Windows 7 Wireless Logon - Problems with 802.1X Machine & User Authentication

Hello All,
We’ve had difficulty with our Windows 7 clients authenticating to our wireless network. I’m hoping someone out there has experienced the same thing and can offer some help.
Some info about our environment:
Single Windows 2008 R2 domain with 6 DCs
MS Radius server
Aruba wireless controllers
The Problem:
The client computer boots,
Auths as machine (802.1X successful)
User enters creds
User auth (802.1X successful)
To this point, everything is working normally. Next is where it gets weird.
During the logon process, there is another machine auth
2-5 minutes later another User auth
OS is up and usable (connected to wireless network); however, no homefolder is mapped and GPP didn’t apply properly.
From what I understand, after the user has logged in, Windows never attempts another machine authentication. When the user logs out, Windows can attempt it.
Can anyone offer some insight to what is causing this? I have logs available if anyone is interested.
Thanks in advance for any help you can offer!
Brett
-- Brett

I did a network trace to gain more insight. I don’t understand why after 802.1X auth is successful on port 1, it then initiates 802.1X auth on port 2.
Can you offer any insight?
10487    3:50:19 PM 8/23/2012    63.0340126                                                         
ONEX_MicrosoftWindowsOneX                ONEX_MicrosoftWindowsOneX:Port(1 (0x1)): Authentication Starting   {ONEX_MicrosoftWindowsOneX:126, NetEvent:5}
10867    3:50:19 PM 8/23/2012    63.3403904                                                         
ONEX_MicrosoftWindowsOneX                ONEX_MicrosoftWindowsOneX:Port(1 (0x1)): Time taken for this authentication = 281 (0x119) ms               
{ONEX_MicrosoftWindowsOneX:126, NetEvent:5}
Then >>>
11718    3:50:35 PM 8/23/2012    79.3196653                                                         
ONEX_MicrosoftWindowsOneX                ONEX_MicrosoftWindowsOneX:OneXDestroySupplicantPort     {ONEX_MicrosoftWindowsOneX:126, NetEvent:5}
11938    3:50:36 PM 8/23/2012    80.0530315                                                         
ONEX_MicrosoftWindowsOneX                ONEX_MicrosoftWindowsOneX:Finished initializing a new port with id=2 (0x2) and friendly name=Dell Wireless 1504 802.11b/g/n (2.4GHz)         
{ONEX_MicrosoftWindowsOneX:126, NetEvent:5}
11959    3:50:36 PM 8/23/2012    80.0556734                                                         
ONEX_MicrosoftWindowsOneX                ONEX_MicrosoftWindowsOneX:OneXStartAuthentication           {ONEX_MicrosoftWindowsOneX:126,
NetEvent:5}
11964 3:50:36 PM 8/23/2012
80.0557074 svchost.exe (1036)
ONEX_MicrosoftWindowsOneX ONEX_MicrosoftWindowsOneX:Port(2 (0x2)): Starting a new 802.1X authentication (MSM initiated)
11965 3:50:36 PM 8/23/2012
80.0557333 svchost.exe (1036)
ONEX_MicrosoftWindowsOneX ONEX_MicrosoftWindowsOneX:Port(2 (0x2)): Authentication Starting
-- Brett

Similar Messages

  • Problem with Afaria and LDAP user authentication in Android device

    Hi all,
    I have a server with Afaria 7 (SP4, hotfix3) installed. In this Afaria there is a tenant (system) without LDAP/AD integration working correctly. I need to have other tenant with LDAP integration in which the users must be authenticated.
    I know that for iOS devices is necessary reinstall the iphoneserver selecting "Afaria Server managed authentication" but at first I want to make run the Android devices. For this reason I don't do this yet.
    I follow the next steps:
    1-Create a new tenant
    2- Configure LDAP integration
    3-Create a inventory policy with authentication required
    4-Create a static group associated to the inventory policy
    5-Create a enrolment policy associated to the static group.
    When I launch the Afaria agent on the device, the user/password parameters are required. After fill the user/password parameters, the device connect to the server and then is show the message "user or password incorrects".
    I have seen the log and seem the problem is that Afaria can't authenticate this user.
    I validate that Afaria can "see" the LDAP users creating a user group that contains this user(JimenM99)
    The problem is autentication, because if I remove "autentication required" of the inventory policy, the device enrol correctly.
    Could you please help to solve this problem?
    Thanks in advance.  

    Hi all,
    I have a server with Afaria 7 (SP4, hotfix3) installed. In this Afaria there is a tenant (system) without LDAP/AD integration working correctly. I need to have other tenant with LDAP integration in which the users must be authenticated.
    I know that for iOS devices is necessary reinstall the iphoneserver selecting "Afaria Server managed authentication" but at first I want to make run the Android devices. For this reason I don't do this yet.
    I follow the next steps:
    1-Create a new tenant
    2- Configure LDAP integration
    3-Create a inventory policy with authentication required
    4-Create a static group associated to the inventory policy
    5-Create a enrolment policy associated to the static group.
    When I launch the Afaria agent on the device, the user/password parameters are required. After fill the user/password parameters, the device connect to the server and then is show the message "user or password incorrects".
    I have seen the log and seem the problem is that Afaria can't authenticate this user.
    I validate that Afaria can "see" the LDAP users creating a user group that contains this user(JimenM99)
    The problem is autentication, because if I remove "autentication required" of the inventory policy, the device enrol correctly.
    Could you please help to solve this problem?
    Thanks in advance.  

  • HT201250 Unexpected problem with Mac time machine!

    Hi every one!
    I'm having an unexpected problem with my time machine! the moment I hook up the back up drive my Mac crashes and the only thing I can do is to force restart. I'm not sure if the problem is with the back up disk or the Time Machine itself. I've successfully used the app since now and this just happens! I can neither access the disk in finder nor fix it by disk utility... would you please help me?
    PS. the disk is encrypted, I doubt that might be causing the problem?!    
    Thank you!
    chargar

    Launch the Console application by entering the first few letters of its name into a Spotlight search. Enter the name of the crashed process in the “Filter” text field. Post the messages from the time of the last crash, if any -- the text, please, not a screenshot.
    Then, still in the Console window, look under User Diagnostic Reports for crash logs related to the process. Select the most recent one and post the contents -- again, not a screenshot. For privacy’s sake, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)

  • Problem with the virtual  machine

    Hello.
    i've encountered problem with the virtual  machine. Java instance is reseting sometimes. I found message in dev_server0 there is:
    <b>
    [Thr  6] JLaunchIExitJava: exit hook is called (rc = 666)
    [Thr  6] **********************************************************************
    ERROR => The Java VM terminated with a non-zero exit code.
    </b>
    in dev_jcontorol:
    <b>
    [Thr  1] Thu Mar 13 15:58:39 2008
    [Thr  1] JStartupICreateProcess: fork process (pid 16077)
    [Thr  1] JControlICheckProcessList: process server0 started (PID:16077)
    </b>
    where i can looking the reason of this?
    regards,
    Denis

    Hi Denis,
    This looks like a memory issue, similar problems have been posted on this forum before.
    Change the following params.
    -XX:PermSize=2048m
    -XX:MaxPermSize=2048m
    Also,
    See SAP note 709140 and the referenced notes.
    Regards,
    Siddhesh

  • My Time Machine says there is no backup disk available.  I've never had any problems with my time machine.  I'm not technologically savvy, so if anyone can help, I'd appreciate it!

    My Time Machine says there is no backup disk available.  I've never had any problems with my time machine completing backups.  I was away from house with my laptop for about 9 days so I'm wondering if there is something I need to do now that I'm home to get it working again.  I'm not technologically savvy, so if anyone can help, I'd appreciate it!
    Thanks,
    Jana

    You can lose your ability to backup through TM for any number of reasons, but the most common is what happens after a update. If your drive still works, your best approach is to read this:
    http://www.chriscolotti.us/technology/how-to-fix-osx-mountain-lion-time-machine/
    The attached link contains helpful graphics, so don't worry if you're not tech savvy.

  • Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it.  What's up?

    Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it.  What's up?

    You might get some help over on the shuffle discussions.
    http://discussions.apple.com/forum.jspa?forumID=822

  • We encountered a problem with some client machines that use Firefox version 24ESR and IE8. Ajax requests of aspx pages from Firefox are getting the following er

    I encountered a problem with some client machines that use Firefox version 24ESR and IE8.
    Ajax requests of aspx pages from Firefox are getting the following error from the iis server (iis version 7.5):
    Bad Request - Request Too Long
    HTTP Error 400. The size of the request headers is too long.
    From analyzing the request that was sent to the server, I saw that the request consist of only the viewstate of the aspx page.
    I tried to disable the viewstate for one page and the server got the request correctly.
    I do not encounter any issues on these laptops with postback requests from Firefox or when running the same application with IE8.

    Sometimes that means that the page address sent is loo long.
    Check the link address you are using.
    I can't help you further and will send for more help.

  • Problems with 802.1x MS PEAP machine and user authentication

    Using Microsoft PEAP 802.1x client on Windows XP SP2, if we enable machine authentication against a Windows Domain, the machine authentication is successful and the machine gets access to the network. However, when user logon occurs to the domain, contrary to the flow given in ACS and Windows documentation, no user authentication takes place.
    We need to differentiate user access based on their identities. We need machine authentication only to allow users access to the domain controller and also GP implementation.
    Any idea why user does not get prompted when they logon. 802.1x is configured in users profile and I have tried with both integrated and non-integrated with Domain logon (i.e. "use my windows logon name and password and domain (if any) option"
    There is no record of any identity request/response in ACS after the initial machine authentication (which appears in successful authentication log)
    We are using MS-CHAPv2.

    Update...The problem of cached credentials in MS PEAP does not occur if "enable logon using Windows username and password (and domain if any) is checked. Using this option, MS PEAP always uses logged on users most current credentials.
    However, using this option sends the username as "DOMAIN\USERNAME". Since we are using ACS internal database for user authentication (even though the ACS and Windows passwords are same - using an identity management system) ACS does not recognize the user.
    I have tried proxy distribution with prefix stripping but it does not seem to work when it is pointing to the same ACS server on which proxy distribution is configured and which receives the request.
    Any idea how the domain\ can be ignored by ACS?

  • Slow wireless speed with new iMac Intel- problem with 802.11g?

    There IS a problem with the new Intel Mac, I have tried both the Intel iMac and the new Intel Mac mini and they both have the same problem with slow wireless speed (or rather it variates, if I do a ping to another computer on the network the speed goes from < 1 ms up to 1000 ms and then down to < 1 ms and so on). The older mac minis, my Linux boxes and my Windows PCs don´t have that problem. I have also read reports on the net and it appears that most users experiencing this problem have wireless card firmware version 101.3 (3.120.28.3) . A possible "fix" is to change to 802.11b on the router and then it works. No speed fluctuations and a stabile network! I know it is a bad solution, I would prefer to use 802.11g and get the speed. However I think this points to a problem with the drivers regarding 802.11g. I am starting up a new thread on this and those of you with problems, please try to switch to 802.11b and if it works let us make Apple aware of this.
    /Tobbe

    Which home hub do you have?
    There is some general help at this link    Wireless connection problems
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Windows 7 Home Premium with 802.1x problems with the Authentication

    We have problems with  OS Windows 7 Home Premium 802.1x, the message in ACS:
    EAP-TLS or PEAP authentication failed during SSL handshake
    ACS v4.1
    We have OS Windows 7 Professional and doesn´t have problems with the authentication.
    I hope that you can help me
    Regards

    We were investigated with specialist people of OS Windows and the conclusion was that the Home Premium Version has restrictions about authentication and domain (Active Directory). So we need change the version of OS (Proffessional for example).
    If you had another tip, please tell me and I try it for resolve this issue, if not we have to change the OS.
    Regards

  • Windows 2008 Terminal Server "user must change password at next logon" problem with Windows 7 client.

    Hi,
    I have a fully patched Windows 2008 SP2 Terminal Server and a fully patched Windows 7 client.
    I have logged into the Windows 2008 SP2 Terminal Server server with a test account via RDC before.
    When I try to log in via RDC to the 2008 TS with a test account which has been marked with the setting "User must change password at next logon" I get the RDC message "You must change your password before logging on the first time.  For assistance, contact your system administrator or technical support."  I need to force the user to change their password once it has been issued, any ideas on how this can be done?
    Thanks,
    Dan

    This does not resolve my issue all the way. I'm having the same problem; When i'm "deploying" users, i always want the users to set their own passwords. Ok, so I then set the auth mode to "RDP Security layer". It seemed to work fine, and it does for that
    special purpose.
    Just like Daniel, my clients are connecting to our terminal server from several/different "customer-domains" So, they can't logon locally(on their local computer) and change their password, it has to be done THROUGH the terminal server.
    But if I turn on RDP Security Layer, users can't use remoteapp through tsgw they only get: "Your Remote Desktop Connection Failed because the remote computer cannot be authenticated" Any ideas?
    Also, our terminal servers is round robin based in a farm. So users connect to: tsfarm.domain.com(yes, public a-record which resolves to two internal adresses) This is because, we're using a wilcard *.domain.com as SSL certificate.
    But, when i'm using this, our clients sometimes get double auth when they login. I only get the double auth when tsfarm.domain.com resolves to server A, but the session broker wants the user to be on server B.(load balancing)
    This does not occur when SSL is enforced, any ideas?

  • Window 8 WiFi problem with Cisco wireless network

    Anyone encounter a Windows 8 WiFi authentication problem with Cisco wireless network?
    We are using WLC 5508, 7.2.111, and AP 3602i with WPA2.
    Sent from Cisco Technical Support iPad App

    This problem occurred with Soney, and Dell models.  Lenovo with Windows 8 factory installed is working fine.
    Won't make any difference as these laptop's wireless NIC cards are different.
    Can you try with OPEN authentication.  If the Sony and/or Dell laptop works, then you start cranking up the security and/or encryption settings until you break them.
    I'm with Scott here:  It's got to be a wireless NIC card driver.
    As what George has stated, post the debug of the failed attempts.

  • RDP with 802.1x, machine and user auth and dynamic VLAN

    Hi,
    we have 802.1x implemented with machine and user auth. We also use dynamic VLAN assignment. Our client is AnyConnect 3.1. Operating system is Windows 7. With Windows XP, it works just fine.
    When we try to connect to the 802.1x auth desktop with RDP (desktop is machine authenticated, no user is logged in), we are able to authenticate but as soon as VLAN and IP address changes according to user authentication profile, RDP session is terminated. It is not just disconnected but remote user is logged out and AnyConnect reverts 802.1x session back to machine VLAN. We cannot login with RDP and just loop between machine-user-machine authentication.
    With this behavior the TermDD message (ID 56) can be seen in system log. Following the response 
    http://social.technet.microsoft.com/Forums/windows/en-US/b7814ec3-6a49-469c-8773-909c50415942/the-rdp-protocol-component-x224-detected-an-error-in-the-protocol-stream-and-has-disconnected-the
    , I was able to get rid of TermDD message but I still loop in machine-user-machine authentication.
    The following is TermDD message:
    +
    System
    Provider
    [  Name]
    TermDD
    EventID
    56
    [  Qualifiers]
    49162
    Level
    2
    Task
    0
    Keywords
    0x80000000000000
    TimeCreated
    [  SystemTime]
    2013-06-10T09:25:28.515308700Z
    EventRecordID
    26643
    Channel
    System
    Computer
    XTCSSPWA03.cen.csint.cz
    Security
    EventData
    \Device\Termdd
    10.190.64.208
    0000040002002C000000000038000AC00000000038000AC000000000000000000000000000000000410200D0
    Binary data:
    In Words
    0000: 00040000 002C0002 00000000 C00A0038 
    0008: 00000000 C00A0038 00000000 00000000
    0010: 00000000 00000000  D0000241
    In Bytes
    0000: 00 00 04 00 02 00 2C 00    ......,.
    0008: 00 00 00 00 38 00 0A C0   ....8..À
    0010: 00 00 00 00 38 00  0A C0   ....8..À
    0018: 00 00 00 00 00 00 00 00   ........
    0020: 00 00 00  00 00 00 00 00   ........
    0028: 41 02 00 D0               A..Ð
    Also AnyConnect shows that upon successful authentication and DHCP operation, it catches some exception and reverts back from user to machine VLAN:
    3876: XTCSSPWA03: 6 10 2013 11:24:44.259 -0100: %NAM-6-INFO_MSG: %[tid=1436][mac=1,6,d4:85:64:b8:43:61]: {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2}: Authentication Success
    3877: XTCSSPWA03: 6 10 2013 11:24:44.259 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2} canceling existing DHCP work
    3878: XTCSSPWA03: 6 10 2013 11:24:44.259 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: ipv4: {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2} stop
    3879: XTCSSPWA03: 6 10 2013 11:24:44.259 -0100: %NAM-7-DEBUG_MSG: %[tid=1436][comp=SAE]: NET (3) cdiOsIoctlSet: CDI_8023_FRAME_IO_ECHO, ifIndex(1), pData(0x0103FA38), dataLen(0) (cimdIo.cpp 2156)
    3880: XTCSSPWA03: 6 10 2013 11:24:44.259 -0100: %NAM-7-DEBUG_MSG: %[tid=1436][comp=SAE]: NET (3) cdiOsIoctlSet: echo (cimdIo.cpp 2270)
    3881: XTCSSPWA03: 6 10 2013 11:24:44.259 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2} creating a new DHCP work
    3882: XTCSSPWA03: 6 10 2013 11:24:44.259 -0100: %NAM-7-DEBUG_MSG: %[tid=1448]: Ipv4 {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2}: executing: CancelCmd [state: COMPLETE]
    3883: XTCSSPWA03: 6 10 2013 11:24:44.259 -0100: %NAM-6-INFO_MSG: %[tid=1436][mac=1,6,d4:85:64:b8:43:61]: {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2}: DHCP: Sending DHCP request
    3884: XTCSSPWA03: 6 10 2013 11:24:44.259 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: queueing DHCP work
    3885: XTCSSPWA03: 6 10 2013 11:24:44.259 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: ipv4: {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2} start
    3886: XTCSSPWA03: 6 10 2013 11:24:44.259 -0100: %NAM-7-DEBUG_MSG: %[tid=1436][comp=SAE]: NET (3) cdiOsIoctlSet: CDI_8023_FRAME_IO_ECHO, ifIndex(1), pData(0x0103FA3C), dataLen(2) (cimdIo.cpp 2156)
    3887: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436][comp=SAE]: NET (3)  data follows ... (cimdIo.cpp 2159)
    3888: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436][comp=SAE]: NET (3)      08 06                                                .. (cimdIo.cpp 2159)
    3889: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436][comp=SAE]: NET (3) cdiOsIoctlSet: echo (cimdIo.cpp 2270)
    3890: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436][comp=SAE]: NET (3)  pEthTypes data follows ... (cimdIo.cpp 2273)
    3891: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436][comp=SAE]: NET (3)      06 08                                                .. (cimdIo.cpp 2273)
    3892: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Ipv6 Connect {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2} starting
    3893: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1448]: Ipv4 {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2}: executing: StartCmd [state: COMPLETE]
    3894: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436][comp=SAE]: NET (0) S_ndisIoControl: returning cached xmitLinkSpeed: 100000000 bps (cimdIo.cpp 3558)
    3895: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436][comp=SAE]: NET (0) NDIS OID: ifIndex=1 GET OID_GEN_LINK_SPEED(0x10107) datalen=4, cbRW=4 cbNeeded=0 acErr=0 winErr=0 (cimdIo.cpp 3686)
    3898: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Network CS-wired-pass: AccessStateMachine current state = ACCESS_CONNECTED, received adapterState = authenticated
    3899: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Network CS-wired-pass: port authentication succeeded
    3900: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Network CS-wired-pass: AccessStateMachine new state = ACCESS_CONNECTED
    3901: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Ipv4 {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2}: received Cancel event [state: COMPLETE]
    3902: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Ipv4 {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2}: state: COMPLETE -> INIT
    3903: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Ipv4 {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2}: received Get-Connectivity event [state: INIT]
    3904: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Ipv4 {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2}: state: INIT -> WAIT_FOR_CONNECTIVITY
    3905: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Ipv4 Connectivity Result: IN_PROGRESS
    3906: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1448]: Ipv4 {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2}: executing: GetConnectiviyCmd [state: WAIT_FOR_CONNECTIVITY]
    3907: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Ipv6 Connectivity Result: FAILURE
    3908: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Ipv4 {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2}: received Check-Connectivity event [state: WAIT_FOR_CONNECTIVITY]
    3909: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Ipv4 {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2}: (initial) ipCfg: IP:10.190.95.74(255.255.255.248) GW:10.190.64.1
    3910: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1448]: Ipv4 {94B69AD2-E98C-4C94-BBC8-A94DC3894FE2}: executing: TestConnectivityCmd [state: WAIT_FOR_CONNECTIVITY]
    3911: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1468][comp=SAE]: API (3) event: complete (portWorkList.c 130)
    80: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAMSSO-7-DEBUG_MSG: %[tid=1524]: Tx CP Msg: <?xml version="1.0" encoding="UTF-8"?><SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ssc="http://www.cisco.com/ssc" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"> <SOAP-ENV:Body>  <networkStateEvent>   <sequenceNumber>19</sequenceNumber>   <groupName>Local networks</groupName>   <networkName>CS-wired-pass</networkName>   <networkState>AcquiringIpAddress</networkState>   <adapterName>Broadcom NetXtreme Gigabit Ethernet</adapterName>   <serverVerifiedName>ise-2.csint.cz</serverVerifiedName>  </networkStateEvent> </SOAP-ENV:Body></SOAP-ENV:Envelope>
    3912: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1468][comp=SAE]: PORT (3) port: ARP_REQ (portMsg.c 731)
    3913: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1468][comp=SAE]: NET (3) cdiOsIoctlSet: CDI_8023_FRAME_IO_SEND, ifIndex(1), pData(0x024EEB40), dataLen(64) (cimdIo.cpp 2156)
    3914: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1468][comp=SAE]: NET (3)  data follows ... (cimdIo.cpp 2159)
    3915: XTCSSPWA03: 6 10 2013 11:24:44.275 -0100: %NAM-7-DEBUG_MSG: %[tid=1468][comp=SAE]: NET (3)      00 00 00 00 FF FF FF FF  FF FF D4 85 64 B8 43 61     ........ ....d.Ca      08 06 00 01 08 00 06 04  00 01 D4 85 64 B8 43 61     ........ ....d.Ca      0A BE 5F 4A 00 00 00 00  00 00 0A BE 40 01 00 00     .._J.... ....@...      00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00     ........ ........ (cimdIo.cpp 2159)
    3941: XTCSSPWA03: 6 10 2013 11:24:44.290 -0100: %NAM-7-DEBUG_MSG: %[tid=1436][comp=SAE]: NET (3) cdiOsIoctlSet: echo (cimdIo.cpp 2270)
    3942: XTCSSPWA03: 6 10 2013 11:24:44.290 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Ipv4 Connectivity Result: SUCCESS
    3943: XTCSSPWA03: 6 10 2013 11:24:44.290 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: Ipv6 Connectivity Result: FAILURE
    3944: XTCSSPWA03: 6 10 2013 11:24:44.290 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: ACE: adapter SM current: state(STATE_AUTHENTICATED), event(EVENT_IP_CONNECTIVITY)
    3945: XTCSSPWA03: 6 10 2013 11:24:44.290 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: ACE: adapter SM state change: STATE_AUTHENTICATED -> STATE_CONNECTED
    3946: XTCSSPWA03: 6 10 2013 11:24:44.290 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: handleEventAndDoStateTransitionAction action : ACTION_IP_CONNECTIVITY
    3947: XTCSSPWA03: 6 10 2013 11:24:44.290 -0100: %NAM-7-DEBUG_MSG: %[tid=1436][comp=SAE]: NET (0) S_ndisIoControl: returning cached xmitLinkSpeed: 100000000 bps (cimdIo.cpp 3558)
    3948: XTCSSPWA03: 6 10 2013 11:24:44.290 -0100: %NAM-7-DEBUG_MSG: %[tid=1436][comp=SAE]: NET (0) NDIS OID: ifIndex=1 GET OID_GEN_LINK_SPEED(0x10107) datalen=4, cbRW=4 cbNeeded=0 acErr=0 winErr=0 (cimdIo.cpp 3686)
    1: XTCSSPWA03: 6 10 2013 11:24:54.007 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: DllGetClassObject CLSID: {25CBB996-92ED-457E-B28C-4774084BD562} LogLevel=0xF
    2: XTCSSPWA03: 6 10 2013 11:24:54.007 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: GetWrappedDllName: retrieved C:\windows\system32\authui.dll.
    3: XTCSSPWA03: 6 10 2013 11:24:54.022 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: LoadLib({25CBB996-92ED-457E-B28C-4774084BD562}): Attempting to load Dir=C:\windows\system32, FileName=authui.dll
    4: XTCSSPWA03: 6 10 2013 11:24:54.022 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: CredProvider(00000000001FC050) instantiated for CLSID:{25CBB996-92ED-457E-B28C-4774084BD562}
    5: XTCSSPWA03: 6 10 2013 11:24:54.022 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: DllGetClassObject CLSID: {3DD6BEC0-8193-4FFE-AE25-E08E39EA4063} LogLevel=0xF
    6: XTCSSPWA03: 6 10 2013 11:24:54.022 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: GetWrappedDllName: retrieved C:\windows\system32\authui.dll.
    7: XTCSSPWA03: 6 10 2013 11:24:54.022 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: LoadLib({3DD6BEC0-8193-4FFE-AE25-E08E39EA4063}): Attempting to load Dir=C:\windows\system32, FileName=authui.dll
    8: XTCSSPWA03: 6 10 2013 11:24:54.022 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: CredProvider(00000000001FC850) instantiated for CLSID:{3DD6BEC0-8193-4FFE-AE25-E08E39EA4063}
    9: XTCSSPWA03: 6 10 2013 11:24:54.022 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: DllGetClassObject CLSID: {503739D0-4C5E-4CFD-B3BA-D881334F0DF2} LogLevel=0xF
    10: XTCSSPWA03: 6 10 2013 11:24:54.022 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: GetWrappedDllName: retrieved C:\windows\System32\VaultCredProvider.dll.
    11: XTCSSPWA03: 6 10 2013 11:24:54.022 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: LoadLib({503739D0-4C5E-4CFD-B3BA-D881334F0DF2}): Attempting to load Dir=C:\windows\System32, FileName=VaultCredProvider.dll
    12: XTCSSPWA03: 6 10 2013 11:24:54.022 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: CredProvider(00000000003A30B0) instantiated for CLSID:{503739D0-4C5E-4CFD-B3BA-D881334F0DF2}
    13: XTCSSPWA03: 6 10 2013 11:24:54.038 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: DllGetClassObject CLSID: {6F45DC1E-5384-457A-BC13-2CD81B0D28ED} LogLevel=0xF
    14: XTCSSPWA03: 6 10 2013 11:24:54.038 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: GetWrappedDllName: retrieved C:\windows\system32\authui.dll.
    15: XTCSSPWA03: 6 10 2013 11:24:54.038 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: LoadLib({6F45DC1E-5384-457A-BC13-2CD81B0D28ED}): Attempting to load Dir=C:\windows\system32, FileName=authui.dll
    16: XTCSSPWA03: 6 10 2013 11:24:54.038 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: CredProvider(00000000003AF710) instantiated for CLSID:{6F45DC1E-5384-457A-BC13-2CD81B0D28ED}
    17: XTCSSPWA03: 6 10 2013 11:24:54.038 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: DllGetClassObject CLSID: {8BF9A910-A8FF-457F-999F-A5CA10B4A885} LogLevel=0xF
    18: XTCSSPWA03: 6 10 2013 11:24:54.038 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: GetWrappedDllName: retrieved SmartcardCredentialProvider.dll.
    19: XTCSSPWA03: 6 10 2013 11:24:54.038 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: LoadLib({8BF9A910-A8FF-457F-999F-A5CA10B4A885}): Attempting to load Dir=, FileName=SmartcardCredentialProvider.dll
    20: XTCSSPWA03: 6 10 2013 11:24:54.053 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: CredProvider(00000000003B7D70) instantiated for CLSID:{8BF9A910-A8FF-457F-999F-A5CA10B4A885}
    21: XTCSSPWA03: 6 10 2013 11:24:54.053 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: DllGetClassObject CLSID: {94596C7E-3744-41CE-893E-BBF09122F76A} LogLevel=0xF
    22: XTCSSPWA03: 6 10 2013 11:24:54.053 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: GetWrappedDllName: retrieved SmartcardCredentialProvider.dll.
    23: XTCSSPWA03: 6 10 2013 11:24:54.053 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: LoadLib({94596C7E-3744-41CE-893E-BBF09122F76A}): Attempting to load Dir=, FileName=SmartcardCredentialProvider.dll
    24: XTCSSPWA03: 6 10 2013 11:24:54.053 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: CredProvider(00000000003C03D0) instantiated for CLSID:{94596C7E-3744-41CE-893E-BBF09122F76A}
    25: XTCSSPWA03: 6 10 2013 11:24:54.053 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: DllGetClassObject CLSID: {AC3AC249-E820-4343-A65B-377AC634DC09} LogLevel=0xF
    26: XTCSSPWA03: 6 10 2013 11:24:54.053 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: GetWrappedDllName: retrieved C:\windows\System32\BioCredProv.dll.
    27: XTCSSPWA03: 6 10 2013 11:24:54.053 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: LoadLib({AC3AC249-E820-4343-A65B-377AC634DC09}): Attempting to load Dir=C:\windows\System32, FileName=BioCredProv.dll
    28: XTCSSPWA03: 6 10 2013 11:24:54.069 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: CredProvider(00000000003CABC0) instantiated for CLSID:{AC3AC249-E820-4343-A65B-377AC634DC09}
    29: XTCSSPWA03: 6 10 2013 11:24:54.069 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: DllGetClassObject CLSID: {B12744B8-5BB7-463A-B85E-BB7627E73002} LogLevel=0xF
    30: XTCSSPWA03: 6 10 2013 11:24:54.069 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: CClassFactory(00000000001FFF00)  CreateInstance calling CoCreateInstance on MS password cred prov
    31: XTCSSPWA03: 6 10 2013 11:24:54.069 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: DllGetClassObject CLSID: {6F45DC1E-5384-457A-BC13-2CD81B0D28ED} LogLevel=0xF
    32: XTCSSPWA03: 6 10 2013 11:24:54.069 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: GetWrappedDllName: retrieved C:\windows\system32\authui.dll.
    33: XTCSSPWA03: 6 10 2013 11:24:54.069 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: LoadLib({6F45DC1E-5384-457A-BC13-2CD81B0D28ED}): Attempting to load Dir=C:\windows\system32, FileName=authui.dll
    34: XTCSSPWA03: 6 10 2013 11:24:54.069 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: CredProvider(00000000003D3220) instantiated for CLSID:{6F45DC1E-5384-457A-BC13-2CD81B0D28ED}
    35: XTCSSPWA03: 6 10 2013 11:24:54.069 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: CredProvider(00000000003DB880) instantiated for CLSID:{B12744B8-5BB7-463A-B85E-BB7627E73002}
    36: XTCSSPWA03: 6 10 2013 11:24:54.069 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: DllGetClassObject CLSID: {E74E57B0-6C6D-44D5-9CDA-FB2DF5ED7435} LogLevel=0xF
    37: XTCSSPWA03: 6 10 2013 11:24:54.069 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: GetWrappedDllName: retrieved C:\windows\system32\certCredProvider.dll.
    38: XTCSSPWA03: 6 10 2013 11:24:54.069 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: LoadLib({E74E57B0-6C6D-44D5-9CDA-FB2DF5ED7435}): Attempting to load Dir=C:\windows\system32, FileName=certCredProvider.dll
    39: XTCSSPWA03: 6 10 2013 11:24:54.069 -0100: %NAMCP-7-DEBUG_MSG: %[tid=2680]: CredProvider(00000000003E3EE0) instantiated for CLSID:{E74E57B0-6C6D-44D5-9CDA-FB2DF5ED7435}
    3963: XTCSSPWA03: 6 10 2013 11:24:59.247 -0100: %NAM-7-DEBUG_MSG: %[tid=2460]: SysLib:DBG: .\src\os\win\osAsync_win.c:233: => SL_STATUS_NO_CONNECTION
    3964: XTCSSPWA03: 6 10 2013 11:24:59.247 -0100: %NAM-7-DEBUG_MSG: %[tid=2460]: SysLib:DBG: .\src\ipc\win\ipcPipeBase_win.c:102: => SL_STATUS_NO_CONNECTION
    3965: XTCSSPWA03: 6 10 2013 11:24:59.262 -0100: %NAM-7-DEBUG_MSG: %[tid=2460]: SysLib:DBG: .\src\ipc\win\ipcPipeBase_win.c:194: => SL_STATUS_NO_CONNECTION
    3966: XTCSSPWA03: 6 10 2013 11:24:59.262 -0100: %NAM-7-DEBUG_MSG: %[tid=2460]: SysLib:DBG: .\src\ipc\ipcFuncs.c:105: => SL_STATUS_NO_CONNECTION
    3967: XTCSSPWA03: 6 10 2013 11:24:59.262 -0100: %NAM-7-DEBUG_MSG: %[tid=2460]: CAUGHT: NoConnectionException
    3968: XTCSSPWA03: 6 10 2013 11:24:59.262 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: CoreLib:TRACE: context=acnam, thread join, ThreadImpl.cpp:58, m00585050, err=0(OS_OK), thread_id=2460
    3969: XTCSSPWA03: 6 10 2013 11:24:59.262 -0100: %NAM-7-DEBUG_MSG: %[tid=1436]: CoreLib:TRACE: context=acnam, thread join, ThreadImpl.cpp:58, m00585838, err=0(OS_OK), thread_id=3692
    89: XTCSSPWA03: 6 10 2013 11:25:06.367 -0100: %NAMSSO-7-DEBUG_MSG: %[tid=1228]: ServiceControlHandlerEx:WTS_SESSION_LOGOFF, Session ID: 1
    If we do not change VLAN from machine to user, it works just fine.
    Have anybody seen this problem? Have anybody fixed it?
    Thanx, Martin

    Hi,
    unfortunately not.
    I have gone through extensive troubleshooting from Microsoft and Cisco sides twice and the result is:
    1) AnyConnect performs EAPol logoff when it detects RDP session termination. So it goes from user to machine authentication
    2) Windows 7 performs RDP session termination when IP address changes due to the change of VLAN (from machine VLAN to user VLAN)
    Cisco claims that AnyConnect behavior is correct and Microsoft claims that they do not want to change this behavior (reset of RDP session).
    I can imagine that Cisco can detect whether RDP session was terminated due to the IP address change or not and do not revert back to machine authentication in such a case.
    In fact there was nobody at Cisco that was willing to listen to me or accept this like something that needs a fix. The only thing you can do is to enable "Extend connection beyond logoff". AnyConnect does not send EAPol logoff if it detects RDP session termination and you can establish another RDP session which does not fail and you stay connected with RDP.
    Martin

  • Windows 8.1 problem with 5Ghz WIFI

    Hello,
    Since a little while, we have a new wireless ADSL router with 5Ghz Wifi (and 2.4 as well), it came with our new Internet connection.
    However, the 5Ghz WIFI works for a while, and then it stops working, most of the time I can still see the SSID, but the connection is limited. Once in a while the SSID totally disappears and I can only see the 2.4Hgz one anymore. So at first I suspected
    the router was the problem and I reset it to factory settings. Seemed to work for a little while, but then the problems returned.
    Then I noticed the problem was only occuring on my 2 Windows machines (Windows 8.1 and Windows 8). On my Windows phone, the 5Ghz WIFI works just fine. I checked this at the time that I couldn't surf anymore on 5Ghz WIFI on the Windows tablet and laptop,
    and at the same moment on the Windows 8.1 phone it was still working fine.
    So I googled, and found that I should replace the drivers with the Windows 7 drivers. Also that seemed to work for a short while, but now problems have returned. I checked the drivers in the Device Manager, and they are still the correct Windows 7 drivers
    from Atheros.
    What could this be? the 2.4Ghz WIFI always works just fine on any machine, it's just the 5Ghz.
    I have dual boot with Android on my tablet, and I haven't noticed any problems there.
    Thanks!

    On Mon, 21 Jul 2014 10:07:52 +0000, Kimberley1984 wrote:
    >Since a little while, we have a new wireless ADSL router with 5Ghz Wifi (and 2.4 as well), it came with our new Internet connection.
    >
    >However, the 5Ghz WIFI works for a while, and then it stops working, most of the time I can still see the SSID, but the connection is limited. Once in a while the SSID totally disappears and I can only see the 2.4Hgz one anymore. So at first I suspected
    the router was the problem and I reset it to factory settings. Seemed to work for a little while, but then the problems returned.
    >
    >Then I noticed the problem was only occuring on my 2 Windows machines (Windows 8.1 and Windows 8). On my Windows phone, the 5Ghz WIFI works just fine. I checked this at the time that I couldn't surf anymore on 5Ghz WIFI on the Windows tablet and
    laptop, and at the same moment on the Windows 8.1 phone it was still working fine.
    >
    >So I googled, and found that I should replace the drivers with the Windows 7 drivers. Also that seemed to work for a short while, but now problems have returned. I checked the drivers in the Device Manager, and they are still the correct Windows 7
    drivers from Atheros.
    >
    >What could this be? the 2.4Ghz WIFI always works just fine on any machine, it's just the 5Ghz.
      You mention Atheros - do both machines have Atheros wireless? What brand/model
    Windows computers?
     This sounds very much like the problem folks with new Surface Pro 3's are
    experiencing. Please post some details - also which router?
    -- Barb Bowman

  • Wireless printing - problem with MAC integration

    Hi everybody.
    Just bought a Macbook pro and cannot get it to recognize my printer.
    Devices within network:
    - Belkin WLAN Router
    - HP Laserjet CM1312 multifunctional printer - with HP 2101nw wireless G (printing and even scanning works fine wireless!)
    - Acer Notebook with XP Home (used to set up the 2101 wireless)
    - Acer Netbook with XP Home (added later to network, no problem with printing, setup took 5 min)
    Antivirus software: Avira Premium Security Suite on both XP's
    WPA-PSK encryption, no mac filtering.
    The Macbook can access internet, but nothing happens when I try to print. I wanted to stop the hassle that Windows is causing occasionally. Frustrating experience with the Mac so far.
    Can anybody help?
    This question was solved.
    View Solution.

    I have removed the printer, and added again - a couple of times. I was not sure what protocol to chose (LPD, IPP, Socket). 
    I took your advice and tried, but with the right click (ctrl pressed), nothing happens. The normal window for the print queue opens, and I cannot select anything like "Reset Printing System".
    This does not work either, no Printer with "Bonjour" is offered for selection: 
    "Select the plus sign to re-add it. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it."
    When I select the plus sign, I can only make settings in the "IP" area. Standard, Fax and Windows have nothing to select or to put in. "IP" offers Protocol to select and Address to fill in. I put in 192.168.2.6 and tried the different protocols. "Print with" offers generic PostScript printer, Generic PCL Laser printer, "other" and printer software - thats where I selected the driver for the cm1312
    Can you tell what I did wrong? Thanks for trying

Maybe you are looking for

  • Installing SSD in W520

    Just got a W520 with the 500gb HDD with the intention of switching it out for a SSD. My question is what is the best way to install it with the factory settings? Ive been reading that I can burn the recovery drive to a DVD and boot from that but when

  • Error in KSPI

    Dear All, I have definedu2019 u20184 activities in our production (one Production Cost Center) scenario and we have four overhead cost centers [viz, Manufacturing OH (EE04304000), Admin OH (EE04309000), Factory OH (EE04307000) and Other OH (EE0430800

  • MS explorer compatibility

    I created a website in iWeb 09. It runs fantastic on my local drive on safari, ff, chrome, but not on IE7. Navigation buttons are gone. This is really frustrating. What do I need, is Apple coming with an update?

  • Export whole database with all stored data

    how can i export the whole database with all tables, sequences, views etc to a textfile and then import it again? it should contain all availabe data. thank you.

  • SU25 step 2: tcodes from MENU or from S_TCODE

    Hi all, I am using SU25 step 2 a,b,c,d to migrate roles (3.1 to 4.6). The main logic of SU25 step 2 is that table USOBT_C is used to insert new auth values. To do this, transaction codes are used to SELECT entries from USOBT_C. Now the dilemma: which