Windows 7 won't boot without optical drive (SSD, Dual HD)

I recently purchased an SSD and an optical drive HD caddy so I could use two HDs on my macbook pro. I installed the SSD in the normal HD slot in order to install Windows via optical drive. When I move my SSD over to the optical drive slot, Windows hangs on a black screen before the Windows logo and never boots. I tried moving the SSD back to the main HD slot but without the optical drive installed, the same symptoms occur - no boot. This leads me to believe that Windows will not boot without the optical drive (which was present during installation).
Perhaps this is a problem with primary/slave drive settings? I learned today that the intel chipsets in macbooks do not have BIOS for Windows and do not allow you to access the EFI. Not sure if that would help anyways.
Has anyone experienced this and/or have a solution?

I am suffering the same issue. Macbook pro 15 inch late 2009 with 8gig ram. I have a 256gb ssd newly installed, a dead superdrive (thanks a bunch for the drop in build quality without the drop in price apple) and an optibay caddy which i intend on having my 500gb 7200rpm previous HDD installed in. I had the normal annoying issues trying to get bootcamp working with an external optical drive. I then had the bright idea of taking my external optical drive case apart and discovered its a sata drive with a sata to usb convertor attached. Got bootcamp/win7 installed fine using the superdrives sata connector with the optical drive (essentially having a temporary internal optical drive again).
OSX and windows function fine as long as the optical drive stays connected. There does not need to be a disc in the drive, i thought windows might be getting boot info from the win disc. Osx boots fine if its just the ssd. Windows hangs with a white screen right at the beginning. Also doesnt boot using boot menu via alt key. Nor using the reEFIt boot menu (installed later now deleted).
Disk utility says it cannot repair the windows partition and says to back up the data and reformat the drive. This also happens if i use a normal sata drive. I am attempting a few more ideas but at this rate i will be virtual machining windows instead. Far from ideal but seeing as my windows pc is now officially no more and there are two pc only programs i need to use for university i dont have much choice i NEED windows. Anyone got a bright idea that may help?

Similar Messages

Installation of Master Collection CS3 (disc version for Windows) on a laptop without optical drive

Installation of Master Collection CS3 (disc version for Windows) - is there any possibility of installing my legitimately purchased MC-CS3 on a new laptop without optical drive? Perhaps through a download link or will tranfering all Adobe files from my old to my new computer do the trick as well? Or do I necessarily have to buy an external optical drive? Thank you for answering.

No need to buy an optical drive and don't try transferring, it rarely works.
Download the installer from Download CS3 products
Install then enter your serial number to license it.

New E540 won't boot from optical drive

Hello!
I just bought a Lenovo ThinkPad Edge E540 and I have no interest in Windows 8 nor the HDD the laptop came with. I replaced the original HDD with a Samsung 250 gb SSD and now I want to install it with a fresh Windows 7 which I already had laying around.
My issue is that I can't get the DVD-reader to boot into the disc. I get to a Boot Menu where I can choose between a few alternatives, one being the CD0. When I select it and hit Enter the screen goes black for a few seconds and then returns me back to the Boot Menu. I have tried this with 2 different Windows 7 discs, which I have also tested in my desktop pc to ensure they work correctly. The same thing also happens when I choose "Windows Boot Manager" or the empty new SSD.
I tried setting the optical drive to the first boot order in the BIOS but with no result.
What am I doing wrong? halp.

Is the Leopard disk you're trying to boot from a full retail install disk or a gray install disk? If it's a gray install disk from another Mac that would cause the problems that you're describing. It has to be for the exact same model as yours to have the correct drivers on it. A full retail install disk has the drivers for every Mac on it.

K9A2 Platinum-Won't boot from optical drives

My problem is that I can't get my computer to boot from either optical drive.Both drives work; I can read and write from either drive in windows xp. In the boot order menu neither drive is shown as a boot from device.The boot sequence menu shows all hdd and usb devices but no optical drives.Both drives are recognized in the bios.I wanted to dual boot vista x64 but can't because it won't boot from drive.Any ideas?
QuadCore AMD Phenom Black Edition 9850, 2500 MHz (12.5 x 200) MSI K9A2 Platinum (MS-7376) OCZ Reaper HPC OCZ2RPR10662G 2 GB DDR2-800 DDR2 SDRAM ATI Radeon X1800 GTO (256 MB) WDC WD2500KS-00MJB0 (232 GB, IDE)WDC WD5000AAKS-00A7B0 (465 GB, IDE) Microsoft Windows xp SP 3 Cooler Master 650W+3.3V@28A,+5V@30A,+12V1@18A,+12V2@18A,[email protected], [email protected]

Create a signature with PC components and PSU specs.
Example of PSU specs: Corsair VX450W, +3.3V~20A, +5V~20A, +12V~33A
To create signature:
Click on PROFILE above (near top of this page) and then in your "Profile", what I show in red below under "Modify Profile", scroll down to "Signature" and enter your specs in the box and then click on "Change profile" button on the bottom.
Profile Info
Summary
Show Stats
Show Posts
Modify Profile
Account Related Settings
Forum Profile Information
Look and Layout Preferences
Notifications and Email
Personal Message Options

Windows Won't Boot With USB Drives Attached

I just installed Windows 7 on my Mac mini but it won't boot into Windows automatically if there are USB drives attached. I have to hold down the option key at boot time and select the Windows partition manually for it to boot, unless I remove the USB drives first, then it will boot into Windows on its own. Does anyone know how to fix this annoying problem?

Sounds like your mini is set to boot order: boot from USB first.
On a PC you could go into BIOS and change boot order and enable/disable USB booting.
Not sure why or what is on the USB bus, type of drive and device that could also make a difference (and not be universal to the Mini)

IMac G5 Won't Boot and Optical Drive Won't Read Correctly

I have an iMac G5 17" 2.0GHz with a 300GB SATA drive installed about 6 months ago. Everything was fine until it recently ceased booting completely--it gets to the blue screen but the progress bar never even begins and there it sits. The fans come on fast and loud almost right away. The hard drive reads in the System Profiler, but doesn't show up at all in the Disk Utility; Disk Warrior 4 replaced the directory with ease and it appears on the desktop in TDM. It will not under any circumstances boot from a Mac OS X system disk, but will boot from the Disk Warrior and TechTool CDs. As a sidebar, the optical drive is making all sorts of loud unusual noises and reads only as a CD-ROM in the System Profiler (in the Disc Burning Tab nothing appears) even though it is a superdrive. 10.4.9 installed.

If you have AppleCare, suggest that you contact them and/or their Online Chat Support.
Also, see if your computer qualifies for one of the G5 iMac Repair Programs
**WARNING: DUE TO SECURITY REASONS, PLEASE DO NOT POST YOUR COMPUTER'S SERIAL NUMBER ON THESE MESSAGE BOARDS.**

Install disk won't boot -- strange optical drive error

Hi all,
I have a very strange problem with my install disk. Some background:
-I have two separate install disks, one burned several months ago and one burned fresh today. Both are dual-arch netinstalls.
-The old disk worked perfectly at least twice on my old machine.
-Both disks behave identically as far as I can tell. I only made a new one because I thought the old one may have been scratched when it didn't work.
So, I just finished a new rig today, and as I planned a dualboot for it, I installed Windows first (because we all know how nice the Windows installer is to pre-existing OSes). That ran fine: I'm making this post from that installation. One of the first things I did after the install finished was put in a music CD, which also worked fine. When I tried to install Arch, though, I get a mysterious I/O buffer error (which, unfortunately, I can't paste because I have no way to extract a log or copy the output). It says something about an unhandled sense code. I've googled all over and the unanimous consensus is a borked optical drive, but I know that isn't the case because it has operated normally for other data disks (Windows install) and for the music CD I've had in there for about half an hour. My next guess would be a borked CD, but both function normally on other machines.
Any ideas?

Try a new iso for your new machine, perhaps your machine has hardware not covered by a 14 month old kernel.
http://releng.archlinux.org/isos/

Upgrading to SSD! But windows won't boot after copying drive.

I recently bought the great HP TM2t 2100 with all the bells and whistles along with an Intel x25m 120gb SSD (and Apricorn housing to use the old HDD as a backup drive.)
I followed all of the steps on the ez gig III software and copied the hard drive to the ssd without any errors. When I physically install the ssd (very easy!) and turn on the computer it says that Windows cannot be recovered. And will not boot windows. I did make Device Recovery discs but those are not able to be read either. Any suggestions on this? I have been trying to find an answer to no avail.
In the mean time I reinstalled the HDD and will try again after updrating all the drivers.

Well, I couldn't get the copied SSD to work, but as of right now I'm using the repair disks to restore windows to factory settings, the comp is only a weekend old and has no files of importance on it so I think this will be the best way. I will report my findings.

Can I install Windows without optical Driver

Hi!
I have a Macbook pro Early 2008 - MB134LL/A but its optical driver cannot read any disc. Now I want to install Windows via BootCamp but it cannot. Anybody know how can I install Windows without optical Driver? I tried to boot by USBflash, USB DVD Driver but it cannot boot.
I think that does external optical drivers via firewire work?
Thanks alot!

Thank you for your reply, and the information. This is what I came up with:
I added the strings as instructed, however when I went to sign the script in terminal, I was told:
/Applications/Utilities/Boot Camp Assistant.app: replacing existing signature
/Applications/Utilities/Boot Camp Assistant.app: code object is not signed at all
In subcomponent: /Applications/Utilities/Boot Camp Assistant.app/Contents/info.plist
Also, here are screen captures of the lines that I added. Mine are the top string entries:
Thank you for your help, thus far!

Windows 8.1 Pro won't boot without USB Stick

Please HELP! I bought a Thinkpad e555 without OS, created installation media for Windows 8.1 in a 64Gb USB stick. When the installation was finalized, I followed the instruction of removing the stick after restarting. After powered on, black screen for hours. Put the usb stick back and Windows booted, finalized the installations and configurations, and started normally. So I started with all of the drivers downloads and installation. So I removed the usb thinking that everthing was ok. But when a restarted it, it wouldn't boot until I restarted it with the usb plugged. Complained with the retailer and sent me a new one. Now I'm trying the installation all over again using a 16Gb USB stick. The same, the OS won't boot without having plugged the USB that I used for installation. What am I doing wrong? Note:NTB LENOVO TP E555 20DH000WGEAMD A8-7100, 4GBx1, 15.6" HD, Black, AMD R5 HD Grafik, 720p CAM, 500GB7200, DVD±RW, RTL bgn+BT, Numpad, No Fingerprint, Akku 6Zellen (48wh), None Preload OS

I have this problem on E455. Both in 8.1 Pro.It was after a driver update, but not sure which one.It doesn't what USB device is attached, just so long as there is one.

Using osx snow leopard with boot camp, optical drive keeps ejecting windows 7 disc

Upgraded my late 2008 macbook pro from leopard to snow leopard. Added the max 4GB of RAM and replaced the working 250GB hard drive with a new 1TB hard drive. Rebooted with time machine from external hard drive. Now tried setting up Bootcamp to add a Windows 7 partition, but the optical drive keeps ejecting the Windows 7 disc after it spins for a few moments. The optical drive will read other discs, just not the Windows 7 disc. How do I fix this problem?

you need to install the new bootcamp drivers from windows. boot into windows, insert the snow leopard DVD, open it and follow the instructions.

IMac G5 education without optical drive, what can I do?

I've just bought on ebay an iMac G5 1,6 Ghz (without isight) with the motherboard dead. It is very easy to open.
What was my surprise to see that there was no optical drive...In fact, it could receive one : the slot is there, the IDE cable too, the sloat-loading hole too, but...it is impossible to introduce any CD or DVD because there is a plastic and metallic band all around that makes it impossible....
As I didn't understand, I made a research on the web anf found out the answer....Incerdible! I didn't know that Apple had made an iMac G5 model for education, without optical drive : from outside, impossible to distinguish it, but when you try to introduce a CD or DVD in the slot, you can't!
So the only solution is to buy an external firewire drive?
I tried to see if it was possible to put out the metallic band to free the access for one CD, but it seems impossible! The metallic piece is riveted, or something like that....
Does anyone has tried something?
Thanks, I apologize if my english is not very good

I've just bought on ebay an iMac G5 1,6 Ghz (without isight) with the motherboard dead.
I assume you managed to fix that "motherboard dead" problem, since there would be no point in installing an optical drive in a Mac that does not work.
If you can't get the slot open because it is intentionally closed, maybe you can get an external optical drive and stick something else into that internal space. For example, will it fit a 2.5-inch (laptop size) IDE hard drive for additional internal storage? Or you can get an IDE-to-compact-flash adapter card and give your iMac a solid state flash drive (like MacBook Air); CF cards are getting pretty cheap, even at the 16GB size, and you can get even larger ones for a higher price. Maybe you can even boot from it.
Just some ideas...

Boris 3D text editing window won't open without deleting FCP preferences

So, in my FCP7 projects, the Boris 3D text editing window won't open without deleting FCP preferences first. I've tried new projects, old projects, open all new windows on top settings. Once I delete the preferences, viola, opens right up. I can rebuild my preferences and after just a few days it won't open again... without preference delete.
I'm on a Macbook Pro 17'" i7 and do most of my editing on a 27" Apple Cinema Display. This is the only reason I could come up with. However I did some editing from the Macbook's screen and after 1 day, the Boris 3D editing window again refused to open. I have no idea. Is this is a known bug, etc.?
Help!

With Final Cut not running, trash the Boris Title 3D preference file.
/Library/Preferences/Title 3D Preferences
Also, you could have a corrupt or duplicate font file. Open FontBook and check it out.

Windows won't boot with Virtualization Techonology enabled

My Windows won't boot if I enable Virtualization Technology. I've read the other forums and have tried to both disable and update the Bluetooh and Wifi drivers before enabling virtualization again but that's not working. I've also updated the Bios but that doesn't work either.
Laptop: HP Envy TouchScreen 15-j052nr
OS: Windows 8.1 (64bit)
Bios: F.63 (I've tried F.65 A)

Hi @thyPot ,
I saw your post regarding the problem with the Virtualization. If you have already tried disabling and updating the drivers then give us call for further options. You can reach HP Total Care at 1-800-474-6836 in North America or start here if you live outside of North America.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Per Adobe website, a download for Acrobat 9 for Mac is "not available." What alternative does Adobe offer to those who have bought and paid for Acrobat and now have computers without optical drive to install that previously purchased software? Buy a PC? B

Per Adobe website, a download for Acrobat 9 for Mac is "not available." What alternative does Adobe offer to those who have bought and paid for Acrobat and now have computers without optical drive to install that previously purchased software? Buy a PC? Buy an external CD drive? Is the answer really "too bad"?

Acrobat 9 for Mac can be downloaded from
Download Adobe CS5 Free Trials – All Direct Links without Akamai | ProDesignTools
Follow the Very Important Instructions on that page first BEFORE you click the download link.

Windows 7 won't boot without optical drive (SSD, Dual HD)

Similar Messages

Maybe you are looking for