Windows 7 work in safe mode

this in boot camp with windows 7 start up then go to a black screen. restart in it work in safe mode and check system test it find trouble when you hit space bar in start up. what do I to get windows 7 up and run it is 64-dit windows 7 home premium.

better to contact lenovo support line cause "beep" sound is a message that it's serious issue.

Similar Messages

Windows 8.1 safe mode password doesn't work

Using HP Pavilion 23 all in one model 23-b037c, 2012 windows 8.1.
During testing for internet connectivity was instructed to initiate msconfig and reboot in Safe Mode.
After rebooting the sign in security screen asked for my password. I entered my password that has worked for long time., but system said password incorrect reenter. tried numerous other passwords non accepted. changed MS account PW no good. Worked with HP support several hours for 2 days, trying all advanced trouble shooting solutions they recommended. Ran restore, backup and recovery etc. all failed. After one backup attempt error message said must get out of SAFE Mode.
How do you do this without correct password?
Ran Hard disk test passed OK. Now having to clean and remove all programs and personal files per HP Tech.. Will take several hours per HP sTech. Then will try again to run System recovery to original manufactures settings. Huge mess.
Big problem. Hope this works.
Q. Anyone ever have this problem?
How do you bypass password security screen to access Windows 8.1 without going through this extensive process? tried several password recovery options non worked.
Tried all Advanced troubleshooting options offered by HP Tech.
Preplexed and need help. Thanks

Hello @ea2,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how the Windows 8.1 safe mode password does not work on your desktop computer, and I would be happy to assist you in this matter!
To disable the built-in administrator account for Windows 8.1, I recommend following the steps in this document on How to Enable or Disable Built-in Elevated "Administrator" Account Windows 8 and 8.1. This should help to enter your password when booting into Safe Mode.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

How to enter Windows 8.1 safe mode in syslinux?

My old notebook is running very slowly as Windows 8.1 always reads/writes IDE hard disk, so I disable many windows services. And after relogin, I cannot open almost every program even the Task Manager.
It has to enter the 'safe mode' to repair Windows. In syslinux bootloader, I select 'Windows 8.1' then press Enter and as quickly as I can to press F8. There's no effect that Windows loads into normal mode.
I know that in Linux world everything is a file, so I think I can locate last changed files in Windows when disabled windows services and try to repair it. After a long time searching, in Archlinux I rename '/Win8.1/Windows/System32/config' folder to config.bak ('/Win8.1' is where I mount C:/ partition) and then restart to Windows.
It works! Windows loads into safe mode.
But let Windows to repair itself is a heavy work. I wonder if I can repair just one or a few files in Archlinux to do the easy job. So relogin to Archlinux and recheck the config.bak folder. Yeah! I find a 'RegBack' folder in which the files' modified time is early than that outside with the same file name. So my easy job is to:
$ cd /Win8.1/Windows/System32
$ cp config.bak/RegBack/* config.bak
$ mv config.bak config
Restart to Window, everything is back to good old day!
My lesson is YES EVERYTHING IS A FILE.
My question is beside the rename way, is there any way to enter Windows 8.1 safe mode in syslinux bootloader?

Try to manually interrupt the process while windows loading, it will eventually ask you to.
If don't, try clicking the restart button with shift pressed, if that too would not work; better ask in a microsoft forum.
Last edited by Gulver (2014-01-08 00:02:03)

Itunes wont work.Says there has been a problem with the program and then shutsdown. only works using safe mode

Recently itunes stopped working. It will only work using safe mode. i have check the plug ins folder but i have no plug ins.

Hello MaFiosoXIII
For issues with iTunes crashing and only working in Safe Mode, then check out the article below to continue your troubleshooting to get it working again.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Regards,
-Norm G.

How to run Lenovo t400 with Windows XP in safe mode

Hi guys,
I caught a Spyware Portection Virus this morning while i was doing research on fish disease. The virus isn't letting me run any programs except Internet Explorer. I have found the program to delete it but I need a way to run it so the best way is to run Windows XP on safe mode. So how do you run windows xp in safe mode. I can't access the Microsoft Configuration program (msconfig). Any ideas of how to work through bios to boot up in sade mode?

Hit F8 at the splash screen

Monitor only works in safe mode

My monitor only works in safe mode. when restart in normal mode the monitor screen is blank. when I start in safe mode the monitor works fine.

Is there a reason you have not entered the menu as I have suggested and reset the monitor to factory default?
Your old school monitor needs a kick in the pants to remind it that it is plug n' play. That is essentially what the reset will do. It won't hurt anything.
Was the TV you had connected to the PC before using the monitor an HDTV one with 1080p resolution?
In order to reinstall the graphics driver you will need to be logged in as a user with elevated (admin) priveleges. A standard user cannot install drivers or programs. You do not heed to reinstall RAID drivers.
You might need to consider replacing the monitor with a modern LCD display. They are quite inexpensive these days and can evven be found in the second hand market.
If you don't want to do that then you can remove the video card and then connect the monitor VGA cable to the video output port on the rear of the desktop PC. Removing the card will enable the onboard video.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Satellite A300-1BRS works in Safe Mode

Hi,
My laptop is:
Toshiba A300-1BRS
Windows 7
I bought it on 2008. The origianal OS is windows vista. Last May 2013, laptop doesn't work so the technician upgrade it to windows 7. I wasn't able to do the Toshiba recovery and I don't have the product key for the windows.
Here's the problem.
Now, it run windows normally ONLY with the battery BUT if I plug the charger it keep on restarting and restarting. I've tried to repair the computer pressing F8 then Repair the Computer but it shuts down.
The unit works in Safe Mode and I don't encounter the problem even if I plug or unplug the charger.
Please HELP...

>Now, it run windows normally ONLY with the battery BUT if I plug the charger it keep on restarting and restarting.
In my opinion its an problem with motherboard.
Fact is that unit should work and run properly using AC adaptor or without connected AC adaptor (only battery). Also the battery could be removed while the AC adaptor is connected.
If this isnt possible, I guess the motherboard is affected. Probably the power supply electronic is faulty.
I guess only a detailed hardware check would provide the exact information about the affected part.

Only works in safe mode

Help....I am only a novice mac user (so I need help in the most layman terms possible). Seems all my Apple products are going kaput; first one being my macbook (early 2008 model). Looks like my disk drive isnt working correctly; I put in a new hard drive.....I went to reinstall Snow Leopard then upgrade to Lion. Ever since then my mac only seems to work in safe mode. I used my imac to load snow leopard....(with firewire); and downloaded lion from app store. is there a way to wipe clean and start over? There is nothing on the computer that I need.....I keep all my important files on an external hard drive. my big concern is I dont know how to do it and second since I dont have a disk for lion will just going back to app store allow me to re-download or will I have to pay 30 bucks again. I have seen others have had similar issues...I just cant seem to figure this out. If anyone can help I will be eternally grateful!
Ray

When your in safe mode try going to the Disk Utility and doing a Disk Repair. Repair Permissions. Then see if that lets you boot normally. If that doesn't work you might need to reinstall Snow Leopard again then upgrade to Lion. (Lion will still be available under your App Store Purchases tab and you don't have to pay again).
I recommend you using Time Machine. Not only do you save yourself the trouble of copying things to your External Hard Drive, but if you run into something like this again restoring it from Time Machine saves you all the time you spend downloading Lion and Installing Snow Leopard. Plus everything is exactly how you last backed up. Everything!
Best of luck.
By the way, if you don't see the App Store when you install Snow Leopard just do a software update from the top left apple icon of your system and you should see it when its done.

G4 iBook works in Safe Mode, but not in regular mode (stuck on blue screen)

14" iBook G4 1.2GHz with 1 gig of RAM.
I recently had an issue with this machine in that the image on the screen would freeze but the cursor would be able to move around. This was narrowed down to an issue with the logic board. I wanted something a little more permanent than a shim, so I sent the board in to have it reballed.
After installing the maching back into my iBook, it seemed to work fine until I applied a software update to the machine.
It was then that I got to experience the first of many kernel panics.
Restarting at different times always brought me to the dialog box which states that the machine needed to be restarted in multiple languages.
Running the Apple Hardware Test off my install disks yielded this error code: 2ATI/2/4:113-xxxxx-125
I have no idea what that means. I do know that just before I got the results of the test, the screen changed to all kinds of colors. It was only for a few seconds and then the results (with the error code) were displayed.
Still, not sure what to do next, I tried resetting the PRAM. I also tried resetting the NVRAM.
I also tried booting up into Safe Mode which actually worked. There were no issues with the machine and everything seemed to be working fine.
When I tried to restart the machine in regular mode, I'm taken to the infamous blue screen and the machine just stays there. When I let the machine stay off overnight, it booted up normal, but after applying the software update, the machine was in kernel panic again.
I've tried running fsck, but nothing changes.
I'm still not sure why it seems to work in Safe Mode but not in regular mode.
I'd appreciate any suggestions or ideas.

Hi,
A couple of the things that are disabled in safe mode are AirPort and non Apple startup items. The easiest thing for you to test is the AirPort card. Shut down and remove the AE card under the keyboard. See if it starts. If it does your AE card is bad. If not, start in safe mode and go to System Preferences>Accounts>youraccount and disable all non Apple startup (LOgin) items by clicking on them and then the minus sign. Restart normally and see if it will start.
John

HOW DO I PUT MY HP Pavilion g6 Notebook WINDOWS 8 INTO SAFE MODE

HOW DO I PUT MY HP Pavilion g6 Notebook WINDOWS 8 INTO SAFE MODE.......I KEEP TRYING TO TAP F8 BUT IT DOES NOTHING!!!!!!!

Hi:
Microsoft changed the procedure for entering safe mode in W8/8.1.
Please see this guide for the new process...
http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/

PowerPC g5 only work in safe mode

I have a PowerPC g5 running os x version 10.5.8 which has been working fine but the other day was not given the option to log in just a blue screen and some fan noise. I am able to use the mac in safe mode but that is it :-(

The iMac G5 was one that had many power supply and bad capacitor issues. This sounds like one of them.
Come on. The poster says it works in safe mode, so how can it be a power supply problem?
Seems like a video chip problem to me. The solder worked loose over time in some machines. Re-solder for the brave.
You will have to translate this to 10.5.
You may have a problem with the video chip.
Here is how to tell...
Shutdown your machine. Hold down the shift key. Poweron. Bootup will be longer.
Wait awhile while you harddrive is being checked.
An article on how to boot into safe mode.
http://support.apple.com/kb/ht1455
Runs OK in safe mode...
Running in Safe mode leaves out some video drivers. Which results in your machine not using advanced video hardware. As luck would have it, you can run the safe mode video drivers in normal mode.
Here is how:
https://discussions.apple.com/message/16057567#16057567
Look through the above thread. See the second page. You don't have to read through the first page. Just go to the part where I try a solution that works.
Summary of G5 problems. Includes instructions on a hardware fix for the brave at heart:
See -Rotten Apple- articles in both of these threads.
https://discussions.apple.com/thread/4023152?tstart=0
https://discussions.apple.com/message/18700825#18700825
Robert

Upgraded to osx10.8 and only works in safe mode

I just upgraded to osx10.8 and only works in safe mode! What now?

"works in safe mode" meaning you do not get instant kernel panic when you boot up, and instant kernel panics on boot-up were happening before? If this is the case, it may be that one (or more) of your third-party log-in items is incompatible with 10.8.

ATI 9700 only works in Safe Mode ?

Hi,
I purchased a Celestica ATI 9700 MAC gfx card and it seems only to work in Safe Mode. In normal mode my G4 boots but wont reach the login screen, the screen stays blue and occasionaly it may show the mouse(responds).
I can only think that the card is broke and isnt being stressed by Safe Mode or has some kind of incompatible firmware?
Any tips would be greatly appreciated as i'd love to get the 9700 running in my machine.
Cheers
John

Hi
I could well be wrong but I've always been under the impression the 9700 only works in MDD G4s. I believe they were only available from Apple at the time as a built to order option and the AGP slot in all MDD G4s was modified to provide additional power to the card. I'm not sure whether third party 9700 graphics cards need this though. The 9800 gets round it by having a separate internal power connector, so it can be used in any G4 with an AGP slot.

Windows Stuck in Safe Mode - mouse won't work - need my data...

New Mac User, well two months of trying to get it to opperate correctly. Unbelievable! I've re-installed XP SP2 too many times to count, finally had it up and thought it was running fine for the last week, then I went over to the Mac OS tried accessing windows through boot camp, it shut down the Mac OS, then when I tried to go back to boot windows directly, I received the damning <windows root> \system32\hal.dll file is missing or corrupt - again.
I've gone through a bunch of posts, tried a number of the instructions, and now have a worse issue, my computer is now stuck in safe mode with Windows, by instructions, here, I'd disabled everything for start up in Configuration Utility and checked start up in safe mode there too, so now I can't get it out of it, and since my mouse and keyboard won't opperate in safe mode, I get to the log in page to select user but the mouse just won't move and pressing "CTRL ALTDLT" no response.
In the Recovery Counsole when I rean CHKDSK /r this is what it came back with...
"The volume appears to contain or or more unrecoverable problems."
97638572 kilobytes total disk space.
90877508 kilobytes are available.
406 bytes in each allocation unit.
24409643 total allocation units on disk.
22719377 allocation units available on disk.
So what does that mean? Not sure what the " volume appears to contain one or more unrecoverable problems" means when it's not telling me what they could possibly be. Thoughts anyone?
If anyone knows or has some good advice on how to get windows back up and running correctly, and without wiping out my data - as I can't get it backed up, I would be tremendously grateful...
2 months of this is really enough, dying to use my system, and praying that I can...
Thanks so much,
Kitti
Message was edited by: Kittikatt
Message was edited by: Kittikatt

Here's what worked: http://support.microsoft.com/kb/330184
I followed the instructions above and once I finished, After re-booting, I selected Microsoft Windows XP Professional and the System Configuration Utility came up.
On the “General” tab, it shows that the Start Up Selection is on “Selective Startup” with everything checked, but what’s marked “Using Modified BOOT.INI
Tried to change it to “Normal Startup – load all device drivers and services” then re-start.
Windows came back up, but so did the System Configuration Utility and still showing that it was starting up with “Selective Startup”
Now just need to figure out how to start it up in “Normal”, if in fact that’s possible. Will keep you posted and if anyone has any further suggestions, that would be much appreciated.
I do hope this will help all the others that have run into the main issue, which I have found is caused by the Parallels Desktop by they way, not Microsoft, and that start having issues by getting the dreaded " hal.dll " file is missing or corrupt on a direct Boot to Windows.
Very long and sleepless night….
Kitti

T510: Can't load Windows 7, Keeps rebooting only works in safe mode

Trying to get my T510 up and running after my W520 went DOA after a bios update. When i power on the laptop it tries to load Windows 7 then goes into a rebooting loop. I can get into safe mode with networking just fine without issues, so i figured it was a display driver problem. In safe mode I unstalled the Nvidia drivers and tried to reboot but still got the same issue. I went into the BIOS to see if I could disable optimus and use just the intel GPU, but I don't even see a setting for disabling it or reference to the NVidia GPU at all. I'm positive it was there before.
I've swapped hard drives and memory modules out. Even tried to do a fresh install of Windows and it still won't load. I'm out of ideas. Any help would be greatly appreciated. Thanks.

Try and applied the machine updated in Safe mode. It usually works. If your install is from MS DVD then be sure all the foundation software is installed. Chipset tool especially and build from there.
You could also run the memory diagnostic after booting from the MS Windows 7 DVD. Eliminate a bad memory module. (If you have two) take the first on out and move the second one into the first slot. See if its stable, remove and insert the other SODIM into the first slot. Why, normal mode is very intense on RAM and also address a lot more memory.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Windows 7 work in safe mode

Similar Messages

Maybe you are looking for