Windows 7 unable to connect to mobile hotspot after last patch

Hi,
I recently re-installed the Windows 7 on my laptop. I applied a lot of patches.
I have two phones: one blackberry curve and an android Samsung Galaxy Nexus.
Since yesterday I was able to start the tethering on the smartphone and activate the mobile hotspot. Windows 7 was able to connect to the mobile hotspot without any problem.
Yesterday evening I applied the last patches and this morning I restarted the PC to applied them.
Now Windows is not more able to connect to any mobile hotspot. However, is still able to connect to a standard Cisco WiFi network.
Does anybody have any idea why?
Thanks

Since issue only occurred after you installed the last patches, in addition to the wifi driver, I also suggest you uninstall the latest patches for a test, seems something conflits with them, what is the result?
Regards
Yolanda
TechNet Community Support

Similar Messages

I am unable to connect my mobile hotspot as wifi for ipad - Always dismiss

I am unable to connect my blackberry mobile hotspot as wifi for ipad but during connecting message comes as dismiss

What router are you using? make/model/version
What security type are you using? If it is WEP then symbolic (non hex) keys may be converted to hex in different ways by different operating systems. Is your laptop a Windows PC?
If you are using WEP then drop it and move to WPA2. WEP has been deprecated by the WiFi alliance since 2004 as insecure (it can be hacked in seconds).

Unable to connect to mobile hotspot

iPad will not join Verizon mobile hotspot.

Since issue only occurred after you installed the last patches, in addition to the wifi driver, I also suggest you uninstall the latest patches for a test, seems something conflits with them, what is the result?
Regards
Yolanda
TechNet Community Support

Unable to connect to Apple TV after install Mavericks

Hello I'm unable to connect to Apple TV after install Mavericks. :-(
The icon of the Apple TV no longer appers on the top menu and my Mac is unable to discover it...
The Apple TV Box is upedated to the most recent software version.
Apple TV is connected to the same Wifi network of my Mac
I have a:
Mac Book Pro 13-inch, Early 2011
Processor 2,3 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 384 MB
Serial Number <edited by host>
Software OS X 10.9.2 (13C64)
Can anyone help me ????

Hello M.A.S.Ramos,
Thank you for using Apple Support Communities.
For more information, take a look at:
OS X Mavericks: Wirelessly mirror your Mac screen to your HDTV
http://support.apple.com/kb/PH14375
Make sure your Mac and your Apple TV are on the same network.
Choose your Apple TV from the AirPlay status icon in the menu bar.
Choose This Mac or your Apple TV depending on how you want to match the desktop size of your Mac.
OS X automatically detects an Apple TV when it’s on the same network, and displays the AirPlay icon in the menu bar. When AirPlay Mirroring is active, the status icon is blue.
Have a nice day,
Mario

Unable to connect Wi-Fi network after ISO 6 update

unable to connect Wi-Fi network after ISO 6 update. I'm not impressed.

I updated to ISO 6 on my Daughters Iphone 4S, my Iphone 4, and I have now received my new Iphone 5 yesterday and now all 3 of them have wi-fi issues. I know its not my wi-fi because My Daughters Ipad 2 and my Wife's Iphone 4 is still on 5.11 and the wi-fi works fine. I cant understand why apple have not been saying what's going on and when they will fix it. I have tried everyone's suggestions on this forum and the Internet. Still no luck.

Unknown Error (-53) after last "Patch Tuesday"

I'm unable to sync my iPod Touch since the day after last "Patch Tuesday". I get an alert referencing an "unknown error (-53)" every time I try to sync. I've tried the usual windows steps; uninstall and reinstall, reboot multiple times, disable all anti-virus, anti-spam, firewall, curse, pray, etc. I've done a search here and Googled but haven't seen any discussions.
Is anybody else having this problem or is it just another windows anomaly requiring a format and clean install?

thokra wrote:
Experience the same problem after installing the latest update and cant do anything now.
Have someone with a PC running Windows XP download the shuffle Reset Utility and apply it to your shuffle.

Unable to connect to Planning URL after new instal & configuration 11.1.2

I have installed 11.1.2 on Windows 64 bit environment and configured.
Here is my environment:
Box 1. FS, Essbase, Weblogic, Oracle HTTP. Configured successfully and working great no issues (I have not configured web server in FS yet)
Box 2. Planning. Installation and configuration was successful.
Issue: however unable to connect to URL http://servername:8300/hyperionplanning/logon.jsp and http://servername:19000/hyperionplanning/logon.jsp (I am not expecting 19000 will connect)
Trobleshooting:
Upon running netstat, 8300 is not running on this box.
Also configured "Manage Planning Cluster" with no luck.
Weblogic (11g) server indicated planning state is unknown.
Diagnostic indicates: 1. system-jazn-data.xml file does not exist 2. web app for planning failed due to Error: java.net.ConnectException: Connection refused: connect
I have stopped and restarted Planning app service several time runs without any issue but unable to connect to URL and no port is running.
Planning log does not reveal any error messages.
EPM system log indicates ServletContainerAdapter manager not initialized correctly
There is no error in start-HyS9Planning-out.log.
start-HyS9Planning-error.log indicates The requested service has already been started.
There is an error in validation log:
[2010-10-06T10:18:23.171-04:00] [EPMVLD] [ERROR] [EPMVLD-02017] [oracle.EPMVLD] [tid: 25] [ecid: 0000Ii1u3V8EcLPMyeU^MG1Cf8KW00000E,0] [SRC_CLASS: com.hyperion.cis.validation.checkers.impl.AppServerChecker] Error checking response code: [[
java.lang.Exception: java.net.ConnectException: Connection refused: connect
     at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:153)
     at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:66)
     at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplication(AppServerChecker.java:159)
     at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplications(AppServerChecker.java:119)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
     at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:243)
     at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:119)
     at org.mozilla.javascript.gen.c14._c0(./scripts/webappcheck.js:2)
     at org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
     at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:401)
     at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:3003)
     at org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
     at org.mozilla.javascript.gen.c14.exec(./scripts/webappcheck.js)
     at org.mozilla.javascript.Context.evaluateReader(Context.java:1119)
     at com.hyperion.cis.validation.RunningEnviroment.processSource(RunningEnviroment.java:222)
     at com.hyperion.cis.validation.RunningEnviroment.runScript(RunningEnviroment.java:279)
     at com.hyperion.cis.validation.RunningEnviroment.access$000(RunningEnviroment.java:40)
     at com.hyperion.cis.validation.RunningEnviroment$1.run(RunningEnviroment.java:132)
Caused by: java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:519)
     at sun.net.NetworkClient.doConnect(NetworkClient.java:158)
     at sun.net.www.http.HttpClient.openServer(HttpClient.java:394)
     at sun.net.www.http.HttpClient.openServer(HttpClient.java:529)
     at sun.net.www.http.HttpClient.<init>(HttpClient.java:233)
     at sun.net.www.http.HttpClient.New(HttpClient.java:306)
     at sun.net.www.http.HttpClient.New(HttpClient.java:323)
     at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:852)
     at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:793)
     at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:718)
     at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:111)
     ... 21 more
What am I not doing?
Thanks for your help in advance!
Edited by: VenuRamini on Oct 6, 2010 7:25 AM
Edited by: VenuRamini on Oct 6, 2010 7:35 AM

John, thanks for quick response!
I have restarted Planning and looked at the log file.
HyS9Planning-sysout.log indicated
<Oct 6, 2010 11:58:59 AM EDT> <Critical> <Security> <BEA-090518> <Could not decrypt the username attribute value of {AES}xxxxxxxxxxxxxxx= from the file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning1\security\boot.properties. If you have copied an encrypted attribute from boot.properties from another domain into E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\Planning1\security\boot.properties, change the encrypted attribute to its cleartext value then reboot the server. The attribute will be re-encrypted. Otherwise, change all encrypted attributes to their cleartext values, then reboot the server. All encryptable attributes will be re-encrypted. The decryption failed with the exception weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte..>
Prior to this after reading epm_1112000_readme.pdf file on page 9 (issue 9180347, 8841004) there is known issue of not copying the file to destination location. Followed instruction and that did indicate that userid and pwd was not encrypted.
Here is the log when I change boot.properities files base on known issue stated above:
<Oct 6, 2010 12:34:56 PM EDT> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Oct 6, 2010 12:34:56 PM EDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
     at weblogic.security.SecurityService.start(SecurityService.java:141)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User admin javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User admin denied
     at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
     at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
     at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     Truncated. see log file for complete stacktrace
>
<Oct 6, 2010 12:34:56 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Oct 6, 2010 12:34:56 PM EDT> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Oct 6, 2010 12:34:56 PM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
HyS9Planning-syserr.log has no info.
Edited by: VenuRamini on Oct 6, 2010 9:51 AM

Unable to connect to app store after upgrading to ios5.1??

Have tried everything restoring, resetting, formatting!!! Rest all network related apps like safari and fb are doing fine.Only the featured page is opening in app store.top 25 n search are not!! I can connect using mobile data connections but am unable to open anything through wifi... feel like kicking myself for upgrading to ios5.1.

Thx very much....but I could open the website and the itunes store....
After I tried typing following orders in Commonds, the problem solved:
rm ~/library/preferences/com.apple.appstore.plist
rm ~/library/preferences/com.apple.storeagent.plist
rm -rf ~/library/preferences/byhost/*
hope can hlep others

My browser's are 'unable to connect' to some websites after upgrading to mavericks.

the message i get is:
Unable to connect
Firefox can't establish a connection to the server at www.adobe.com.
    The site could be temporarily unavailable or too busy. Try again in a few moments.
    If you are unable to load any pages, check your computer's network connection.
    If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
this is happening on reliable sites such as www.adobe.com, however, there are other sites that also won't load such as (http://www.adobe.com/products/reader.html), and though it seems specific to adobe. i had a friend try going to the adobe site on a different machine running osx 10.6 and they could load the page fine. i tried firefox and safari and neither will load the page.
i'm running:
os x 10.9.2
processor- 3.06 GHz Intel Core 2 Duo
memory- 8 GB 1067 MHz DDR3
thanks,
rick

You, or someone using your computer, may have hacked the system to redirect queries to certain servers. The file modified is /etc/hosts.
The easiest way to fix the hosts file is to restore it from a backup that predates the modification, or to copy the unmodified file from another Mac. If you can't do that, then do as below.
Back up all data.
If you have more than one user account, you must be logged in as an administrator.
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
Below that, you'll see some other lines. There should be nothing above the first line "##". If you have any doubt about that, STOP and ask for guidance. Make sure you scroll all the way to the bottom. Scroll bars are hidden by default until you actually start scrolling, so you may not realize that you’re not seeing the whole document.
If the contents of the TextEdit window are as described, close it, then enter the following command in the Terminal window in the same way as before (by copy and paste):
sudo sed -i~ '11,$d' /etc/hosts
This time, you'll be prompted for your login password, which won't be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning to be careful. Confirm. Quit Terminal.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
That will fix the hosts file. There is now a copy of the old hosts file with the name "hosts~" in the same folder as "hosts". You can delete the copy if you wish. Don't delete the file named "hosts".

Unable to connect Lightroom mobile 5.4

After upgrading my Lightroom version, I try to connect Lightroom mobile from my Mac, but unable to do it. I have a message "Lightroom a rencontré un problème de connexion inattendu. Veuillez réessayer ultérieurement (Attempt to index a nil value)."
Of course, I use the right login/password as I have an Adobe ID (I have a subscription to Adobe CC).
How can I do ?

Databases before 9iR2 are not supported. While some features may work, there are many that will not. The big ones that come to mind are pl/sql debugging and that date columns will not show their values. But those are in reference to 8i, so you may have even more issues.
Other tools.. There is always SQL*Plus :)
There is always toad and you may even still be able to find the free version from before quest got its hands on it which should work well with version 8. Other free tools are squirrel, qtodbc, and tora. Commercial tools are toad, pl/sql developer and a host of others.
Eric

Cannot connect to mobile hotspot using wpa; only open security works

I have a Galaxy S5 and am trying to connect to the mobile hotspot using my Surface tablet. If I have the mobile hotspot setup using WPA2 security with a password I cannot connect however I can connect if I am using Open security.
I can connect the surface to other routers using WPA security, just not the Samsung as a mobile hotspot.
does anyone have any suggestions?

What you have proved here is that your tablet has a password conflict somewhere. You should find out where your wireless profiles are being stored on that device, wipe them out and then try connecting again. Once you provide the tablet with all of the correct connection credentials and configurations it should connect just fine.
Connecting without a password proves there is not a WiFi issue. Connecting to other devices is additional proof that there is not a WiFi issue going on. You just need to straighten out the security issue and then will be good to go.

Unable to connect to wireless network after software update

on updating the software on my Ipad 3 I am unable to connect to my office wireless network

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I just updated to lastest OS, i get error msg unable to connect to server. After update, I couldnt complete the update process. How do i fix?

I couldnt complete the process after the update. The system wouldnt accept my 2nd email address. Now i am unable to restart that process. I get Unable to connect to server everytime i try to access my ICloud from my iphone

If you buy an iLife '11 install DVD (eBay, Amazon) you could upgrade your iPhoto right away. The earlier iPhoto '11 versions are compatible with MacOS X 10.6.8.
but I can't until I upgrade from OS X 10.6.8. Trying to figure out how to do that...
To upgrade to Mt. Lion see here: You can buy it and download it from the appStore, if your mac is compatible:
http://www.apple.com/osx/how-to-upgrade/

Still getting 'unable to connect to background process" after clean install

I just did an erase and install on my system, installed FCP and DVDSP/Compressor (FCP HD), tried to export a file, and am getting that error still.
It does seem odd though that it seemed to remember my settings, because it noted that my firewire drive was missing. Also, I got that Qmaster error (An item in the Startup Items folder ("/Library/Startup Items/Qmaster") does not have the proper security settings. The first time I got the error, I hit 'decide later: and tried to export. Had a problem. Then I hit 'fix' the next time the error came up, but it did not fix the problem as Compressor will not export.
Everything else seems new though, from scratch.
Compressor worked fine until recently.
What do I do now?

Well somehow I'm not getting that startup error anymore. I've tried a bunch of things and one of them was, I think, to choose 'fix' in the dialog box.
In answer to the above question, Compressor version is 1.21 (was 1.2 but I upgraded as suggested in the Apple article. Final Cut Pro HD 4.5 .
I'll say it again before everyone reminds me of the need to upgrade: yes I'm aware but cannot afford it at this time.
It appears that Compressor and my internet network connection do not play well together. So I've done a bunch of tests and the only thing that seems to work is the thing suggested in this article: http://www.kashum.com/rbf.pl?c=blog&i=1152611689&referer=r .
I went into system prefs>network and under location, created a new location. Under that new location, under the 'show' menu, I chose 'network port configurations' and unchecked all the ports, and hit apply now. This basically disabled all the network ports. I restarted the computer and the compressor export worked.
It's not a total fix, but at least it's something.
Testing a little further, it appears to be the built in ethernet that's causing the problem. I unchecked each port individually, restarting the computer after each one then trying to export a clip. When I start ithe system with the ethernet unchecked, then try to export through Compressor, it works. When I then check the ethernet port and turn it back on, with FCP still running, it continues to work. If, however, I restart the computer with the ethernet checked and turned on, the compressor unable to connect message comes back, and stays there until the computer is restarted with the network port disabled.
This would make sense because not long ago I got my Qwest DSL hooked up and that was probably around the time this problem started happening. For some reason I had no issue when I had my Comcast on. Oh well. So something's definitely funky in the settings.
I"m not a programmer so I did my best with the things the article suggested - some I could figure out, some not so much, but the only thing that seems to help is this network fix.
Not sure if someone posted this article earler or if I just ran across it in my own search - will have to go back and check - but if so, thanks. I need to go back and check the points things on those posts anyway.
I'm at a loss how to fix this any other way. I guess for now I"ll have to either turn the internet off and restart the system before exporting a project, or start the system with the ethernet off and go in and turn the port on manually each time - major pain. But if only I had done this before doing an erase and reinstall! I've been down for weeks going through files, backups to get ready picking at solutions, trying to figure out how to do these fixes. The good side of this is that 1) those files needed to be backed up anc cleaned out anyway, 2) It made me pay attention to the fact that I've been sloppy about my backup system, and 3) I now know how to erase and reinstall and it's not such a scary prospect. So if something happened in the future and it required that, I'm now more prepared to handle it and know that as long as things are backed up well, the computer's not going to smoke and blow up under those circumstances. =)
Does it seem odd to anyone that I would do an erase and reinstall, boot up FCP, and it would remember my settings and send up a reminder that my firewire drive is missing? It appears that every other thing in the system is new.
After all the main software is reinstalled, I'll mess with some system updates and QT updates to see how they affect things and update you guys on that.
If anyone can suggest a more complete fix, now that I"ve narrowed it down to a network compatibility issue, please let me know. Thanks
Message was edited by: Editgrrl123

[E2010] [EWS] [C#] [Windows]: Unable to connect to remote server

I have a Windows Service that uses EWS to connect to a mailbox and do some things with certain emails. The service has been running for a while now, with little to no issues. Just recently the service will stop and when viewing the event log, we receive
the following error.
Error Message: The request failed. Unable to connect to the remote server
Inner Exception: System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full
   at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.InternalBind(EndPoint localEP)
   at System.Net.Sockets.Socket.BeginConnectEx(EndPoint remoteEP, Boolean flowContext, AsyncCallback callback, Object state)
   at System.Net.Sockets.Socket.UnsafeBeginConnect(EndPoint remoteEP, AsyncCallback callback, Object state)
   at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
   --- End of inner exception stack trace ---
   at System.Net.HttpWebRequest.GetResponse()
   at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
   at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
Target Site: Microsoft.Exchange.WebServices.Data.IEwsHttpWebResponse GetEwsHttpWebResponse(Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest)
Source: Microsoft.Exchange.WebServices
Stack Trace:    at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
   at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
   at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute()
   at Microsoft.Exchange.WebServices.Data.ExchangeService.FindItems[TItem](IEnumerable`1 parentFolderIds, SearchFilter searchFilter, String queryString, ViewBase view, Grouping groupBy, ServiceErrorHandling errorHandlingMode)
   at Microsoft.Exchange.WebServices.Data.ExchangeService.FindItems(FolderId parentFolderId, SearchFilter searchFilter, ViewBase view)
   at MyClass.CleanupDeletedItems()
   at MyClass.ReadEmail()
   at MyService.WorkerFunction()
This so far has only occured twice, but I am not sure if the issue is on the exchange servers, or the server where the service itself is running. Any ideas on what would cause this issue and how to go about fixing it?
If you find that my post has answered your question, please mark it as the answer. If you find my post to be helpful in anyway, please click vote as helpful.
Don't Retire Technet

Hi Clayman
Well it makes sense to me that the registry could help, checking the lines in the error code, it appears that the for some reason the server could not stablish a connection, the error states: because the system lacked sufficient buffer space or because a queue
was full.
It seems don't make sence untill you have a look at Socket Class (MSDN article), which say: The Socket class provides a rich set of methods and properties for network communications. The Socket class allows you to perform both synchronous and asynchronous data
transfer using any of the communication protocols listed in the ProtocolType
Checking also the HttpWebRequest Class, we can see the it also relays on Socket Class, as it says by the end of your exception:
[at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)]
I also don't know if you could reboot your machine, but it would be good.
Also I really think its worthy a try, as not much information can befound on this EWS issue.
MaxUserPort
From <http://technet.microsoft.com/en-us/library/cc938196.aspx>
Socket Class
From <http://msdn.microsoft.com/en-us/library/system.net.sockets.socket(v=vs.110).aspx>
HttpWebRequest.GetResponse Method
From <http://msdn.microsoft.com/en-us/library/system.net.httpwebrequest.getresponse(v=vs.110).aspx>
HttpWebRequest Class
From <http://msdn.microsoft.com/en-us/library/system.net.httpwebrequest(v=vs.110).aspx>
If you apply the registry change, let me know.
Think before you ask, be detalist as much as possible, then ask and you will get help! Always have in mind, people do not guess! :)

Windows 7 unable to connect to mobile hotspot after last patch

Similar Messages

Maybe you are looking for