Windows 7 wont Tether over BT

So I paid for Tethering from AT&T installed it and everything worked fine, the FIRST time, but when I tried to tether over BT again my Dell Windows 7 x64 laptop says it cant find the device driver. I have updated my BT driver, installed Windows Mobile Device Center, and updated iTunes and paired-unpaired-repaired, NOTHING works. can someone please help me figure this out? Tethering works fine over USB just not BT

This doesnt change anything. My Windows 7 machine says it cant find the BT driver, but if I connect using an access point I can tether. Why cant it find the driver?

Similar Messages

Have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer.

I have synced my iPhone numerous times and some of the memos in "Voice Memos" on my iPhone wont go over to my iTunes program on my computer. I have a folder titled "Voice Memos" on my iPhone and one of the same name on iTunes on my computer. But after I sync I only get 6 out of the 9 voice memos on my iPhone.
How do I get the rest (or all) of the memos from my iPhone copied to my computer?
Albro P Michell
[email protected]

"I have logged in to my itunes account on a different computer and none of my purchased music is showing up."
Correct. it does not magially appear in other places. It will only be where you put it.
"I also have plugged my iphone in to get updates but it says I will lose all media and apps if I don't update on the computer where I sync everything. "
Correct as well. Iphone will sync with one computer at a time. Syncing to another will erase the current content.
You need to copy everything ( itunes library/contacts/pics/calendars/files/docs) from the old computer, or your backup copy of the old one, to the new one.

HT201401 cam works but not video? When turn camra on it takes photos but wont switch over to video when tap video switch?

4s wont switch over to video when camra on? Takes photos fine but wont switch over to video?

Hi tangier,
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
Take photos and videos - iPhone
http://help.apple.com/iphone/7/#/iph1e767793c
Choose a mode. Drag the screen left or right to choose, Video, Photo, Square, or Pano.
Cheers,
- Judy

So i got ios 7 in beta on my ipod touch, now several months later, it says my ipod touch needs to be activated. it wont activate over wifi or when connected to itunes. how can i fix this?

so i got ios 7 in beta on my ipod touch, now several months later, it says my ipod touch needs to be activated. it wont activate over wifi or when connected to itunes. how can i fix this?

You say you have iOS 7 beta. If you are a developer you have access to the private OS 7 developer's forum
iOS 7 Developer forum- Apple Developer
Otherwise you are on your own since you have a bootleg copy
PSA: iOS 7 If you're not a developer, don't install developer betas on your iPhone | TUAW - The Unofficial Apple Weblog

Can i install windows 8.1 over xp in bootcamp

Can I install windows 8.1 over xp in bootcamp?

Is it on the system drive? on its own drive or is it large enough?
Windows 8.1 will run even without Apple's drivers just fine except for a couple items.
Boot Camp forum probably is best place.
Boot Camp is software (and a forum) as in drivers and Boot Camp Assistant.
You have to do a "custom" clean install, you can't upgrade from within XP, you should of course be using 64-bit and Pro for supporting two cpus.

Need to send a mail when job window time is over

Hi ,
select * from v$version;
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - Production
========
I have created a job using dbms_scheduler.create_job with a 1 hour window ( created using dbms_scheduler.create_window ) .
My job triggers a stored procedure . Now I have a send_mail code at the end of the stored procedure which sends a mail with plsql log as an attachment . When my job runs more than 1 hour the stored proc is getting stopped and not triggering the mail though I put the same code in exception block ( exception when others ) .
CREATE OR REPLACE PROCEDURE my_sp
AS
BEGIN
-- some code ---
begin
-- send mail --
end
EXCEPTION
WHEN OTHERS
THEN
send mail ( Can I get this piece when window time is over )
END;
Is there any other way I can run the last piece of the proc (send_mail) .
Thanks ,
Mahesh

Mahesh wrote:
Folllowing below note .
http://download.oracle.com/docs/cd/E14072_01/server.112/e10595/scheduse008.htm
but need to attach a file .
SQL> desc utl_mail
PROCEDURE SEND
Argument Name               Type               In/Out Default?
SENDER                VARCHAR2          IN
RECIPIENTS               VARCHAR2          IN
CC                    VARCHAR2          IN     DEFAULT
BCC                    VARCHAR2          IN     DEFAULT
SUBJECT               VARCHAR2          IN     DEFAULT
MESSAGE               VARCHAR2          IN     DEFAULT
MIME_TYPE               VARCHAR2          IN     DEFAULT
PRIORITY               BINARY_INTEGER          IN     DEFAULT
REPLYTO               VARCHAR2          IN     DEFAULT
PROCEDURE SEND_ATTACH_RAW
Argument Name               Type               In/Out Default?
SENDER                VARCHAR2          IN
RECIPIENTS               VARCHAR2          IN
CC                    VARCHAR2          IN     DEFAULT
BCC                    VARCHAR2          IN     DEFAULT
SUBJECT               VARCHAR2          IN     DEFAULT
MESSAGE               VARCHAR2          IN     DEFAULT
MIME_TYPE               VARCHAR2          IN     DEFAULT
PRIORITY               BINARY_INTEGER          IN     DEFAULT
ATTACHMENT               RAW               IN
ATT_INLINE               BOOLEAN           IN     DEFAULT
ATT_MIME_TYPE               VARCHAR2          IN     DEFAULT
ATT_FILENAME               VARCHAR2          IN     DEFAULT
REPLYTO               VARCHAR2          IN     DEFAULT
PROCEDURE SEND_ATTACH_VARCHAR2
Argument Name               Type               In/Out Default?
SENDER                VARCHAR2          IN
RECIPIENTS               VARCHAR2          IN
CC                    VARCHAR2          IN     DEFAULT
BCC                    VARCHAR2          IN     DEFAULT
SUBJECT               VARCHAR2          IN     DEFAULT
MESSAGE               VARCHAR2          IN     DEFAULT
MIME_TYPE               VARCHAR2          IN     DEFAULT
PRIORITY               BINARY_INTEGER          IN     DEFAULT
ATTACHMENT               VARCHAR2          IN
ATT_INLINE               BOOLEAN           IN     DEFAULT
ATT_MIME_TYPE               VARCHAR2          IN     DEFAULT
ATT_FILENAME               VARCHAR2          IN     DEFAULT
REPLYTO               VARCHAR2          IN     DEFAULT

Why when I click on a bookmark it doesn't open a new window, it takes over a window I am working on

Why when I click on a bookmark it doesn't open a new window, it takes over a window I am working on

Also, if you right click, the menu will include; '''''Open New Tab''''' and
'''''Open New Window'''''.

WebLogic as Windows 2000 service over s shared file system

I am trying to install weblogic as a Windows 2000 service over a
shared file system with no sucess
(the shared fie system is provided by windows 2000 cluster services).
I am using the srvany utility to have the script that launches
weblogic be run as a service (I need this
because I must launch 2 instances of weblogic in the same machine
as services, i cannot do this
with the bea service tools, having different configurations for
the classpath, or can I?)
The service works if weblogic is not installed in a shared file
system.
On the shared file system, it fails (The service fails, is unabble
to start). I also made a script on the local file
system, that calls the weblogic script on the shared file system,
but weblogic fails to start (with no
message) when loading from the weblogic.classpath
thanks for your attenction,
Bruno Antunes
WhatEverSoft - Java Center

I have also tried running the service with the bea tools, with no
sucess when running in
the shared file system.
When i start the service, it seems to start ok, then stops. with
no message.
Nothing is written to the log, any ideas?
Bruno Antunes
WhatEverSoft - Java Center

The "not enough storage" window wont close when i press close and my phone also wont reset because my lock button doesnt work. what do i do? just let the battery drain then turn it on?

the "not enough storage" window wont close when i press close and it wont reset because my lock button is broken. what do i do?

Battery does not appear to charge
Important: iPod touch cannot be charged with a FireWire-based power source.
Verify that the power source being used is working properly.
If connecting to a computer's USB port, verify it is a high-powered USB 2.0 port. Note: The USB ports on most keyboards don't provide enough power, so if you're connecting iPod touch to a keyboard, make sure it has a high-powered USB 2.0 port.
Verify the computer is turned on and not in sleep or standby mode. If iPod touch is connected to a computer that's not turned on or is in sleep or standby mode, the iPod touch battery may drain.
Try another USB port.
Try charging from a USB charger if available.
If that does not help, try another USB cable if available.
Learn more about charging the battery.
The Home button isn't working
Put the iPod Touch to sleep.
Wait a couple of seconds.
Press the Home button.
iPod Touch should wake up.
If iPod Touch does not wake up, then iPod Touch should be serviced.
Resources for Service
http://support.apple.com/kb/he57
https://selfsolve.apple.com

Installing solaris from a windows xp computer over a network

Hi, I just received the solaris 10 dvd from sun. I have the sparc and the x86 versions. The problem I have now is that I need to install it onto a computer that does not have a dvd drive. Here is the current set up of the network:
I have three computers connected by a switch. Then I also have a laptop which has a wireless connection to the internet. The laptop also has a cable connection to the switch which allows me to share the internet connection to the other three computers. Not the best setup, because when I leave with the laptop the desktops have no internet. Anyway, the laptop has Windows XP microsoft internet connection sharing enabled so it acts as the router. The desktops, one has FreeBSD with DHCP enabled, another has windows xp and the third has Ubuntu. The LAN is working well so far as all can connect to the net.
So now I would like to know if I can and how to install solaris onto the Ubuntu desktop with the dvd inserted into my windows xp laptop over the network. This will be my first Solaris install so I really appreciate all the help and pointers to any tutorials on the net.
Thanks!

hi RTCXiR
recently I installed Solaris 10 11/06 dual boot with Win XP on a single hard drive & as a newbie it took me a while so I posted detailed steps on this same forum afterwards:
http://forum.java.sun.com/thread.jspa?threadID=5137822&tstart=0
hope it might help u... Jags Desai

Automatic windows agent fail over in SCOM 2012 / 2012 R2

Hi All,
I have a question with respect to SCOM 2012 / 2012 R2 windows agent fail over.
For example i have only 400 windows agents and i have 2 MS in my environment. So 200 windows agents are managed by MS1 and the rest 200 are managed by the MS2.
What i want to know is if either of the MS (MS1 or MS2) Shutdown / restart or any thing happens to them, Do the agents automatically fail over to the other MS ? As i have not configured ant thing for this as i don't know.
So is there any configuration to be done for the above to happen after the deployment of both the management servers is done before discovering the agents or does it automatically understand take the rest 200 agents thinking that the other MS is down ?
Gautam.75801

Hi All,
I have a question with respect to SCOM 2012 / 2012 R2 windows agent fail over.
For example i have only 400 windows agents and i have 2 MS in my environment. So 200 windows agents are managed by MS1 and the rest 200 are managed by the MS2.
What i want to know is if either of the MS (MS1 or MS2) Shutdown / restart or any thing happens to them, Do the agents automatically fail over to the other MS ? As i have not configured ant thing for this as i don't know.
So is there any configuration to be done for the above to happen after the deployment of both the management servers is done before discovering the agents or does it automatically understand take the rest 200 agents thinking that the other MS is down ?
Gautam.75801
This happens automagically for Windows agents within a domain that are assigned to a Management Server. For other scenarios, such as Gateways, the Gateways should be configured for failover between Management Servers, and the agents attached to those
Gateways should be configured to failover between the Gateways. Cross platform agents report to a resource pool, so that happens automagically as well.
To confirm your scenario, simply run the Get-SCOMAgent cmdlet.
To test you can do the following, assuming first agent in the array isn't a Management Server/Gateway :)
$SCOMAgents = get-scomagent
$SCOMAgents[0].PrimaryManagementServerName
$SCOMAgents[0].GetFailoverManagementServers()
Supporting article:
http://blogs.technet.com/b/jimmyharper/archive/2010/07/23/powershell-commands-to-configure-gateway-server-agent-failover.aspx

Very slow Windows domain login over IPSec VPN

Hi
I'm experiencing very slow Windows domain logins over an IPSec VPN connection. The AD is in Site 1, some users are in Site 2. Two Cisco ASA firewalls connect both sites by an IPSec VPN over the Internet.
I made some registery changes on the Windows XP client on site2 to let Kerberos communicate over TCP instead of UDP. Still the logins take extremely long (45 minutes). Profiles are very small, so there had to be a problem with Kerberos, MTU sizes or somethin like that. I already changed the clients MTU settings to 1000 byes, but login is still very slow. I made some sniffer logs...
Does anybody know what the problem can be ?
Regards
Remco

Hi Remco,
The most common issue with slowness over VPN is going to be fragementation. In general below are the recommendations to avoid fragmentation
1. For TCP traffic, use "ip tcp adjust-mss 1360" on the Internal LAN Interface on the Router. If you are using GRE then configure "ip mtu 1400" under the Tunnel Interface.
If you are not using GRE then the value of "ip tcp adjust-mss" depends on the type of transform-set being used E.g. AES\3DES etc, so you can increase the value of TCP adjust command from 1360 to a higher value. Though I will start from 1360 first for testing.
Also take a look at the below article for MTU Issues
http://www.cisco.com/en/US/customer/tech/tk827/tk369/technologies_white_paper09186a00800d6979.shtml
Thanks,
Naman

Windows wont launch during XP SP2 install

I'm having issues installing XP SP2 (OEM) on my Macbook Pro system w/ Boot Camp 2.0, Leopard 10.5.2. Windows wont launch after 100% of files are copied from the disc during the install process.
Boot Camp partitions HD correctly and asks for the Windows Install Disc. System restarts from the CD and begins installation - I access the blue screen where I select XP partition - 'C: Partition3 (Bootcamp) (FAT32)'. I hit Enter and installation begins. B.C. setup manual shows 2nd blue screen where you select the file system you want (FAT file or NTFS file) - I have not seen this screen yet. Does this appear after installation? Installation begins and progress bar installs through 100% in 20-30 minutes.
At 100%, computer immediately restarts to black screen and "Press any Key to continue" appears. If I press key, original installation screen appears and it takes me through the exact same process I just did. If I don't hit a key, error occurs and the screen freezes at "Press any Key". If I restart, original install screen appears and Windows re-starts installation. I'm stuck in a loop. I erased the partition with B.C., re-partitioned, but still the same result.
Any advice? I need this for school ASAP.
Thanks,
j

I watched a Youtube Video about installing so I see where the problem is. I don't see the initial End-User License agreement screen, and after I select 'C: Partition3 (Bootcamp) (FAT32)', the "Select File System" screen that is supposed to immediately show up does not appear. What gives? I know OEM should work with Boot Camp.

HT3049 Why do I keep getting "Connection failed: NT_STATUS_BAD_NETWORK_NAME" when trying to print on Windows networked printer over wi-fi?

Why do I keep getting "Connection failed: NT_STATUS_BAD_NETWORK_NAME" when trying to print on Windows networked printer over wi-fi?

If I run the following (on the machine I'm trying to set up the share)
smbclient -L localhost -U%
I got the following output
Connection to localhost failed (Error NT_STATUS_CONNECTION_REFUSED)
so I thought it might be something incorrect with the iptables side of things, however I haven't really touched that at all and it seems to look correct
iptables -nvL
Chain INPUT (policy ACCEPT 667 packets, 79977 bytes)
pkts bytes target prot opt in out source destination
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
Chain OUTPUT (policy ACCEPT 157 packets, 20724 bytes)
pkts bytes target prot opt in out source destination
So from my (very little) knowledge this appears correct (I think)... However it appears that something is blocking access somewhere.

Windows wont see Maxtor drive

Need some help, ive installed XP sp2 {NTFS} on Seagate Sata drive no probs, then i added the Maxtor pata drive to IDE 1 in master, bios sees it, drive manager in xp sees it but windows wont, tried to assign and change drive letter but it wont let me,i right click and it gives the option of changing to dynamic drive, what on earth is dynamic drive i didnt want to risk it because it has my back up info on it from millennium {fat 32} rebooted and added drive to raid with Seagate and when you exit raid bios it stop and says disk read error, i tried it in slave mode still wont see it, how do you get xp to see a pata drive? help!!

1. Since you have the drive on the middle connector of the cable it should be jumpered as slave, not master.
2. In XP a dynamic drive is another way of saying software raid drive. Don't do it as it can't be reverted back without uninstalling and formatting.
3. You should be able to do as suggested using the disk management console to reassign it's drive letter once you've jumpered it as slave while it's still on the middle connector of the cable.
4. You haven't stated if the sata drive is setup in a raid configuration or if you're using it as a standard drive.
5. Maybe moving it to the secondary ide controller would allow XP to see it properly and allow you to pull all you important info off it then you could format it and use it as a archive or backup drive.

Windows 7 wont Tether over BT

Similar Messages

Maybe you are looking for