Windows 7 Upgrade Guide for dv6000/dv9000 models

Statement:
You are using this guide at your own risk. I don't take any responsibility for any problems.
Things which you should know and do before upgrade:
     1. HP may demand you to reinstall back Vista if you will have any hardware problems to troubleshoot them.
     2. HP will not help you if you will have any software problems because this models are not officially supported
          with Windows 7.
     3. Before you will upgrade to Windows 7 please make Vista Recovery CD/DVD. How to do it all informations here.
     4. All Vista drivers and pre-installed software by HP for your model are in C:\swsetup folder. 
          If you still have it on your HDD then copy this folder to CD/DVD. You may need them someday.
   5. Users with nVidia graphic card should check temperature of this device before upgrade.
        This way you will know is it working ok in Windows 7 too.
         How you may check your notebook CPU (processor), GPU (graphic card), motherboard or HDD temperature?
         To do that use HWMonitor (free and recommended) or Aida64.
How to find out which model you've got and specifications for it:
      1. Click on Support & Drivers link. (Upper part of this page.)
      2. In search box type your laptop product number (p/n).
          Resource:
          How to Locate the Notebook p/n
      3. Under notebook picture you will find your notebook model name (example: HP Pavilion dv6205eu Notebook PC).
      4. On the same page click on Product Information -> Product Specifications and you will find all informations about
           your notebook hardaware.
How to install Windows 7 and what you should know while upgrading:
      1. Guide: How to Do a Clean Installation with Windows 7
      2. All Windows 7 drivers you will find in next post below.
      3. Some drivers have comment then they are originaly made for Vista system.
          When normal installation will fail, then try to run unsuccessfully installed file in Compatibility Mode (Windows Vista,
          Windows Vista Service Pack 1 and Windows Vista Service Pack 2).
          Resources:
          Make older programs run in this version of Windows
          How to Run a Program in Compatibility Mode in Windows 7
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
This question was solved.
View Solution.

CHIPSET DRIVERS 
Solution on COPROCESSOR with yellow exclamation mark () 
If you have Intel processor:
Intel Chipset (Install and reboot before other drivers) here (ver 9.1.1.1025 for 32/64 bit Win7)
Intel Rapid Storage Technology here (ver 10.1.2.1004 for 32/64 bit Win7)
If you have AMD processor:
For dv60xx, dv61xx, dv62xx, dv63xx, dv64xx, dv90xx, dv91xx, dv92xx, dv93xx and dv94xx models (example: dv6367am means that your model is dvx3xx, dv9421xw means that your model is dv94xx):
nVidia Chipset (Install and reboot before other drivers) here   (Vista)
For dv65xx, dv66xx, dv67xx, dv68xx, dv69xx, dv95xx, dv96xx, dv97xx, dv98xx and dv99xx models (example: dv6981tu means that your model is dv69xx, dv9721tu means that your model is dv97xx):
nVidia Chipset (Install and reboot before other drivers) here   (Vista)
Important information for users with nVidia chipset!
If you have 4GB of RAM or more then check Microsoft knowledge base article about solution on some problems which you may have here.
GRAPHIC DRIVERS
Intel Graphic:
    Intel 950 and Intel X3100 here (ver 15.12.75.4.1930 for Win7 32 bit) or here (ver 15.12.75.4.1930 for Win7 64 bit)
nVidia  Graphic:
  Important information!
   If you have installed any nVidia drivers for graphic card then before you will install other version you will
   need to remove old drivers first. Check below guide how to do it (this is not standard uninstallation
   process):
   How to remove nVidia graphic drivers from Windows system.
   Drivers:
    nVidia GeForce 8400M GS and nVidia GeForce 8600M GS:
         OPTION 1
         Version 267.76 here for Windows 7 32 bit or here for Windows 7 64 bit.
         OPTION 2
         Version 197.16 here for Windows 7 32 bit or here for Windows 7 64 bit.
         Note:
         Remember to uninstall previous graphic card driver first.
    nVidia GeForce GO 6150M, 7150M, 7200M, 7400M or 7600M:
          OPTION 1
          First try to install original Vista drivers for your model.
          Resource:
          How to find all Vista audio and graphic drivers for specific model on HP sites?
           OPTION 2
           If original drivers will not work then try modded drivers ver 195.81.
        Note:
        Remember to uninstall previous graphic card driver first.
        How to install them under Windows 7?
           1. Download driver here (for Win7 32 bit) or here (for Win7 64 bit) double click and select extract,
           2. Download from this site with drivers also INF Modified and replace original INF in extracted folder,
           3. Install & reboot.
     OPTION 3
           Last thing which you may do is installing graphic driver from Windows Update.
        Note:
        Remember to uninstall previous graphic card driver first.
     1.Open Windows Update by clicking the Start button , clicking ' All Programs ', and then clicking '
                 Windows Update '.
     2.In the left pane, click ' Check for updates ' , and then wait while Windows looks for the latest updates
                 for your computer.
     3.Select the ' Optional Updates ' and install from there only driver for your graphic card.
AUDIO DRIVERS
Conexant HD Audio
         Use original Vista drivers for your model.
         Resource:
         How to find all Vista audio and graphic drivers for specific model on HP sites?
Realtek HD Audio 
         Use original Vista drivers for your model.
         Resource:
         How to find all Vista audio and graphic drivers for specific model on HP sites?
         If Vista drivers will not work well for You then try to use official Realtek one from here (for 32/64 bit Win7). 
         When you will enter this link check there "I accept to the above." and after that click ' Next ' button.
MODEM DRIVERS
Conexant Modem here (ver 7.61.0.0 A)   (Vista) - If you have Conexant audio card
Motorola SM56 Modemhere (ver6.12.6.0 A)   (Vista) - If you have Realtek audio card
HP QUICK PLAY 
HP QuickPlay here (ver 3.7 v.6112 for 32/64 bit Win7)
Notes:
It must be installed before HP Quick Launch Buttons.
You've installed this software and it hangs while using?
      Uninstall your current HP QUICK PLAY version and install this which you had in Vista.
      Resource:
      Uninstalling Software in Windows 7
      Uninstall or change a program in Windows 7
      If you burned CD/DVD with C:\swsetup folder as suggested in guide then you will find it there.
HP Quick Launch Buttons
Solution onKEYBOARD FILTER with yellow exclamation mark ()  
HP Quick Launch Buttons here (ver 6.50.13.1 for 32/64 bit Win7)
WIRELESS DRIVERS
Intel Wireless here (ver 13.0.0.107 for 32/64 bit Win7)
Broadcom Wireless here (ver 5.60.48.35  for 32/64 bit Win7)
Atheros Wireless here (ver 8.0.0.316  for 32/64 bit Win7)
HP Wireless Assistant here (ver 3.50.12.1 for 32/64 bit Win7)
Bluetooth Wireless here (ver 6.5.0.2000  for 32/64 bit Win7) Only for models with Bluetooth.
Note:
How to install Bluetooth driver?
Check the link below:
How to install HP Bluetooth driver in Windows 7.
ETHERNET DRIVERS
Realtek RTL8101 Lan here  (for 32/64 bit Win7) Only for models with Intel processor.
Models with AMD processors don't need to install any extra file for ethernet., because drivers for it are in chipset package.
CARD READER
Solution on BASE SYSTEM DEVICE with yellow exclamation mark () 
Ricoh 5-1 Card Reader Driver here (ver 6.10.01.03  for 32/64 bit Win7)
TOUCHPAD DRIVER
Synaptics TouchPad here (ver 16.0.1.0  for 32/64 bit Win7)
Note:
By default is enabled Two - Finger Scrolling. If you want to use only one finger for scrolling then check the link below:
How to change Two - Finger Scrolling on One - Finger Scrolling in Synaptics TouchPad software.
ONLY IF YOUR MODEL HAS:  WEBCAM 
Cyberlink YouCam here (ver 2.0.3115  for 32/64 bit Win7)
Note:
If you have any problem with your webcam then check below links to HP documents:
Fixing Webcam Problems in Windows
Testing a Webcam using Your Favorite Instant Messenger
3VRX (optional software)
on-screen visuals and associated sounds that are displayed and heard when adjusting volume
3VRX here (ver 2.5 for 32/64 bit Win7)
Note:
Here is YouTube video which shows what can be done with this software.
ONLY IF YOUR MODEL HAS:  FINGERPRINT READER
1. Uninstall all previous fingerprint reader drivers and software
       Check below guide how to do it (this is not standard uninstallation process):
     How to uninstall AuthenTec fingerprint software and driver
2. You may install now correct fingeprint reader driver and software.
       There are available two applications to this device:
        - AuthenTec TrueSuite
       and
       - DigitalPersona Personal (recommended).
       Information on how to install both softwares you will find in below guides:
       AuthenTec TrueSuite, AuthenTec fingerprint and Windows 7
     DigitalPersona Personal, AuthenTec fingerprint and Windows 7
ONLY IF YOUR MODEL HAS: DVD DRIVE WITH LIGHTSCRIBE
How can you check is your DVD drive with Lightscribe?
On DVD panel there will be Lightscribe logo.
LightScribe Host Software here (ver 1.18.22.2   for 32/64 bit Win7)
Report of the changes which were made in the guide
Edited  16-01-2010  Updated Synaptics TouchPad driver to ver 14.0.3.1, Updated Broadcom driver to ver 5.60.18.41
Edited  18-01-2010  Updated nVidia Graphic section. Added drivers for nVidia GeForce 8400M GS and nVidia GeForce 8600M GS (ver 195.62)
Edited  19-01-2010  Updated LightScribe Host Software to ver 1.18.10.2
Edited  05-02-2010  Updated fingerprint drivers, software and added fingerprint guides.
Edited  27-02-2010  Updated LightScribe Host Software to ver 1.18.11.1
Edited  03-03-2010  Updated HP Quick Launch Buttons to ver 6.50.13.1
Edited  20-03-2010  Updated Synaptics TouchPad to ver 15.0.9.0 (this version enables multitouch gestures)
Edited  21-03-2010  Added two guides. How to remove nVidia graphic drivers from Windows system and How to install HP Bluetooth driver in
                                Windows 7.
Edited  25-03-2010  Updated LightScribe Host Software to ver 1.18.12.1
Edited  26-03-2010  Changed Intel Matrix Storage Manager name to Intel Rapid Storage Technology, added Intel Rapid Storage Technology
                                to ver 9.6.0.1014
Edited  31-03-2010  Updated nVidia Graphic section with uninstallation guide, Updated drivers for nVidia GeForce 8400M GS and 8600M GS
                                to ver 197.16
Edited  10-04-2010  Updated LightScribe Host Software to ver 1.18.13.1
Edited  04-05-2010  Updated LightScribe Host Software to ver 1.18.14.1
Edited  05-05-2010  Updated Synaptics TouchPad driver to ver 15.0.13.0, Updated HP QuickPlay to ver 3.7 v.6112
Edited  21-05-2010  Updated Bradcom wireless to ver 5.60.48.35, Updated Atheros wireless to ver 8.0.0.316, Updated Synaptics touchpad
                                to ver 15.0.13.3
Edited  24-05-2010  Updated HP Wireless Assistant to ver 3.50.11.2
Edited  24-06-2010  Updated Synaptics TouchPad to ver 15.0.17.4
Edited  30-07-2010  Updated Broadcom wireless - the same version but with some improvements, Updated HP Wireless Assistant to ver 3.50.12.1
Edited  01-04-2011  Added drivers for nVidia GeForce 8400M GS and nVidia GeForce 8600M GS (ver 267.76)
Edited  02-04-2011  Updated LightScribe Host Software to ver 1.18.22.2, Added one guide: How to change Two - Finger Scrolling on One - Finger
                                Scrolling in Synaptics TouchPad software.
Edited  14-12-2011  Updated driver for Intel® Rapid Storage Technology
Edited  07-05-2012  Updated driver for HP Bluetooth to ver 6.5.0.2000, Synaptics TouchPad driver to ver 16.0.1.0, Updated guide: How to install
                                HP Bluetooth driver in Windows 7
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Similar Messages

  • How to get Upgrade Guide for Web AS 6.40 SP19

    Hello,
    Is there any one can help me to find the Upgrade Guide for Web AS 6.40 SP19 (Java, Windows)?
    Thanks,

    check
    http://service.sap.com/instguides
    Thanks
    Prince Jose

  • Upgrade guide for users of older versions of Flash Media Server?

    I'm looking around to see if anyone has sort of done a crossover or upgrade guide for people with older FMS installations.
    We've been running the server since at least version 2, and haven't had to change much in upgrading to subsequent versions.
    In doing so, we hadn't had to change to some of Adobe's newer ways of doing things with regards to configuration files, etc.
    In setting up a test 4.5.x server, though... it appears we will likely want to really change the way we are doing things.
    I'm wondering if anyone knows of a comprehensive site that would sort of cover topics in a "if you did this this way before, do it this way now" sort of instructions.
    Thanks

    we just moved from 3.5 to 4.03 and now the sound has 'hiccups' - looked thru forum and made some changes but still happening - be nice like you said if there was a 'your using this version, and this is what you need to do in the next' area

  • Firmware history for HP DV9000 model dv9317cl

    I recently acquired a DV9000 model dc9317cl laptop and I am trying to find the maximum amount of memory I can put in it. I have found several documents stating that 2gb is the max but there are also several others saying that after putting the latest firmware in a different model DV9000, they were able to put 4gb and even 8gb into it and it was recognized. I know the all HP documentation  says 2gb is the max but sometimes bios updates come out that allow different options and that doesn't really get documented very well. So I figure if I can find the history for the firmware for the DV9000 dc9317cl model, I would find exactly what has changed or been fixed. Right now I have F.38 bios which was the latest I could find.
    Any help or info would be greatly appeciated.
    This question was solved.
    View Solution.

    The DV9000 series goes up to DV99XX and the ones above DV9499 use a different motherboard,so no the memory limits will not be the same on all. Also some are Intel,some are AMD w/different motherboards.
    For instance the DV2000/DV6000/DV9000 are all very similiar. I have a DV2810us which runs 3gb of memory from the factory -but it is in the series above DV2499. Now, I am not saying 100% that your model can't use more memory-but even Crucial memory site says 2GB is the limit for that model & that is the only configuration they will sell with guaranteed compatibilty.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Windows 10 Upgrade guide for Tablets

    Results may vary depending on Models, confirmations needed.Installed & Tested on Lenovo MIIX 2 8 64GB (Please post your model if this has worked for you) **PLEASE PROCEED AT YOUR OWN RISK, I AM NOT LIABLE/RESPONSIBLE FOR ANY DAMAGES** Windows 10 is finally here, have you reserved your copy of the Free Upgrade yet? Here are some tips and guidelines to help you start the process.(If you have already reserved your copy, but the system hasn't prompted you for the update, you may need to download the manual install or force start the upgrade/update process. (See below for more details)) How to Reserve your copy of Windows 10 Free Upgrade Today IMPORTANT!!! DO NOT UPDATE YOUR SYSTEM WITHOUT RESERVING!! (You will be prompt to enter a Win10 product key for activation)Make sure you have reserved your copy of the Free Upgrade via 'Software Updates', there should be a windows logo in the 'Notification Area', click and reserve your copy today.Once you have your copy reserve, you may or may not get prompted for the update/upgrade. You can either wait for the official notification, or you can download the ISO or force the update process via 'Software Update'.Can't reserve your copy due to missing update icon on taskbar? Check this Guide. How to Start Upgrading to Windows 10 If you have been prompt by the 'Windows Update' , you can start upgrading by following the onscreen instructions.If you have not been prompt by 'Windows Update', you may need to wait for the official announcement to be pushed out.Check this website for Force Update procedures.How to Upgrade Windows 10 using ISO Download the Microsoft Media Tool Creation via microsoft.comRun the tool and Choose Upgrade or Download the ISO.Download daemon tools to mount the ISORun SetupHow to Upgrade Windows 10 using bootable USB (OTG Cable Required)Download the Microsoft Media Tool Creation via microsoft.comRun the tool and Download the ISODownload the Rufus Bootable USB creation app to create a bootable USB.Leave everything default except for Partition Scheme to ''GPT partition scheme for UEFI computer".Choose ISO and 'Start'.Once done, you can boot the USB or run Setup.exe in windows 8.1 (Setup.exe is recommended)I will keep this updated.Please let me know if there's a mistake or i'm missing a step. Enjoy your new OS. Vampirexhunter

    Clean InstallOnce you have upgrade and activated your copy of Windows 10. You can do a clean install from the USB bootable, when prompted to enter 'Product Key', press 'Skip Step' to proceed. Once Windows is fully installed and setup, it should activate on its own.You may need to download the Win 8.1 drivers for your device.For Intel HD Graphics Drivers, you will need to download the latest ZIP and do a manual driver update in 'Device Manager'.Common ProblemsActivation may require a few tries, due to high traffic volume.Some users have reported the SD Card causing issues during Installation, it is recommended to remove the SD card prior to upgrading/installing your OS.Compatibility IssuesSeveral Users have reported technical difficulties installing Windows 10 on an Intel Based Z2760 Tablets, due to the incompatibility drivers for the Intel Graphics Media Accelerator(Intel GMA). No fix have been reported so far.

  • Windows 8 Upgrade guide for IdeaPad Systems

    Hi ,
    I am  trying to install WIN8 using usb ITS NOT WORKING , after selecting the correct  BOOT OPTION from BIOS , when i hit enter screen goes black and don't turn up .
    The USB is bootable as using the same USB i have installed into another system

    hi ravisingh08,
    Welcome to the Community.
    Are you trying to upgade a previous version of WIndows 8? (i.e. Windows 8 to Windows 8 Pro)
    If you are, try to:
    1. Boot into the BIOS
    2. Set the following settings:
    Boot Tab
    UEFI = Disabled
    UEFI Boot = Disabled / Legacy First (if applicable)
    Security Tab
    Secure Boot = Disabled (if applicable)
    Exit Tab
    OS Optimized Defaults = Other OS (if applicable)
    If not, what is the model and preloaded OS of the IdeaPad system?
    Let me know your findings,
    neokenchi
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Technical Upgrade Guide for Custom Code

    Hi,
    My client is in the process of upgrading from 11.5.9 to 12.1 and has a relatively large customisation footprint.
    There is a wealth of infomation on high-level technical changes made in R12 i.e. banks moved to TCA, suppliers moved to TCA etc. however there is little information on schema or low-level changes.
    On a site with a large amount of customisations such as this it is often unfeasible to analyse every piece of code. In this case the client has to rely on customisations failing on compilation or execution to determine that an upgrade fix is required.
    However, certain changes in R12 have been implemented in a way which will not highlight a problem using the approach above. For example, the table RA_ADDRESSES_ALL is retained in the archive tablespace however addresses are now maintained in TCA. Code that references this table will pass compilation however will reflect incorrect data.
    Naturally Oracle are not responsible for custom extensions to the E-Business suite however it would be useful if there was a document which detailed the changes that needed to be made to make them compatible with R12.
    Is there a published document on recommended upgrade checks required for custom code that I have missed?
    Is there any further information that could be of assistance in this area?
    Many thanks

    I asked the developer working on this, for steps to duplicate the error, and I followed them:
    "...the easiest way I’ve been testing it, is to log into US Super HRMS Manager | People Enter and Maintain. When the window pops up to search for a person, just click the New button like you’re going to enter a new hire. Type in a last name, first name, Mr/Mrs, then click the drop down on the top right for “Create Employment.” Then click on the field below that for the employee number. Then the message will appear.
    I have noticed that it will allow you to click OK through the message and continue, and if you stay in the form and try to create another new person, the message doesn’t seem to come up a second time. But, if you log out and in and try again, you will get the message again."
    When the message pops up, it spews quite a bit of data, and then stops until I click something.
    Below is the text from one "USER_EXIT" of the full spew up to the one that looks like an obvious error, and it stops until I click OK on the "Application Emergency Message" error pop-up:
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND GETPROFILE NAME="CH2_BEN_PPG_ACCESS" FIELD="GLOBAL.OUT" N
    PERWSHRG, 10, Built-In, Entry, 2192221, USER_EXIT
    PERWSHRG, 10, Built-In, Exit, 2192221, USER_EXIT
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: GLOBAL.OUT
    Out Argument 0 - Type: String Value: NULL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: PERSON.D_PTU_USER_PERSON_TYPE
    Out Argument 0 - Type: String Value: Employee
    Executing FIND_ITEM Built-in:
    In Argument 0 - Type: String Value: PERSON.EMPLOYEE_NUMBER
    Out Argument 0 - Type: Integer Value: 786460
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_item_property2.set_property.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 786460
    In Argument 1 - Type: Number Value: 16
    Out Argument 0 - Type: String Value: TRUE
    Executing SET_ITEM_PROPERTY/SET_FIELD Built-in:
    In Argument 0 - Type: Integer Value: 786460
    In Argument 1 - Type: Number Value: 28
    In Argument 2 - Type: String Value: NULL
    In Argument 3 - Type: Oracle Number Value: 4.000000
    In Argument 4 - Type: Oracle Number Value: 0.000000
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_item_property2.set_property.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_ITEM Built-in:
    In Argument 0 - Type: String Value: PERSON.DATE_OF_BIRTH
    Out Argument 0 - Type: Integer Value: 786467
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_item_property2.set_property.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 786467
    In Argument 1 - Type: Number Value: 16
    Out Argument 0 - Type: String Value: TRUE
    Executing SET_ITEM_PROPERTY/SET_FIELD Built-in:
    In Argument 0 - Type: Integer Value: 786467
    In Argument 1 - Type: Number Value: 28
    In Argument 2 - Type: String Value: NULL
    In Argument 3 - Type: Oracle Number Value: 4.000000
    In Argument 4 - Type: Oracle Number Value: 0.000000
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_item_property2.set_property.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing FIND_ITEM Built-in:
    In Argument 0 - Type: String Value: PERSON.D_MARITAL_STATUS
    Out Argument 0 - Type: Integer Value: 786470
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Entering app_item_property2.set_property.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing GET_ITEM_PROPERTY/FIELD_CHARACTERISTIC Built-in:
    In Argument 0 - Type: Integer Value: 786470
    In Argument 1 - Type: Number Value: 16
    Out Argument 0 - Type: String Value: TRUE
    Executing SET_ITEM_PROPERTY/SET_FIELD Built-in:
    In Argument 0 - Type: Integer Value: 786470
    In Argument 1 - Type: Number Value: 28
    In Argument 2 - Type: String Value: NULL
    In Argument 3 - Type: Oracle Number Value: 4.000000
    In Argument 4 - Type: Oracle Number Value: 0.000000
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: Completed app_item_property2.set_property.
    In Argument 1 - Type: String Value: global.frd_debug
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: PERSON.EMPLOYEE_NUMBER
    Out Argument 0 - Type: String Value: NULL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: PERSON.D_PTU_USER_PERSON_TYPE
    Out Argument 0 - Type: String Value: Employee
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: PERSON.EMPLOYEE_NUMBER
    Out Argument 0 - Type: String Value: NULL
    Executing COPY Built-in:
    In Argument 0 - Type: String Value: 0
    In Argument 1 - Type: String Value: PERSON.ATTRIBUTE2
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: PERSON.FIRST_NAME
    Out Argument 0 - Type: String Value: empnew007
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: PERSON.LAST_NAME
    Out Argument 0 - Type: String Value: testemp090
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: PERSON.HIRE_DATE
    Out Argument 0 - Type: String Value: 05-APR-2011
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: PERSON.BUSINESS_GROUP_ID
    Out Argument 0 - Type: String Value: 0
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: PERSON.MIDDLE_NAMES
    Out Argument 0 - Type: String Value: NULL
    Executing NAME_IN Built-in:
    In Argument 0 - Type: String Value: PERSON.SUFFIX
    Out Argument 0 - Type: String Value: NULL
    Executing USER_EXIT Built-in:
    In Argument 0 - Type: String Value: FND MESSAGE_NAME "CH2M_HR_GEN_NOTFOUND" "CH"
    PERWSHRG, 10, Built-In, Entry, 2192221, USER_EXIT

  • Technical upgrade guide for BOE 3.1 SP3 to BOE 4.0 for Unix

    Team,
    can any one help me with a proper tehcnical procedural guide documentation for BOE 3.1 SP3 to BOE4.0 in Unix envieornment.
    None of docs present in the SAP masker palce give a proper tehcnical setaps or approach rather it give me some generic docuemensts whihc are simply wordy with no technical details.
    Am kind of stuck with BPE upgrae from 3.1 SP3 to BOE 4.0 for UNIX (I donot wnat any WINDOWS documentation)
    regards
    Rishi

    Hi,
    yes - finding documentation on UNIX is somethimes painfull. Cause BI4 is currently in Ramp- Up, it is possible that not all Documentation is finished.
    Did you tried this Guide?
    https://websmp104.sap-ag.de/~sapidb/011000358700001237062010E/xi4_bip_upgrade_en.pdf
    Regards
    -Seb.

  • Upgrading APU for Lenovo N586 Model#75840

    I am thinking of upgrading the APU for this laptop with AMD A10-4600m or AMD A10-5750M. I am wondering if these 2 APU are compatible with my Lenovo. Also if there is anything else I need to change in order to get it working. Do I need to change the ram as well or can I keep the old ram. Currently I believe it comes with 4GB DDR3 SDRAM. Also can anyone tell me if I am using Windows 7 32 bit, what is the max ram I can install after upgrading my APU. And is this laptop comes with dedicated graphic card or integrated with the CPU? Thanks.

    hi jolax,
    Looking at this pdf data sheet, the Lenovo N586 can accommodate the following:
    Processor:
    AMD Comal Quad-core A8-4500M Processor
    AMD Comal Dual-core A6-4400M Processor
    Video Graphics:
    AMD RadeonTM HD 7640G Integrated graphic (built-in to the processor)
    Memory:
    Up to 16GB DDR3 – 1600/1333Mhz memory
    [2 SODIMM slots (1x2GB/2x2GB/1x4GB/1x2GB+1x4GB/2x4GB)]
    I recommend changing only the component that is specified on this data sheet as the motherboard's BIOS may not support other components that's not on the list.
    Regards
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Upgradation Guide for Weblogic Portal 4.0 to 8.1

    If we have to upgrade the Weblogic Portal 4.0 to 8.1, what is the best way of doing
    it?
    Shall we directly upgrade 4.0 to 8.1 or need to do 4.0 to 7.0 and then 7.0 to
    8.1?
    How successful it would be? Is there any forseen issues while upgradation?

    Hi, is there any update on the portal 4.0 to 8.1 migration path? Our team is faced
    with this same problem. Migrate through portal 7.0 or rebuild our portal app
    on 8.1
    "Mike" <[email protected]> wrote:
    It's been five months on this question. Come on.
    There are plenty of us out here looking at upgrading Portal 4.0. If we want to
    upgrade to 8.1, what is the best approach?
    Inquiring Minds Want To Know.
    "suganya" <[email protected]> wrote:
    If we have to upgrade the Weblogic Portal 4.0 to 8.1, what is the best way of
    doing it? Shall we directly upgrade 4.0 to 8.1 or need to do 4.0 to 7.0 and then
    7.0 to 8.1?
    How successful it would be? Is there any forseen issues while upgradation?

  • Does anyone have or know where I can purchase the 35mm slide guide for a canoscan model 4400F?

    I recently purchased a used canoscan 4400F and it did not come with the Slide Guide.   Does anyone know where I can purchase?
    Thanks in advance
    David
    New York

    I have used this site a couple of times:
    https://www.charger4u.co.uk
    Choose "Apple" and write "iBook G4". Relatively cheap prices and pretty fast delivery.
    It's replacement adapters.

  • ISA upgrade guide

    hi,
    does anyone have documents on upgrade guide for ISA 5.0 to 7.0? 
    Thanks
    Shanti

    There may not be one specific to ISA upgrade. But there is one for CRM Java components upgrade. Here is the upgrade document for [SAP CRM 7.0 SR1 Java Components|https://websmp103.sap-ag.de/~sapidb/011000358700000516902009E]. This link is for Windows OS and you should get one that is specific to your need from /instguides in the [Service Marketplace|http://service.sap.com/instguides].
    Note: You need access to Service Marketplace.
    Easwar Ram
    http://www.parxlns.com

  • Windows 7 Driver for VFO230

    Windows 7 driver for Creative Live! IM Pro model # VFO230 is needed. I can only find Windows Vista driver online at this time. I used this camera on windows vista service pack 2 but today got a newer computer with windows 7 operating system and would still like to use this camera. I could not locate a beta windows 7 driver for the VFO230 model either. If there is a compatible driver for Windows 7 that will work with camera model # VFO230 please let me know which one it is and where I can obtain it.
    Please and thank you.

    Hello Stoiko,
    Thanks for the post.  Depending on which model of HP LJ 1100 that you have, the drivers for Win7/64 can be located here:                                                                                                                                                                                             Good Luck!
    HP LJ 1100
    http://h20566.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=us&sp4ts.oid=14925
    HP LJ 1100 All-in-One
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=12006&spf_p.t...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • Windows 8 free upgrade tool for model VPCF226FM

    Hi everyone I used before to download the free upgrade tool from support website, where it helped me to uninstall incompitable drivers/tools/utilities and re-install them later after upgrading to Windows 8 I am not able to find that tool anymore and downloading/installing drivers one by one is not working fine. I have removed power management & Vaio control center and re-installed more than dozen time and still have same issue as unable to use FN keys to control brightness

     
    Hi athensguy, 
    Thank you for considering Sony Community! 
    I am not sure what specific application you used before but all drivers and software that is compatible with your machine are listed on eSupport website. If you are refereeing to the upgrade from Windows 7 to Windows 8, please visit this link: Windows® 8 Upgrade Instructions for VAIO® PCs 
    If your main issue is the function key (Fn), you may follow these steps to troubleshoot the laptop. 
    Power Cycle - Remove the battery and all peripherals -> press and hold the power button for 5 seconds
    Reset BIOS. 
    Got o Device Manager -> Keyboards -> right click Keyboard driver -> Uninstall (DO NOT DELETE) -> restart the laptop. The driver will be reinstalled.  
    Download or update all the drivers from eSupport website.  
    For further assistance, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
    Hope these help. 
    Thanks, 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • Where is the PC Tune-up guide for Windows 7?

    Hardware ForumJust curious. Everything in the FAQ dropdown menu in the front page of this forum section are dated 5 or 6 old. I know that some of the info is still valid, but is any of that going to be updated?  And is there a benchmarking site I can rely on for new builds? The PPBM site seems to have stopped operating.
    Anyway, I was looking for that tune-up guide for PCs running Premiere. I can't find it anywhere.

    I don't know if what I have is "that tune-up guide" for Win7 but I do have a bunch of saved links
    Windows Indexing is BAD http://forums.adobe.com/thread/676303
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    http://www.decrap.org/ remove bloatware
    http://support.microsoft.com/fixit/
    Record Steps http://blog.raxco.com/2012/05/18/windows-7-tool-records-your-pc-problems/
    Free System Optimizer http://www.iobit.com/advancedsystemcareper.html
    Registry Cleaners http://windowssecrets.com/newsletter/putting-registry-system-cleanup-apps-to-the-test/
    Be sure you have the default hard drive indexing OFF for all drives and folders!!!
    http://www.pcworld.com/businesscenter/article/220753/windows_7_godmode_tips_tricks_tweaks. html
    Temp/Cookie Cleaner http://www.mixesoft.com/
    http://forums.adobe.com/thread/789809
    Win7 Toolbar http://WindowsSecrets.com/comp/110210
    More Win7 Tips http://windowssecrets.com/comp/110127
    Utilities http://windowssecrets.com/comp/110106 (Startup Solutions)
    Win7 Help http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/
    Win7 Configuration Article http://windowssecrets.com:80/comp/100218
    Win7 Monitor http://windowssecrets.com:80/comp/100304
    Win7 Optimizing http://www.blackviper.com/Windows_7/servicecfg.htm
    Win7 Adobe Notes http://kb2.adobe.com/cps/508/cpsid_50853.html#tech
    Win7 Adobe Update Server Problem http://forums.adobe.com/thread/586346
    An Adobe Win7 FAQ http://forums.adobe.com/thread/511916
    More Win7 Tips/FAQ http://forums.adobe.com/thread/513640
    Processes http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx
    Compatibility http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx
    Win7 God Mode http://forums.adobe.com/thread/595255
    CS5 Install Error http://forums.adobe.com/thread/629281
    CS5 Help Problem http://kb2.adobe.com/cps/842/cpsid_84215.html
    Win7 and Firewire http://forums.adobe.com/thread/521842
    http://lifehacker.com/5634978/top-10-things-to-do-with-a-new-windows-7-system
    http://www.downloadsquad.com/2009/05/29/7-free-windows-7-tweaking-utilities/
    Win7 64bit Crashing and "a" fix http://forums.adobe.com/thread/580435
    http://prodesigntools.com/if-any-problems-downloading-or-installing-cs5.html
    Harm's Tools http://forums.adobe.com/thread/504907
    Also http://www.tune-up.com/products/tuneup-utilities/
    Also http://personal.inet.fi/business/toniarts/ecleane.htm
    Optimizing Hard Drive http://www.video2brain.com/en/videos-5353.htm
    -and http://forums.adobe.com/thread/1083797
    Win7 Reinstall http://windowssecrets.com/newsletter/win7s-no-reformat-nondestructive-reinstall/
    Anti-Malware Tools http://windowssecrets.com/newsletter/the-advanced-system-recover-toolkit/
    Repair AVI http://forums.adobe.com/thread/888268
    Tune Vista & Win7 64bit http://forums.adobe.com/thread/436139
    GPU Monitor http://www.techpowerup.com/downloads/2092/TechPowerUp_GPU-Z_v0.5.8.html
    http://windowssecrets.com/newsletter/clean-install-windows-7-from-the-upgrade-disc/
    Drive C space http://forums.adobe.com/thread/1007934?tstart=0

Maybe you are looking for

  • Performance problems to generate PDF files using CR

    Hi, I develop an application that read TXT files and uses this information to generate PDF files, but I'm having problems with performance to generate this PDF, each files are taking at least 1 minute to create the file. I realized that some TMP and

  • I have photos in photoshop that did not transfer

    I have photos in my photoshop that did not transfer to Adobe Revel.  What can I do about this?  I don't want to lose them!

  • Lost all my thumbnails - new tabs open only a blank page. How do I get them back?

    The support topic on this question says to look for a "pin" icon in the upper left corner of the browser. I do not show one. Firefox used to just automatically populate my new tabs page with the thumbnails, but it is no longer doing that, and I don't

  • XI & BI - /BIC field problem

    Hi, I am trying to push dat into BW from XI. everything is working well except for fields that are customized in BW that start with /bic and therefore are not papulated in the BW. does anyone have a solution?

  • IPv6 - No buffer space available

    Anyone else seen this IPv6 weirdness: 6to4 tunnel to Hurricane Electric. Mac Pro is the router and tunnel endpoint (gif0). ip Protocol 41 passed through various routers/firewalls, etc. sysctl'd ipv6 forwarding on and RA. statically assigned /64 eithe