Windows 7 using bootcamp on mid 2006 Mac Pro.

I just got the a copy of Duke Nukem: Forever, and my heart sank when I saw that it would only run on a windows machine. So using bootcamp, I created a partition of 100GB, and I went to install a genuine copy of Windows 7 on my mid 2006 Mac Pro running OSX 10.6.7 with everything fully updated. However when I went to install windows, it continally gives me an error. I followed the install guidelines on the bootcamp instillation guide, clicked "format" in the windows installer, and nothing happens. It just kicks out an error code and tells me that it cannot install to this location. I can't be the only one out there with this problem. Any help would be greatly appreciated! Here are the specs of my machine:
Mac Pro mid 2006
Two Dual Core 2.66 Intel Xenon processors
8GB RAM
over 1 TB of free space
Mac OSX 10.6.7
Windows 7 Home Premium (Genuine Copy)
error message displayed during windows instillation: "0x80300024"
Thanks for anyones assistance!

There are more than enough helpful links from Bing on the error message.
Issue with your Mac Pro is you need 64-bit to address more than 1.9GB / Windows 7 Pro to support dual processor.
The lack of EFI64 does make it impossible to install as is. Most common, people can't get beyond an error on startup "Select 1 or 2"
https://discussions.apple.com/thread/2372797?threadID=2372797&tstart=0
Also, you need to remove all drives other than the one you will install Windows to.

Similar Messages

How/Can I install WINDOWS 7 64BIT on a 1st Generation Mac Pro ?

Hi, Is it possible to install Windows 7 64 bit on a 1st Generation Mac Pro 2.66Ghz? Apple suggests that it's not possible and yet I've seen several Googled posts where the users have successfully installed 64 bit on a 1st Generation Mac Pro. The problem is that they've done this creating a bootable iso disk(whatever that is) using a Windows computer with imgburn and windows commands. I'm pretty good at following instructions but I haven't seen any instructions on how to install Windows 7 on this machine using a Mac based approach.
I'm using BootCamp and was able to partition the drive into NFTS and "proceed" with installation; however all te installations failed during setup and Windows would not boot; disk repair was not possible. Besides, from what I've gathered, 32 bit is problematic around memory issues.
When I try installing 64 bits, I never get past the "select cd rom 1or 2" message where the keyboard won't work. It is at this point where others say they have successfully proceeded with moving forward by creating a bootable iso disk.
Problem is it's all Windows based with exe files and presupposes I already have Windows running.
I'm not sure I really understand how to create an iso disk, but I do have ROXIO TOAST 10 which is capable of burning "ISO" disks.Does anyone know how to do this and/or can you point me to a place where there are instructions on how to proceed?? While I realize Apple says that some mid 2006 mac pros aren't supported, there are multiple posts of windows users successfully installing Windows 7 on a 1st Generation Mac Pro.
Thanks.

I have a March 2009 Mac Pro dual quad core running Win7 Pro 64 bit. I have Windows installed on a dedicated internal hard drive. There are no partitions, the entire drive is for Windows use.
Here's how I installed it, I did not start with BootCamp. Make sure the drive you're going to use for Windows doesn't have any important files on it because it will be formatted.
1. Update Snow Leopard
2. Place the Windows cd in the Super Drive
3. Shut down the computer
4. Remove all the hard drives except the one you want Windows installed on. Keep track of the order they are in and at the end replace them in the same order.
5. Boot the computer holding down the Option key
6. Boot to the Windows cd
7. Install Windows and format the drive to NTFS
8. When Windows needs to restart during installation you'll need to hold the Option key and boot to Windows, not the Windows cd.
9. After Windows installs, place your Snow Leopard disc in the Super Drive
10. The Drivers for Windows will be installed along with a Windows version of BootCamp.
11. Go to Start > All Programs > Apple Software Update
12. Update again until it's done.
13. You'll also find a BootCamp under Control Panel, check it out.
14. Shut down the computer and replace the hard drives in their original order
14. Now if you turn on the computer it will boot to Snow Leopard, but if you hold the Option key during boot you can select Windows or Mac.

How can I install Mac Mini drivers for Windows 7 32-bit if I didn't install Windows 7 using bootcamp?

Hello. I have a mac-mini (mid 2010) and with bootcamp, was successfully running XP.
I then decided to upgraded to Windows 7 had lots of trouble installing it on my existing bootcamp partition.
I finally was able to install Windows 7, by just booting off the CD and letting it install that way.
But reading more on it, I think I was supposed to use Bootcamp to do it for me...
I had thought the Bootcamp Assistant was for only fresh installs of a Windows O.S. where no partitiion existed previously.
I had a partition so thought Bootcamp wasn't required for my needs.
But now, inside Windows 7, I have 0 drivers installed. I have an AirPort Express, so on the Mac side, I downloaded
and installed the Windows version of AirPort Utility and copied it to my USB stick. Then
I exported my settings to a text file on a USB Stick, then on Windows was able to successfully install AirPort Utility and import the settings.
But it still doesn't find my network. I am pretty sure I'm broadcasting my SSID...
So I need to know the following:
1) How to know I'm broadcasting my SSID - where do I find this in settings?
2) How I can install my mac-mini drivers on Windows 7 so I can use my existing wireless network, now that I've gone through the installation without using Bootcamp?
3) Do I need to set up network adapters and all that stuff in Windows 7 first? If so, how and what drivers do I need?
One other thing I tried was downloading Bootccamp 4.x and installing that on Windows 7 to see if it gives me the drivers that were supposed to be written to my USB stick if I had installed Windows 7 using Bootcamp in the first place... However I think the message it said was that it couldn't install as it was the wrong version. So I'm still stuck without drivers and therefore no internet.
And that is my main task - getting the Internet up and running in Windows 7.
Other Info:
I'm running Mac OS X 10.6.8 with 2 GB of memory.
I installed the 32-bit version of Windows 7 and I don't know what version of Bootcamp I'm running...
I can tell you that BootCamp Assistant is v3.0.4, but don't know if that means Bootcamp is also 3.0.4.
Hope you can help.
Thanks.

I tried something that worked for me...
Knowing that after my install of Windows 7 wasn't the correct method (didn't go through bootcamp), and the BootCamp 4.x package wouldn't install under windows 7, I tried reinstalling Bootcamp 4.x in Windows 7 to see what the exact message was it gave me. The message said it couldn't install because of a 32-bit O.S. vs a 64-bit version of the package.
So that got me thinging - my XP version was 32-bit, and so is my Windows 7 installation. So I tried installing the bootcamp that came with my Mac OS X installation CD. This is bootcamp version 3.1.
Not only did it install, but it practically took care of everything driver-wise for me. I was then able to see my wireless network, enter my password and I was connected. The only thing else I had to do to get on the Internet was bring IE8 online (guess it ships offline by default). Firewall and Antivirus are now installed, just a few more things to go.
That's one thing that's just not clear that I'll be sure to note for next time... The Bootcamp packages you download are actually driver packages for Windows. That is where the Windows drivers exists that are necessary to make your Windows 7 PC work on a bootcamp partition!
I didn't need the AirPoirt Utility at all (at least, I never went into it).
Thanks VikingOSX for your post. I will not need to follow the steps you provided, but they may help someone else as all of these bootcamp issues I've been reading seem to be very unique per installation.
Hopefully my solution helps others.

HT4407 Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?

Hey, I am unable to install windows 7 using 'bootcamp 5.0' . I have already partitioned the drive as (mac Os Extended Journaled) and yet it seems bootcamp won't acknowledge this?
My first thoughts were that 'bootcamp' was out of date...needed an upgrade to register windows 7. Since then I am once again met with the same problem... how can it not see the I have already have a paritioned drived ready to be used for installition, is there a way to fix this problem? I don't really want to pay out for 'i-parition' only to merge my 2 drives back into one and start again from scratch =/. Seems silly to do so...what are my options?
Regards Swishi...p.s If anyone can help me...it'll make my day :3.

ONE PARTITION.
You don't need to buy anything but you should have backups.
you can delete #2 you created. Then resize to full drive.
There are already
GPT
EFI
Mac
Recovery
and there needs to be Windows which cannot be higher ID
Reading the instructions first and just swallow whatever pride or inidignation. It is a "my way or highwar" setup and utility,.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/

I want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?

i want to instal windows 7 using bootcamp on my mac book pro and how large do i have to make the partition if i want to use it for gaming?

"At least 16 GB of free space on the disk onto which you’re installing for 32-bit, or 20 GB for 64-bit (for Microsoft Windows and Windows-based applications)."
That's what Apple proposes in here Boot Camp: System requirements for Microsoft Windows
Personally I would double these amounts and add to that the diskspace needed for your Windows games.
Stefan

How to install windows 8 using bootcamp with no optical drive

Hi,
I have a mac book pro 17" late 2011 with Mountain Lion installed.
I have previously installed a windows 7 using bootcamp without an optical drive by creating an install disk as part of boot camp option.
I still don't have an optical drive.
The other day I removed my Windows 7 since I want to try Windows 8 but when I try using boot camp to install windows 8 it is asking for an optical drive and the option to create an install disk is not available anymore.
Any idea on this issue?
Thanks much

Windows 8: enable Hyper-V, it really helps.
http://www.gizmodo.com.au/2012/03/windows-8-on-a-macbook-air-beautiful-and-kinda -broken/
http://www.windows-now.com/blogs/robert/hyper-v-3-0-confirmed-for-windows-8-clie nt.aspx
http://www.windows8update.com/2011/12/06/enabling-hyper-v-in-windows-8/
http://huguesval.com/blog/2012/02/installing-windows-7-on-a-mac-without-superdri ve-with-virtualbox/
Disable Windows 8’s Adaptive Brightness to Fix Dark Screen Problems
http://www.howtogeek.com/107173/disable-windows-8s-adaptive-brightness-to-fix-da rk-screen-problems/
It should be straight forward and no different, except you are burning an ISO and that always needs to be done at slowest burn speed for any version of Windows.Otherwise it won't work (even if it manages to install it will fail on restart or some other point).
Windows 8 Release Preview
http://msdn.microsoft.com/en-us/windows/apps/default
https://blogs.msdn.com/b/b8/?Redirected=true

How to have two partitions in windows 7 using bootcamp?

Hello everybody,
I've just recently bought a new MacBook Pro, I'm not very familirar with Macintosh. I installed windows 7 using bootcamp but the problem is that I just can see one partition in which I've installed windows.
actually, I want to partition my 500GB disk to three different partitions as following:
1) 70GB for Mac
2) 80GB for Windows
3) 350GB for Data
so that I can have third partition both in Mac and Win.
I searched internet and I found a few documents about it and I followed the instructions but I had no luck of success. one of the instructions I tried is: http://davidseah.com/index-ee.php/wikilab/Creating-2-Windows-Partitions-with-Boo t-Camp/
Any suggestion would be appreciated.

1: Those instructions at the link are severely outdated. Don't use them.
2: Apple expects users to have one Bootcamp partition, one OS X Lion partition and that's it and that's all they are going to hold your hand on.
(note: there is also a hidden EFI and a Lion Recovery Partition also on the drive.)
Anything beyond that is getting into major geek terror-tory.
Of course it's possible, I had my 15" with 7 partitions and booting 4 other operating systems from Lion, Snow, Windows, Linux (with a Linux Swap and a exFAT data). But I had to wipe the entire drive, set up the partitions install a alternate EFI boot program (a program that resides in firrmware) and then install each OS in each partition.
Since your new to Mac, you should really hold onto Apple's hand and use either a external drive formatted either FAT32(MSDOS) for under 4 GB files sizes (preferred) or exFAT for over 4GB files (not preferred but necessary) in Apple's Disk Utility.
Windows is as you know, formatted NTFS and OS X is formatted HFS+ Journaled as their partition data formats.
There is software for Windows called MacDrive which will read and write HFS format, and there is software from Tuxera that will allow OS X to read NTFS format.
There is a security issue allowing Windows to read HFS, but that should do transferring the small amount of files your going to be using in both operating systems.
OS X, like Windows, is going to expect files to be in each respective User folders of Music, Pictures and so forth when you open save dialog boxes, open finder windows, open certain programs and so forth. So ideally it's not best to share a partition or really have the user data on another partition at all.
I know it's a practice on Windows machines to partition data away from boot/programs to reduce defragmentation, on OS X it's not as necessary (except in special cases) as all 2GB sized files and below are written to one space on the drive (if there is room of course)
Windows 7 still needs to be defragged, however it can be schedualed and you can watch the progress. If you install WIndows, perform all the updates, then install programs, then finally any files you do keep there, it should stay optimized for a quite awhile. Ditton on the OS X side.
If your going to sharing a grreat quantity of files between the two OS's, use a external drive.
Apple installs a hybrid MBR in the Bootcamp partition for Windows to use to interact with the GUID partition table (GPT) it uses.

Installing Windows 7 using bootcamp help

Hi all,
I am planning to install windows 7 using bootcamp to play PC games only, as love mac software for everything else, and want to make sure that all will run smoothly before i buy the required stuff.
I am running OSX 10.8.5 on my iMac, which has a wireless keyboard, wireless trackpad, and wireless mouse, and a connected external superdireve (for CD's and disks, sorry to patronise just wanting to be clear ) and wanted to know if i can install windows using a disk that i buy in a normal pack, as i have heard that the external drives can have problems?
All advice much appreciated!

this will install as normal. before installing however you will need an activation key cos in win 7 this is one of the first pages that is presented before instalation.
the key from your relative could possibly work especially if he used your internet connection to register. but this could cause problems with his/your authenticity after 30 days.
the only other option is to purchase a key.
you say a 30 day trial, does it give you a temporary key for this?

MacBook Pro 15 inch 2011- Blue tint in Windows 7 using Bootcamp 4.0

I have recently installed Windows 7 using Bootcamp on my Macbook pro 15 inch 2011. The display under Mac OSX is accurate with vibrant colors using the default Color LCD profile. In WIndows 7, everything is tinted blue and all colors are dimished because of this. I have tried importing my Color LCD icc profile from Mac OSX Lion and this has helped to some degree. This alleviates the blue tint but gives Windows a warmer, browner tint. Unfortunately this makes the display too dim and crushes the blacks. Additionally, some games revert to the default windows calibration with the blue tint. Games look bad either way as the Color LCD profile in Windows makes the game too dark and the default calibration makes everything blue. Has anyone been able to correct this in Bootcamp?Thanks

msconfig / chkdsk / Windows 7 DVD system repair or rollback restore point
Ccleaner 3.09 - remove temp files and caches / also run Registry section
Start: Run %TEMP% (select all) and remove all the contents in there
Heat, fans, poor Apple drivers, I would not blame ATI but I would upgrade/install those.
And yes BC 4.0 probably was not tested fully.

Bluetooth Mighty Mouse & Windows XP using Bootcamp

Are there plans to add functionality for the bluetooth mighty mouse in Windows XP using bootcamp??
Macbook Pro Mac OS X (10.4.7) I run Bootcamp, as well as OS X

I was able to get it to work in Windows XP. I was not using Boot Camp since I have a IBM ThinkPad T41p, but it should work the same.
See my How to Setup Wireless Mighty Mouse with Windows XP post.
Power Mac G5 Dual 2 GHz Mac OS X (10.4.7)

BSOD in Windows XP using bootcamp

i bought a 24" imac back in november and successfully installed windows xp using bootcamp 2.0 at that time. Windows XP ran great everyday (no problems) until about 2 weeks ago when I starting getting the blue screen of death (BSOD). This was occurring with Bootcamp 2.0 and Windows XP SP3.
I went back to the MAC OS side and deleted the windows partition, then recreated the windows partition ... then reinstalled Windows XP (with SP2) ... then updated the Bootcamp app on Windows XP to version 2.1 (according to the documentation this is necesary BEFORE installing windows SP3) ... then i installed SP3 and all windows security patches.
The computer will boot into Windows XP fine but will only run for about 15 to 20 minutes before giving me the BSOD ... The Stop Error on the Blue Screen is 0x0000007F (0x0000000D) ... I have no idea why this started 2 weeks ago.
According to the documentation this error relates to corrupt RAM, mismatched memory modules, or a malfunctioning motherboard ... or could occur if the system is trying to overclock the speed of the processor.
Is this a hardware problem with my iMAC? or is it a bug in bootcamp?
I have no idea what to try next.
Is anyone else having this or similar problems? If anyone can help me solve this they are a saint.

so far so good. after uninstalling Norton Internet Security 2008, Windows XP has been running for over 40 minutes with no blue screen of death crashes
you are a godsend crazy Irving
The Windows stop error was REALLY MISLEADING making me think it was some sort of hardware (memory or motherboard) problem
Thanks again for taking the time to respond.

Grow Windows Partition using BootCamp or 3rd party application

Hi,
My client is using a MacBook Pro with Mac OS X Leopard and Windows Vista 32 bit. The client uses Windows most of the time.
My question is, can I grow the Windows Partition using BootCamp or a 3rd party app without having to reinstall Windows?

Hi,
best way to enlarge the BootCamp partition is the useage of WinClone http://twocanoes.com/winclone/ which also is a great backup app for BootCamp Windows.
Here are the step-by-step instructions on how-to do this: http://www.twocanoes.com/forums/viewtopic.php?t=515 (Under *My current Windows partition is the wrong size, and I want to make it larger. How do I do this?* )
Other applications which claim that hey can resize BootCamp Windows partitions are iPartition and Drive Genius, but I never have used them.
Regards
Stefan

I can't get 5.1 Surround Sound running Windows 7, Mid-2010 Mac Pro

Hello,
So I'm running bootcamp on my Mid-2010 Mac Pro and I can't get Dolby Surround Sound to run from the Realtek HD Audio Manager. Is there a way to produce true Dolby 5.1? I understand this may be more bootcamp related than to the actual hardware itself but I figured this is the best place to start troubleshooting this.
Thanks

I can try-dunno how much help I'll be, though
go here for Realtek drivers for surround sound
http://www.realtek.com.tw/products/productsView.aspx?Langid=1&PFid=37&Level=5&Co nn=4&ProdID=144
try this: go to Windows Sound, then playback devices, then click on speakers icon (should have realtek as default). Click on that, and click configure
if realtek has a sound manager, try clicking on that, and a config dialog might appear
sorry can't be much more help than that
JB

Bootcamp and Windows 7 and 8 on the new Mac Pro (Dec 2013)

I want to install bootcamp on my new Mac Pro (Dec 2013).
Bootcamp says it supports Windows 7 and 8, but there is a bunch of new hardware with the new Mac Pro, so I am concerned about bootcamp support for it.
Are there any issues with Windows 7 Pro install? How about Windows 8 Pro?

From what I see, only Windows 8 is supported on the new Mac Pro (Late 2013) with Bootcamp.
See Boot Camp: System requirements for Microsoft Windows operating systems
Look under Boot Camp requirements by Mac model
Mac Pro
Mac model
Windows 8, 64-bit
Windows 7, 64-bit
Windows 7, 32-bit
Windows Vista, 64-bit
Windows Vista, 32-bit
Windows XP, 32-bit
Mac Pro (Late 2013)
BCA
"BCA" indicates that Boot Camp drivers are automatically downloaded as part of the Boot Camp Assistant in OS X, for 2013 or later models of Mac computers.

HT4407 When installing Windows 7 using Bootcamp, I get message: "Need 64-bit Windows Installation USB drive or DVD." I thought my install disk was for 32 or 64 bit. What does this mean?

When Installing Windows 7 using Bootcamp, I get message: "Need 64 bit Windows installation USB drive or DVD." What does this mean?

It means you need the 64 bit Version of Windows on a USB stick or DVD.

Windows 7 using bootcamp on mid 2006 Mac Pro.

Similar Messages

Maybe you are looking for