Windows 7 wireless connection to HP Deskjet 6980

My deskjet 6980 printer has been working flawlessly with Vista for many years.  Since I recently changed to a laptop with Windows 7 64bit I have not been able to connect wirelessly.  I have tried downloading the latest software and installing the printer through Windows but have had not success with either.  I have also tried connecting the printer through a router and through it's own built-in wireless connection.
Is there any way to connect this printer wirelessly to a Windows 7 machine?  Are HP going to introduce software for this in the future?
Any help would be much appreciated as not being able to print is a huge inconvenience!
Thanks for your time
Matt

I finally got my deskjet 6980 working on wireless network on Windows 7 64 bit.
Follow the following instructions Exactly! :
1)      Go Here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&taskId=115&prodS...
2)      Scroll down to "Network Setup" and click on : HP Deskjet 6840 and 6980 Printer series, and Officejet Pro K550dtwn Printer - Installing the Product...
Suggestion based on my experience:
- Follow the instructions closely. 
- I found a couple of steps to be different than indicated in the above links.. those steps were:
a) Under Step 1 of Wireless Setup Only: "press the network butoon to print the product information" , but actually you gotta press the Report Page Button on the printer (one with image of sheet with a check mark) to printe the product info.
b) Step 5 of Wireless Setup Only describes setup using advanced options, I just used the available Network Setup Wizard instead
c) Step 7 and Step 8 of Wireless Setup Only ask you to "Disconnect Ethernet cable from the printer and t\print a test page using microsoft word..", but once i disconnected the ethernet cable the printer couldn't connect to the network wirelessly.  So, I had to restart the Printer, Router and Modem before the printer could connect to the wireless network.  Also, once the printer connects wirelessly to the network you may need to add the wireless Printer to your computer (i.e. Go to Start - Devices & Printers: right-click and delete existing Deskjet 6980 printer cuz that one is probably for wired network.  Then click on 'Add Printer' - select 'Wireless Printer' - select HP Deskjet 6980 from the list generated of all wireless printers available and ADD it and make it default printer.
Good luck !

Similar Messages

  • Windows 7 ultimate wireless connection to hp deskjet 6988 working except no printing both sides

    I have new computer with windows 7 ultimate.  I have HP Deskjet 6988 printer with wireless connectivity.  I can print but cannot print double sided documents except by doing so manually.  Any solution?

    Hi Onemangosta,
    I would like to help with the garbled text you are experiencing. I have found a great document for you to use and I can also help you with the firmware update.
    Troubleshoot text that might be gibberish, nonsense, or look garbled or scrambled
    In order to update the firmware on your printer ensure the printer is on the wireless network and touch the Web Services icon (this icon is the 1st of the 4 that run across the top of the front panel - looks like 2 little cell phones). Scroll through the Web Services menu, find and select Product Updates, select Check for Product Updates.
    If the printer is already up to date the front panel will say so, if it is not, the download and install will begin. It is possible you were unable to do the update form the computer because the printer does not need an update. The HP Device Updater will only see a printer that requires the update.
    Hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Printing wirelessly with a hp deskjet 6980

    I bought me a hp deskjet 6980 which is equiped with it's own wi-fi device for printing.
    Has anybody experiences setting up the printer for wirelessly printing on Mac OS X 10.4.6 or Windows XP SP 2?
    Cause I followed the guidelines in the manual but never succeded.
    I have a wireless airport network for internet with a PowerBook G4 and a Vaio Laptop. What I want to do is sending printjobs from both machines wirelessly to the printer.

    Here are the instructions that got me through this.
    Good luck.
    For your issues with setting up the Deskjet 6980 printer to your network
    I would recommend the following steps. These steps are based on a
    process you would use if the driver installation has already been run
    through on the Mac.
    If you want to utilize the printers wireless functions disconnect the
    ethernet cable from the printer and the air port.
    Reset the printer buy holding the report (check mark) button down.
    While holding the report (check mark) button down press and release the
    cancel (x) button three times then release the report (check mark)
    button. Once all the lights except the power are off turn the power off
    (this may take a minute). Wait for one minute then turn the printer
    back on. While the lights are flashing follow the steps numbered below.
    1. Ensure the blue radio light come on the printer then click on the
    airport icon (on the top menu bar), select hpsetup
    2. Once connected to hpsetup, Print the network configuration page from
    the printer again (press and release the button with the check mark).
    3. Open Safari (should say cannot open page), enter the printer's IP
    Address (line 7 with the periods) into the address bar, hit return. An
    HP site should open (this is the embedded web server on the printer).
    * NOTE * If you do not have the printers report page with the IP address
    on it simply press and release the report (check mark) button and it
    will print out.
    4. Select the Networking tab. On the left side of the window (under
    CONNECTIONS), select Wireless (802.11)
    5. Click on Start Wizard.
    6. Select the network name from the drop down list, click next.
    7. If there is NO WEP encryption, continue to step 8. If there is WEP
    encryption, enter the key (You must know this key. If you do not contact
    Apple to get it reset).
    8. Click Finish, the printer's wireless and network lights should blink.
    9. At the top of the screen click on the word Safari and then click quit
    Safari. Once Safari closes click on the airport icon and switch back to
    your network name. You may be prompted for a password.
    10. At the top of the screen click on GO then APPLICATIONS. Next double
    click on TextEdit. type any thing in this windows and then click on
    FILE then PRINT. Ensure the Deskjet 6900 series is the printer listed
    and then click on PRINT.
    The printer should print the TextEdit words you typed in.
    Macbook Pro   Mac OS X (10.4.6)  

  • Windows 8 won't wirelessly connect to HP deskjet F2480

    I have a new HP laptop with windows 8 and I tried setting up my HP Deskjet F2480 printer by connecting the usb cable.
    The printer does show up under 'Devices' but shows it as being offline. Whenever I try printing something I just get a 'failed' message.
    I know that the printer does work wirelessly as my previous laptop worked ok. I have checked that 'sharing' is on.
    I have tried downloading up to date Windows drivers but no luck.
    Can anyone help please?
    This question was solved.
    View Solution.

    Glad your are printing.  Let me know if I can do anything else to help you.  Have a good day?
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input ! ___________________________________ _____
    Thank You,
    Rich
    Expert

  • Windows 8 wireless connection help

    I have just bought a new windows 8 system (HP 2000) and I am having problems connecting to my home wi-fi. This PC and all others that are using this network have a security of Shared and a WEP encryption. this new pc has no Shared option. No other options
    work to connect.
    Thanks.

    I would like to suggest the following:
    Please check if the computer can connect to other wireless network or try other encryption methods such as WPA2.
    Check if other Windows 8 computer can access the wireless network.
    Update the wireless network adapter.
    In addition, please check the issue referring to the following documents:
    Wired and wireless network problems
    Nicholas -  Your answer doesn't address the issue that WEP doesn't appear to be supported in Windows 8.  Yes, we know WEP isn't terribly secure, and we should really be using WPA2.  However, if you are not the network administrator or are
    unable to change the security due a legacy device which doesn't support WPA, one would think Windows 8 would retain compatibility.
    What HilowB52 is requesting, and what I would like to know as well, is a work around to enable a Windows 8 PC to connect via wireless using WEP encryption.  
    Best Regards,
    Ja[H]x

  • Windows 10 Wireless Connection Issue

    I recently upgraded to Windows 10 because I heard it would be fantastic but after the upgrade I could not connect to a wireless router. The router in my home is working fine and connects to other computers in the house as it always has but the upgrade to Windows 10 has completely stopped my ability to connect to wireless internet with this computer. With an ethernet cable I can still use the internet but that is useless because then it basically just becomes a desktop if I always need it plugged in to do everything. My laptop is only a few months old and ran like a charm before the upgrade to Windows 10. I tried to install updates for it while it was plugged into an ethernet but it did nothing. I have searched online to see if there is an update to my laptop that will fix this but nothing has helped. This also happened to a friend who has a Toshiba Satellite. I would post to Microsoft's website since this is obviously a problem with Windows 10 but I have tried to use the Microsoft forums in the past and I always get answers that walk me in circles. The HP Forums have always given me quality answers that actually helped me so I figured I would post here and hope for the best. Thank you to anyone who can help me.  Computer Specs:HP Envy 17t LaptopIntel i7-5500U Processor12GB DDR3L System Memory1TB 5400RPM Hard DriveNvidia GeForce 840M 2GB Graphics CardIntel 802.11ac WLAN and Bluetooth [2x2]

    See this post close to the top of this forum board:
    http://forums.xfinity.com/t5/Security-and-Anti-Virus/Norton-Popup-re-Latest-Version-for-Win-10-Compatibility/m-p/2574395#U2574395

  • Windows mobile wireless connectivity issues

    Hi all,
    In our wireless network , windows mobiles 8.0 are not able to connect . The SSID is using WPA2/AES encryption with 802.1x auth. The remaining clients are able to connect to the network and working fine. Even from windows phone 8.1 , I am able to connect to the network. The only difference I am seeing between these two mobiles are supplicant. In WP 8.1 i am able to choose the PEAP/MSCHAPv2 with no server validation options.
    In WP 8.0 , it is directly asking for UN/PWD.the WLC is 2504 with 7.2.103.0 code.
    The debug is below for 8.0 mobile
    isco Controller) >*apfReceiveTask: Jun 11 12:01:51.076: ec:f3:5b:13:fe:5c Deleting mobile on AP 1c:e6:c7:84:7a:20(0)
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Adding mobile on LWAPP AP 1c:e6:c7:85:25:b0(0)
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Association received from mobile on AP 1c:e6:c7:85:25:b0
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1697)
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1864)
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Applying site-specific Local Bridging override for station ec:f3:5b:13:fe:5c - vapId 3, site 'default-group', interface 'corp_byod'
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Applying Local Bridging Interface Policy for station ec:f3:5b:13:fe:5c - vlan 252, interface id 14, interface 'corp_byod'
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c STA - rates (8): 130 132 139 12 18 150 24 36 0 0 0 0 0 0 0 0
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c extSuppRates  statusCode is 0 and gotExtSuppRatesElement is 1
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Processing RSN IE type 48, length 20 for mobile ec:f3:5b:13:fe:5c
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Received RSN IE with 0 PMKIDs from mobile ec:f3:5b:13:fe:5c
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Setting active key cache index 8 ---> 8
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c unsetting PmkIdValidatedByAp
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Initializing policy
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state AUTHCHECK (2)
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3for this client
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_5: Jun 11 12:09:50.218: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3
    *apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c apfMsAssoStateInc
    *apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c apfPemAddUser2 (apf_policy.c:268) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Idle to Associated
    *apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c Sending Assoc Response to station on BSSID 1c:e6:c7:85:25:b0 (status 0) ApVapId 3 Slot 0
    *apfMsConnTask_5: Jun 11 12:09:50.219: ec:f3:5b:13:fe:5c apfProcessAssocReq (apf_80211.c:6290) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
    *dot1xMsgTask: Jun 11 12:09:50.223: ec:f3:5b:13:fe:5c Station ec:f3:5b:13:fe:5c setting dot1x reauth timeout = 1800
    *dot1xMsgTask: Jun 11 12:09:50.223: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
    *dot1xMsgTask: Jun 11 12:09:50.223: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 1)
    *Dot1x_NW_MsgTask_4: Jun 11 12:09:50.288: ec:f3:5b:13:fe:5c Received EAPOL START from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:09:50.288: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
    *Dot1x_NW_MsgTask_4: Jun 11 12:09:50.288: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 2)
    *osapiBsnTimer: Jun 11 12:10:20.288: ec:f3:5b:13:fe:5c 802.1x 'txWhen' Timer expired for station ec:f3:5b:13:fe:5c and for message = M0
    *dot1xMsgTask: Jun 11 12:10:20.288: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
    *dot1xMsgTask: Jun 11 12:10:20.288: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 3)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:22.812: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:22.812: ec:f3:5b:13:fe:5c Received Identity Response (count=3) from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:22.812: ec:f3:5b:13:fe:5c Reached Max EAP-Identity Request retries (3) for STA ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:22.813: ec:f3:5b:13:fe:5c Sent Deauthenticate to mobile on BSSID 1c:e6:c7:85:25:b0 slot 0(caller 1x_auth_pae.c:3117)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:22.813: ec:f3:5b:13:fe:5c Scheduling deletion of Mobile Station:  (callerId: 6) in 10 seconds
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:22.813: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Disconnected state
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:22.813: ec:f3:5b:13:fe:5c Not sending EAP-Failure for STA ec:f3:5b:13:fe:5c
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Association received from mobile on AP 1c:e6:c7:84:7a:20
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1697)
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1864)
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Applying site-specific Local Bridging override for station ec:f3:5b:13:fe:5c - vapId 3, site 'default-group', interface 'corp_byod'
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Applying Local Bridging Interface Policy for station ec:f3:5b:13:fe:5c - vlan 252, interface id 14, interface 'corp_byod'
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c STA - rates (8): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c extSuppRates  statusCode is 0 and gotExtSuppRatesElement is 1
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Processing RSN IE type 48, length 20 for mobile ec:f3:5b:13:fe:5c
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Received RSN IE with 0 PMKIDs from mobile ec:f3:5b:13:fe:5c
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c Setting active key cache index 8 ---> 8
    *apfMsConnTask_3: Jun 11 12:10:23.334: ec:f3:5b:13:fe:5c unsetting PmkIdValidatedByAp
    *apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
    *apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Deleted mobile LWAPP rule on AP [1c:e6:c7:85:25:b0]
    *apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c Updated location for station old AP 1c:e6:c7:85:25:b0-0, new AP 1c:e6:c7:84:7a:20-0
    *apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Initializing policy
    *apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    *apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    *apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 1c:e6:c7:84:7a:20 vapId 3 apVapId 3for this client
    *apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 1c:e6:c7:84:7a:20 vapId 3 apVapId 3
    *apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c apfPemAddUser2 (apf_policy.c:268) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:84:7a:20 from Associated to Associated
    *apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c Sending Assoc Response to station on BSSID 1c:e6:c7:84:7a:20 (status 0) ApVapId 3 Slot 0
    *apfMsConnTask_3: Jun 11 12:10:23.335: ec:f3:5b:13:fe:5c apfProcessAssocReq (apf_80211.c:6290) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:84:7a:20 from Associated to Associated
    *dot1xMsgTask: Jun 11 12:10:23.340: ec:f3:5b:13:fe:5c Station ec:f3:5b:13:fe:5c setting dot1x reauth timeout = 1800
    *dot1xMsgTask: Jun 11 12:10:23.340: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
    *dot1xMsgTask: Jun 11 12:10:23.340: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 1)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:23.397: ec:f3:5b:13:fe:5c Received EAPOL START from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:23.397: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:23.397: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 2)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.762: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.763: ec:f3:5b:13:fe:5c Received Identity Response (count=2) from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.763: ec:f3:5b:13:fe:5c EAP State update from Connecting to Authenticating for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.763: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Authenticating state
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.763: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.769: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.769: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=3) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.769: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 3)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.793: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.793: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 3, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.793: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.796: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.796: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=4) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.796: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 4)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.817: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.817: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 4, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.817: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.820: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.820: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=5) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.820: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 5)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.839: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.839: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 5, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.839: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.845: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.845: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=6) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.845: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.864: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.864: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 6, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.864: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.867: ec:f3:5b:13:fe:5c Processing Access-Reject for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.867: ec:f3:5b:13:fe:5c Removing PMK cache due to EAP-Failure for mobile ec:f3:5b:13:fe:5c (EAP Id 6)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.867: ec:f3:5b:13:fe:5c Sending EAP-Failure to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.868: ec:f3:5b:13:fe:5c Entering Backend Auth Failure state (id=6) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.868: ec:f3:5b:13:fe:5c Setting quiet timer for 5 seconds for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:32.868: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Unknown state
    *osapiBsnTimer: Jun 11 12:10:37.687: ec:f3:5b:13:fe:5c 802.1x 'quiteWhile' Timer expired for station ec:f3:5b:13:fe:5c and for message = M0
    *dot1xMsgTask: Jun 11 12:10:37.688: ec:f3:5b:13:fe:5c quiet timer completed for mobile ec:f3:5b:13:fe:5c
    *dot1xMsgTask: Jun 11 12:10:37.688: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
    *dot1xMsgTask: Jun 11 12:10:37.688: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 8)
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Association received from mobile on AP 1c:e6:c7:85:25:b0
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1697)
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1864)
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Applying site-specific Local Bridging override for station ec:f3:5b:13:fe:5c - vapId 3, site 'default-group', interface 'corp_byod'
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Applying Local Bridging Interface Policy for station ec:f3:5b:13:fe:5c - vlan 252, interface id 14, interface 'corp_byod'
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c STA - rates (8): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c extSuppRates  statusCode is 0 and gotExtSuppRatesElement is 1
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Processing RSN IE type 48, length 20 for mobile ec:f3:5b:13:fe:5c
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Received RSN IE with 0 PMKIDs from mobile ec:f3:5b:13:fe:5c
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Setting active key cache index 8 ---> 8
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c unsetting PmkIdValidatedByAp
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Deleted mobile LWAPP rule on AP [1c:e6:c7:84:7a:20]
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Updated location for station old AP 1c:e6:c7:84:7a:20-0, new AP 1c:e6:c7:85:25:b0-0
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Initializing policy
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3for this client
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c apfPemAddUser2 (apf_policy.c:268) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
    *apfMsConnTask_5: Jun 11 12:10:56.984: ec:f3:5b:13:fe:5c Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_5: Jun 11 12:10:56.985: ec:f3:5b:13:fe:5c Sending Assoc Response to station on BSSID 1c:e6:c7:85:25:b0 (status 0) ApVapId 3 Slot 0
    *apfMsConnTask_5: Jun 11 12:10:56.985: ec:f3:5b:13:fe:5c apfProcessAssocReq (apf_80211.c:6290) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
    *dot1xMsgTask: Jun 11 12:10:56.989: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
    *dot1xMsgTask: Jun 11 12:10:56.989: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 1)
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:57.140: ec:f3:5b:13:fe:5c Received EAPOL START from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:57.140: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
    *Dot1x_NW_MsgTask_4: Jun 11 12:10:57.140: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 2)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c Received Identity Response (count=2) from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c EAP State update from Connecting to Authenticating for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Authenticating state
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.765: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.769: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.769: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=3) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.769: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 3)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.795: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.796: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 3, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.796: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.806: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.806: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=4) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.806: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 4)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.883: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.883: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 4, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.883: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.886: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.886: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=5) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.887: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 5)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.901: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.901: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 5, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.901: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.909: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.909: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=6) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.909: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.925: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.925: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 6, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.925: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.928: ec:f3:5b:13:fe:5c Processing Access-Reject for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.928: ec:f3:5b:13:fe:5c Removing PMK cache due to EAP-Failure for mobile ec:f3:5b:13:fe:5c (EAP Id 6)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.928: ec:f3:5b:13:fe:5c Sending EAP-Failure to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.929: ec:f3:5b:13:fe:5c Entering Backend Auth Failure state (id=6) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.929: ec:f3:5b:13:fe:5c Setting quiet timer for 5 seconds for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:21.929: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Unknown state
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Association received from mobile on AP 1c:e6:c7:85:25:b0
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv4 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1697)
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Changing IPv6 ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1864)
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Applying site-specific Local Bridging override for station ec:f3:5b:13:fe:5c - vapId 3, site 'default-group', interface 'corp_byod'
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Applying Local Bridging Interface Policy for station ec:f3:5b:13:fe:5c - vlan 252, interface id 14, interface 'corp_byod'
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c processSsidIE  statusCode is 0 and status is 0
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c processSsidIE  ssid_done_flag is 0 finish_flag is 0
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c STA - rates (8): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c suppRates  statusCode is 0 and gotSuppRatesElement is 1
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c STA - rates (12): 130 132 139 12 18 150 24 36 48 72 96 108 0 0 0 0
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c extSuppRates  statusCode is 0 and gotExtSuppRatesElement is 1
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Processing RSN IE type 48, length 20 for mobile ec:f3:5b:13:fe:5c
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Received RSN IE with 0 PMKIDs from mobile ec:f3:5b:13:fe:5c
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Setting active key cache index 8 ---> 8
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c unsetting PmkIdValidatedByAp
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Initializing policy
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3for this client
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Not Using WMM Compliance code qosCap 00
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 1c:e6:c7:85:25:b0 vapId 3 apVapId 3
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c apfPemAddUser2 (apf_policy.c:268) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
    *apfMsConnTask_5: Jun 11 12:11:23.073: ec:f3:5b:13:fe:5c Stopping deletion of Mobile Station: (callerId: 48)
    *apfMsConnTask_5: Jun 11 12:11:23.074: ec:f3:5b:13:fe:5c Sending Assoc Response to station on BSSID 1c:e6:c7:85:25:b0 (status 0) ApVapId 3 Slot 0
    *apfMsConnTask_5: Jun 11 12:11:23.074: ec:f3:5b:13:fe:5c apfProcessAssocReq (apf_80211.c:6290) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Associated
    *dot1xMsgTask: Jun 11 12:11:23.077: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
    *dot1xMsgTask: Jun 11 12:11:23.078: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 1)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:23.134: ec:f3:5b:13:fe:5c Received EAPOL START from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:23.134: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Connecting state
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:23.134: ec:f3:5b:13:fe:5c Sending EAP-Request/Identity to mobile ec:f3:5b:13:fe:5c (EAP Id 2)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c Received Identity Response (count=2) from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c EAP State update from Connecting to Authenticating for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Authenticating state
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.120: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.123: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.123: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=3) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.123: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 3)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.133: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.133: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 3, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.133: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.136: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.136: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=4) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.136: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 4)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.319: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.319: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 4, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.319: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.321: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.321: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=5) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.321: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 5)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.338: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.338: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 5, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.338: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.347: ec:f3:5b:13:fe:5c Processing Access-Challenge for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.347: ec:f3:5b:13:fe:5c Entering Backend Auth Req state (id=6) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.347: ec:f3:5b:13:fe:5c Sending EAP Request from AAA to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.361: ec:f3:5b:13:fe:5c Received EAPOL EAPPKT from mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.361: ec:f3:5b:13:fe:5c Received EAP Response from mobile ec:f3:5b:13:fe:5c (EAP Id 6, EAP Type 25)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.361: ec:f3:5b:13:fe:5c Entering Backend Auth Response state for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Processing Access-Reject for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Removing PMK cache due to EAP-Failure for mobile ec:f3:5b:13:fe:5c (EAP Id 6)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Sending EAP-Failure to mobile ec:f3:5b:13:fe:5c (EAP Id 6)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Entering Backend Auth Failure state (id=6) for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c apfBlacklistMobileStationEntry2 (apf_ms.c:4864) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Associated to Exclusion-list (1)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.365: ec:f3:5b:13:fe:5c Scheduling deletion of Mobile Station:  (callerId: 44) in 10 seconds
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c 0.0.0.0 8021X_REQD (3) Change state to START (0) last state 8021X_REQD (3)
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Reached FAILURE: from line 4442
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c Scheduling deletion of Mobile Station:  (callerId: 9) in 10 seconds
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c Max AAA failure for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c Setting quiet timer for 5 seconds for mobile ec:f3:5b:13:fe:5c
    *Dot1x_NW_MsgTask_4: Jun 11 12:11:37.366: ec:f3:5b:13:fe:5c dot1x - moving mobile ec:f3:5b:13:fe:5c into Unknown state
    *osapiBsnTimer: Jun 11 12:11:42.287: ec:f3:5b:13:fe:5c 802.1x 'quiteWhile' Timer expired for station ec:f3:5b:13:fe:5c and for message = M0
    *osapiBsnTimer: Jun 11 12:11:47.288: ec:f3:5b:13:fe:5c apfMsExpireCallback (apf_ms.c:589) Expiring Mobile!
    *apfReceiveTask: Jun 11 12:11:47.289: ec:f3:5b:13:fe:5c Scheduling deletion of Mobile Station:  (callerId: 46) in 60 seconds
    *apfReceiveTask: Jun 11 12:11:47.289: ec:f3:5b:13:fe:5c apfMsExpireMobileStation (apf_ms.c:5708) Changing state for mobile ec:f3:5b:13:fe:5c on AP 1c:e6:c7:85:25:b0 from Exclusion-list (1) to Exclusion-list (2)
    *apfReceiveTask: Jun 11 12:11:47.289: ec:f3:5b:13:fe:5c pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
    *apfReceiveTask: Jun 11 12:11:47.289: ec:f3:5b:13:fe:5c 0.0.0.0 START (0) Deleted mobile LWAPP rule on AP [1c:e6:c7:85:25:b0]
    Kindly give your opinions on this.
    BR//
    Vijay

    Hi Najaf,
    We have tried the same credentials only .
    Level    Date and Time    Source    Event ID    Task Category
    Information    5/19/2014 6:58:50 PM    Microsoft-Windows-Security-Auditing    6273    Network Policy Server    "Network Policy Server denied access to a user.
    Contact the Network Policy Server administrator for more information.
    User:
        Security ID:            NULL SID
        Account Name:            xxxxxx
        Account Domain:          xxxxxxx
        Fully Qualified Account Name:   xxxxxxx
    Client Machine:
        Security ID:            NULL SID
        Account Name:            -
        Fully Qualified Account Name:    -
        OS-Version:            -
        Called Station Identifier:    1c-e6-c7-xx-xx-xx:HM_BYOD
        Calling Station Identifier:    4c-7f-62-xx-xx-xx
    NAS:
        NAS IPv4 Address:        10.x.x.x
        NAS IPv6 Address:        -
        NAS Identifier:            WLC
        NAS Port-Type:            Wireless - IEEE 802.11
        NAS Port:            1
    RADIUS Client:
        Client Friendly Name:        Wireless
        Client IP Address:        10.x.x.x
    Authentication Details:
        Connection Request Policy Name:    xxxxxxxxx
        Network Policy Name:        -
        Authentication Provider:    Windows
        Authentication Server:        xxxxxxxxx
        Authentication Type:        PEAP
        EAP Type:            -
        Account Session Identifier:        -
        Logging Results:        Accounting information was written to the local log file.
        Reason Code:            16
        Reason:                Authentication failed due to a user credentials mismatch. Either the user name provided does not map to an existing user account or the password was incorrect.
    Regards,
    Vijay

  • HP DeskJet 6980/Mac OS X 10.6.8 Wireless Printing Issues

    I have been having continuous issues with printing wirelessly from my HP DeskJet 6980.  It will print when hooked up via USB.  But if I try plugging it into via ethernet into my router it can be added but once I print I get an error.  If I try to print via wifi I get the same error.  It is attached as a screen shot.  I have tried deleting them and readd the printer.  I have added via the IP Address.  I have turned the printer on, turned it off.  I have downloaded printer updates via Apple Support.  I'm at a loss.  Please help!

    Apple/About This Mac/More Info/Hardware/Power/Battery Information - copy and paste the information here. Do not include any serial numbers.
    User Tip:  Apple notebook batteries – maintenance and troubleshooting
    Calibrating a portable computer batteryWhenever you purchase new batteries, calibrate them. Current Apple portable computer batteries are pre-calibrated and do not require the calibration procedure.  These computers use batteries that should be replaced only by an Apple Authorized Service Provider. MacBook Pro (13-inch, Mid 2010) and later MacBook Pro (15-inch, Mid 2010) and later MacBook Pro (17-inch, Early 2009) and later

  • Win 7 laptop and Deskjet 6980 Printer don't connect wirelessly

    Hi,
    I installed the Windows driver for the HP 6980 printer. The printer shows as being "offline" in Windows control panel. The printer network light and wireless status light are on. I ran the HP Home network Diagnostic Utility and it tells me:
    1. HP software required to connect to the printer is not installed
    and then from the "advanced" tab it tells me further that
    2. The HP Service SLP is not installed
    3. HP service hpqcxs08 is not installed
    4. HP service device discovery is not installed
    So, how do I get these things installed?? Where do I get them?
    Is this really the problem or is there something else going on?
    I have Verizon FIOS and an Actiontec router. Do I need to give the printer a static IP address (as suggested by the HP install manual)??
    Any suggestions/advice much appreciated.

    Hi,
    Is the printer connected to your wireless network?
    A solid blue light indicate a proper connection.
    If it is blinking it means the printer is disconnected from your network, temporary plug a USB and go to Applications > Hewlett-Packard > Device Utilities. Follow the HP Setup Assistant to reconfigure the wireless connection.
    If the printer appear as connected please clarify your router brand and model in order to better understand the problem.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Deskjet 3050 J610a - Unexpected wireless connection problem.

    Running:
    MacOSX 10.7.4
    HP Software: HP_Lion_Ink_SW_v12.13.17
    Printer: Deskjet 3050 J610a had been working perfectly through wireless connection from a
    MacBook5,1 Intel Core 2 Duo, while I had been using HP Software HP_Installer_DJF4100_v9.7.1, that was *not* meant for this printer, but I could 'ADD" the printer Deskjet 3050 via System Preferences, through HP Socket, 
    Looking [unwisely] for a more "functional"  configuration, I looked up HP support and found that a specific software had been released for computers running "Lion". 
    So I uninstalled the previous DJF4100 software, restarted the computer, and installed the new software and drivers for Lion as indicated above.
    Now the printer Deskjet 3050 J610a shows up in the computer's network under 'Devices"  as
    "HPJ610a.047DED", Network Type:Computer-to-Computer. It is also detected with "
     Security:None", whereas my whole home Wi-Fi network is encrypted with WPA/WPA2 Personal. 
    I could of course regress to the previous software and configuration, but before doing that I would like to understand why this new software that has been released by HP for Mac computers running Lion is behaving in such a way, why the printer shows as a stand alone device (which it never did before).
    As I said, before I regress to the previous configuration, using a software that originally is not the one required by the printer, neither by the computer's operating system, I welcome all information and suggestions.
    I need that wireless connection!
    Thanks in advance.
    This question was solved.
    View Solution.

    Download and install this: http://support.apple.com/kb/DL907
    Reset the printing system:
    - Go to System Preferences > Print & Scan
    - Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - this will delete ALL of your printers!
    - Select the plus sign to re-add a printer. Select the Defualt tab on the top of the window. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Deskjet 2544 wirelessly connects to all PCs on network, except mine.

    I am having a great deal of difficulty tracking down a problem with connecting to a new printer we have at home. It was set up correctly to connect to our home router, and it definitely is connected with its own IP address.
    All computers and mobile devices have successfully connected to this printer upon installing the drivers, except for one, which is connected to the router via ethernet, runs Windows 7 64bit.
    I have tried every diagnostic utility and reinstalled the drivers multiple times to no avail. Windows itself can see the printer fine, but is unable to install it. When I try and add the device via the HP drivers by clicking 'Connect New Printer >> Wireless', instead of checking the network environment and finding the device it immediately moves on to the usb setup screen with the tickbox at the bottom for it already being set up to connect. I try and insist that the device is already connected to the network, which it is, and I then try and input its IP address manually at the next prompt, but the drivers still fail to detect it (even though windows sees the printer when I do 'Add New Printer' via Devices and Printers).
    I have checked firewall and antivirus settings, attempting to connect with them both enabled and disabled.
    There is something clearly wrong with my computer, as the other PCs on this network can connect just fine. I need some way of completely uninstalling any HP drivers and removing all registry entries correctly, so I can start from scratch again to see if there is some kind of driver corruption on my end. Either that, or I need a list of all the Windows services that are required by the drivers, so that I can check that they are running.
    Thank you for any help that you can provide.
    For reiteration:
    Spec: Windows 7 Home Premium x64
    Printer: Deskjet 2544
    Connected: Wireless - confirmed
    Problem summary: One PC on home network can not connect to printer.

    Hi,
    My suggestion:
    (a) Give it a static IP address (keep the number)
    (b) From the computer which is wired connected to router add a printer and use its IP address.
    (c) Install software and drivers as required
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Deskjet 6980 direct to Lenovo T 500 Windows 7

    Trying to connect Deskjet 6980 to Lenovo T 500 in wireless mode - not through router but direct. Can not seem to make this work. Any suggestions

    If you mean a USB connection, connecting the PC and printer via USB (with the printer on), should cause Win7 to load the driver.  There is no downloadable software from HP.
    See this for more: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=4679...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Printing with HP Deskjet 1510 from wireless connected ipad using computer connected to broadband

    Hi,
    I am trying to figure out easy way to print any content from my ipad connected with wifi through xp computer to HP Desjket 1510,

    Hi Ieb_Fabulous,
    Welcome to the HP Support Forums. I gather you are trying to hook your Deskjet 1510 printer to your laptop with a wireless connection.
    This printer does not support wireless connectivity. I have included the Deskjet 1510 Printer Specifications for your reference.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Deskjet 3050 wireless connection trauma

    Hi, my Deskjet 3050 has stopped working over the wireless network and I'm stumped. It was working fine, but has now stopped. My laptop is connected to the home router (BT) and the printer is also connected to the same router (according to the router config page), but I can't connect to print. I've gone back to the beginning and re-installed the printer and all drivers and software, I can print with a USB, I can transfer wireless config details via USB, but I still can't print wirelessly. Help?

    Hi PG-PG,
    I understand that you are having a problem with getting the printer working on your wireless network. I will try my best to help you resolve this. I suggest power cycling your network.
    How to power cycle network
    Follow these steps to reset your HP printer, your wireless router, and your computer.
    1.Press the Power button on the HP printer to turn it off.
    2.Disconnect the power cord from the rear of the HP printer.
    3.Disconnect the power cord from the wireless router.
    4.Turn off the computer.
    5.Wait 30 seconds.
    6.Reconnect the power cord to the wireless router.
    7.Wait 30 seconds, or until the router is fully on and ready.
    8.Turn the computer back on.
    9.Wait for the computer to reload.
    10.Reconnect the power cord to the rear of the HP printer.
    11.Turn the printer back on.
    If this does not resolve the issue then I suggest setting a Static IP Address. In this document for Printer Does Not Maintain Wireless Connection has steps for setting that up.
    I hope this information helps, please let me know how it goes.
    Thank you,
    I worked on behalf of HP.

  • Having a problem with wireless connection. On my Windows XP 32 bit system and a 6510 printer, initi

    On my Dell Latitude D620, Windows XP 32 bit system and my 6510 printer wireless connection (Linksys EA4500) , everything works fine after the computer is booted.  After a period of time (usually overnight), I lose connection to the printer (the scanner icon with a red x is shown on my Windows task bar and I can't print.  Ran Windows Fix and the HP fix programs.  The only thing that solves it is to reboot the computer.  A second symptom is that my IE8 stops connecting to the internet at the same time (gives a 'waiting for' response that never changes).  Firefox still connects OK when this is happening.  So I suspect the problem isn't with the printer, but with my Windows set up.  It is a fresh XP SP3 install (hard drive crashed, but it happened before also).  I reset IE, checked my proxy, no malware, happens with or without firewalls and security programs.
    Hoping that someone else has run into this problem.  Been all over Google, and the IE doesn't work / Firefox works is fairly common, but none of the fixes helps. 

    If you want you can reload Firefox 4.0 or the last "old" version is 3.6.16 and is available here:
    http://www.mozilla.com/en-US/firefox/all-older.html
    Just reinstall your choice of FF. The bookmarks are in a different directory and are NOT overwritten. Some of the Add-ons that worked in 3.6 DO NOT work with 4.0, pay attention and head any warnings when you start 4.0.
    I had to disable extensions: Flashblock and WOT
    Firefox SafeMode? - A troubleshooting mode.
    1.You can open the Firefox 4.0 SafeMode by holding the Shft key when you use the Firefox desktop or Start menu shortcut.
    To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.
    For more help, see this: http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    Hope this helps you out.
    Feedback is appreciated especially if this helps you out.

Maybe you are looking for

  • SSAS Tabular : MDX query goes OutOfMemory for a larger dataset

    Hello all, I am using SSAS 2012 Tabular to build the cube to support the organizational reporting requirements. Right now the server is Windows 2008 x64 with 16GB of Ram installed. I have the following MDX query. What this query does is get the membe

  • Importing txt-files in Labview

    Hello, I am a beginner in programming labview applications so its possible my next question is very easy to program but i dont know how My question is about importing a txt-file (csv-format) in labview. This txt-file is updated every 10 minutes and I

  • ITunes cannot run because some of its required files are missing - EVERYDAY

    I get this message every day, I reinstall iTunes every day and it works fine for the day. I take my laptop home ( close the lid without logging out or shutting down, it goes into hibernate/sleep mode), even if I don't use the laptop at home, when I c

  • Help Urgent! Problems with dashboard

    My iphone fell and now anything that is in the lower part of the screen doesnt work it looks fine, for example in the lower part of the screen were it says phone, mail, safari, ipod it looks perfect but I cant open it same thing happens when im typin

  • Apple beta not appearing

    I am an apple beta tester and I have just erased my Macbook air and re-downloaded the beta program, however the mail beta is not appearing on the mac app store.