Windows 7 VM Network Browse shows duplicate name for DC

We have several Windows 7 VMs running on a Hyper-V server and recently a couple of them have started having problems whereby they can't map a drive to the File Server (SV001) when the user logs on.
If I browse the network from both machines I can see two entries for the DC/file Server, one in capitals and one in lower case i.e. SV001 and sv001.
I've checked DHCP, DNS and AD and can only ever see one entry and can't figure out why?
The only way to resolve the problem is to restart the Workstation service but after a few hours the problems re-appears
Any ideas?
Cheers for now
Russell

Hi,
Is there any error message when you tried to map drive on the problematic VMs?
If they just lost connections with mapped drive, you can try this fix:
Mapped Drive Connection to Network Share May Be Lost
http://support.microsoft.com/kb/297684/en-us
For further research, please upload the event log (System) of the problematic VMs.
How to Save Event Logs
http://msdn.microsoft.com/en-us/library/gg163107.aspx
Keep post.
Kate Li
TechNet Community Support

Similar Messages

After "Configure Feature", "Changed By" field shows my name for most of work items

I recently upgraded TFS from 2010 to 2012. And I am running "Configure Feature" for every project. The configuration ran successfully. However, when I run a query, the "Changed By" field shows my name for most of work items. I thought
configuration should never touch the data. More interesting, I go to history of work items, there is no change by me at all. Now why did history and query show totally different data?
Thanks.

Hi Jason,
You can create a new work item to have a check if the same issue occurrs. To configure features, you can refer to the links below to see if you configured correctly:
https://msdn.microsoft.com/en-us/library/ff432837(v=vs.110).aspx
http://blogs.msdn.com/b/visualstudioalm/archive/2012/05/09/how-to-configure-features-for-dozens-of-team-projects.aspx
Please elaborate more details about the configuration feature steps if the issue persists. You can also run TFS best practice analyzer to see if there configuration issues.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have taken over 9999 pictures with my phone and it is now creating duplicate names for the pictures starting back at 0001 making it difficult to manually upload my photos like i always have. How do i fix this?

I have taken over 9999 pictures with my phone and it is now creating duplicate names for the pictures starting back at 0001 making it difficult to manually upload my photos like i always have. How do i fix this?
(I tried to just write this as a reply to someone who had already asked the question whos problem was magically solved after posting the question and the site was not allowing me to post to it so here I am)

Additionally, when I try to sort the photos by date to easily extract the newest photos which I have not yet uploaded, it is unable to put them in correct order regardless of the fact that the date is correct. Only the videos end up in chronological order for some reason while the photos stay in order by name.

Ipad still showing duplicate entries for songs.

my Ipad still showing duplicate entries for songs. I have unchecked Show Itunes in the Cloud purchases, I have tried replacing all items when autofilling (before syncing) I have even logged out then back into itunes, to no avail. Can you please assist? Thank you

hi guys, i was just googling the problem as i too have it, i am currently trying to sort it, i have deleted all my music off my phone using itunes and then put it all back on and also tried deleting it and outting 1 album on at a time, still not got rid of the duplicate tracks, i have now used the show duplicate items view and deleted those off my itunes library. i think i may have come across the problem!! i have just deleted all my music off my iphone using itunes again, and it shows nothing being on my iphone, however, if i go into music on my actual phone it is still showing 126 songs and none of them play. so i have now deleted them manually directly from the phone and am now putting all my music back onto my phone hoping i have cured the issue of ghost tracks.
ill let you know when its done if we are cured!!
BOOOOOMMMM!!!!! it worked!!! been so frustating, now its all good, hope this helps anyone with the same issues

Bonjour Browser shows identical IP for every mDNS devices

according to Bonjour Browser,
my AEBS' IP is 61.78.35.195
my Airport Express' IP is the same,
and my network printer shows the same IP.
I cannot connect to any devices by the mDNS name like powerbook.local, etc.
they are all in 192.168.x.x network, there's no reason 61.78.something should show up.
Is there any way to solve this problem?

power cycle your router and all the devices on the local network.

After Alcatel OS update from v1.0.1 to v1.1.0.0, the phone doesn`t show phonebook names for incoming/missing calls!

Hi! I have very unpleasant problem with my phones after legal OS update! After Alcatel OT Fire OS update from v1.0.1 to v1.1.0.0, the phone stops to show contacts names and pics for incoming calls and names for missing calls from phonebook. Before update, everything worked just fine! People from Telenor Serbia obviously hadn`t solution for this problem. They send me a request to send them a phones (yes two phones with same problem), but I got a phones back with unsolved problem! Also in the datas about phone, OS, e.t.c, the phone number doesn`t exist any more, just blank field. If means something, the phones are with different hardware revisions, 11 and 12! Any solution for this problem?! Thanks!

Hello,
After reading the information provided about your issue I suggest a soft reset of the phone.
#Take the back cover of the phone off.
#Take the battery out.
#Take the SIM card and microSD card out (if applicable).
#Wait 10 seconds.
#Put the SIM card and microSD card back in (if applicable).
#Put the battery back in.
#Put the back cover back on.
#Turn the device on.
#Check if the issue you were having is still present.
Please report back to us if this solved your problem!
Thank you

Capacity leveling log showing duplicate information for Resource

Friends,
Need one help.
When I am looking into the Capacity leveling logs, I see duplicate information for every Resource. There is no difference in the information regarding resource utilization (before/after). For every resource we are getting this duplicate records in the logs. Sometime there is one difference on timing, (when the resource was processed by the background job.)
Text . Details . Current Date . Time
Resource W10_U0JA_001
Parameters
Resource utilization
Resource W10_U0JA_001
Parameters
Resource utilization
There is no difference in details resource utilization, yet resource are shown two times, for every resource.
We are on SCM 7.0 . Is this standard? if so, then why?
Can you please share your opinion/thoughts. Thanks a ton.
Satyajit

Hi Satyajit,
This can happen because of resource setting in APO.
You need to check the following:
Bucket definition
Resource utilization
Time Zone
You should check also the "Time-Cont Capacity" tab details where start, end and break time is maintained,
You should also verify the "External Capacity" Tab data
There is no other reason apart from that.
You can also check the PPMs which are using this resource and some setting in PPM modes and other operation data.
If it is okay then possibility you need to check the model and version assignments.
You can remove the version assignment and delete the resource and again CIF it to APO.
Possibly it will help.
Regards,
Vishal

Windows 7 mapped network drive. shows as disconnected, cannot remove, not showing in registry

a mapped drive shows as disconnected but still work in terms of getting into the shared network folder on our NAS. but i want to remove it. the commapnt prompt command wont do it. you cant disconnected it because it doesnt see a networked
drive. and i looked in the registry and there isnt a registry entry for the mapped drive. in the mountpoint2 or whatever.

To troubleshoot, disconnect the connection first. Please refer to:
How To Disconnect Non-Mapped UNC Path “Drives” in Windows
http://www.howtogeek.com/howto/16196/how-to-disconnect-non-mapped-unc-path-drives-in-windows/
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Windows 8.1 do not show DISCONNECT option for VPN, why? bug? Please fix!!!

I created a VPN connection. Once I connected to the VPN in Windows 8.1, it does not show DISCONNECT option when I click on the VPN again. It just keep showing CONNECT option only. Why? This has to be a bug! Please fix!

Hi Dan5678,
Is the connection an incoming VPN connection?
If yes, then you may take a look at the KB article below:
How to disconnect an incoming VPN connection in Windows 8 and in Windows Server 2012
To disconnect an incoming VPN connection, follow these steps:
Open Network Connections. To do this, use either of the following methods:
Swipe in from the right edge of the screen, or point to the lower-right corner of the screen, and then click Search. Then, type ncpa.cpl, and then click the Ncpa.cpl icon.
Press Win+R to open the Run window, type ncpa.cpl, and then click
OK.
Right-click the incoming VPN connection that you want to disconnect, and then click
Status.
On the General tab, click Disconnect.
Close Network Connections.
Hope this may be helpful.
Regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Can not select a PDF file in the file uploader window after clicking the Browse... button for a file type input element.

After upgrading to 5 (this worked in 4) I can not select a PDF file in the File Upload dialog that appears when I click the Browse button next to an HTML file type input element. The specific HTML element source code has the attribute: ACCEPT="image/*". I can select image files such as jpg, png, tiff, etc. But not PDF. This worked great in Furefox 4 and works in the latest version of Safari.
The HTML code for the form element is:
INPUT TYPE="file" NAME="file_1" ACCEPT="image/*" SIZE=35
The File Upload dialog lists all files with PDF extension as dimmed and not selectable in Firefox 5.
Can you help?

Hi Purush
Unfortunately we couldn't solve the problem. Our IT specialist checked it with SAP directly. SAP doesn't support the SAP KW solution anymore. Therefore we checked-in the document in ".doc"-Format.

Windows Login Screen doesn't show "eye" symbol for Password Reveal and right arrow (Enter)

When logging in to Windows 8.1 the eye symbol and right arrow symbol have been displayed until (I guess so) after an automatic Windows Update . As I was planning to migrate to Windows 10 I didn't invest much investigation into this problem. Now, after successful migration to Windows 10 Home the problem still exists. After typing the password I can't verify it because the eye symbol is still missing and for entering I have to press "Enter" due to the missing clickable right arrow. All this happens with a Microsoft online Account. I established a local account and with this, the eye symbol but not the right arrow reappeared. Many thanks for helping.

Hi there
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel. I understand that you wish to enable the reveal password icon for your system. I am happy to help. It really depends on which version of the Operating system you are running, because this sort of thing is normally controlled using the Group Policy Editor. That tool is not a part of a Home edition, you would need the Pro version or higher to have that. Assuming that you do have a pro edition or higher, then these may be of help to you:5 Ways to Access Local Group Policy Editor on Windows 10 - isunshare.comDisable or Enable the new Password Reveal Button feature in Windows 8 - windowsclub.com Unfortunately the version of Windows 10 I have installed beside me is the home edition as well, so I cannot access this, to verify, so let me know if that works for you.

My phone does not show contact names for country and area code while having in coming calls. Although, I have endorsed the name with numbers. How do I the problem. My one is a iphone 3s device with updated os. Please text to help

My iphone does not recognize saved contact number while having incoming calls due to country and area code as auto prefix. How do i fix the problem. How do i ensure that the phone recognize calls with and without the country and area code. Please text to help.

1) Open the Phone and dial *228. This is a Verizon over-the-air programming number.
2) When the system answer press 1 for "Program or activate your phone"
3) Wait for the call to disconnect. You should get a prompt stating something like, "Settings updated."
4) Open the Task Manager and kill the Phone, Message, and Contacts Applications
5) Wait a few minutes (I waited 3 just to be extra safe)
6) Open the Message App to verify the fix

Duplicate names..sql help?

Hi,
I am facing s problem hope you would help
I am running a query that shows me name of employees from a table with their
employee_ids
select emp_id, emp_name from t
EMP_ID     EMP_NAME
1820       Waugh
1920       King
1936       Ric
1940       Taylor
2036       Smith
2123       Paul
2157       ALi
2181       Smith
2189       Joe
2332       Bichel
2333       Usman I want that if there are more than ONE same EMP_NAMES returned by the query,
then query should not show the emp_name but instead should show 'duplicate
name' for matching names
so in my above data the name SMITH has come twice
so my desired output is
EMP_ID     EMP_NAME
1820       Waugh
1920       King
1936       Ric
1940       Taylor
2036       DUPLICATE NAME
2123       Paul
2157       ALi
2181       DUPLICATE NAME
2189       Joe
2332       Bichel
2333       Usman hope this will clear my requirement, I need the fastest and shortest possible
query to achieve this
CREATE TABLE T
(EMP_ID NUMBER(4),
EMP_NAME VARCHAR2(25))
INSERT INTO T VALUES (1820,'Waugh');
INSERT INTO T VALUES (1920,'King');
INSERT INTO T VALUES (1936,'Ric');
INSERT INTO T VALUES (1940,'Taylor');
INSERT INTO T VALUES (2036,'Smith');
INSERT INTO T VALUES (2123,'Paul');
INSERT INTO T VALUES (2157,'ALi');
INSERT INTO T VALUES (2181,'Smith');
INSERT INTO T VALUES (2189,'Joe');
INSERT INTO T VALUES (2332,'Bichel');
INSERT INTO T VALUES (2333,'Usman');
regards,

SQL> select emp_id
2        ,decode((select count(*)
3                from   t t2
4                where t2.emp_name = t1.emp_name)
5               ,1, t1.emp_name
6               ,0, '(name not found)'
7               ,'DUPLICATE NAME'
8               ) empname
9 from t t1;
              EMP_ID EMPNAME
                1820 Waugh
                1920 King
                1936 Ric
                1940 Taylor
                2036 DUPLICATE NAME
                2123 Paul
                2157 ALi
                2181 DUPLICATE NAME
                2189 Joe
                2332 Bichel
                2333 Usman
11 rows selected.

Solution: Can't See Windows PC's via Tiger 10.4.2 Network Browser

Please see this post, I could not reply with the solution to this post because it was archived.
http://discussions.apple.com/message.jspa?messageID=725372#725372
Here's the solution:
In Directory Access v1.2, You MUST capitalize the first letter of the Workgroup name, and ONLY the first letter.
Here's why:
In the version of Directory Access provided with Panther (v1.1.4) when setting the workgroup name in directory access, if you change the name from the default "WORKGROUP", it is acceptable to user all upper case; in my system it was "NETWORK".
After upgrading to Tiger, Windows network connectivity stopped working; we could not "see" Windows PC's via the Tiger Network Browser. We struggled for months with this issue.
It turns out that Directory Access is upgraded to version 1.2 when upgrading to Tiger. Once the upgrade to Tiger is complete, if you check the Directory Access App, the Workgroup name is carried over exactly as it was entered; again in my case NETWORK.
I have found that Directory Access 1.2 will accept all UPPER CASE or all lower case letters for a workgroup name, but if all upper case letters or lower case letters are used, you will NOT be able to view the Workgroup via the Finder's Network Browser.
Acceptable:
Workgroup
Network
Mshome
NOT ACCEPTABLE
WORKGROUP
NETWORK
workgroup
network
mshome
etc
Interestingly, in Directory Access 1.2, if your Workgroup name was carried over from a prior version, or if you simply entered the name after install or upgrade as lower case or UPPER CASE, Directory access will "add" the correct name in the drop-down list below the incorrect entry. Simply click the drop down list, select the Workgroup name with the proper capitalization and the ability to see Widows PC's via the Finder's Network Browser is fixed.
I've reported this to Apple Engineers.
Hope this helps someone.
Peter

i've got almost the same problem, the only difference is that when i try to go to my mac mini via IP, is the only way that windows can see the mac (on my case) and all the time sais that the Desktop folder was removed from the original place, that happens everytime that i copy or cut some file...ohhh and when i try to connect from the mac mini to the PC it sais that the alias could not be fixed and if i wanna fixit...doesn't do much really, and when i try to connect from the g4 to mini sais that the connection was failed because it took to much time and for the g4 to work again i've got to relaunch the finder. I'm under a Dlink router.
Please help.
PD: the versions of the OS's are:
Phanter: 10.3.9
Tiger: 10.4.5
PC: Windows XP

Windows Server 2008 doesn't show install date

Windows Server 2008 doesn't show install date for applications and update.<br /><br />It only shows "Unspecified", at the very top.<img alt="" src="http://social.technet.microsoft.com/Forums/getfile/286394"
/><img alt="" src="http://social.technet.microsoft.com/Forums/getfile/286395" />

In Programs and Features, you can have more options by right click on the tabbed window showing Name, Publisher and Installed on. May be you can check that once otherwise try to reinstall the features using Turn Windows features on /off.

Windows 7 VM Network Browse shows duplicate name for DC

Similar Messages

Maybe you are looking for