Windows 7 WORKGROUP authentication error on xp clients
Hello everybody,
first of all sorry for my bad English.
I have a Windows 7 Ultimate x64 PC in my Office as a server for sharing my files on a external hard drive. I create a WORKGROUP and connect 5 other PCs to this system using a HUB, 4 PCs have windows xp sp3 and another one has a windows 7 ultimate,
i have a strange problem with my windows xp systems, i created 5 users in my server for accessing to folders on external hard drive but each 2 hours my XP systems disconnect from WORKGROUP and get the you haven't authentication access error, ping work but systems
cannot connect to share folders after relogin in xp system they connect, and more interesting without relogin after 4 minutes they can connect without problem.
First i think may be it's a power plan issue in my server and changed all values in advance powering settings but problem not solved.
my windows 7 client system never disconnect
what you thinks go wrong?, i almost sure i haven't network disconnecting issue
Hi there. Is your laptop on Windows & 32 bit or 64 bit? It should work with 32-bit as I read on the kb site:
The compatible Operating Systems are Windows 2000, XP, or Vista (32-Bit), Windows 7 (32-Bit).
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=49273cdd85ee4c928d9cf5c12d4c6cc3_16914.xml&pid=80&...
Try to download the setup wizard online on your windows 7 laptop:
http://homesupport.cisco.com/en-us/support/printservers/WPSM54G
Setup Wizard
12/03/2009
Ver.v1.1
Download 57.1 MB
(Setup Wizard)
One other thing, make sure you installed also your printer driver compatible for Windows7 laptop and make sure that you can print on your laptop when printer is connected to it.
Similar Messages
-
See authentication error by icloudservices.exe
Hello,
I see on my Proxy Server many (more 10.000) authentication Errors from one Client.Hello,
sorry miss the last part of my mail
error message is:
2015-02-17 02:21:17 70 10.???.???.??? [email protected] - authentication_failed DENIED "Office/Business Applications" - 407 TCP_DENIED CONNECT - tcp p03-quota.icloud.com 443 / - - "iCloudServices.exe (unknown version) CFNetwork/520.20.14" 10.???.???.??? 268 841 - "none" "none"
This issue shows on a different proxy server user use normally to browse to a Website!
We deinstall Software to solve the Problem. We are not sure what the reason for that.
Any idea?
Greatings -
SBO Client and Windows Vista in workgroup Licence error
Hi!
My customer runs B1 2004C. Network structure is workgroup. Client and server are in the same workgroup. XP users connect successfully, but new Vista user gets the licence error: "-2147024891 Access denied". DCOM and other customizations on the licence server are done like in SAP Notes. It doesn't help.
I know Vista is not officially supported by 2004C B1, but i have several Vista users running SBO fine in domain structure. I think the trouble is in the workgroup.
Thanks a lot!
David.Hi David,
some of the SAP Notes addressing DCOM access denied problem of 2004 releases.
<b>Note 833798 - After Upgrade W2003 to SP1: Access denied -2147024891</b>
Symptom
After upgrading Windows 2003 server to SP1 you get the access denied error -2147024891
Other terms
license server, error -2147024891
Reason and Prerequisites
Upgrade to Windows 2003 server changes security settings
Solution
The problem is caused by SP1 for W2003 Server. You have to change the
default configuration of the DCOM to enable clients to access license
server again:
1. go to "Start/run", type in "Dcomcnfg" and the Dcom configuration will open
2. expand "Component Services"
3. right click on "my computer", open "Properties"
4. go to tab "Com Security"
5. in "launch and activation permission" go to "edit limits" this
button is new since SP1
6. tick the boxes "remote launch" and "remote activation" for user
"everyone"
After that the clients can access the license server again, if all nescessary rights are give in the DCOM as well. When the changes described above did not take effect, please check this additionally:
1. go to "Start/run", type in "Dcomcnfg" and the Dcom configuration will open
2. expand "Component Services"
3. Go to "SBOLicense", open "Properties" by right-clicking the mouse
4. On register tab "Security" customize all permissions. Add all nescessary User accounts there. If you add i.e. User Group "Everyone" there, you will not have access right problems any longer, as every user belongs by default to this group.
If that change does not take effect immediately, reboot the server.
This note is permanently updated. If you have any comments or proposals tho improve it, please contact the SAP Business One Hotline and let us know.
<b>Note 824976 - error -2147024891, access denied to license server</b>
Symptom
error -2147024891 when trying to connect with B1 client to license server on another computer The License mechanism needs a properly set up license server which is available over the network via DCOM interface to client computers. The necessary windows user rights must be assigned to client and server.
Other terms
Access denied, SAP Business One, License server
Reason and Prerequisites
Functionality description
Solution
1. Is the license server up and running?
The B1 client on the license server computer should be started and logged into to ensure that there are no problems withs the license server itself. The B1 Server tools should be opened and the settings of the License Manager should be checked so that it is possible to connect by pressing the Connect button.
2. Is the network connection between client and license server working?
The server should be pinged via its IP-address for a response. Any firewalls should be disabled between client and license server for troubleshooting reasons as they can effectively block data packets which are needed for license mechanism. If a VPN is used between client and license server all ports should be available.
3. Are necessary windows user rights in the domain given?
We highly recommend to use B1 in a windows domain, as this is the only way to manage user accounts effectively. Domain user accounts have to be configured on the domain controller computer only. For troubleshooting reasons log in at the client with the windows domain administrator account, that should prevent the user from being blocked due to a lack windows user rights. According to our recommendations the users should be Power Users on the local computer.
4. Are necessary windows user rights in a workgroup given?
If the user is in a windows workgroup, the same user account should be configured with the same password on the license server and on each client computer as well. For troubleshooting reasons a local admin account should be configured on each of these computers. As account information is stored locally on each computer, username and password must be exactly the same on each of the machines. Login with this local administrator account. According to our recommendations the users should be Power Users on the local computer.
5. Is DCOM installed and configured correctly?
On the license server DCOM interface should to be installed and configured correctly. It is located under Control panel\administrative tools\ component service. Expand and in My Computer you will find DCOM Config\SBO License. Open its Properties and check configurations in Security tab. Add user accounts there, if needed.
DCOM should be enabled on the Client machines and on the server(s). In the Component Services expand to My Computer and right click to open the Properties for My Computer. Go to the Default Properties tab and make sure that 'Enable Distributed COM on this computer' is ticked. If these settings are modifed a restart of the computer is needed for the changes to take effect.
Br,
Chris -
CE 7.2 NWDS wdp ws client user authentication error
Hello CE 7.2 experts !
I am running a CE 7.2 sp 01 env with NWDS. In my landscape I have some webservices running on PI 7.1.
I am trying to develop a webdynpro webservice client. When run gets user authentication errors.
I have configured the Service Groups, provider systems, http destinations etc for this webservice.
After I have successfully build and deployed the wdp app I am getting error on the wdp gui screen like this:
Exception on execution of web service with WSDL URL 'http://xxxxxxx.lxx.xxxx.xxx:50000/dir/wsdl?p=sa/595aaad7bedb3cf89546e4651ea9954d' with operation 'GetBudgetRequest_out' in interface 'GetBudgetRequest_out'
And in log trace:
Invalid Response code (401). Server <http://xxxxxxx.lxx.xxxx.xxx:50000/XISOAPAdapter/MessageServlet?senderParty=&senderService=SLF&receiverParty=&receiverService=&interface=GetBudgetRequest_out&interfaceNamespace=http%3A%2F%2Fsfso.no%2Fagresso%2Fslf> returned message <Unauthorized>. Http proxy info: none
[EXCEPTION]
com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Invalid Response code (401). Server <http://xxxxxxx.lxx.xxxx.xxx:50000/XISOAPAdapter/MessageServlet?senderParty=&senderService=SLF&receiverParty=&receiverService=&interface=GetBudgetRequest_out&interfaceNamespace=http%3A%2F%2Fsfso.no%2Fagresso%2Fslf> returned message <Unauthorized>. Http proxy info: none
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.handleSOAPResponseMessage(SOAPTransportBinding.java:561)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call_SOAP(SOAPTransportBinding.java:1316)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.callWOLogging(SOAPTransportBinding.java:952)
at com.sap.engine.services.webservices.espbase.client.bindings.impl.SOAPTransportBinding.call(SOAPTransportBinding.java:907)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DInterfaceInvokerImpl.invokeOperation(DInterfaceInvokerImpl.java:76)
at com.sap.tc.webdynpro.model.webservice.model.WSGenericModelClassExecutable.execute(WSGenericModelClassExecutable.java:73)
at com.sap.tc.webdynpro.model.webservice.gci.WSTypedModelClassExecutable.execute(WSTypedModelClassExecutable.java:49)
at com.sap.demo.wd_slf_proj.wd.comp.slf_getbalancecomp.SLF_GetBalanceCustom.executeRequest_GetBudgetRequest_Out(SLF_GetBalanceCustom.java:189)
at com.sap.demo.wd_slf_proj.wd.comp.slf_getbalancecomp.wdp.InternalSLF_GetBalanceCustom.executeRequest_GetBudgetRequest_Out(InternalSLF_GetBalanceCustom.java:153)
at com.sap.demo.wd_slf_proj.wd.comp.slf_getbalancecomp.SLF_GetBalanceCompView.onActionSendReq(SLF_GetBalanceCompView.java:187)
at com.sap.demo.wd_slf_proj.wd.comp.slf_getbalancecomp.wdp.InternalSLF_GetBalanceCompView.wdInvokeEventHandler(InternalSLF_GetBalanceCompView.java:165)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:142)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:75)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.doHandleActionEvent(ProcessingEventPhase.java:159)
at com.sap.tc.webdynpro.clientserver.phases.ProcessingEventPhase.execute(ProcessingEventPhase.java:94)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequestPartly(WindowPhaseModel.java:162)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doProcessRequest(WindowPhaseModel.java:110)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:97)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:514)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:55)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doExecute(ClientApplication.java:1652)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doProcessing(ClientApplication.java:1466)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessingStandalone(ApplicationSession.java:884)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doApplicationProcessing(ApplicationSession.java:856)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:343)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:315)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doContent(AbstractDispatcherServlet.java:87)
at com.sap.tc.webdynpro.serverimpl.wdc.DispatcherServlet.doContent(DispatcherServlet.java:76)
at com.sap.tc.webdynpro.serverimpl.core.AbstractDispatcherServlet.doPost(AbstractDispatcherServlet.java:62)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:152)
at com.sap.engine.services.servlets_jsp.server.Invokable.invoke(Invokable.java:38)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:400)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:203)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:438)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:427)
at com.sap.engine.services.servlets_jsp.filters.DSRWebContainerFilter.process(DSRWebContainerFilter.java:38)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ServletSelector.process(ServletSelector.java:80)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.servlets_jsp.filters.ApplicationSelector.process(ApplicationSelector.java:268)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.WebContainerInvoker.process(WebContainerInvoker.java:81)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.ResponseLogWriter.process(ResponseLogWriter.java:60)
at com.sap.engine.services.httpserver.chain.HostFilter.process(HostFilter.java:9)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DefineHostFilter.process(DefineHostFilter.java:27)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MonitoringFilter.process(MonitoringFilter.java:29)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.MemoryStatisticFilter.process(MemoryStatisticFilter.java:54)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.filters.DSRHttpFilter.process(DSRHttpFilter.java:42)
at com.sap.engine.services.httpserver.chain.ServerFilter.process(ServerFilter.java:12)
at com.sap.engine.services.httpserver.chain.AbstractChain.process(AbstractChain.java:78)
at com.sap.engine.services.httpserver.server.Processor.chainedRequest(Processor.java:447)
at com.sap.engine.services.httpserver.server.Processor$FCAProcessorThread.process(Processor.java:264)
at com.sap.engine.services.httpserver.server.rcm.RequestProcessorThread.run(RequestProcessorThread.java:56)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:115)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:96)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:315)
Any help / hits are appreciated.
Hope to get a prompt solution.
best regards,
Ajeet PhadnisHi,
I hope please upgrade SP01 to SP05.
Please look at these two forums
[forum1|Error executing webservice in BPM; and [forum2|Call to sr.esworkplace fails;
Hope this is help full for u
Regards
Vijay -
RDS 2012 (An Authentication error has occurred 0x607) - WINDOWS 8 ONLY
Hi - please help. I've read many posts relating to this error, but none have fixed my issue.
We have an RDS 2012 setup. 2 Servers. Both session hosts. only 1 is the broker. Cert from official CA.
My authentication is set to ONLY allow devices with Network Level Authority. I don't want to remove this.
Windows XP and Windows 7 can connect both internally, and externally via the RDWeb address perfectly fine, but all Win8 machines get the error "An authentication error has occurred. Code 0x607.
Can anyone please advise why?
Many thanksHi,
I have seen other similar cases got resolved by setting the encryption level to low and security layer to Negotiate.
Here is a thread below:
An authentication error has occured (Code: 0x607)
https://social.technet.microsoft.com/Forums/windowsserver/en-US/94780a11-23ba-4a3c-b11a-734007c2d2fd/an-authentication-error-has-occured-code-0x607?forum=winserverTS
If it is not an option for you, I suggest you check whether the SSL certificate used by RDWeb access is trusted by the Windows 8 clients. There should be a corresponding root CA certificate installed in the Trusted Certification Authorities store.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
New Galaxy 5s. Trying to connect to a guest wireless that routes browser to a login screen. The wireless will not connect (gives authentication error), so will not pull up browser window. My previous Android did not have this problem (it would connect and immediately reroute to the login screeen).
Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?
-
Claims Authentication Error connecting to BCS - but we're using Windows Authentication
We currently have an External List with a SQL Server SProc as a source in a SharePoint 2010 site. It has been working great for months now. I need to make a change to the External Content Type - and I have made changes in the past - but now strange things
are happening.
I can't view the external content type (or any) in SPD. I can create a new Secure Store Service Target Application in SPCentralAdmin and everything seems fine, but I can't consume the application in SPD. I get an error that BCS has rejected the
request. This is new and curious; I'm a Farm Administrator.
Looking at the logs, I find I get a Claims Authentication error that my ID can't be found (the error is below). This is also new and is very, very curious as we're not using Claims authentication for any of our sites. They all use Windows authentication.
I am also getting recent reports from users who are repeatedly challenged for credentials and wonder if this is related.
In my research, I've found suggestions from starting the CWTS Service (I was dubious, I can start the service, and it doesn't resolve the problem) to setting Metadata Store Permissions in SPCentralAdmin (I was again dubious as I'm a farm administrator -
and I get the same error when I try to make this assignment!) So I'm at a loss.
Here is the error (the X'd out information was correct in the trace):
SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity for NTName='XXXXX\XXXXXX', UPN='[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.EndpointNotFoundException:
There was no endpoint listening at net.pipe://localhost/s4u/022694f3-9fbd-422b-b4b2-312e25dae2a2 that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details. ---> System.IO.PipeException:
The pipe endpoint 'net.pipe://localhost/s4u/022694f3-9fbd-422b-b4b2-312e25dae2a2' could not be found on your local machine. --- End of inner exception stack trace --- Server stack trace:
at System.ServiceModel.Channels.PipeConnectionInitiator.GetPipeNam...
We're not using Kerberos at all. We're using good, old-fashioned Windows Authentication. The only changes made to the platform recently have been updates. The error could, of course, be erroneous and I may be charging down the wrong path.
But although I find many links when I Bing the error, all the links pertain to sites using Claims authentication - even the Error Category in my log is "Claims Authentication" - but we're not using Claims Authentication...
Again, any help at all will be appreciated. Thanks!Hi Kevin,
From the error message, we might be missing user permissions to the BCS Metadata Store. Please perform the steps below and test the issue again:
1. Open the SharePoint Central Administration website with either a Farm administrator account or an account that has been delegated permissions to administer the Business Data Connectivity Service Applications.
2. On the Quick Launch, click Application Management.
3. On the Application Management page, under Service Applications, click Manage service applications.
4. In the list of services, select the row of the Business Data Connectivity Service Application that you created in Create the Business Data Connectivity service application and then click Manage and then Set Metadata Store Permissions.
5. Enter the Farm Administrator account and any other delegate administrators if you have them and then click Add.
6. For each account or group that you added that is an administrator of the Business Data Connectivity Service Application, select the Edit, Execute, Selectable In Clients, and Set Permissions checkboxes.
7. Select the Propagate permissions to all BDC Models, External Systems and External Content Types in the BDC Metadata Store. Doing so will overwrite existing permissions checkbox.
8. Click OK.
Also, make sure your account is added as local administrator.
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Client Authentication error while invoking portal web service.
Hi All,
I have created a java portal web service from portal service using NWDS, I am getting client authentication error while invoking the service.
Please tell me where to enter client authenticity details.
regards
Santoshhi,
check whether you have the UME permissions for accessing this webservice.
Rdgs,
Guru -
Remote Desktop Connection Authentication Error from Windows 8.1 Pro to Windows 7 Pro
I keep trying to connect to my server running Windows 7 Pro from my laptop running Windows 8.1 Pro, but I get the following message after providing
my credentials:
"An authentication error has occurred (Code: 0x8007001f)"
I can't find any reference to this error code being associated with using remote desktop.Hello,
Are you connecting to a server as part of a domain ? if so confirm you are using adequate credentials for remote desktop for example: username: domain\administrator
if not you can try connecting to the localhost using:
username: .\administrator - for example
also you can try running your remote connection in admin mode:
Win + R - bring up run then type:
mstsc /admin
hope that helps.
Cheers,
Harry -
I need baby steps to understand where to go and what to do. I can't figure out how to do a diagnostic report. Seems like Windows would have links to click and open? Do I type the information in the address bar or what? Then, how do
I submit the report or is it even necessary? I am frustrated and feel it isn't right for me to have to repurchase Windows 7 just to get it to be 'authentic'. It was authentic, is authentic, but somehow I must have downloaded or deleted something
that messed it all up.
I hope you can deal with my slow mentality. I had surgery two weeks ago and I'm not at my best, but even at my best I'm not very computer savy. Thank you so much.
PamHi,
Apologize for the late reply.
Regarding Windows error code 7601, we need to change the product key or activate it from phone, we may follow the steps mentioned by
george1009 in this thread:
Windows 7 Build 7601 - Error Code 0xC004F063, a month after reinstall
Best regards
Michael Shao
TechNet Community Support -
When I chose ePUB as the download option for books from my library, the Overdrive Media Console application times out and locks up. I get an Authentication error saying unable to open. Then, I am unable to return to books to try another download option as the item did not successfully open using the Adobe Reader Digital Rights Management.
See http://windows.microsoft.com/en-us/windows/change-file-open-program#1TC=windows-7
Also http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7 -
I am using exchange 2003 connected using MAPI with outlook2010.
when i send e-mail to one of my customer.
i got below error message
There was a SMTP communication problem with the recipient’s email server. Please contact your system administrator.
<xxxx.net #5.5.0 smtp;550-Please turn on SMTP Authentication in
your mail client. >
xxxx.net was my server
and my customer was using messagelabs "cluster6a.us.messagelabs.com" to receive mail
i was strange that MAPI connect does not need smtp authentication when send out e-mail.
is that anythings i have missing to do?
thank youHello,
Kindly go through with below link.
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_28133927.html
http://www.experts-exchange.com/Software/Server_Software/Email_Servers/Exchange/Q_28078232.html
Deepak Kotian.
MCP, MCTS, MCITP Server / Exchange 2010 Ent. Administrator
Disclaimer:
Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognizes useful contributions. Thanks!
All the opinions expressed here is mine. This posting is provided "AS IS" with no
warranties or guarantees and confers no rights. -
HT200182 Authentication Error when trying to bind client to Open Directory
I know the diradmin password, and I've even tried resetting the password just in case and still no luck in getting the client to bind to the server. It keeps telling me authentication error - invalid username or password. I'm 100% sure the admin username is diradmin (default) and I'm 100% sure on the password. Caps Lock is not on, I've tried everthing. At this point I'm thinking I found a bug. Any ideas?
Logs?
-
DFS network drive giving error to many clients of Windows 7 and 8.1 after accessing from run
Hi,
My network drive (DFS) is giving below error after upgrade OS from windows 2008 to 2012. On many clients of windows 7 and 8.1 we are able to resolve
by rebooting the system or by net use * /d command. But many user still getting error after accessing from mapped drive as well as from RUN command.
some area stupid thing happening, after accessing from RUN like \\networkdrive then it will open successfully and show all the shared folder. When we
click on particular shared folder it gives below error message and some works perfectly fine. Even though that person have rights on both the shared folder.
"""""check to make sure that the disk is properly inserted, or that you are connected to the internet or your network, and then
try again. If it still cannot be located, the information might have been moved to a different location. """"
Kindly suggest what should I do now?
Inder JoharHi Inder Johar,
Please check if clients could connect to \\domain\dfsroot and UNC path. You could refer to the article below to troubleshoot the issue:
DFS mapping error: Refers to a location that is unavailable
http://jthys.wordpress.com/2013/02/20/dfs-mapping-error-refers-to-a-location-that-is-unavailable/
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
It’s simple enough to use a tool like ROBOCOPY or the File Server Migration Tool (FSMT) to copy your previous created folders over to the new name space
\\networkdrive.
Robocopy
http://technet.microsoft.com/en-us/library/cc733145.aspx
Microsoft File Server Migration Toolkit 1.2
http://www.microsoft.com/en-us/download/details.aspx?DisplayLang=en&id=10268
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
JAX-WS web service client and Windows integrated Security authentication
I am currently developing a JAX-WS web service client running on WebLogic 10.3.2.0. The client is connecting to exchange web service running on IIS.
Everything works well when EWS is configured with Http basic authentication.
The problems started when I changed the autentication method on EWS from Http basic authentication to Windows integrated Security authentication.
The client is then unable to authenticate to the web service. Every request made to EWS returns with the message : Invalid HTTP server response [401] - Unauthorized.
I tried using an authenticator like this one:
static class RetrieveWSDLAuthenticator extends Authenticator
private String username, password;
public RetrieveWSDLAuthenticator(String user, String pass)
username = user;
password = pass;
@Override
protected PasswordAuthentication getPasswordAuthentication()
return new PasswordAuthentication(username, password.toCharArray());
and setting it as the default authenticator :
Authenticator.setDefault(new MyAuthenticator("username", "password"));
but the method getPasswordAuthentication() was not even called.
Is there a way to make a JAX-WS client works with Windows integrated Security ?WIS is not suppported on WLS JAX-WS. You'll need to use other authentication mechanisms such as http basic (which you tried already), or message-level security such as UNT, or SAML.
Regards,
Pyounguk
Maybe you are looking for
-
Touch is frozen after trying to install 2.0 update
I just unpacked my refurbished 16gb ipod touch, installed the latest version of itunes and even was able to throw a few songs on it. Trouble stuck when I tried dloading (purchased and paid for!) the 2.0 update so I could install the free games and ap
-
Hi I have an issue in InDesign CS6. It has been happening the last couple of days now. When i export to pdf. regardless of quality instead of being saved as a pdf it is being sent to Photoshop which then saves the file as a psd... I have updated InDe
-
Splitting a room at the Coldfusion Conferance
Hello, So I know this isn't the standard coldfusion question people ask around here but with the annoucement of the Coldfusion Conferance dates and hotel rooms I figured might as well check. I want to go and the Mandalay Bay Resort says the room come
-
How to incorporate .dll files and java
i have one .dll file (that .dll file was not developed by me but i know which methods are there in that .dll file) then how to incorate that one
-
Import outlook appointment to iphone
Can I open outlook appointment (ics) attachment in iphone ios 6? I can do it on my ipad with ios 5.