Windows 7 updater repeats its updates

windows 7 updater repeats its updates
walter shebib

Hi Daniel
I have done an RSOP on a VM I am testing and only have the user policy :
Remove Access To All Windows Update Features which is set to
0 - Do not show any notifications.
And the machine policy :
Specify intranet Microsoft update service location which is set to
Enabled The GPO Name is Local Group Policy
The policies look OK.
As a test I have deployed some updates and set the user experience to
Display all notifications and set the Suppress restarts
for both Servers and Workstations. When I deploy the updates, I get notifications that the updates are installing (when the deadline is met) and then I get a prompt telling me that a restart is required. I also get a windo letting me restart now
or I can ask to be reminded in x number of hours. This seems like expected behaviour. It does not force a restart. However if I leave the VM on over night I come in the following day and can see it has restarted. looking at the WindowsUpdate.log I
can see that at 3:15am the line AUInvoking reboot system. It looks like Windows Updates and not SCCM is forcing the restart.
Thanks

Similar Messages

Windows security update error code 80092004

I am repeatedly trying to update my windows security setting via windows vista update. One important update was not completed with consistent accuracy. its called error code 80092004. The hard disk has plenty of space, the update was 8.5mb, it always hung on 11% without going further during download and the the error code is flashed with red buttons to say one one imporatn update has failed. I did this umpteen times over a few days now withou success. Can anyone help?

I am repeatedly trying to update my windows security setting via windows 7 home basic 64 bit update.
One important update was not completed with consistent accuracy. its called error code 80092004 as cumalative security update for internet explorer 11 for window 7 for x 64-based systems (KB3038314) during window update after just reinstallation /recovery
of operating system & vaio updates.The hard disk has plenty of space, the update was 42.7mb, it always hung on 11% without going further during download and the the error code is flashed with red buttons to say one one important update has failed. I did
this above afford more times by one by one over 2 days without success. Can anyone help? plz solve my issue with proper link

I downloaded the latest important update to windows vista yesterday, and since then Firefox crashes very soon after enetering the portal of any website I visit, and I want to know if the windows vista update could be doing this?

Yesterday (23rd March) my computer appeared to perform an auto update of windows vista and since then every time time use firefox it crashes shortly after entering a web portal (after about 1-5 seconds). It even crashes on the BBC news page which I always use to check stability. I have been using Firefox for years and it has just started doing this. However, I examined the programme files and actaully cannot see a windows vista update for yesterday, but I can see that there was a Firefox update, so now I'm a bit confused. Looking at the program files in more details it appears that there was a very major update of Firefox taking place including lots of file extensions. You should also know that your password recovery process doesn't work. I never got the email that is supposed to help me recover a lost password. I am really disappointed with Firefox doing this. It's costing me time and money. Can you help before I give up and go back to using Windows explorer (ugh!). I have thought of simply removing Firefox and starting again with a new download but that might not solve the probelm and I will lose my bookmarks.

I have an update to my message posted yesterday regarding Firefox crash after vista update. Today it got worse when Firefox wouldn't open at all and Windows explorer also stopped working. Curiously, email was still working, and when I checked another (little used) account on the same PC, I got a perfect connection with Firefox and Explorer. I had to conclude that the latest updates of Vista have interacted with some application only found in my main account on the PC. I tried opening Firefox in its safe mode and I tried opening explorer without Plug ins, but neither worked. Finally I decided the only answer was to do a system restore and wind back the windows software to where it was before the problem. I now have Firefox and explorer restored to working order, but I still don't understand why, because I got a message saying the system restore hasn't worked. Full Comprehension of the cause is beyond my capability, but through trial and error as described above I seem to have fixed it. The suspect vista updates are KB2505189 , and KB2524375.

RH Window not updating / topics not displaying after repositioning

Hi,
I'm running RH8.0.2 on a 32-bit version of Windows 7. In the last few days I've had peculiar problems with the RH Window itself (not compiled help) not refreshing properly.
For example, I want to compare a Word document to a help topic, so I resize the RH window and position it next to the Word document. I open several topics and do what I need to do. Now I'm done with the Word document, so I maximize the RH window again. This is when the problems start:
The navigation along the top (including the topic tabs) does not refresh.
If I double-click a topic in the left pane, it is sometimes not displayed on the right side, although the cursor movements indicate that RH thinks the topic is displayed. (This is hard to explain, and crazily enough I can't even get a screenshot of this to show what I mean.)
If I reduce the window size back to its previous, smaller size, things look normal again and I can see the topic I just double-clicked. But if I want to use RH in a maximized window again, I have to close and reopen the RH project.
Yes, these problems can be dealt with. But this has been going on for several days now (after a Windows update, perhaps?) and it's getting annoying.
Is anybody else experiencing these problems? Is there a solution?
Thanks
Eileen

Thank you for those suggestions, Peter!
You were right - I was dragging the two windows to where I wanted them.
I haven't yet tested your suggstions extensively (I don't spend a lot of time with RH side by side by side with other applications). However, I haven't seen the problem since I started using Windows key + arrows to position the windows.
BTW, RH is the only application where I was having this problem.
I will post again (or edit this post) if I come up with any new information. Even if no one else has posted about this problem, I'm betting that others are experiencing it. As I said, it's relatively easy to work around. Just annoying.
Thanks again!
Eileen

Lenovo G780 stuck in Automatic Repair Loop after Windows 8 update

My recent Windows 8 update stuck my computer into an infinite automatic repair loop which results in a blue screen amd the process repeats itself. I tried the OneKey restore feature and the system recovery feature just hangs then it goes back to the same loop issue with rebooting. I called Lenovo for recovery discs since I don't have any any but my concern is does it matter if I mentioned whether I had a 32 or 64 bit OS? I told her to make sure it was for a Windows 8 system amd she just said it works for the G780 models. I'm just hoping these discs work.for a 64 bit system

It should work. Support cannot send you recovery disks if you didn't provide them your serial number. They can check the correct pre-installed OS from your serial number so I'm sure they're sending out the correct disks.

Windows server update services installation failed the update could not be found

Hi everybody...
I have tried to install WSUS Role on windows 2008 r2 ent server. its says windows server update services installation failed.
actually the wsus role for SCCM 2007, asper the prerequesite i have finished all other steps, only wsus role is pending.. please help..

Thanks FinMaky,
The keys are:
(1) to delete WindowsUpdate registry keys, and then
(2) enable/restart Windows Update services.
(3) also to make sure there's no WSUS policy defining update server is in place
This resolves my issue.
BIG THANKS!
Tuesday, April 05, 2011 1:53 PM
Reply
|
Quote
|
Report
as abuse
FinMaky
---Pat

Windows 7 SP1 Upgrade - Stuck at Windows Desktop Update

Ok so I have a 4 year old laptop that had Windows 7 Ultimate on it. It is a Intel dual core computer with 4GB of RAM.
I left it over night to download and install the SP1 patch. I wake up this morning and sign in, it shows a black screen and in the upper left it has "Setting up personalized settings for: Windows Desktop Update"
I thought that this might take some time so I left for about an hour, now I am back and this screen is still there. I fear that it has broken itself and that it is broken. Is there a way to fix this issue?

During the Black screen, try using Ctrl Alt Delete
Go to task manager
check your CPU usage (mine was at zero when i did this)
Go to processes
and end both the
processes that start with Reg (I apologize i cant fully remember the name of it)
Make sure you do this by right clicking and ending the process tree
This is how i got past that screen, and my laptop seems to be working fine and its been a few days since

Help no windows 10 update not showing on my Miix 3 10 inch tablet

Anyone else had there Windows 10 update option on a Miix 3 10 inch tablet with keyboard dock.I have installed very few small items , space available just over 12gb. My tablet is fully upto date. Advice please
TYI

okay, it showd up and even downloaded to install but as soon as the tablet restarts and the upgrade initiates, it automaticlly reboots itself into 8.1, and it seems like nothing has happened.Repeated this process twice now!!!

P505 Widnow 7 After Recovery, All Tosbiba HW driver report unsigned driver and no Window 7 Update

Hello,
I just clean up the HD and use the recovery media that created after I get the system to recover my wife's Satellite P505-S8980 system due to some virus causing the system problems. I recover the system to a brand new harddisk with all the default options. Window 7 recovered successfully.
After the finial boot, the screen turn to lower resolutions and once login, I went to device manager report that the Video, Wifi, Ethernet and SD Card reader were all unsigned driver and do not able to start them. I then try to do F8 during reboot to bypass driver verification, window working just fine. But if I boot it normally, it will have problem with those drivers. I think also try to install newer driver from Support webstie, those driver have the same problem.
I was trying to do a Window update, it always fail to update. How can it be fixed? Both driver problem and Window 7 update. I guess this problem must be linked.
Mcken

Satellite P505-S8980
..use the recovery media that created after I get the system to recover
I would do the very same thing again, that is, restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. (You can do it from the hard disk directly. See p. 62 in the User's Guide.)
If the trouble occurs before making any changes, then there is almost certainly a hardware problem. To be sure, you could reflash the BIOS.
-Jerry

G50-45 : windows 10 update is not working

Hi G50-45 : windows 10 update is not working ive installed 6 times whole 3 gb data ... BUT its not getting installed .. this is the error Search results for "WindowsUpdate_80200056 OR WindowsUpdate_dt000"‎ (1) ive tried installation via usb tooit ask for serial number .. when i enter serial of 8.1 it says login as normal windows and then restart please suggest regards rahul

HI ive just retried to do install.. it says : something happened .... and then installaed stopeed at 30 % regards

I am getting a service start and stop alert while doing the windows server updates.

HI
I am getting a service start and stop alert while doing the windows server updates. Services are wmiApSrv , WPDBusEnum. Can you please help me to under stand why i am getting the service start and stop alert.
Thanks & Regards
Abhilash K Joy

Hi,
The WMI Performance Adapter (wmiApSrv) service provides performance library information from Windows Management Instrumentation (WMI) providers to clients on the network. This service only runs when Performance Data Helper is activated.
This service is installed by default and its startup type is Manual. When started in the default configuration it will log on using the Local System account.
You can try troubleshooting the issue using Clean Boot to check if the issue is related to third-party software.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135/en-us
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Firefox will not open and crashes after my lastest Windows 7 update on April 21st, 2015

After I completed the latest Windows 7 Update I have not been able to access Firefox. Upon opening the program I am given "Firefox has stopped working" message as the image shows. Never had any issues with Firefox before. I have Uninstalled and Reinstalled the latest Firefox version with the same results.
Please guide me to fix this problem
Adam

You can check if you can start Firefox in [[Safe Mode|Safe Mode]] by holding down the Shift/Options key.
*https://support.mozilla.org/kb/Safe+Mode
If you have submitted crash reports then please post the IDs of one or more recent crash reports that have a "bp-" prefix:
*bp-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
You can find the Report ID of recent crash reports on the "Help > Troubleshooting Information" page (about:support).
*Click the "All Crash Reports" button on this page to open the about:crashes page and see all crash reports.
If necessary then you can open about: pages via the location/address bar.
See:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter
*https://support.mozilla.org/kb/Mozilla+Crash+Reporter
If you can't open Firefox, see:
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Location_of_crash_reports
*http://kb.mozillazine.org/Mozilla_Crash_Reporter#Viewing_crash_reports
*https://developer.mozilla.org/How_to_get_a_stacktrace_for_a_bug_report

How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

How to prevent iTunes for Windows from "Updating iTunes Library"?
My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
Thanks for any help/suggestions.

Connect the PC to the library on the NAS. Wait while "updated".
Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
Close iTunes on the PC. Do not open iTunes on the Mac.
Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
Open iTunes on the Mac. It will update again, but that should be last time.
tt2

Java program are limited as Administrator after windows 7 update

I have updated the windows 7.
The java program(packaged by InstallAnywhere 2008 Enterprise) can be executed when I login the system as ordinary user.
but the error will occur when I execute the java program as Administrator,please refer to the below error information.
(The java program can be executed correctly before the windows 7 update, so I think there maybe some new restriction for the java if login as Administrator )
>>It fails to install with this error msg.
>>
>>java.lang.NoClassDefFoundError: Could not initialize class ZeroGah
>> at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
>> at com.zerog.ia.installer.LifeCycleManager.g(DashoA8113)
>> at com.zerog.ia.installer.LifeCycleManager.h(DashoA8113)
>> at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
>> at com.zerog.ia.installer.Main.main(DashoA8113)
>> at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
>> at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
>> at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
>> at java.lang.reflect.Method.invoke(Unknown Source)
>> at com.zerog.lax.LAX.launch(DashoA8113)
>> at com.zerog.lax.LAX.main(DashoA8113)
*************************************************************************************************

The only thing that I can see here is that some installer is failing; this is not the place to ask for support with that installer.

Since windows 7 updated I noticed I can no longer view anything on youtube. It works fine on Internet Explorer which I don't care to use

Question
since windows 7 updated I noticed I can no longer view anything on you tube. It works fine on Internet Explorer which I don't care to use

There are some compatibility issues between the latest Flash player and some Firefox add-ons or settings. Could you see whether anything in this article helps: [[Flash 11.3 doesn't load video in Firefox]].

Windows 7 updater repeats its updates

Similar Messages

Maybe you are looking for