Windows 7 Update module

Hi ,
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-76910
i am having a warning while trying to install this update module for my system. warning says " this update is not applicable to your computer " .
there are about 10 update modules which i ve downloaded from lenovo site for my laptop and i was able to install them successfully.
but since i have installed Service Pack 1 for Win 7 i realised that i am getting that warning while trying to install the update modules.
do u think it is becuase of SP1 or sth other ? any idea ?
thank you.
my laptop is >
ThinkPad Edge 13 type 0196-2zg
windows 7 x64
Moderator Note: Edited subject to match content.
+ ThinkPad X201 3626-FBG / Intel Core i5 M520 2.4Ghz / DDR3 8Gb / Intel SSD 730 Series 240Gb / 12.1" WXGA 1280x800px / Dual boot Win7 Pro x64 - Ubuntu 14.04 LTS 64bit + X200 Ultrabase + ThinkVision L2250p

I didn't trash your message, it's in the forum housekeeping's board:- http://forums.lenovo.com/t5/Forum-Housekeeping/forum-doesnt-work-with-IE9/td-p/393449
I only split it and moved the empty post out of sight, sorry for the inconvenience.
P.S. You're welcome
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution! 
  Lenovo Deutsche Community     Lenovo Comunidad en Español 
Visit my YouTube Channel

Similar Messages

  • About all those Windows 7 Update Modules (for X120e)

    Hi All,
    My X120e built-in Lenovo update program recommends me to download many of those "Windows 7 Update Modules", what are they?  There are like 6 that it recommends (and 12 as listed as X120e compatible on this page: http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-76363, all with the same name but with different dates and numbers.  Should I download them all?  If yes then in what order?  Or simultanuously?
    Thanks.
    Moderator edit: Fixed link.
    Solved!
    Go to Solution.

    Run Windows Update first, then see if System Update still offers them.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • System Update Windows 7 Update Module KB2615763

    System Update (5.02.0007) schlägt mir zur Installation folgendes Update vor: Windows 7 Update Module KB2615763.
    Beim Versuch es zu installieren schlägt es fehl. Danach habe ich versuch es manuell zu installieren. Es erscheint das Fenster "Eigenständiges Windows Update Programm" und die Fehlermeldung "Das Update ist nicht für diesen Computer geeignet".
    Finde ich sehr unschön. Wenn es nicht geeignet ist, warum wird es dann angezeigt? Könnte dieses Update das Problem beheben mit meiner externen USB 3 Platte, die nur an USB 2 Ports funktioniert?
    Besten Dank für Eure Hilfe.
    Thinkpad T530 (239237G)
    Windows 8 x64
    Samsung SSD 840

    JamesAtlick schrieb:
    System Update (5.02.0007) schlägt mir zur Installation folgendes Update vor: Windows 7 Update Module KB2615763.
    Schaue erst einmal in Systemsteuerung - Programme und Funktionen nach, ob es nicht vielleicht schon installiert wurde.
    Zum Patch:
    Included QFE and the description are listed as below:
    QFE#
    Description of Software
    2615763
    "0x000000D1" Stop error when you connect a USB composite device to a computer that is running Windows 7 or Windows Server 2008.
     Quelle
    Siehe auch: http://support.microsoft.com/kb/2615763
    Unter den Link zu "Quelle" findest Du auch den Patch zum manuellen Download sowie die Installationsanleitung.
    My home-forum: http://www.thinkpad-forum.de
    Wiki: Deutsches ThinkPad-Wiki English ThinkWiki
    My ThinkPad-Collection

  • Windows Update does not work, Windows Standalone Update Installer stops with error 0xc8000247 (Windows 7 Home Premium on Acer Aspire 1810TZ notebook)

    I purchased a new notebook with Windows 7 in October. During the first weeks I uninstalled McAfee and replaced the harddrive. Since November Windows Update fails with error messages and defender does not start anymore. I made several virus scans (complete) with multiple antivirus programs but nothing showed up.
    Since it took my days to install various software, I do not want to re-install W7. I also have no good backup that I could restore. 
    I am really surprised that there is not even a single entry regarding the error code in the Microsoft Knowledge base or elsewhere.
    I really would appreciate help. 

    I hit this same problem... I spent days trying to figure out what went wrong. MS advise of doing; Windows7 re-installs, BIOS/firmware updates, drivers changed, etc etc etc.
    I installed a new(large) SEAGATE Momentus XT hybrid 750GB SATA drive upon newly purchased notebook, but the twist here is between the storage configuration mode in the BIOS, ATA vs. AHCI. See, the DELL BIOS required to configure my laptop storage for AHCI
    mode, because I had the 4GB Intel Flash Cache Module (Turbo Memory) installed on the DELL Precision notebook. The Flash Cache is installed internally in the mini-pcie slot, loaded the Intel storage drivers, and when it works, is an outstanding feature which
    supports:
    Windows ReadyDrive*
    Windows ReadyBoost*
     Looking at the details of the Intel storage drivers that support the INTEL TURBO MEMORY, they're from 2009. Of course it was recommended by users to install these drivers first before anything else, so it would function best, but this was part of the
    cause to all the problems with Windows 7.  I've provided links to Intel Flash Cache info for those interested. Unfortunately, loading the HP/Intel Storage drivers fixes the Windows permissions/update problems, but "Breaks" the Intel Turbo Flash Cache
    functionality now, even though Microsoft still supports ReadyDrive in Windows 7.
    "Intel® Turbo Memory is a primary PC component, along with the CPU, chipset, and system memory. It caches large amounts of frequently used data or user selected applications for faster access by the processor. This decreases the need for hard-disk accesses,
    saving both time and power, which equates to increased performance and energy efficiency. That's good news for users who run data-intensive software like media applications. It's also a good match to the substantial system requirements to load and run Windows
    Vista*.
    Intel Turbo Memory is a single solution that accelerates data transfer both to and from the processor."
    Intel discontinued support for the modules or drivers with the marketing move to producing their own SSD storage drives.
    WIKI: http://en.wikipedia.org/wiki/Intel_Turbo_Memory
    INTEL page: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396715.htm
    Intel Drivers/Support Turbo Memory: http://www.intel.com/cd/channel/reseller/apac/eng/products/mobile/mprod/turbo_memory/396719.htm
    For me, I hit all the symptoms everyone else hit and thanks to humphrey for his find. I just wish Microsoft/Intel would get together and fix this Windows 7 issue between SW/HW; Large Drive Sizes, Licensing/Permissions, Flash Memory, ATA vs. ACHI, BIOS, etc.
    There's been an incredible amount of loss productivity, resources, and costs incurred on this one ISSUE by everyone involved.
    Intel Member login for Mobility Turbo Memory Flash Cache pdf: http://www.intel.com/cd/channel/reseller/asmo-na/eng/products/mobile/mprod/turbo_memory/394947.htm

  • InDesign CS6 crashes at startup after windows 7 update

    InDesign crashes at startup after windows 7 update: Faulting module path: C:\Windows\system32\MSVCR100.dll (Microsoft Visual C runtime and update KB2538243 and KB2565063)
    Reinstalling did not help
    Also Adobe Encore CS6 seems to be affected

    I looked at the recovery files in:
    C:\Users\MyName\AppData\Local\Adobe\InDesign\Version 8.0\en_US\Caches\InDesign
    I deleted all the files and Indesign started up fine.  feeling good I closed Indesign and restarted.
    Indesign Crashed again.
    Deleted all files again and reloaded. 
    I went to "Edit:Preferences:File Handling:Document Recovery Data"  to:
    G:\Adobe\Indesign\Cache\Recovery
    Interestingly, the Indesign application recovery files still reside in the user directory above.   But the document recovery data moves to the G drive above.
    There is no clear reason why Indesign quit loading today.  It worked fine since initial installation last year.  But separating the document recovery data from the application recovery data seems to fix the problem for now.

  • Satellite P200-P100 - Black screen after a Windows 7 update

    Hi,
    I have a Toshiba Satellite P200-P100 running Windows 7.
    A few weeks ago, after a Windows 7 Update, my monitor would not show any image, it would light up, but still no image. Not even the BIOS it would load.
    I fixed it by using System Restore using another monitor. The same happened again today, I must have ran the same update, but this time a system restore did not solve it, neither did reinstalling Win 7.
    Any suggestions?
    Thanks,
    Spre3

    Hi
    You mean you cannot see anything on the internal nor the external monitor even switching the display output pressing the FN + F5 buttons???
    Hmm. in my personal opinion this has nothing to do with the Win 7 update
    I mean the Win 7 OS update/installation should not affect the BIOS and you should be able to access the BIOS even if no operating system would be installed on the HDD!!!
    So I assume the whole issue could be related to the motherboard issue or some parts placed on motherboard
    Did you try this?
    Remove the battery and disconnect the AC adaptor
    Then wait a little bit (1hour) and then connect both parts again.
    Then try to power up the unit
    If this will not help then the RAM modules should be checked.

  • Firefox will not open and crashes after my lastest Windows 7 update on April 21st, 2015

    After I completed the latest Windows 7 Update I have not been able to access Firefox. Upon opening the program I am given "Firefox has stopped working" message as the image shows. Never had any issues with Firefox before. I have Uninstalled and Reinstalled the latest Firefox version with the same results.
    Please guide me to fix this problem
    Adam

    You can check if you can start Firefox in <u>[[Safe Mode|Safe Mode]]</u> by holding down the Shift/Options key.
    *https://support.mozilla.org/kb/Safe+Mode
    If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
    *bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
    You can find the Report ID of recent crash reports on the "Help > Troubleshooting Information" page (about:support).
    *Click the "All Crash Reports" button on this page to open the <b>about:crashes</b> page and see all crash reports.
    If necessary then you can open <b>about:</b> pages via the location/address bar.
    See:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter
    *https://support.mozilla.org/kb/Mozilla+Crash+Reporter
    If you can't open Firefox, see:
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
    *https://developer.mozilla.org/How_to_get_a_stacktrace_for_a_bug_report

  • How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

    How to prevent iTunes for Windows from "Updating iTunes Library"?
    My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
    Thanks for any help/suggestions.

    Connect the PC to the library on the NAS. Wait while "updated".
    Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
    Close iTunes on the PC. Do not open iTunes on the Mac.
    Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
    Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
    The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
    Open iTunes on the Mac. It will update again, but that should be last time.
    tt2

  • I downloaded the latest important update to windows vista yesterday, and since then Firefox crashes very soon after enetering the portal of any website I visit, and I want to know if the windows vista update could be doing this?

    Yesterday (23rd March) my computer appeared to perform an auto update of windows vista and since then every time time use firefox it crashes shortly after entering a web portal (after about 1-5 seconds). It even crashes on the BBC news page which I always use to check stability. I have been using Firefox for years and it has just started doing this. However, I examined the programme files and actaully cannot see a windows vista update for yesterday, but I can see that there was a Firefox update, so now I'm a bit confused. Looking at the program files in more details it appears that there was a very major update of Firefox taking place including lots of file extensions. You should also know that your password recovery process doesn't work. I never got the email that is supposed to help me recover a lost password. I am really disappointed with Firefox doing this. It's costing me time and money. Can you help before I give up and go back to using Windows explorer (ugh!). I have thought of simply removing Firefox and starting again with a new download but that might not solve the probelm and I will lose my bookmarks.

    I have an update to my message posted yesterday regarding Firefox crash after vista update. Today it got worse when Firefox wouldn't open at all and Windows explorer also stopped working. Curiously, email was still working, and when I checked another (little used) account on the same PC, I got a perfect connection with Firefox and Explorer. I had to conclude that the latest updates of Vista have interacted with some application only found in my main account on the PC. I tried opening Firefox in its safe mode and I tried opening explorer without Plug ins, but neither worked. Finally I decided the only answer was to do a system restore and wind back the windows software to where it was before the problem. I now have Firefox and explorer restored to working order, but I still don't understand why, because I got a message saying the system restore hasn't worked. Full Comprehension of the cause is beyond my capability, but through trial and error as described above I seem to have fixed it. The suspect vista updates are KB2505189 , and KB2524375.

  • Java program are limited as Administrator after windows 7 update

    I have updated the windows 7.
    The java program(packaged by InstallAnywhere 2008 Enterprise) can be executed when I login the system as ordinary user.
    but the error will occur when I execute the java program as Administrator,please refer to the below error information.
    (The java program can be executed correctly before the windows 7 update, so I think there maybe some new restriction for the java if login as Administrator )
    >>It fails to install with this error msg.
    >>
    >>java.lang.NoClassDefFoundError: Could not initialize class ZeroGah
    >> at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
    >> at com.zerog.ia.installer.LifeCycleManager.g(DashoA8113)
    >> at com.zerog.ia.installer.LifeCycleManager.h(DashoA8113)
    >> at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
    >> at com.zerog.ia.installer.Main.main(DashoA8113)
    >> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    >> at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    >> at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    >> at java.lang.reflect.Method.invoke(Unknown Source)
    >> at com.zerog.lax.LAX.launch(DashoA8113)
    >> at com.zerog.lax.LAX.main(DashoA8113)
    *************************************************************************************************

    The only thing that I can see here is that some installer is failing; this is not the place to ask for support with that installer.

  • Since windows 7 updated I noticed I can no longer view anything on youtube. It works fine on Internet Explorer which I don't care to use

    Question
    since windows 7 updated I noticed I can no longer view anything on you tube. It works fine on Internet Explorer which I don't care to use

    There are some compatibility issues between the latest Flash player and some Firefox add-ons or settings. Could you see whether anything in this article helps: [[Flash 11.3 doesn't load video in Firefox]].

  • HT4235 I have tried everything previously suggested and I cannot get my laptop to recoginze my Apple Devices since the latest Windows 8 update!

    Here is the result of my iTunes Diagnostics Report. Please HELP!
    Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
    Hewlett-Packard HP Pavilion g6 Notebook PC
    iTunes 11.1.5.5
    QuickTime 7.7.4
    FairPlay 2.5.16
    Apple Application Support 3.0.1
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.1.3
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number  (Removed)
    Current user is not an administrator.
    The current local date and time is 2014-05-02 12:50:35.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        { }
    Description:            Microsoft Wi-Fi Direct Virtual Adapter #2
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 19:00:00 1969
    Lease Expires:       Wed Dec 31 19:00:00 1969
    DNS Servers:        
    Adapter Name:        { }
    Description:            Microsoft Wi-Fi Direct Virtual Adapter
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:    0.0.0.0
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 19:00:00 1969
    Lease Expires:       Wed Dec 31 19:00:00 1969
    DNS Servers:        
    Adapter Name:        { }
    Description:            Realtek PCIe FE Family Controller
    IP Address:             0.0.0.0
    Subnet Mask:          0.0.0.0
    Default Gateway:  
    DHCP Enabled:      Yes
    DHCP Server:        
    Lease Obtained:     Wed Dec 31 19:00:00 1969
    Lease Expires:       Wed Dec 31 19:00:00 1969
    DNS Servers:        
    Adapter Name:        { }
    Description:            Ralink RT3290 802.11bgn Wi-Fi Adapter
    IP Address:             
    Subnet Mask:            Default Gateway:   
    DHCP Enabled:      Yes
    DHCP Server:       
    Lease Obtained:     Fri May 02 11:50:41 2014
    Lease Expires:       Sat May 03 11:50:41 2014
    DNS Servers:        
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is NOT enabled in Windows Firewall.  (This is incorrect. It is enabled).
    Connection attempt to Apple web site was successful.
    Connection attempt to browsing iTunes Store was successful.
    Connection attempt to purchasing from iTunes Store was successful.
    Connection attempt to iPhone activation server was successful.
    Connection attempt to firmware update server was successful.
    Connection attempt to Gracenote server was successful.
    Last successful iTunes Store access was 2014-05-02 12:47:06.
    **** Device Connectivity Tests ****
    iPodService 11.1.5.5 (x64) is currently running.
    iTunesHelper 11.1.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    No Universal Serial Bus Controller found.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPhone 4S running firmware version 7.1
    Serial Number:       
    iPad 2 running firmware version 7.0.4
    Serial Number:       
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    Hello,
    Thank you for visiting Apple Support Communities.
    If your device is not recognized by iTunes, I would recommend the steps in the article below.  Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H.

  • CD/DVD completely disappears after Windows XP updates

    I had this happen twice now, on my 3 year old Toshiba Satellite P35-s605.
    The internal CD/DVD drive works fine, then all of a sudden, it completely disappears from the system. Discs do not play, and the drive does not show up in Explorer.
    Likewise, it's the same with my external USB CD/DVD drive; it works fine, then it no longer shows up even though the USB "boing" indicates that the computer reads that a device has been connected.
    The last time it happened, I reinstalled the original recovery disk. That seemed to correct the problem. It disappeared again after a Windows XP update (I have not yet added any software besides the OS).
    Has anyone had this problem, and has anyone solved it?

    Satellite P35-S605 
    The last time it happened, I reinstalled the original recovery disk. That seemed to correct the problem. It disappeared again after a Windows XP update (I have not yet added any software besides the OS).
    I have never heard of a Windows Update causing that sort of problem. It sounds like hardware.
    Have you ever tried this fix?
       CD / DVD drive missing from 'My Computer' (Windows Explorer)
    -Jerry

  • Satellite A205-S4607 doesn't start after windows vista update

    Hello,
    I was installing windows vista updates, but the battery was low and the computer turned off, then, the computer doesn´t start, only the hard disc led is light but the screen is black, please can you help me?
    The model is Satellite A205 -S4607

    Thanks for your advice, but the problem is very complicate, the computer doesn't boot up, only the led te HD is ligthing, I removed the HD and the memory but doesn't work, I've read that the problem could be the bios, and the recomendation is remove the battery of the board to reset the bios, but I think it is very dangerous.
    Message was edited by: Nvillegas

  • T61 no sound after Windows (Vista) update (?)

    I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all.  I cannot hear files locally or on the Net -- or any of the computer sounds.
    i realize now that it has happened after a Windows (Vista) update.  I have done every step but 6.
    I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable). 
    http://support.microsoft.com/kb/948481
    >> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
    Message Edited by Suntea on 06-27-2008 12:50 PM

    I have purchased a T61 in December 2007. The sound has always been low and now i have no sound at all.  I cannot hear files locally or on the Net -- or any of the computer sounds.
    i realize now that it has happened after a Windows (Vista) update.  I have done every step but 6.
    I have Speakers (SoundMax Integrated Digital HD Audio). The sound keeps defaulting to to Line 2 Muv Enum (Virtual Cable). 
    http://support.microsoft.com/kb/948481
    >> Update -- perhaps this will help someone else. After doing steps 1-5 (at support link), I redid step #3 and now it's working.
    Message Edited by Suntea on 06-27-2008 12:50 PM

Maybe you are looking for