Windows 7 unable to access ReadyNAS

Hi,
I'm having a lot of trouble getting access to my NAS from my Windows desktop computer. I use the NAS to backup my DVD-collection to use it with my media center, and it used to work perfectly without any problems. I have no idea when the problem started,
as I have not used or accessed the NAS since around christmas, but between then and now my Windows 7 computer will no longer access the NAS-shares. I'm unable to map the share through Explorer, and it won't show up on my network. I've been googling this problem
for days now, and I've tried a lot of different "solutions" without any luck, but I figured I should ask here.
I'm running Windows 7 Ultimate 64bit - I'm unable to see the SMB-share under Network, although it does show up as a media device if I enable DLNA, but clicking it will just attempt to open the NAS' admin GUI in my browser. XBMC is also unable to map SMB-shares,
which is where my problem turns really annoying. It does respond when I ping the IP. I've also made sure that Network Sharing is enabled in my homegroup settings.
The NAS is a Netgear ReadyNAS Duo V2 - I've made sure it's on the same Workgroup as my computer. The sharing option is SMB, but it has enabled ReadyDLNA, UPNP, HTTP, HTTPS and genie (I don't know what the last one is...).
Again, I used to be able to see it in Windows Explorer and it mapped beautifully before. I have two laptops running Ubuntu (12.10 and 13.04), and my desktop also dualboots Ubuntu 14.04. While running Linux, I can access the Samba-shares again and navigate
the NAS without any problems. Everything is accessible, and I can both read and write to both disks in the NAS. The problem is only there while I'm running Windows, and as this is the OS I prefer, it's starting to bother me a lot. I have no idea what changes
I've done lately, but something has obviously changed on my Windows 7-partition which has removed the option of mapping samba-shares in Windows.
I hope someone here can give me a tip that finally helps me with this issue before my hair turns grey.

in your ReadyNAS there should be some user or folder rights settings.
Double check the user or folder rights settings.
or check out this link:  ReadyNAS Share Access
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Similar Messages

  • Windows machines unable to access smb shares

    I know many people are having problems with smb on osx server, but my issues seems very basic, so I will try to ask for help here.
    Basically, I have set up a single folder for sharing on a Mac Mini running OSX Mountain Lion Server. Directory services are provided by a WIndows 2003 server, and I have joined OSX Server to that, and am able to see all AD users and groups correctly. I have checked the boxes specifying I wish to share as afp, smb and webdav and also made shares accessible to guests.
    Now, if I use a mac client, I can correctly browse the afp and smb shares, and the latter work via finder and smbutil as expected, including access via AD users, connection and file transfer.
    If, instead, I use a windows client (I tried both Win7Pro and WinXP), while being able to ping the osx server machine, if I try to "explore" (entering \\hostname in explorer) the shares I get a "Network error: impossible to access ..." (approximate translation, sorry ). I tried both using the hostname and the ip address, always getting the same result.
    If I try via prompt with "net view \\hostname" I get a System Error 53 (Unable to find network path).
    Does anyone know if I am doing anything wrong?
    Thanks
    Christian

    I have done some further testing, and I can report that occasionally, I am able to connect from a windows 7 professional machine by issuing the following command:
    net use z:\\hostname\share /user:DOMAIN\username
    mostly this command returns a 53 system error, but sometimes I am asked for the user's password and am then able to access the shared folder for a brief time.

  • Windows clients unable to access File Sharing since upgrading to Mavericks Server

    This summer, I have been tasked to upgrade all the Macs on campus to Mavericks.  Including upgrading to Server 3.1.2.  Previously, we had an Xserve that ran 10.6.8 Server and two Mac mini servers that ran 10.8 Servers.  We have a new Mac mini to replace the Xserve and, initially, everything was pretty smooth.  I built the server from scratch, with the intention of using the 10.6.8 server as reference, only adapting to Profile Manager, instead of using Workgroup Manager. 
    The only problem I had when I started was that I couldn't get Active Directory to create home folders on my Mac Server "NetUsers" volume when adding a Home Folder path.  After playing around with it, I completely hosed the Server and decided to start over.  Now, after a clean install, I can't get any Windows users to connect to the share on the Mac Server.  It declares: "\\MacServer is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  Account restrictions are preventing this user from signing in.  For example: blank passwords aren't allowed, sign-in times are limited, or a policy restriction has been enforced."  What's more (that I may not have noticed two weeks ago or it just started, I don't know), the 10.8 server that I upgraded to 10.9 also is not accessible and gives the same error.  However, I can access all these file shares from Macs using either smb or afp.
    I'm suspicious that this issue is related to SMB1 vs. SMB2 that was implemented differently in Mavericks.
    Please, any help on this would be a life-saver.  School starts too soon and I need this running on day one!!!

    Had the same issue and spent 4 solid days tracking it down (looking in all the wrong places.)
    For us, it turned out to be a problem in DHCP services configuration.
    For the subnet under the WINS tab, the NetBIOS Scope had a '1' inserted into the field. Apple's tag when hovering the mouse over the field indicated a domain be insterted.
    This prevented the Windows XP machines from successfully registering with SAMBA. Once the field was blanked out and saved, the (one machine) needing to be joined found the PDC and successfully bound to the directory.
    Blank out the NetBIOS Scope field in DHCP (assuming a simple LAN environment) and you may be in good shape.

  • Windows Users Unable to Access SL Server

    I am attempting to have Windows clients access the SL server as AD users. I have AD/OD configured in a Magic Triangle with 10.5 and 10.6 clients being managed properly and accessing everything normally. smb services are enabled, all users and groups appear to have access according to Server Admin but I cannot login to the SL server as an AD user from a W2K machine. I'm probably missing something obvious, so I apologize for any ignorance on my part. Any ideas on how to gain access under Windows are welcome.

    Hi
    As per the information and details provided by you, to access OWA in Exchange 2007, please follow these steps: -
    Open
    Active Directory users and computers.
    Click on the
    View, and then click Advanced Features.
    Note:
    To make the
    Security tab available at both the user level and the organizational unit level, You must enable the Advanced features option in Active directory Users & Computers.
    This option will be available in the
    View tab.
    Open the properties for both the user level and the organizational unit level that the users are located in, and then locate the
    Security tab.
    Click on the
    Advanced.
    Make sure that the following check box is selected:
    Allow inheritable permissions from the parent to propagate to this object and all child objects. Include these
    with entries explicitly defined here.
    Force Active Directory replication.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G

  • Windows 10 unable to access CIFS

    I am unable to connect a windows 10 enterprise client to our cifs shares We use DFS on our windows server – so normally I would just map to the root of that \\domain\home I have tried adding the reg key as detailed here and elsewhere without success https://techjourney.net/cannot-connect-to-cifs-smb-samba-network-shares-shared-folders-in-windows-10/ Typically I normally disable SMB signing on windows 8/server 2012 clients but SMB signing negotiation seems to be optional now, and the reg key I would create gets rejected by windows 10 I do not want to start making wide ranging changes to my netapp, but if it improves security I am happy to do so The client is domain joined, and I have an account which is both local admin and domain admin running on it for testing Any advice greatly received – this is a tad inconvenient

    Hi, After some more personal digging around (my support ticket was getting nowhere fast) I have managed to successfully browse CIFS shares on my snapmirror filer at our DC.To do this I had to enable cifs signing and bounce the cifs service. FILER> cifs terminateCIFS local server is shutting down...CIFS local server has shut down...
    FILER> options cifs.signing.enable on
    FILER> cifs restart
    CIFS local server is running.
    Can't set cifs branchcache server secret. This filer is running 8.1.4P1 7-Mode This weekend we have a full power shutdown at our production site so I will try this on power up. It's so hard to get the users to close down their connections!!!! One thing I did notice though. The filer does not show the W10 client using security signatures - output from cifs sessions -t Using domain authentication. Domain type is Windows 2000.
    Root volume language is not set. Use vol lang.
    Number of WINS servers: 0
    Total CIFS sessions: 1
    CIFS open shares: 1
    CIFS open files: 0
    CIFS locks: 3
    CIFS credentials: 1
    IPv4 CIFS sessions: 1
    IPv6 CIFS sessions: 0
    Cumulative IPv4 CIFS sessions: 26383
    Cumulative IPv6 CIFS sessions: 0
    CIFS sessions using security signatures: 0 Will post results from production environment after the weekend

  • Touchsmart Iq506t Windows 7, Unable to acess s-video input from windows media center.

    System: Hp Touchsmart IQ506T
                  Windows 7
                  Avermedia (A327) Hybrid mini Pcie Tv Tuner (NTSC/ATSC)
    I purchase this system used without an operating system. I installed windows 7 and downloaded the drivers from Hp. All drivers are installed properly and the Avermedia (A327) mini card driver can be seen in device manager.
    Yet, the A327 tv tuner will not give me access to the s-video input. I can get tv thru the rf connection but I want to use the s-video because it has a cleaner signal.
    Any information about the s-video port will be appreciated..
    Thank you..

    Hi Cnmarsh,
    I understand you are having an issue with the Touchsmart Iq506t with  Windows 7, unable to access s-video input from Windows Media Center.
    I read from your post that drivers are installed properly and the Aver media mini card drivers are seen in device manager.
    I was wondering if the any of the drivers in Device Manager have a Yellow caution?
    Also, is the Touchsmart Iq506t software all up to date?
    You could try to download and run HP PC Hardware Diagnostics tool with this link.
    http://www8.hp.com/us/en/campaigns/hpsupportassistant/pc-diags.html?jumpid=va_r602_us/en/any/pps/pl_...
    Looking forward to hearing from you.
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Using CUPC7/CUPC8.6 and Jabber for windows...unable to access voicemail.

    Using CUPC7/CUPC8.6 and Jabber for windows...unable to access voicemail.
    Setup includes CUCM9.0, Unity Connection 9.0, Presence 9.0....
    steps taken to configure(and results acheived)
    1-users created locally on CUCM and Enabled for IM and Presence.
    2-able to login to clients (CUPS7/8.6 and Jabber) but getting error Voicemail Error. The server has rejected the provided credentials. [1903]
    in order to verify there is nothing wrong with the credentials...i checked on unity and i am sure it's the PIN(12345) i need to use .
    Can Anyone help me out here...Thanks in advance.

    It's not looking for your PIN - that is only used over DTMF-based interactions - it's looking for your CUC password. If the mailbox is synced from LDAP and you have LDAP Auth enabled on CUC, then this would be your AD password. If it's synced over AXL, not synced at all, or LDAP synced but without Auth, then there will be an alphanumeric password field on the mailbox under Edit > Change Passwords.
    Please remember to rate helpful responses and identify helpful or correct answers.

  • Lenovo G50-30 Unable to access BIOS settings after Windows recovery

    Hi
    I recently 'downgraded' a recently purchased Lenovo G50-30 with preinstalled Windows 8.1 to Windows 7 using a UEFI USB install on a GPT partition. I also updated the BIOS from A7CN40WW to the latest A7CN43WW and all was working fine. However, after performing a necessary restore of an system image created using the Windows 7 backup and restore tool, I am suddenly unable to access the BIOS settings, either with the novo button (I do get the menu to select BIOS) or with Fn +F2. All that happens is that I receive a blank screen with a static cursor in the upper left corner. I can however still access the boot menu Fn +F12. This is a particular pain as I obviousl can't select USB 3.0 in BIOS.
    Any help here would be greatly appreciated.

    OK, I managed to clear CMOS by disassembling and desoldering a leg off the the RTC battery but to no avail. The problem seems to be that BIOS a7cn43ww itself has somehow been corupted. In theory this should be able to be resolved by a reflash. The trouble here is there seems to be no way to reflash with a current or previous BIOS version, so I'll have to either wait for a newer version or someone may know better.
    C'mon Lenovo support this simply isn't good enough. It's a brand new laptop and I'm considering returning it for a refund.

  • Unable to access a windows 7 Workstation via RDP

    Hi,
    I have a windows 7 Pro SP1 workstation that I’m unable to access from any other machine via RDP...
    This is a domain environment.
    The machine in question is 100% up to date. (WSUS)
    It's running an up-to-date anti-virus solution and has been scanned. (Panda cloud) (No firewall)
    This is on a local network, no router involved.
    Can ping the machine, can see network shares.
    Checked that it's listening on the correct port.
    Necessary services are running and are starting correctly.
    Configured RDP correctly and tried different configurations (with and without NLA and adding/removing users)
    This machine seems to be able to RDP into other machines, it just wont accept any sessions.
    Assigning the necessary exclusions in firewall - no effect
    Firewall is disabled by GPO and I have stopped the service - no effect.
    Deleted the computer certificate - no effect.
    uninstalled the RDP 8 update - no effect
    Tried using both the IP and hostname - no difference
    I'm completely out of ideas, no other machine I tested with is having this issue and all the domain machines are running same AV and same GPO's are applied.
    Re-installation is not an option.
    Below is the error - very unhelpful.
    Kind Regards,
    Stephen

    Hi Hinte,
    Here are the results:
    Here is the netstat result - can't see 3389 anywhere:
    Active Connections
      Proto  Local Address          Foreign Address        State           PID
      TCP    0.0.0.0:135            0.0.0.0:0              LISTENING       1060
      RpcSs
     [svchost.exe]
      TCP    0.0.0.0:445            0.0.0.0:0              LISTENING       4
     Can not obtain ownership information
      TCP    0.0.0.0:623            0.0.0.0:0              LISTENING       4124
     [LMS.exe]
      TCP    0.0.0.0:16992          0.0.0.0:0              LISTENING       4124
     [LMS.exe]
      TCP    0.0.0.0:18226          0.0.0.0:0              LISTENING       2476
     [WAHost.exe]
      TCP    0.0.0.0:49152          0.0.0.0:0              LISTENING       532
     [wininit.exe]
      TCP    0.0.0.0:49153          0.0.0.0:0              LISTENING       1140
      eventlog
     [svchost.exe]
      TCP    0.0.0.0:49154          0.0.0.0:0              LISTENING       1292
      Schedule
     [svchost.exe]
      TCP    0.0.0.0:49185          0.0.0.0:0              LISTENING       624
     [lsass.exe]
      TCP    0.0.0.0:49187          0.0.0.0:0              LISTENING       600
     [services.exe]
      TCP    0.0.0.0:49192          0.0.0.0:0              LISTENING       3268
      PolicyAgent
     [svchost.exe]
      TCP    127.0.0.1:5939         0.0.0.0:0              LISTENING       2360
     [TeamViewer_Service.exe]
      TCP    127.0.0.1:5939         127.0.0.1:49206        ESTABLISHED     2360
     [TeamViewer_Service.exe]
      TCP    127.0.0.1:5939         127.0.0.1:49234        ESTABLISHED     2360
     [TeamViewer_Service.exe]
      TCP    127.0.0.1:49204        127.0.0.1:49205        ESTABLISHED     3856
     [TeamViewer_Desktop.exe]
      TCP    127.0.0.1:49205        127.0.0.1:49204        ESTABLISHED     3856
     [TeamViewer_Desktop.exe]
      TCP    127.0.0.1:49206        127.0.0.1:5939         ESTABLISHED     3856
     [TeamViewer_Desktop.exe]
      TCP    127.0.0.1:49232        127.0.0.1:49233        ESTABLISHED     2660
     [TeamViewer.exe]
      TCP    127.0.0.1:49233        127.0.0.1:49232        ESTABLISHED     2660
     [TeamViewer.exe]
      TCP    127.0.0.1:49234        127.0.0.1:5939         ESTABLISHED     2660
     [TeamViewer.exe]
      TCP    127.0.0.1:49241        0.0.0.0:0              LISTENING       4552
     [UNS.exe]
      TCP    192.168.100.22:139     0.0.0.0:0              LISTENING       4
     Can not obtain ownership information
      TCP    192.168.100.22:49201   92.51.156.72:443       ESTABLISHED     2360
     [TeamViewer_Service.exe]
      TCP    192.168.100.22:49203   197.85.190.46:443      ESTABLISHED     2360
     [TeamViewer_Service.exe]
      TCP    192.168.100.22:49211   192.168.100.5:445      ESTABLISHED     4
     Can not obtain ownership information
      TCP    192.168.100.22:49231   192.168.100.5:49159    ESTABLISHED     1732
     [spoolsv.exe]
      TCP    [::]:135               [::]:0                 LISTENING      
    1060
      RpcSs
     [svchost.exe]
      TCP    [::]:445               [::]:0                 LISTENING      
    4
     Can not obtain ownership information
      TCP    [::]:623               [::]:0                 LISTENING      
    4124
     [LMS.exe]
      TCP    [::]:16992             [::]:0                 LISTENING      
    4124
     [LMS.exe]
      TCP    [::]:49152             [::]:0                 LISTENING      
    532
     [wininit.exe]
      TCP    [::]:49153             [::]:0                 LISTENING      
    1140
      eventlog
     [svchost.exe]
      TCP    [::]:49154             [::]:0                 LISTENING      
    1292
      Schedule
     [svchost.exe]
      TCP    [::]:49185             [::]:0                 LISTENING      
    624
     [lsass.exe]
      TCP    [::]:49187             [::]:0                 LISTENING      
    600
     [services.exe]
      TCP    [::]:49192             [::]:0                 LISTENING      
    3268
      PolicyAgent
     [svchost.exe]
      TCP    [::1]:49179            [::]:0                 LISTENING       2008
     [jhi_service.exe]
      TCP    [::1]:49237            [::1]:49239            ESTABLISHED     4124
     [LMS.exe]
      TCP    [::1]:49239            [::1]:49237            ESTABLISHED     4124
     [LMS.exe]
      UDP    0.0.0.0:123            *:*                                   
    1256
      W32Time
     [svchost.exe]
      UDP    0.0.0.0:500            *:*                                   
    1292
      IKEEXT
     [svchost.exe]
      UDP    0.0.0.0:4500           *:*                                   
    1292
      IKEEXT
     [svchost.exe]
      UDP    0.0.0.0:5355           *:*                                   
    1540
      Dnscache
     [svchost.exe]
      UDP    0.0.0.0:21226          *:*                                   
    2476
     [WAHost.exe]
      UDP    127.0.0.1:50083        *:*                                   
    1400
      gpsvc
     [svchost.exe]
      UDP    127.0.0.1:55096        *:*                                   
    624
     [lsass.exe]
      UDP    127.0.0.1:60632        *:*                                   
    1540
      NlaSvc
     [svchost.exe]
      UDP    127.0.0.1:64416        *:*                                   
    4416
     [IntelSmallBusinessAdvantage.exe]
      UDP    192.168.100.22:137     *:*                                   
    4
     Can not obtain ownership information
      UDP    192.168.100.22:138     *:*                                   
    4
     Can not obtain ownership information
      UDP    [::]:123               *:*                                   
    1256
      W32Time
     [svchost.exe]
      UDP    [::]:500               *:*                                   
    1292
      IKEEXT
     [svchost.exe]
      UDP    [::]:4500              *:*                                   
    1292
      IKEEXT
     [svchost.exe]
      UDP    [::]:5355              *:*                                   
    1540
      Dnscache
     [svchost.exe]
      UDP    [fe80::3447:c85a:1d2d:4ff9%11]:546  *:*                                   
    1140
      Dhcp
     [svchost.exe]

  • I am unable to upload the latest version of iTunes.  It worked before and when prompted uploaded the newest version.  Now I'm unable to access iTunes..."Error 7 Windows Error126.  Insufficient privileges".  What do I do?

    I am unable to upload the latest version of iTunes.  It worked before and when prompted uploaded the newest version.  Now I'm unable to access iTunes..."Error 7 Windows Error126.  Insufficient privileges".  What do I do?

    Hey thomashfrompa,
    Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
    Symptoms may include:
    "The program can't start because MSVCR80.dll is missing from your computer"
    "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
    "Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
    "Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
    Resolution
    Follow these steps to resolve the issue:
    Check for .dll files
    1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    3. Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    1. Uninstall iTunes and all of its related components.
    2. Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    3. Re-download and reinstall iTunes 11.1.4.
    Thanks,
    Matt M.

  • I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the

    I am unable to access my LR5.7 Catalog of my recent holiday. I am running Windows 7 (64Bit) and recently installed and then uninstalled DxO Optics Pro. The error message says it "cannot be opened because another application already has it opened.Quit the other copy of Lightroom before trying to launch"  The problem is, that I can only see one copy of LR5 open and cannot locate the ".lrcat.lock" file for the specific catalog I want to open. I have tried re-booting my computer, but this did not work.

    Thanks Geoff. I was finally able to locate the ".lrcat.lock" file relevant to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. THANK YOU

  • All of a sudden I am unable to access my college email from any of my apple devices (iPhone, iPad, macbook pro). I am able to access from my husband's HP windows laptop and from a Mac computer at the college.

    All of a sudden I am unable to access my college email from any of my apple devices (iPhone, iPad, Macbook Pro). I am able to get access from my husband's HP windows laptop and from a Mac at the college. Any ideas?

    http://support.apple.com/kb/HT5621
    In short, you have a problem we can't solve.
    I suggest you contact Apple support and make an appointment to get help.  Expect to pay for it.

  • I m unable to access apple os after windows 7 instalation and its not giving the boot option

    i m unable to access apple os after windows 7 instalation and its not giving the boot option. plz any one help me out ..  how to fix it or how to delete windows 7 on my macbook

    Reboot, as soon as you hear the chime press and hold the option key, when the Boot Manager appears select OSX.

  • Unable to access orange email since upgrading to Windows 10

    Unable to access my Orange email account since upgrading to Windows 10 and Microsoft Edge. any suggestions?

    Not caught up with Win 10 yet. Doesn't Edge do POP3?
    You will need to install a POP3 mail client like Windows Live Mail or Mozilla Thunderbird

  • Unable to access applications in workspace,shared services

    Hi ,
    I am Unable to access applications in workspace and shared services on EPM 11.1.1.3. It happened after normal shutdown/startup scripts were run.
    But when I reconfigure the Weblogic web server and run the services again I can access the applications.This is happening frequently now.
    Is this anything related to user profiles on the server as we are migrating these to other server.
    Can any one help me with this .
    Please find the Shared services log below:
    <22-Oct-2010 10:25:19 o'clock BST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
    D:\bea\weblogic92\platform\lib\p13n\p13n-schemas.jar;D:\bea\weblogic92\platform\lib\p13n\p13n_common.jar;D:\bea\weblogic92\platform\lib\p13n\p13n_system.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_common.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_schemas.jar;D:\bea\weblogic92\platform\lib\wlp\netuix_system.jar;D:\bea\weblogic92\platform\lib\wlp\wsrp-common.jar>
    <22-Oct-2010 10:25:21 o'clock BST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with BEA JRockit(R) Version R27.4.0-90_CR358515-94243-1.5.0_12-20080118-1154-windows-ia32 from BEA Systems, Inc.>
    <22-Oct-2010 10:25:25 o'clock BST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 MP3 Mon Mar 10 08:28:41 EDT 2008 1096261 >
    <22-Oct-2010 10:25:29 o'clock BST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
    <22-Oct-2010 10:25:29 o'clock BST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
    <22-Oct-2010 10:25:29 o'clock BST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : D:\bea\license.bea>
    <22-Oct-2010 10:25:29 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <22-Oct-2010 10:25:29 o'clock BST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <22-Oct-2010 10:25:30 o'clock BST> <Notice> <Log Management> <BEA-170019> <The server log file D:\Hyperion\deployments\WebLogic9\servers\SharedServices9\logs\SharedServices9.log is opened. All server side log events will be written to this file.>
    <22-Oct-2010 10:25:47 o'clock BST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <22-Oct-2010 10:25:57 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <22-Oct-2010 10:25:57 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    log dir isD:\Hyperion\logs\SharedServices9
    urlManifest zip:D:/Hyperion/deployments/temp/servers/SharedServices9/tmp/_WL_user/interop/tthmcu/war/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
    Shared Services Version: 11.1.1.3.24
    Shared Services Drop Number: 6
    Attempting to verify the database configuration
    Attempting to verify the database configuration
    Database configuration test passed.
    22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Auto-Initializing Domain
    22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Configuration found in classpath
    22 Oct 2010 10:26:38 - org.apache.slide.common.Domain - INFO - Domain configuration : {org.apache.slide.lock=true, org.apache.slide.versioncontrol=true, org.apache.slide.debug=false, org.apache.slide.search=true, org.apache.slide.security=true, org.apache.slide.urlEncoding=UTF-8, org.apache.slide.domain=D:/Hyperion/deployments/WebLogic9/SharedServices9/config/Domain.xml}
    configURL: file:///D:/Hyperion/deployments/WebLogic9/SharedServices9/config/CSS.xml
    Done initialize: com.hyperion.css.CSSAPIImpl@283baf
    connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@27efaa
    connection pool registered:dbcpPool-org.apache.commons.pool.impl.GenericObjectPool@454a3b
    CMSOfflineServlet Initialized
    Adding audit listener
    Shared Services Initialized Successfully
    <22-Oct-2010 10:26:56 o'clock BST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    <22-Oct-2010 10:26:56 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <22-Oct-2010 10:26:56 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
    <22-Oct-2010 10:26:57 o'clock BST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias hyperion from the jks keystore file D:\hyperion_SSL_Repository\hyperion.jks.>
    <22-Oct-2010 10:26:58 o'clock BST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file D:\bea\JROCKI~1\jre\lib\security\cacerts.>
    <22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.86.57.43:28443 for protocols iiops, t3s, ldaps, https.>
    <22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.87.248.108:28443 for protocols iiops, t3s, ldaps, https.>
    <22-Oct-2010 10:26:58 o'clock BST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 127.0.0.1:28443 for protocols iiops, t3s, ldaps, https.>
    <22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "127.0.0.1", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
    <22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "LGWHYPWEB.uk.baa.com", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
    <22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "SharedServices9" for domain "WebLogic9" running in Production Mode>
    <22-Oct-2010 10:26:58 o'clock BST> <Warning> <Server> <BEA-002611> <Hostname "LGWWEB026.uk.baa.com", maps to multiple IP addresses: 10.86.57.43, 10.87.248.108, 127.0.0.1>
    <22-Oct-2010 10:26:58 o'clock BST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
    <22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
    <22-Oct-2010 10:26:58 o'clock BST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
    <22-Oct-2010 10:27:08 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
    <22-Oct-2010 10:28:36 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwdbs026.uk.baa.com - 10.86.41.33 instead of an SSL handshake.>
    22-Oct-2010 10:28:38, /files, HEAD, 401 "Unauthorized", 125 ms, %v
    22-Oct-2010 10:28:38, /files, HEAD, 200 "OK", 266 ms, %v
    22-Oct-2010 10:28:40, /files, HEAD, 401 "Unauthorized", 16 ms, %v
    22-Oct-2010 10:28:41, /files, HEAD, 200 "OK", 94 ms, %v
    22-Oct-2010 10:28:42, /files, HEAD, 401 "Unauthorized", 0 ms, %v
    22-Oct-2010 10:28:42, /files, HEAD, 200 "OK", 93 ms, %v
    22-Oct-2010 10:28:43, /files, HEAD, 401 "Unauthorized", 0 ms, %v
    22-Oct-2010 10:28:43, /files, HEAD, 200 "OK", 94 ms, %v
    22-Oct-2010 10:28:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
    22-Oct-2010 10:28:44, /files, HEAD, 200 "OK", 78 ms, %v
    22-Oct-2010 10:28:45, /files, HEAD, 401 "Unauthorized", 0 ms, %v
    22-Oct-2010 10:28:45, /files, HEAD, 200 "OK", 93 ms, %v
    22-Oct-2010 10:28:47, /files, HEAD, 401 "Unauthorized", 0 ms, %v
    22-Oct-2010 10:28:47, /files, HEAD, 200 "OK", 78 ms, %v
    22-Oct-2010 10:28:48, /files, HEAD, 401 "Unauthorized", 0 ms, %v
    22-Oct-2010 10:28:48, /files, HEAD, 200 "OK", 78 ms, %v
    <22-Oct-2010 10:29:40 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwapp026.uk.baa.com - 10.86.51.104 instead of an SSL handshake.>
    <22-Oct-2010 10:30:16 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer lgwapp026.uk.baa.com - 10.86.51.104 instead of an SSL handshake.>
    <22-Oct-2010 10:32:25 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
    22-Oct-2010 10:32:43, /files, HEAD, 401 "Unauthorized", 0 ms, %v
    22-Oct-2010 10:32:43, /files, HEAD, 200 "OK", 78 ms, %v
    22-Oct-2010 10:32:44, /files, HEAD, 401 "Unauthorized", 0 ms, %v
    22-Oct-2010 10:32:44, /files, HEAD, 200 "OK", 63 ms, %v
    22-Oct-2010 10:32:45, /files, HEAD, 401 "Unauthorized", 0 ms, %v
    22-Oct-2010 10:32:45, /files, HEAD, 200 "OK", 63 ms, %v
    <22-Oct-2010 10:32:46 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
    <22-Oct-2010 10:34:00 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
    <22-Oct-2010 10:35:28 o'clock BST> <Warning> <Security> <BEA-090475> <Plaintext data for protocol HTTP was received from peer LGWHYPWEB.uk.baa.com - 10.86.57.43 instead of an SSL handshake.>
    log dir isD:\Hyperion\logs\SharedServices9
    urlManifest zip:D:/Hyperion/deployments/temp/servers/SharedServices9/tmp/_WL_user/interop/tthmcu/war/WEB-INF/lib/interop-mmc.jar!/META-INF/MANIFEST.MF
    Shared Services Version: 11.1.1.3.24
    Shared Services Drop Number: 6
    Populating Application Info
    Getting LCM callback info from Registry for product: HUB
    LCM Callback: https://LGWWEB026.uk.baa.com:28443/interop/framework/lcm/HSSMigration
    Populating Product Info
    Thanks in advance
    Edited by: 790426 on 25-Oct-2010 06:17

    You must first check if you have configured the web server to include the hfm/planning products.
    Then you can refer to the thread below:
    Not able to see Consolidation Administration
    The latter definitely applies to version 9.3.1, but it could be helpful.

Maybe you are looking for