Windows 7 wont start, only get bluescreen

Hello I have a problem
I have Windows 7 64bit
For a game I needed to change my processor limit to one so the game wont have graphic problems, I changed it and rebooted my computer after that I had to options if i chose the option to start windows normally it loads for a while like always then the blue screen of death apears and my computer restarts if I chose let windows fix problems. It tries to fix them but with no sucess and my computer restarts again.
I think that the problem is that my computer now doesnt have enough RAM memory to start up since it needs 2 GB. I thought I could start it up in safe mode but I dont know how to do it. BIOS doesnt help much.
Anyone know a soloution?

Hi,
Do you remember making any recent changes to the computer prior to this issue?
I would suggest you to follow the steps in the link and check if the issue persists:
[http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7|http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7]
Also check event viewer for error follow the steps in the link:
[http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer|http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer]
Hope this information helps you.

Similar Messages

  • My hp pavilion 7955 wont start only a beep

    my hp 7955 worked for a few days after 2 years without use. First time after that it worked after I shook it a few times , now it wont start only prolong beep. fan and hd fan working ok

    my hp pavilion 7955 at first had a beep then change memory card downloaded sp pack 3 now it starts then stops

  • Windows wont start, Recovery Disk asking for another disk, only can with 2

    My son was surfing the web when IE stopped responding.  Window would not close so he held the power button until the laptop shut off.  When he tried to start laptop again, could only get as far as the windows loading bar, but it would not load.  After unsuccessfully trying a StartUp Repair we used the Recovery & Application Disk, holding down the C. After it appeared to run succesfully we got a boot manager missing error.  So we tried the Recovery Disk again.  Now it just continues to ask for additional disk but the Recovery Disk set is only two disk set.  This is a L305-s5875 Satellite that we have had for about 11 months.  If anyone has any suggestions we would greatly appreciate it. 

    Try cleaning disk with alcohol,with soft tissue paper.That is what i did to get disk to work.
    Also try and hit start and F12 and then change boot menue to Cd/Dvd insted of hardrive
    and then hold down c or try without holding down ckey.As a last try start cimputer and hold
    gown the statr buton and 0 (ie zero)  together for 1 min and see what happens.
           Yours trily ,
                Alex
    P.S.Good luck

  • Exporting in windows media format - only get 30 seconds!

    I am trying to export a HDV film into windows media format for my client. They want the film to be 320 x 180, in windows media format and under 10mb, for use on their website.
    The film is 3 1/2 minutes long, but when I try and export using quicktime conversion and then select windows media. I have tried fiddling with some of the settings but it keeps just doing 30 seconds of the film. What am I doing wrong? What settings should I be using?
    Please help me,
    Thank you,
    Tom

    IMO, Flip4Mac Studio is a much better product than Visual Hub. Both cost money, but better feature set within F4M. As you experienced, you can only get 1/2 the duration of exports, up to a limit of 30 seconds, in trial mode.
    If you want the studio version, go to your WMV preferences and click on the upgrade tab.

  • (2) Lenovo B575 Windows wont start

    bought lenovo b575 last week in Bestbuy as a gift for my father-in-law. Since it was on sale, I decided to get one for my self too. Both laptops were working the way they suppose to work until yesterday, mine turns on but  windows wont open, and then i recieved a call from my father-in-law saying the same thing happen to his laptop..
    Any idea? Is this a common problem w/ lenovo?  Not even a week old from the date  purchased...Should I call Lenovo or Bestbuy w/ this kind of issue?
    Thanks
    arvzs1

    Hi
    Welcome To Lenovo Community
    I would recommend to contact Lenovo support , they will help in getting this fixed
    Hope This Helps
    Cheers!!!

  • Hp pavillion windows wont start

    Hi..Thank you for responding...i'm not concerned with anything that is on thecomputer as i'm willing to start over. i'm really hoping just to get it going in decent condition. i remembered also i used tweaking.com just before last good startup and i noticed when it was running repair on all the hkey user..hkey current user etc..it said failed wildcard..i hope that helps..thank you

    Hi 1rooby2,
    As I understand you would like to perform HP System Recovery on your unit, based on the previous forum post I find you have a HP Pavilion dv5 notebook with Windows Vista Operating System. Please click on the web link given below should be able to help you to resolve the issue on your unit. 
    Performing an HP System Recovery (Windows Vista)
    Please follow the steps under “Starting a recovery from the hard drive and the computer is off”.
    If in case you are unable to perform these steps the only option is to perform HP System Recovery on your unit using HP Recovery Disc (Either created by you or Purchased from HP). To perform the recovery from Recovery Disc please follow the steps under “Starting the recovery from recovery discs” from above document.
    If in case you do not have the Recovery Disc you can order the same by click here and follow steps mentioned under “Ordering a recovery kit from HP in the United States and Canada”.
    For any further assistance please feel free to contact HP using below details.
    If you live in the US, contact HP Here.
    If you are in another part of the world, start Here.
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    *Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    * Click on "Purple Thumbs up" button to the left side of my post to say thanks!
    Regards
    Ahmed

  • I Tunes for WIndows wont start after upgrade to 8.0.1

    I recently upgraded to iTunes 8.0.1.11. After upgrade, if for some reason I need to reboot my computer iTunes will not start. It took forever to finally figure out what it was. I couldn't sync my iPod, could not get on to iTunes , etc. I finally had to try to uninstall Bonjour to make it come up. The problem is that I can never fully uninstall Bonjour. It says I do not have sufficient privileges. It will be ok until I have to reboot again or turn off my computer. I then have to try to uninstall bonjour to make it come up again. Is there a fix for this bug so I don't have to go through the same procedure every time I reboot?

    As far as the sufficient privileges go.
    You may wish to temporarily disable User Access Control (UAC)
    This should then give you permission to complete the uninstall process like you have been doing. Also ensure you are an Administrator user on the account. That right away will cause the message to appear if you are not.
    You want to ensure this gets turned back on if you do not have adequate security protection such as
    -Firewall Software
    -Anti Virus Software
    -Spyware/Adaware Software
    To Turn UAC off in the easiest way possible
    -Launch Control Panel
    -Launch User Accounts
    In this Window you will see an option called "Turn User Access Control ON/OFF" Click on this. A simple pop up window will appear. If it has a check mark in the box. Un-check it. Reboot. UAC is now off.
    Windows security will notify you of this. Feel free to ignore it while you try to uninstall again. Repeat the steps above to turn it back on when you are ready.
    By any chance have you tried a Basic Uninstall of Apple Software? and then Run the iTunes Setup file in Administrator Mode?

  • PowerMac wont start up - Gets to Apple screen then goes black

    Recently my 2.5Ghz DP PowerMac G5 has been behaving badly and now it appears to have died!
    On startup it gets to the grey background with the Apple then nothing. No spinning gear and no Hard Drive activity from the Mac. After switching off and trying again not even the Apple screen comes up I just get a black screen. If I leave it a while then try again I get the Apple screen again but nothing else.
    Tried starting up in 'Safe Mode' with shift pressed but using wireless keyboard and mouse wasn't sure if keyboard is recognised until Mac has fully booted. Tried switching to conventinal wired keyboard and mouse but still nothing - it's as if the keyboard isn't being found as the light on the Caps lock doesn't work while attemping a boot up. Does it matter where the keyboard is plugged in? Mac or monitor?
    I can only think to take it in to Apple for repair but if anyone has any suggestions or ideas I would be very grateful!

    Hi-
    The 2.5GHz machine is liquid cooled.
    Open up the tower, and look for signs of leakage:
    http://www.fusina.net/G5coolantleaks/gallery.php
    http://www.fusina.net/G5coolantleaks/index.php?lg=uk
    http://www.youtube.com/watch?v=ZDyIIFyUpGI
    http://www.xlr8yourmac.com/systems/G5coolantleaks.html
    http://www.macintouch.com/readerreports/powermacg5/topic4243.html
    http://www.macsimumnews.com/index.php/archive/macosgliquidcooled_power_mac_g5sleaking

  • Windows wont start?

    Hello i was wonderin if anyone can help me, when Windows XP tries to load, I get the following message: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this." My options are:
    Start in safe mode.
    Safe mode with networking.
    Safe mode with command prompt.
    Last known good configuration setting (most recent setting that worked).
    Start Windows normally.
    I cant use my laptop. I have no idea what happened, i was just working on microsoft excel and the laptop just knocked itself off. Sometimes when i try to restart it again windows loads to a certain point but then knocks itself back off again. I have an up to date norton 07 and spyware detector.
    Can anyone help?

    When i select any of the options it loads for a few seconds and then knocks off again so i cant access windows at all. The prblem is that there is stuff on the hard drive that i need. I was given a disc 'knoppix' a linux os that runs directly from the disc and was told i might be able to run this dvd on my own laptop and connect it to another laptop to save the files i need onto that one before reinstalling windows.
    Do you know how to do this?

  • Windows wont start up

    Hi,
    Just bought a new Imac in the last week and am already having trouble getting Windows 7 (which installed perfectly on my '08 Macbook) to get going.
    I install everything without any problem at all, during the install the Mac restarts a few times - no problem. The issue is, once the install is finished (when i have just set the time and date ready to begin) Windows says 'Welcome' and then 'Shutting Down'... I assume ready for one final restart. When it loads back up it says "press any key to boot from disc" which i leave for it to boot straight into Windows. But it doesn't. It does nothing. Even if i try to press a key to go back in to the disc it does nothing. If i manually reboot using the option key and try loading windows it will just sit there with a flashing underscore on the same black screen. (I seem to remember it doing this for a while the first time i booted windows on my macbook, with the exception, this one never loads)
    I though my problem was to do with my bluetooth keyboard/ mouse not doing anything due to the lack of drivers but i've tried with a USB keyboard and mouse to no avail.
    On my 3rd install now and it's getting a little frustrating. Any suggestions?
    Thanks,
    Martyn

    Hooray! For anyone that has this problem too, here's the solution that worked for me:
    Solution 3:
    If you applied solution 2 and you still have problems, try the steps below.
    Solution 2 will make the Windows 7 DVD have the option "Repair your computer" for those who can't see it.
    Repair startup issues
    1. Put the Windows 7 installation disc in the disc drive, and then start your computer.
    2. Press a key when you are prompted.
    3. Select a language, a time, a currency, a keyboard or an input method, and then 4. click Next.
    5. Click Repair your computer.
    6. Click the operating system that you want to repair, and then click Next.
    7.In the System Recovery Options dialog box, click Command Prompt.
    Type (these commands are safe - more information)
    Code: Bootrec.exe /FixMbr
    Code: Bootrec.exe /FixBoot
    Code: Bootrec.exe /RebuildBcd
    Press ENTER after each command.
    Restart your computer.
    That should do the trick! However if you still can't start Windows, then follow step 1 to 6 again and type these commands.

  • My Satellite L505D-S5992 Windows wont Start

    Windows will not start, Runs Startup Repair, but says that it cannot automatically fix the problem.

    Satellite L505D-S5992 
    Runs Startup Repair, but says that it cannot automatically fix the problem.
    Does that mean you have access to the Windows Recovery Environment?
    If so, open a command prompt, run this, and let us know what message you get.
       bootrec /scanos
    -Jerry

  • Did PC Recovery and Dowloaded iTunes, wont open, only get error reports.

    I just did a PC recovery and have all of my music from iTunes backed up on a dock drive. I just re-downloaded iTunes and installed it. iTunes won't open, I just get an error report every time. I clicked on the setup file and tried to repair it. I've uninstalled it and redownloaded it. Still the same result. Does anyone have any ideas on what else I could do?

    does that help anyone?
    dv8000   Windows XP  

  • Wont start up-Getting a finder icon flashing alternating w/ a folder icon?

    HELP !
    My son was using my computer and was surfing a web site with safari as well as listening to iTunes. Then the cursor started flashing. Then a loud beeping sound started. He shut down the system and then tried to use it again. Now all that I get is a beeping sound, then a screen that has the finder icon flashing, then alternating with a folder icon with a question mark inside the folder icon ?
    Please offer any advice as to how I can fix this ?
    Thanks in advanvce
    Kind regards
    Ed

    Hi, Ed. How many times does the computer beep at startup?
    http://docs.info.apple.com/article.html?artnum=58442

  • Equium L40 - Windows wont start, message on screen

    Hi
    I have a Toshiba Equium L40 - 17M.
    Recently when updating my virus protection my computer tried to restart but now wont load properly.
    Now everytime i try to switch the computer on, after the initial Toshiba setup screen I am greeted with the following message in the top left corner of the screen.
    A disk read error occured
    Press Ctrl + Alt + Del to restart.
    However, this message just appears again!
    Any suggestions please!?

    It could be a file system corruption problem, in which case you can connect the HDD to another PC and run CHKDSK on the drive.
    If that's no help, then check the HDD for bad sectors using the Advanced Test in Hitachi DFT (Google is your friend)
    Or you can try running Recovery from your Recovery Discs. This will format the HDD, so you will need to backup your data first if its still there (you can use a USB 2.5" HDD Adapter).
    If you really need your data back, there are Data Recovery programs you can download to search the HDD for the lost files.

  • DW Installation never starts - only get blinking screen

    I've downloaded and executed the CreativeCloudSet-Up.exe and nothing happens save a blinking screen.
    Any thoughts or suggestions appreciated.
    Win 7 64-bit

    Hello Allan,
    if we talk about installing apps: could you already study these links?
    https://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html and
    https://helpx.adobe.com/creative-cloud/help/install-apps.html
    If we talk about CC in the whole, I want to complete Nancy's hints:
    1. Maybe you have to activate/deactivate, so please have a look there:
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
    2. Sometimes, we know in the meantime, the "opm.db file" is the culprit. In this case you should delete it.
    3. Did you already try "uninstalling and re-installing"?
    Be careful with (de)installing aso. by (de)installing by your own resources. As much as I regret it and as strange as it may seem I fear it's a challenge for Adobe's Creative Cloud Cleaner Tool. Sometimes - for whatever reasons - CC doesn't "want" to work. In this case you should CC completely delete and reinstall by help of Adobe Creative Cloud Cleaner Tool. (A try to uninstall by own resources is not enough!)
    I quote: Adobe Creative Suite Cleaner Tool helps resolve installation problems for Adobe Creative Cloud and Adobe Creative Suite (CS3-CS6) applications. The tool removes installation records for prerelease installations of Creative Cloud or Creative Suite applications. It does not affect existing installations of previous versions of Creative Cloud or Creative Suite applications.
    Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html   and follow the prescribed sequence of operations
    4. If necessary and for further questions click through http://helpx.adobe.com/contact.html or http://helpx.adobe.com/de/contact.html and if "open" please use chat, I had the best experiences. I quote from Preran: The chat button is activated as soon as there is an agent available to help.
    Good luck!
    Hans-Günter

Maybe you are looking for