Windows 7 won't complete installation (2)

Just received a new Asus M51AD-US001O RTL Desktop system, with a Asus H81M-E motherboard, 8GB DDR3, Windows 7 Home Prem 64-bit, which included a new Asus graphics card with DVI & HDMI ports, & a VGA port. I hooked up the monitor to the VGA port,
pressed the power button. Nothing Happened, Oh the system powered up (all fan etc) but no signal from computer. I ed then hooked a DVI/VGA adapter to the appropriate port, Still no signal, nothing on the monitor. I powered off the system, removed
the Asus graphics card, rehooked the monitor to the VGA port and powered up the system. Wala it worked, well untill I received the boot problem screen, which asked if I wanted to boot normally or into safe mode. I chose safe mode. System
started to move but an error screen appeared saying setup could not continue in safe mode, to restart to resume setup. I hit the OK button to restart - Windows Setup Resuming, then another error appears: (Red Circle with a white X) "The computer
restarted unexpectedly or encountered an unexpected error, Windows cannot proceed. To install windows, click OK to restart the computer and then restart the installation". This just cycles, I hit the OK button and the restarting/reinstallation
begins and then the same error appears. We're caught in a loop. Any suggestions???
Thank you.

Hi,
Sounds like a hardware error, you can reset the BIOS to the default configuration, then check what’s the result.
Alex Zhao
TechNet Community Support

Similar Messages

I downloaded the latest version but it won't complete installation. It says: Verify that you have sufficient privileges to start system. What do I do now?

iTunes stopped working so I uninstalled it. I downloaded the latest version but it won’t complete installation, giving me a message that says: Service ‘Apple Mobile Device’ (Apple Mobile Device’) failed to start. Verify that you have sufficient privileges to start system. Can anyone tell me what to do next? Thank you.

I tried your suggestion, and what I get is this message: "Error 1053 the service did not respond to the start of contro request in a timely fasion." Any further suggestions? Thanks

Photoshop Elements 10 won't complete installation and won't uninstall.

Photoshop Elements 10 won't complete the installation process and it won't uninstall using the uninstall utility (I get an error message). So I tried deleting all files manually. However, when I re-insert Disc #1 it only offers to uninstall Elements 10 - which it won't do (same error message). So I can't go forward (install) or backward (uninstall). My computer is a Dell Studio 1555 with 4 GB of RAM, 64-bit OS, running on Vista Home Premium. I have 180 GB free of 283 GB on the C drive.

Thanks, Your link took me right to it. Baisley 944
Date: Mon, 11 Jun 2012 21:17:48 -0600
From: [email protected]
To: [email protected]
Subject: Photoshop Elements 10 won't complete installation and won't uninstall.
    Re: Photoshop Elements 10 won't complete installation and won't uninstall.
    created by photodrawken in Photoshop Elements - View the full discussion
For some reason, my link to the MS FixIt Center didn't appear in my message:http://support.microsoft.com/fixit/ Ken
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4484771#4484771
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4484771#4484771. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Windows 7 Freezes at "Completing Installation"

So, I was installing windows 7 and everything was going great, fast, etc. Computer had just restarted, blah blah. Windows had said "Upgrading Registry and what not" and then when I got to the "Completing Installation" after about 5 minutes it just freezes, I gave it a good 20 minutes of just sitting there before coming to the conclusion it might be a hardware problem?
Then again, why would I get so far in the installation before it doing that? It was at about the 70% marker.
Btw, I'm upgrading to Windows 7 32bit, I'm running Vista 32bit atm, and Vista is freshly installed after a Hard Drive format about a week ago.
Soes any help would be great, if it matters any deal about my computer specs I'm on:
- AMD 64X Dual Core 3.00ghz.
- GeFORCE XFX 6600 512mb
- Default High Def Sound Card
Running a HP PC, but would have really matter?
Anyway, if anyone has any fixes for this or solutions, suggestions, what ever have you, I'm interested.
And also, I should note that I've tryed installing 3-4 times now with the exact same outcome.
I've tryed just the "Update" option, then after that I tryed the "Custom" option in the installation while it was already booted up.
Would a clean installation be the possible fix? The reason I haven't tred I clean installation is cause I just reinstalled Vista and formatted my hard drive a week ago meaning I'd have to make a 100gig backup of my programs, but if doing a clean sweap would have a 100% success rate, I'm all in.
Oh, one more thing, I first tried writing a CD with a RW DVD but I've tryed with 2 different types as well all going at 2x write speed. I still get the same installation Freeze.

I am glad to say that issue solved! Thanks a lot to all of you from that forum, but key problem solver was a guy Alex from MS Technical support.
The problem has been solved after disabling video card in device manager. I was scared to do that before. I believed that this will lead to “no video” situation since I have only one vide card. In fact that action disabled
only driver.
So the successful installation steps were following:
1.
Minimize comp configuration:
Only 1 HDD;
Only one chip of RAM (4 G in my case);
Only PS2 keyboard;
2.
Optimize HDD as recommended at :
(http://www.sevenforums.com/tutorials/91339-ssd-hdd-optimize-windows-reinstallation.html)
3.
Run complete installation up to the “Completing installation step” freeze.
4.
Activate Computer Manager as described by SheilaP at
http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/7d765b66-17c6-46e8-94e2-dd39b5b504c1?prof=required;
5.
Disable all devices with “!” mark and video card also (even if it doesn’t have “!”, as it was in my case). Continue
the installation.
Again special thanks to :
Bare
Foot Kid from http://www.sevenforums.com;
SheilaP from
http://social.technet.microsoft.com/Forums/en/w7itproinstall/thread/7d765b66-17c6-46e8-94e2-dd39b5b504c1?prof=required;
Alex from MS Technical support.
Sincerely,
Michael

BootCamp Installing Windows 7 Stuck At "Completing Installation"

Hello Community
I have been Trying to Install Windows 7 Home Premium On my Macbook Pro 13" with Lion OS from Bootcamp 4.04 Im Running 10.7.5. I tried this for at least 10 times and its the same cycle over and over again , Everytime i try to Install Windows Everything will be fine until After the computer Restarts When its "Completing Installation" when it Comes back It Continues to "Completing Installation" it will load like this for about 2 minutes then it Freezes the whole computer Hangs cant move anything and the next thing to do is press the power button till it shuts down . Then I Bootcamp back my HDD to 1 Partition and Do the whole Cycle again .
On a Side note , I have installed Windows 7 Home Premium with the same disc on this Mac before , But then my HDD Had some problem sent for apple care got it back and now im trying to get Windows 7 Back again . I've Looked around all night for solutions but nothing seem to have worked and by all night i mean ALL NIGHT till the sun rise and i told myself i better get some rest . If anyone can help me out it would be great I would be ever so greatful
I have tried the plugging in of a keyboard and mouse and keep clicking around , Tried Removing the disc when it Reboots as some say the disc could be affecting the installation , and yes its an Original Windows 7 Home Premium . I have tried Redoing it Normally for about 5 Times . Tried everything that google had to offer so Please someone do help me out Thank you in Advance .

Hi Oscar_G,
Welcome to the Support Communities!
Is your Windows 7 software 64 bit or 32 bit? Boot Camp 5 only supports 64 bit Windows 7.
Did you create the Windows partition using the Boot Camp Assistant?
Below are some resources to troubleshoot the issues you are having installing Windows on your Macbook Pro:
Boot Camp 5: Frequently asked questions
http://support.apple.com/kb/HT5639
Apple - Support - Boot Camp - Get Started
http://www.apple.com/support/bootcamp/getstarted/
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
Boot Camp Installation Manual - see page 6 for Installing Windows
manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_10.8.p df
When you’re asked where to install Windows, select the partition named “BOOTCAMP.”
WARNING: Do not create or delete a partition, or select any other partition. Doing so may delete the entire contents of your OS X partition.
I hope this information helps ...
- Judy

WRT54GC v.2 won't complete installation on Windows XP

Hi everyone, I've tried most troubleshooting suggestions I can find and still can't get my new router to operate. I am a cable modem user on Windows XP and have been using an old Netgear router with no problems for years. I try to install my new router with the setup CD and it never completes. It always confrims my hardware is setup correctly but says my setup utility cant complete setup ... seems like it isnt reading the router connected to my PC. I;ve tried clearing all settings and reconnecting in the correct order but can never get past the setup stage mentioned ... any thoughts?? thnx

1)connect the computer to the router's port#1
2)connect the modem to the router's internet port
3)access the router using http://192.168.1.1 .. the default password is admin
4)on the web ui , click on the "mac add clone" subtab , enable it and click clone
5)save the settings and do a power cycle
6)check whether the internet works or not ..

Boot Camp Won't Complete Installation Of Windows 7

i was trying to install windows 7 ultimate 64bit in my macbook pro (early 2011), but in the process of the installation, its stopped and stay still for a longtime. i was hoping it will get through but didnt. i tried several times but still got the problem. is there any solutions for this?

I've a few questions here:
Is your Windows 7 CD one that you bought at retail (a boxed copy) or one burned from Microsoft's online sources (MS Store, TechNet, etc.-an image known in the trade as Electronic Software Distribution (ESD))? Images from non-official sources, and discs not purchased through reputable sellers, may be incomplete or have other problems.
If an ESD copy, did you follow the instructions given to you for a proper burn?
For both retail and ESD copies, did the DVD include Service Pack 1 (SP1)?
Did you print out, and did you follow, the instructions given in the Boot Camp Installation and Setup Guide?
In particular, there is a step that requires you to format the partition labeled BOOTCAMP as NTFS. If you somehow missed this step, you will be unable to install Windows properly.
Get past these, and we can resume troubleshooting.
Nate

HP Officejet 4630 e-All-In-One - Won't complete installation process?

Hello, we are unable to complete the software installation process and keep receiving the message " HP printer installation failure: error 1603(25042)We have unistalled the partial install twice now and reinstalled without the USB cord connected and each time its stops us and says that it's not connecting to the driver. We have Windows XP which to be compatabile so we are not sure what to do? How do I know if it's my hard drive? Thanks

Hi @Patti_C ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English: http://h30434.www3.hp.com
Spanish: http://h30467.www3.hp.com
French: http://h30478.www3.hp.com
Portuguese: http://h30487.www3.hp.com
German: http://h30492.www3.hp.com
Korean: http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
Thank you for your understanding
I work for HP. However I speak only for myself, not for HP nor anyone else

Tried to update iTunes on Win7 got a MSVCR80.dll error message. Tried to reinstall as advised, won't complete installation saying I have to verify that I have sufficient priveleges. How do I do that?

I just tried to update iTunes, got an error message MSVCR80.dll and was told to reinstall. Tried to reinstall, at the end received this message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services." There is no place to verify anything. Logged in to Apple Store with ID and password. Tried again. Same message!! Help!!

See Troubleshooting issues with iTunes for Windows updates.
tt2

10.8.4 MacBook Pro Retina 15" won't complete installation

Hello I've tried repeatedly to install 10.8.4 from 10.8.3 normally these updates have been error free and straight forward, however this time the restart begins and it will say wait for about 5-6 mins and then an error message consistently says "an unexpected error has occured, please restart your computer" not once has it been different or ever completed. I've tried repairing the disk to no avail.
Does anyone have anyone suggestions?
its been plugged in everytime with 100% battery as well.

Give this a try:
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
After this is completed download and install 10.8.4 Mountain Lion Update v10.8.4 (Combo).

Won't complete installation

Fire fox 3.6.8
32-bit operating system
Vista
Flash player 10
I have downloaded it and it shows up in the Control panel/Programme.
There does not seem to be next to it on the right side any size of the download no MB size.
It hasn't appeared on my desktop as a short cut and when I go to camtasia to play a video it states
The Camtasia Studio video content presented here requires a more recent version of the Adobe Flash Player. If you are using a browser with JavaScript disabled please enable it now. Otherwise, please update your version of the free Flash Player
I have downloaded it. There seems to be a slight hitch in the final process.
Oh, and java script is activated.
Hope someone can help.
jenki1

Hi,
When I try to upload a video and click on url this is when I get the
flash needs updating.
http://vidgoog.s3.amazonaws.com/videos/videos/adplanner/adplanner.html
Thanks,
Ian

HT4914 I suscribed to itunes match, but it won't complete step 3, and just keeps cycling through steps 1 and 2. Help!

I suscribed to itunes match, but it won't complete installation, keeps cycling through steps 1 and 2. Help!

suavedog:
Try this:
iTunes 7.2 for Windows doesn't open

I'm unable to complete installation of Firefox 7 on Windows 7 as it keeps asking to reboot to finish and never does finish the installation.

I'm in need of some assistance please.
I installed Mozilla Firefox 7 yesterday but it has failed to install properly. It keeps asking me to reboot to complete installation but never finishes. I've tried without success to un-install it but it won't un-install either because it never finished installing. I've done a system restore to prior to the install but still have the same problem. I'm at a loss on what to do now. I'd like to fix this without having to format my hard drive or reinstall Windows 7. I've since also tried downloading via a mirror site and installing an earlier version (6.02) but as V7 hasn't finished installing I get stuck with the boot error which reads 'Your computer must be restarted to complete a previous version of Firefox. Do you want to do that now?' I've done that at least 10 times with no success.

You gone about it the wrong way I'm afraid. For future reference; to update version 4.0 to 4.0.1 and for future editions, go to '''Help '''| '''About Firefox''' and then click the '''Check For Updates''' button.
I think what you'll have to do now is follow instructions in this article to uninstall it: http://kb.mozillazine.org/Uninstalling_firefox
Once you've achieved that goal, go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file to the desktop using either IE8 or 9. Save the file to your desktop when you see the prompt and then reinstall it from there.

Windows 7 not completing installation via Boot Camp

Hi everyone,
I'm having a devil of a time installing Windows 7 on my 27" Late 2010 iMac. I'm using the latest version of Bootcamp and a brand new copy of Windows 7. I'm following all the Boot Camp instructions, create the partition (I want at least 150gb), insert the Windows 7 disk and install Windows 7. I choose the partition, format it, then click install. It goes through all the installation steps up until "Completing Installation...", where it will hang.
I've tried now installing Windows seven times. I've redone the partition. I read somewhere that it could be hanging on usb drivers. While I don't have an Apple mouse, I've tried installing it with just my Apple branded keyboard and it still won't install. I've defragged my hard drive, still hangs. I've crossed my fingers. I've cursed at it. Nothing seems to work.
Does anyone know what could be preventing the in

The Elite Technician wrote:
It is the Windows 7 64-bit disc that came with my Dell a while back, but I no longer have that Dell. I have also tried using my Vista Ultimate 64-bit disc and my Windows XP Pro SP3 disc, but none of these worked. Same result - white screen. All of these discs came with my previous PC computers that I used to have, but I no longer have those PCs. Only their discs. Is using discs that came with other computers for those computers the problem? Do I have to use a Windows disc that has not been used before?
Message was edited by: The Elite Technician
The disks that come with PCs most often include only the drivers and applications required by the PC they were made for. You can not use these disks to install on other than the original hardware.
Message was edited by: BobTheFisherman

Java_es_05q1-windows-x86 install fails 1628: Failed to complete installation on windows xp pro sp2

Hi All,
I'm trying to install Java ES 2005Q1 on my windows xp pro sp2 notebook, but it always breaks with this error message: 1628: Failed to complete installation
I realized that the SUNJavaES.log always ends at line 151 which is 131077 characters long.
These are the last few characters of this line: ..." AD_MANUAL_ES_CONSOLE_HELP=D:\Sun\JES2005Q1\Server-Root\manua l\es\console\help\ AD_MANUAL_FR_ADMIN=D:\Sun\JES2005Q1\Server-Root\manual\fr\ad min\ AD_MANUAL_FR_ADMIN_HELP=D:\Sun\JES2005Q1\Serve "
I attached the last log file.
This line always breaks at the 131077th char independently of the content of it. I tried to skip some components of JES to see what will occur. The current content of this line obviously was different, but it has broken at the same point.
Thanks in advence for any help.

This could be due to a known issue with length of installation path
Can you try and install in a location with less than 8 characters ?
eg: C:\JES05q1 or C:\Sun

Windows 7 won't complete installation (2)

Similar Messages

Maybe you are looking for