Windows 7 x64 driver installiation failure for 621...

Hi,
I've just installed PC Suite (freshly downloaded) on my Win7 x64 system and it will not install the drivers for my Nokia Navigator 6210.
It just says driver installiation failure when i try to install it. I've tried restarting my PC and phone. I've been into device manager andunder wireless communication devices it has nokia 6210 navigator USB phone parent with an exclamation mark next to it and the device status says "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)"
ive tried uninstalling the drivers from the device manager window and installing from windows update, which does install drivers, instructs my to restart my PC and after i do it shows the same error in Device manager again.
PC Suite says i have a 32 bit system but the only version of PC Suite i found was a x86 and x64 bit combined package.
Here is some info about my system;
What version of Windows is being used? 7 x64
What Service Pack is installed? RC
What version of PC Suite is installed? 7.1.40.1
What is the connection method, cable, bluetooth or IR? Cable
PC Connectivity Solution:
Version 9.44.0.3
Nokia Connectivity Cable Driver:
Version 7.1.22.0
Operating system:
32-bit Edition
Language: English
Language for non-Unicode programs: English
Detected Internet browsers:
- Microsoft Internet Explorer 8.0
- Mozilla Firefox 3.5 (Default browser)
Detected Bluetooth stacks:
- Microsoft (Version: 6.1.7600, Build: 16385)

Hi austempest
I just tried a quick check at the Windows 7 Compatibility Center (http://bit.ly/4uZDu2 ) for “PC Suite,” and the search came back that the Sony Ericksson PC Suite isn’t compatible. There was no tangible return for “Nokia PC Suite,” but I’m beginning to think that perhaps you could try either installing the entire Suite in compatibility mode, or at least try installing the driver in compatibility mode.
Here are a couple of procedures:
Installing Software in Compatibility Mode-- http://bit.ly/aSO7U
Installing hardware in Compatibility Mode-- http://bit.ly/B0tCG
Hope this helps
Geoff V
Windows 7 Client Team

Similar Messages

Windows 7 - Driver Availability Chart For Creative Products is nearly useless

<span class="text">[url="http://support.creative.com/kb/showarticle.aspx?sid=605">Windows 7 - Driver Availability Chart For Creative Products[/url] is outdated Windows pre-release drivers (at least for the Audigy SB0090 series) back from July. This appear to be revamped Vista drivers that are not usable for W7 RTM. MS made changes to W7 where most Vista drivers do not work properly any more.
When I try to install the drivers through the installer I get the incompatibility error and the installer quits, then I get the failed install pop-up for W7.
What I would like to know is when Creative plans on releasing drivers that work with W7 RTM? Llinking drivers that worked for W7 RC is not helping and really should be removed.
I have used Creative sound cards since just before the SB6 came out. I have been a loyal Creative customer from early on. But if Creative can not deali'ver a fully working driver suit for my sound card by the end of the month (November) I would appreciate knowing so I can start looking for another a replacement, which won't be a Creative product.
Even though my last 3 MBs have had good built-in sound, I have went out and bought Creative sound cards because I wanted the best, which Creative has previously provided.
I need to upgrade my MB so I have put of buying a new sound card until I do. But if I'm forced to buy a new sound card because Creative says it will provide drivers that work with W7 RTM and for what ever reason can not do so, I will not be buying another Creative product.
I maintain 4 PCs of my own so that will be 4 cards bought from a competitor since Creative has completely dropped the ball. All major component manufacturers have been able to release stable drivers at the same time as W7 RTM release , or within days after release. Why hasn't Creative been able to do so? Creative was able to release suitable drivers for RC in a timely fashion, what happened with W7 RTM? Did they recently fire all the programs and techs?
Please do not link useless info. Please find out what is going on and tell the powers-that-be at Creative they have some really upset customers and ask them to tell us what is happening here. Tell them we would like to know when Creative plans on releasing drivers for W7 RTM so we can make the decision to wait it out or buy replacements.

Again, yes Device Manager has no problem detecting the card and W7 has no problem loading the default Window drivers for it.
Since I had to replace my TV Tuner Card, I used Device Manager to remove it and my Audigy card and then shut the PC down. My new TV Tuner Card is a PCI-E x so I installed it in an open slot and move the Audigy to the PCI slot where the old TV Tuner Card was.
When I started my PC again, W7 detected the Audigy card and loaded the defeult drivers. I again tried to use the installer and had the same error.
The sound works, but I only have basic Windows functions/controls.
It is most definately not a hardware issue.
The online auto update detects it, just the installer does not detect it.
I am currently awaiting a response from CS now. Of course the problem there is that you have to wait/respond, wait/respond, wait/respond just to cover the same ground that has been gone over a hundrd times already.
I put every step I have done in the email. As usual, it was a waste to type because you are asked questions already answered and to preform steps already done.
It would be nice if CS would realize that some of us are only contacting CS because we have already done all the standard steps without success and now need to move onto the advanced ste
ps.

Windows 7 Driver Availability Chart for Creative's products

Hello Everyone,
There is a Knowledge base article that contains the Windows 7 Driver Availability Chart for Creative's products. Please note that the date in the chart may vary from time to time in accordance to Microsoft's plans on Windows 7 release.
Thank you.

For Windows 7
To run the Hardware and Devices troubleshooter in Windows 7, follow these steps:
Open the Hardware and Devices troubleshooter by clicking the Start button , and then clicking Control Panel.
In the search box, enter troubleshooter, and then click Troubleshooting.
Under Hardware and Sound, click Configure a device.

When will a Windows 8 driver be available for the Pixima ip1500?

When will a Windows 8 driver be available for the Pixima ip1500?

That's a cop out answer. I know it's not compatable, there's no driver! There's no excuse for not providing an updated driver for Windows 8. There is NOTHING about windows 8 that is so different from Windows 7 that Canon cannot easily delelop a driver for it. If I am forced to buy a new printer because you won't provide a driver for my ip 1500 it wont be a Canon.

Windows 7 and Windows 8 Driver Availability Chart for Creative's products

Hello Everyone,
There is a Knowledge base article that contains the Windows 7 and 8 Driver Availability Chart for Creative's products.
Thank you.
Mod Notes: Updated the link and include Windows 8.

For Windows 7
To run the Hardware and Devices troubleshooter in Windows 7, follow these steps:
Open the Hardware and Devices troubleshooter by clicking the Start button , and then clicking Control Panel.
In the search box, enter troubleshooter, and then click Troubleshooting.
Under Hardware and Sound, click Configure a device.

Pavillion dv6000: "Device driver" install failure for DVD/CD drive

The laptop does not install the DVD/CD drive anymore. Message says the driver for this device failed to install. It is not assigned a drive letter in Win Explorer. Device Manager shows the drive as recognized, but has the yellow triangle/exclamation point...Properties says driver is missing or corrupt. Needless to say, I know of no "driver" for a CD drive (in modern machines, at least), and nothing related shows up in the driver list on HP webstie for this laptop. I did reinstall the chipset drivers as well as some other driver updates; no change. Re-seating the drive didn't help.
I also replaced the original drive with another, and got the same result...driver install failure.
Any solutions?
Thanks

Yes you need to remove upper and lower filters from the registry. Microsoft has a KnowledgeBase article about it with an autofix, but I have had better luck manually editing the registry:
MS KB

What is the proceedure for replacing a hard drive (after failure) for RAID 5 with IX4-300D?

I have the IX4-300D with 4 hard drives (identical Seagate drives) using RAID 5.
Someday a hard drive will fail and I and I have to replace it. I read through the users manual briefly and I didn't see any documentation on how to perform a hard drive replacement and not lose any data.
So here are my questions:
1) I know per the instructions that Lenovo prefers using identical hard drives. Let's say in 2 years, 1 hard drive fails. Most likely, the same model Seagate hard drive will not be available. So will using a replacement hard drive by the same manufacturer with similar specifications work?
2) Will the front panel (or the software) tell me which hard drive has failed?
3) What is the proceedure for replacing a hard drive after a failure occurs? I read that the IX4-300D is not hot-swappable. So do I just power the IX4-300D down, replace the hard drive, and turn it back on?
Solved!
Go to Solution.

Hi exceptionalht,
It is best to replace the hard drive with one that is the same manufacturer, rotational speed, and capacity, so it does not have to be exactly the same model.
The front panel should show which drive has failed. If not you can check the web interface to find out.
That is the basic procedure for replacing a hard drive. You can see a more detailed instructions here: Installing hard drives in an ix4-300d
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

I would like to find a link where I could download the last nightly build for firefox 6 for windows x64. Need it for extension compatibility. Thanks.

Just need a link where I can find the most recent x64 Windows Firefox 6.0 build. I need it for compatibility with Evernote Clipper extension. I previously ran 6.0 but did not keep the installation file.
The latest version of Evernote Clipper supports Firefox 5 and 6, but not 7 or above.

The Mophie Air is a good battery case, but doesn't offer the protection she's looking for. I suggest sticking to the Lifeproof, the iPhone has a very good battery (2-3 days moderate usage for me).
To your 2nd to last paragraph, that is false. Verizon is allowing exisiting customers to keep Unlimited Data - but will lose it once they use a subsidized upgrade. So if you buy a 4S (or LTE device for example) outright, you will keep unlimited data. Mobile hotspot may use up a bit of data, but it is a separate add-on/feature. The new Family Share plans may change that, so it's one giant center of data all devices use.

Deleting Windows Logical Drives and Reallocating for Reuse as Raw Devices

Can I delete 2 obsolete OCR/Voting Disk Windows 2003 SP 1 logical drives on a raw disk? They are at the beginning of a disk volume that contains other raw ASM and active OCR/Voting disk logical drives. I want to recreate these 2 logical drives for testing OCR and Voting disk mirroring.

Well I deleted the old logical drives that were previously used for OCR and Voting Disk. They were on the beginning of a LUN that also has ASM logical drives as well as new logical drives for OCR and Voting. All this was to test out procedures for moving the voting and ocr.
The test went well and everything still worked after deleting the old logical drives. I never got to the point of reprovisiong that space for reuse...but I assume I could. Unfortunately, I am running 10.2.0.1 Windows and the inter-node workings become unstable whenever I do a new config to the raw LUN. I learned the hard way that it is best to set all services to manual on both nodes, reboot and restart CRS a node at a time.
I'm assuming that many of inter-node stability issues are fixed if I got to 10.2.0.3, right?

Windows 8 Driver Information for LaserJet, ScanJet, and other supported printers.

To help customers successfully use their products with Windows 8, HP has identified recommended drivers per product. Please visit the following support documents for more information:
HP LaserJet – Printers, MFPs, and All-in-Ones supported in Windows 8
HP Scanjet – Scanners supported in Windows 8
For HP Business Inkjet, Designjet, Deskjet, Officejet, Photosmart, PSC, or another supported product, go to Supported Printers for Windows 8.
HP understands that Microsoft has released a Windows 8 Release Preview version. HP is not currently supporting
any Windows Release Preview operating system versions. If you have any questions about the Windows 8 Release Preview,
please refer to the Microsoft’s web site at http://www.microsoft.com/.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

mikemalins,
To add - currently you may use your product on Windows 8 but a Full Feature Software Solution is not yet available
For USB connetion you may print and scan via Windowws Fax and Scan by adding the device from Devices and Printers.
For network connection you may print by adding the device from Devices and Printers.
If you have the RTM version you may also scan through the network by using the HP Scan and Capture app:
http://apps.microsoft.com/webpdp/en-us/app/hp-scan-and-capture/94fffdd0-bb3b-4adc-96ca-24c1d79e16c6
As mentioned by the document above, the full software solution expected to become available prior the public OS release (Oct 26th)
Regards.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can a Windows Hard Drive be reformatted for MAC?

I have a windows computer that I do not use anymore, that I put a 2nd Hard Drive in it. I was wondering if it is possible to install it in my G5 and format it to use it with MAC?

If you have a PATA/Ultra ATA drive, you will need an external FireWire enclosure.
Once you have attached your drive to your G5, use Disk Utility in the Utilities folder to reformat the drive with the Mac OS X Extended filesystem.

MegaSky 580 on Windows X64, Driver?

Hey Peeps,
I've just installed my MSI Megasky 580 onto my notebook and have used the latest drivers as posted on the UK MSI Site. I can't find any mention on the official site or indeed anywhere on the internet.
Does anyone have any information about 64 bit and the megasky 580?
Regards
Adam

there are no 64bit drivers released by MSI for this product
you could try asking on www.planetamd64.com, as most hardware like this is based on an existing design (eg the MSI DigiVOX is recognised by MCE as a Twinhan DVB USB), there may be alternative drivers there you could use

Windows 7 Driver for B9180?

When can we expect a Windows 7 driver and software for the B9180? (both 32 and 64 bit)
Message Edited by MikeSp on 10-18-2009 06:57 PM

MikeSp wrote:
When can we expect a Windows 7 driver and software for the B9180? (both 32 and 64 bit)
This page indicates there are drivers built in to Win 7 and that additional drivers will also be available from HP, The page says "HP Software & Driver downloads will be available closer to the
official release of Windows® 7, which is scheduled for October 22, 2009."
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Webcam NX Ultra under Windows x64

Hello, i recently e-mailed to the customer service of creative and asked for a windows x64 driver for the webcam NX Ultra. Since it isn't quite clear to me weither or not there is one or not, or it is in development, i don't know.
If somebody does know, please reply to this post
greetings, fredn

fredn,
You can find a compatibility list in our knowledgebase by searching for article SID7824. Unfortunately, it appears that the WebCam Vista and NX have no development planned for x64.
Daniel

Hp ENVY m6-010dx Notebook Windows 7 Driver Package SOLVED

As many of you know, hp does not provide Windows 7 Drivers for many newer notebook models that shipped with either Windows 8 or 8.1. Some models, such as ProBook, do come with both Windows 7 and Windows 8 or 8.1 licenses and have thus hp provides drivers for both.
The hp ENVY m6-010dx ships with Windows 8.1 installed and only has listed drivers for that operating system on the hp Support Site. Many of the Windows 8.1 Drivers will work for Windows 7 - but some will not.
I have complied a Windows 7 Driver (64bit) Package for the ENVY m6-010dx (my guess is it will also work on other slightly different ENVY Models with AMD Processors such as mine).
If you have an hp ENVY m6-010dx and hate Windows 8.1 and want to downgrade to Windows 7 - here is the link to the driver package I have put together. It's a large file - well worth the download time though if you want to use Windows 7.
https://www.dropbox.com/sh/01svwkhdi9n9crf/AABqObKTkDmU3g04gMfi0ky-a?dl=0
Hope this helps others.
Greg Griffin

You're very welcome.
Try this driver for the bluetooth from a Lenovo notebook...
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029104
Try this wirless driver from asus:
You wan the windows 7 file labeled : (The first one listed)
ASUS PCE-AC66 driver 6.30.95.26
OS Support : Wins 7 (32&64)
http://www.asus.com/Networking/PCEAC66/#support_Download_30
Now you install this driver by unzipping the file you downloaded and make a note of the location of the unzipped file.
Go to the device manager and click on the network controller needing drivers.
Click on the driver tab. Click on Update Driver. Select the Browse my computer for driver software and browse to the folder that was unzipped.
Make sure the Include Subfolders box is checked and see if the driver installs that way.

Windows 7 x64 driver installiation failure for 621...

Similar Messages

Maybe you are looking for