesome! ^_^ 
    I used russian version of the driver, worked flawlessly =) 
    Take it from here. Glad, if I could help =)
    http://ftp.hp.com/pub/softlib/software11/COL22237/bi-58689-4/lj1020_1022-HB-pnp-win64-ru.exe

  • Windows 7 (x64) taskbar not working after using digitizer in tablet mode. x61t.

    Hi,
    I have Windows 7 professional x64 on my thinkpad x61t. I updated all drivers from windows update and also from lenovo.com. So far it's been about two weeks with no problems. But when I started using tablet mode (fold) for lecturing a class (clone video output) in tablet mode, the taskbar stops responding to my clicks. No error message or anything, but I just can't press the start button or anything on the taskbar using a stylus. The point on the screen moves and follows my digitizer/mouse correctly, but I can't press anything. The keyboard works though, so I can restart the computer to get it back working. What could be causing the problem?
    I've tried installing lenovo-wacom dual touch driver, but it only caused more problems, so I had to remove it and use the windows update driver.
    x61 tablet / multitouch / 3GB Ram / intel wifi / bluetooth

    Workaround: Press 'Control + Alt + Del' to open task manager, and click 'Cancel'.
    Stylus worked okay during teaching using Onenote. The problem starts when I start clicking the start menu and try opening other programs while in tablet mode. Once the loss of pointer, the only thing works is the keyboard.
    I found a workaround for this. Press 'Control + Alt + Del' to open task manager, and click 'Cancel'. Then you can gain control again, at least until the next time you loose mouse/tablet control.
    I currently have hotkey driver and sound driver (final driver for win7). For system interface driver / tablet button driver / tablet shortcut menu, I installed beta drivers. All other drivers were updated through Windows Update.
    I'd appreciate if anyone finds a fix for this problem.
    -Hoon

  • U330 Windows 7 Drivers Not Working

    Hello,
    I have recently been in the process of updating all of my drivers on my u330-2267EU to the latest Windows 7 versions. I had been waiting for this update to the drivers site for some time since I was able to get Windows 7 installed before the Oct 22nd release. I am running Windows 7 64bit and I am running into some trouble with these newest drivers not working correctly.
    u330 Driver Download Site (Using Win 7 64bit Versions): http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=16
    Switchable Graphics: there are 2 new Windows 7 drivers related to video that I downloaded. One referring to the discrete ATI graphics card, and the other to the Intel Graphics Media Accelerator. After installing both of these, setting BIOS for Switchable Graphics, and running the Switchable Graphics program from the desktop after bootup, brings up the desired menu with the option to switch from power saving gpu to the high performance gpu. When I click the "high performance gpu" button, the screen flickers and fades to black momentarily as it should, but when the screen returns and after waiting for a few minutes no switch is made, it just stays in the powersaving gpu. Suggestions?
    Power Management Software: I also downloaded Lenovo's Energy Management Windows 7 driver for the u330. After installing the software I was initially able to bring up the menu to change power options, but the options that I chose would not make any apparent changes. Actually, after installing the program, it made my screen incapable of changing its brightness using the "function + arrow" button combination. Also, no longer when i change my default power windows power options will it adjust my screen brightness. It just stays the same no matter what. The only way that I can now change the brightness of my screen is by going into the graphics settings of the Intel GMA and change the settings there, but that is a completely horrible way of having to do that.
    So there you have it, after all this waiting I still dont have the ability to utilize the switchable graphics nor properly use the Lenovo Power Management software. Oh yea, and I still cant adjust the brightness of my screen. I have re-downloaded and re-installed these drivers many times to try to get them to work correctly, but so far no luck.
    I would greatly appreciate any help on the subject or at least have the knowledge that someone at Lenovo has noticed these problems and a fix is coming soon
    thanks!
    Solved!
    Go to Solution.

    check out our thread here
    http://forums.lenovo.com/t5/Windows-7-Launch/U330-Windows-7-Drivers-Problem-amp-Solutions/td-p/16716...

  • Audigy Platinum Ex Windows 7 SPDIF IN not working

    Audigy Platinum Ex Windows 7 SPDIF IN not working? I have an old Audigy Platinum Ex that has served me well, until now when I have a new Windows 7 x64 PC (RTM). SPDIF IN no longer works, though everything else does (including SPDIF OUT). I've tried the current and beta drivers for the card, and no difference.
    In Windows Vista x64 I could use ASIO drivers with my M-Audio ProFire 60 while using the Audigy for PC audio. Most often this was for skype, which I would set to use SPDIF IN/OUT which I then connected to the ProFires SPDIF OUT/IN. Using the ProFire mixing tool, I could control which mics and levels went to the Audigy while not interfereing with the ASIO drivers recording the mics. The ProFire also recorded the SPDIF OUT from the Audigy to caputre the person on Skype to their own audio track. This is a podcast producer's heaven, and I miss it!
    If it's a known issue (SPDIF IN / Win 7), I've had this card through 4 PC upgrades and it's served me well enough I don't mind buying new. The Creative Sound Blaster X-fi Elite Pro looks to be the current version of my Ex - are there any Windows 7 issues currently that would stop me from using it in the role above? I will miss the FireWire port, a shame they dropped that.

    Well basically it is possible, and I've found this out. Apparently Dell released a driver or something that allows it to work, but then only if you install a 3rd party modified xp version of the creative suite. I don't remember where I found it, but it was through google... Using some term including x-fi, dts, and vista.... Can't seem to find it now. Anyway, it had a download for the whole creative suite that was modified from the xp version for Vista, however it was buggy as hell, caused driver issues and blue screens, and ended up causing me to have to reinstall Vista altogether again. In other words, it's possible, but I don't recommend it until it's officially supported... Don't know when this will be yet... *crosses fingers*
    Luckily I've got a dual OS system with XP too, and I switch to that when I want to use my Xbox 360... However due to Microsoft also being terrible in that department... I now get entertainment off of its 3 red lights... (For those of you who don't know, 3 red lights = hardware error. Sending into microsoft for repair typically is a 2 month process... I'm still waiting on my prepaid shipping box to arri've and it's been 4 days... Will be a similar wait to get it to them, 4-6 weeks for them to actually repair, and another week or so to get it all shipped back). Although even when the console worked, my dsl modem sometimes cut out when playing on Xbox li've and dropped signals, reported errors, etc.
    What is with the companies producing technology nowadays? I just want to play Gears in 5. on Xbox li've... *cries*Message Edited by Supercoolyo on 07-22-20070:54 AM

  • Satellite T210 - Windows 8 x64 drivers and BIOS update

    Can anyone from Toshiba Support tell me if and when we can expect Windows 8 x64 drivers for Toshiba T210? The equipment is pretty classic. I am sure this is very easy to compile available drivers into the official release
    I also wanted to know as when Toshiba T210 finally gets BIOS update. Its current BIOS version is 1.60 while many other similar and earlier models jumped to 2.2 BIOS version and above
    Regards,

    This is user to user forum so you will not get answer from Toshiba support directly.
    What I can say is follow:
    All about Win8 on Toshiba notebooks you can read on http://www.toshiba.eu/innovation/generic/windows8-message/
    Under Toshiba Compatibility Matrix you can check if your notebook model is supported for Win8 or not.
    What to say about BIOS. Toshiba doesnt offer BIOS update if there is no some critical problem or some reason for that. If your piece of hardware works well and stabile there is no reason for BIOS update. What do you expect should happen with newer BIOS version?

  • Adding Windows 7 x64 drivers to Windows Server 2003 printserver

    Hello,
    I've recently added a HP Elitebook 8530W running Windows 7 64 bit, to a network containing only 32 bit systems.
    It's all working fine except I cannot get the printer, a HP Laserjet 4345MX, shared via a HP ML350 server running Windows Server 2003 SP2, working on it.
    I have downloaded the appropriate Windows 7 x64 drivers from the HP website (the PCL6 v5.2 package) and tried adding these on the server (through printer properties, sharing, additional drivers, under the x64 box), but it is refusing to accept these drivers (I've tried every .inf in the package).
    If anyone could offer any advice on how to get this setup working that'd be great, thanks
    Marijn

    Hello,
    I've recently added a HP Elitebook 8530W running Windows 7 64 bit, to a network containing only 32 bit systems.
    It's all working fine except I cannot get the printer, a HP Laserjet 4345MX, shared via a HP ML350 server running Windows Server 2003 SP2, working on it.
    I have downloaded the appropriate Windows 7 x64 drivers from the HP website (the PCL6 v5.2 package) and tried adding these on the server (through printer properties, sharing, additional drivers, under the x64 box), but it is refusing to accept these drivers (I've tried every .inf in the package).
    If anyone could offer any advice on how to get this setup working that'd be great, thanks
    Marijn

  • Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - not working for one user - working for another

    Hi,
    I recently have an issue with Synaptics touchpad on HP Mini 110 Windows 7 32 Bit - NOT working for one user - working for another.
    Windows 7 updates recently installed ???
    By checking the device properties on the user that works - "Synaptics PS/2 Port Touchpad 13/10/2011 Version 15.3.29.0"
    When the other user logs on, the touchpad works for a few seconds, then a displays a black square with a red diagonal line through it, then the touchpad won't respond. Trying to use the keypad to navigate to system diagnosics or anything to find further info is useless....

    Hey eagle_no11,
    Thank you for joining the HP Support Community!
    I will do my best in assisting to hopefully get the TouchPad to work on the second user profile.
    What I would like to start off with, is to restore the original Synaptics drivers onto the profile that is not working correctly. I have included the document Using Recovery Manager to Restore Software and Drivers (Windows 7).
    Once you have installed the original drivers, you will need to complete all updates from both HP, as well as Windows. For these updates, if you open the HP Support Assistant, and select Maintain, you should see an option for updating.
    Please let me know how these steps do work out for you.
    Have a great day!
    I worked on behalf of HP

  • Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)

    Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
    what cAN i do to make it work?please help

    Hi:
    If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1

  • Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV]

    Bluetooth Driver In Windows 8.1 is Not Working [Model :- F0D96EA#ABV] 
    When I connect the phone he load and then says no connect

    Hi,
    Please try the following driver for "MediaTek (Ralink) Bluetooth":
        http://ftp.hp.com/pub/softpaq/sp65501-66000/sp65804.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Windows 2008 R2 does not work on Sunfire X4170

    Hi, I recently bought a used X4170 server and have a weird problem. Windows 2008 R2 does not work, but 2012 does. I tried RTM version and a version with SP1. The problem is this:
    After installing, I set the password and windows just displays a blank desktop, sometimes it boots but freezes soon after - the mouse cursor moved but nothing else works.
    Booting in Safe Mode works and Windows do not freeze. The Event Log contains lots and lots (about 20 per second) of these entries:
    Log Name: 
    System
    Source:   
    Microsoft-Windows-WHEA-Logger
    Date:     
    6/21/2014 12:24:59 AM
    Event ID: 
    17
    Task Category: None
    Level:    
    Warning
    Keywords:
    User:     
    LOCAL SERVICE
    Computer: 
    WIN-SOGS2TPM334
    Description:
    A corrected hardware error has occurred.
    Component: PCI Express Root Port
    Error Source: Advanced Error Reporting (PCI Express)
    Bus:Device:Function: 0x0:0x0:0x0
    Vendor ID:Device ID: 0x8086:0x3406
    Class Code: 0x30000
    I have tried updating the driver for this device (downloaded from Intel), no difference. Is there a way to make Windows 2008 R2 work on this server?

    Hello
    Thank you for the update.
    Please refer the below Knowledge document related to this issue:
      Windows BSOD WHEA_UNCORRECTABLE_ERROR(124) & correctable WHEA events when disabling network ports on X4170M2/X4270M2 (Doc ID 1576683.1)
    However above document talks about X4170M2, I would suggest you to follow and if issue persist, please open Service Request with Oracle to diagnose further.
    Best Regards
    Bhavyesh

  • I have triple pointers on PSE7 & Windows 8. Windows 7 solution does not work

    I have triple pointers on PSE7 & Windows 8. Windows 7 solution does not work-can't find how to change DPI

    Right click on your Desktop and select Screen Resolution
    Then in the screen that comes up, click on Make Text or Other Items Larger or Smaller
    Then move the slider under Change the Size of All Items to Smaller and restart windows 8

  • Windows media player will not work as no DVD driver

    Had to format disk (trojan) & reinstall Windows XP home. Now Windows media player will not work as no DVD Driver, can I download from Toshiba site?

    Hi
    Usually the Windows media Player is not able to play DVD movies IF no plug-ins were installed.
    To watch DVD movies you can use the programs like WinDVD or PowerDVD.
    Such programs were designed especially for the DVD playing!
    But you can also visit the Microsoft website and search for plug-ins for Windows Media player.
    Then you could download and install it to play DVD with WMP
    Best regards

  • I am running Office 2013.  Trying to sync my reminders with my iphone using icloud for windows, but it is not working.  Can anyone please help?

    I am running Office 2013.  Trying to sync my reminders with my iPhone 5c version 7.1.2 using icloud for windows, but it is not working.  Can anyone please help?

  • Windows media player is not working

      windows media player is not working  while i am playing any audio/video. it is saying    server execution is failed

    Please post your Product number (please don’t post your serial number).
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Maybe you are looking for