Windows 7 x64 not detect USB 3.0 in H97 PC Mate

Hello, from I was installed W7 and update usb 3.0 drivers using MSI Live update W7 not detect USB 3.0 like that.
I tried uninstall and reinstall drivers with the same result. W7 show a dialog and tell me "This devices can go faster if use a USB 3.0 port" (more or less, I'm spanish and I'm sure I've done a poor traduction sorry)
Any ideas?
Thanks and greetings!

Hello!
Try to uninstall all drivers related to USB, uninstall MSI LiveUpdate. Reboot. Use CCleaner to clean registry. Reboot. Then install drivers listed here:
http://www.msi.com/support/mb/H97_PC_Mate.html#down-driver&Win7 64
* Only those you're missing

Similar Messages

Surface Pro 3 / "Windows did not detect a properly installed network adapter"

Hi all,
I've been running the Windows 10 Technical Preview (9926) on my Surface Pro 3 successfully
since January. Unfortunately, I lost all internet connectivity today.
The problem started when I noticed the type cover wasn't working (pressing keys on the type
cover wasn't registering any typing on my screen) and my USB mouse wasn't working either. I tried removing and reattaching the type keyboard but this didn't fix the issue. I had to use the accessibility on-screen keyboard to sign into Windows (thankfully touch
was still working). Once I signed in, I still didn't have typing or cursor ability, so I decided to restart the computer.
Then it got worse. I noticed the Surface Pro 3 was stuck on "restarting" and wouldn't
actually restart. Since it wasn't responding, I held down the power button for about 10 seconds until it turned off. When I turned it back on, the type cover and mouse started working again.
Unfortunately, this is when the WIFI problems began. I had WIFI for a few seconds, and then
I lost internet. I disconnected/reconnected but there was a yellow triangle telling me there was some sort of problem. So I restarted the Surface Pro 3.
When it came back on, there were suddenly NO connections available at all. Opening the "Network
& Internet" settings page gave me the message "Windows did not detect a properly installed network adapter". And here I am, without internet on my Surface Pro 3, borrowing my friend's computer so I can type this message (he is also running
Windows 10 build 9926 on his laptop and is able to connect to my WIFI with no problems, whereas my Surface Pro 3 cannot even detect any networks). I have not dropped or damaged the SP3 in any way, and there have been no storms or power outages or anything
of that sort. Any ideas what could have happened to the WIFI on my Surface Pro 3?
Thanks for your help...
Ethan

Hi Ethan,
Currently, there are a few compatibility issue between the current hardware and Windows 10 Technical Preview (9926 build), this is mostly related to driver compatibility issue.
I suggest you download the latest network adapter driver package to install, when it is finished, check if it appears under Device Manager.
Surface Pro 3, Surface Pro 2, and Surface Pro firmware and driver packs
https://www.microsoft.com/surface/en-us/support/networking-and-connectivity/install-wireless-drivers
You can check if you can install the latest firmware package for your device.
Here is an article to talk about such things:
Windows 10 January Technical Preview on Surface
https://www.microsoft.com/surface/en-us/support/install-update-activate/windows-technical-preview#Known
Regards,
Alex Zhao
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows did not detect any networking hardware, Windows 7, New Hard Drive

Message "Windows did not detect any networking hardware"
Satellite P505 S8980 Windows 7 Home Premium.
I replaced the Toshiba 500 GB HD with 500 GB Seagate.
Device Manager icon for any device with yellow exclamation mark,
Click on "Update Driver". Lan eNet details as follows:
Antheo - R8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
Browse to the folder where the setup program has the driver...
Message: "The best driver software is already installed."
(But the yellow exclamation mark still harasses me.)
--- Go to "Setup new connection" ---
"Choose a connection option"
Click on "Connect to the Internet"
Response: "Windows did not detect networking hardware"
As near as I can tell, that translates from error 0x8E5E0247
I have this same error on other yellow exclamation marks respective of what kind of device it is.
=> To test my sanity, I put the old hard drive (same size) back in and except for the impact of slowness due to error retries, everything works okay.
Note:
Same issue (hardware not detected) for Video adapter and Audio.
I bought new USB Wireless adapter to test, and the driver installed but not activated because "not digitally signed", and that same issue fits all the above hardware. I down loaded them from Toshiba, and they are confirmed installed, but not accepted with digitally signed. I have uninstalled and reinstalled with same results.
Solved!
Go to Solution.

I'm discovering I am not as well as I thought... running on the AF hard drive which was built with a copy drive from old format drive which was the product of system recovery disc set.
Review for context: Advanced Function HDD
Scenario that exposes harm caused by cloning data from 4K blocks drive to 512 bytes blocked drive (AF)
Toshiba supplied Windows-7 System Restore Discs: to factory state
Then I built the Windows-7 Repair Disc... used later.
Hard drive was replaced when it caused SMART warning at every system boot.
Acronis was only utility that quickly detected problem (3 sectors had permanent read errors.) Active@Disk Image and Power Quest Drive Image (Ghost) did not detect the issue.
I tried Seagate 500 GB and Western digital 500 GB HDD drives as copy target.
That new drive would not boot: "Required source not found"
Booted My newly created Windows-7 repair disc, and used to to fix startup.
See images.
That worked and then the ST9500423AS disc booted.
Now... next day I discovered Window Update is not working.
I get message:
Windows Update cannot currently check for updates, because the service is not running. You need to restart your computer.
I ran Microsoft Fixit for updates. It says it fixed two items.
I still have the problem.
The service shows "started"
Control Panel/ ACTION Center/ Maintenance/ Check for Updates
"No action needed"
"Windows Update does not require any action"
I checked Update History...
... It is empty, else window is vacant... blank.
Soooo..... for a sanity check, I swap out hard drive; go back to the old format (which is the one I copied).
It works! 7 updates to install, including SP1... but I did NOT install them.
Switch back to the AF drive... Update doesn't work. I am broke again.
Is this another strange problem caused by the Advance Format issue?
What to do?
By the way... I did install an Intel storage Matrix driver update, but I do not have RAID chip, so that driver is not for me... unless I missed out on something.
Carl

Windows will not detect my ipod mini

i am haveing a problem with my ipod mini 4gb. I deleted the iPod_Control hidden folder and since then windows will not detect my ipod, i have tried this on sereral pcs. using wxp. Really need asistance!

iPod_Control directory is needed! You wont delete it.
Try to restore your iPod, using the restore utility
AMD 2200+, Asus A7N8X-X, Radeon 9550SE Windows XP iPod 5th Gen Black

Windows did not detect any networking hardware iMac 27' 2013 model

Installed windows 7 using bootcamp now when I go to connect to a network it says windows did not detect any networking hardware

Did you install the windows drivers as well?

Wich drivers to install after ´Windows did not detect any networking hardware´

Hi there, I just reinstalled my laptop. But something went wrong. My laptop says now:Windows did not detect any networking hardware´ I found already out that I need to install drivers. But there is so much choice. Wich one do I need to install.http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5405166&swLangOid=8&swEnvOid=4059 Hope you can help me!Freek

Hi @sweetandsouther ,
Welcome to the HP Forums!
It is a terrific place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
How Do I Find My Model Number or Product Number?
I understand that Windows it not detecting any network hardware.
If you check Device Manager is it recognized?
If the card is listed is there an error on it?
If not and you are out of warranty you could try reseating the network card.
Here is a link HP Notebook PCs - Testing for Hardware Failures (Windows 7, Vista) to that may also help.
Here is a link to HP PCs - Troubleshooting your wireless network and Internet connection (Windows 7) that may also help.
Have you ran the HP Support Assistant ?
Have you tried using MS Fix It?
You may choose to contact HP support for assistance with this difficulty.
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Registry edit Apple requires is causing windows to not detect files on the DVD drive

Registry edit Apple requires is causing windows to not detect files on the DVD drive. If I set up the registry it requires then the files will not be dected & if I do it the way windows requires then the files will be detected but ITunes will not be able to use the optical drive. Is there any kind of patch or something someone can help me with?
Thanks O'Bie

To fix registry, refer to this article:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299

T410 running Windows 7 not detecting HP LP3065 connected with DisplayPort to DVI Dual-Link

I am running Windows 7 on a Thinkpad T410. I have an HP LP3065 monitor connected to it using an Accell DisplayPort to DVI Dual-Link adapter. Windows 7 does not detect the monitor. The NVIDIA drivers are up to date and I have tried powering the Accell adaptor with multiple USB ports. I do not know if there is a problem with the adaptor or if Windows 7 is just unable to see the monitor with this combination.
Could someone please let me know how I can diagnose this? Thank you in advance.

Similar issue: my T410 does not detect LG W2343T-PF (1920x1080) connected with DisplayPort to DVI Dual-Link Cable
T410 with integrated graphics
Type: 2516
BIOS: 1.09 (2010-01-07)
Embedded Controller: 1.03
Windows7 Pro x64
drivers are up-to-date with Lenovo
the same DP to DVI Dual-link cable was able to connect to Dell 1280x1024 monitor in my office.
Maybe I should used single link DVI cable.
I will do more testing this evening
(1) to test the connection on difference 1280x1024 monitor this evening at my home
(2) try different cable - something link DP to DVI Single-link cable
Meanwhile, just want to check others experient working with DisplayPort on T410/T510 as I really need to use dual external mornitor with my T410.

IPod 4th gen grayscale will not detect usb connection.

Hello everyone, I have a iPod 4th gen grayscale and I'm running Ubuntu, everything has worked well for about a year now, I have been syncing my iPod through VirtualBox with Windows XP for as long as I have been using Linux, though, for some reason, my iPod has stopped noticing my usb being connected, I know it's not the usb cable, or the usb ports, I have restarted my iPod and put it into disk mode, still no luck, restarted my computer, Linux will not detect anything plugged in, nor will Windows, though my iPod shows the battery charging when plugged in, but iTunes will not detect the iPod.
I have switched the hard drive of the iPod out seeing if that was the problem, still no luck, my car dock will pick up the iPod and play music, so will my other docks, I thought it might of been Linux at first, so I plugged it into my desktop with Vista, it also will not detect it.
Does anyone have an answer to this riddle?

A bad USB hub will cause the problem ... are you using it ??

Thinkpad Edge S430 - Windows does not detect external display connected via HDMI

On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
Hence I think that it's very likely that this is a Windows-specific driver issue.
Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.

skn2011 wrote:
My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
Are you using the Apple adaptor or a 3rd party

Custom kernel not detecting usb.

I built custom kernel (kernel26mm) and when I boot it it doesn't detect USB.
[dheart@lightbringer dheart]# cd /proc/bus/usb
bash: cd: /proc/bus/usb: No such file or directory
[dheart@lightbringer ~]$ lsusb
[dheart@lightbringer ~]$
and the out of lsusb on arch's kernel is:
[dheart@lightbringer ~]$ lsusb
Bus 005 Device 001: ID 0000:0000
Bus 003 Device 003: ID 04e8:3268 Samsung Electronics Co., Ltd
Bus 003 Device 002: ID 046d:c00e Logitech, Inc. M-BJ69 Optical Wheel Mouse
Bus 003 Device 001: ID 0000:0000
Bus 004 Device 002: ID 0c10:0000
Bus 004 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
What do I need to do?

Dheart wrote:
# CONFIG_USB_SUPPORT is not set
I think that explains a lot of things...
Well... there ya go

Access Connections Windows 7 Not detecting port

hey everyone, been having this issue where a windows 7 machine does not detect a local lan port when docked in thus not switching off wireless and onto the LAN. I've been running all of the other XP machines and it appears that they detect and ask which location they are. All of the machines don't have gateways on them. is there a way to get the windows 7 machines to detect and switch over without using a gateway?
Thanks

Hi, yesterday i talked to HP customer support executive and he provide me following link : http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_147188_1&swEnvOid=4063# After installing the driver the issue was same but at night when i was surfing internet using LAN cable all of sudden i saw "Device Driver Installation" notification at right down corner of my laptop. I was using LAN cable since my Wifi was creating problems. After that i opened device manager and i was shocked because all network driver including bluetooth, wifi are there in network adapter tab. I reboot my laptop more then 10 times and i observed wifi is working fine. I am not getting why my laptop behaving so random.

Windows 7 Not Detecting Nvidia Card. Gt70 670MX GPU.

So I downgraded from windows 8 to windows 7 and have recently discovered my computer is using the Intel HD 4000 instead of the correct Nvidia 670MX. When I disable the Intel Hd the system restarts and displays stuff but the nvidia program says it can not detect an nvidia gpu. When I re enable, the nvidia driver detects the gpu but does not use it (directx diag shows the intel hd 4000). Any help would be greatly appreciated because I would hate to have to reformat back to windows 8.

Dxdiag will not use the NVidia card. Ignore it, as it's stupid to rely on it for anything.
You can't use the NVidia card 100% of the time. You need to use the Intel HD4000 when you're not gaming, as that's what it's meant for with Optimus.
Sometimes you need to make sure that it is switching to the NVidia card when you need it for a game or for whatever it is you're doing that you need it. This usually involves making a custom profile within the NVidia control panel. I have not played a game yet where I did NOT have to add it. I'd add it anyway, just to be sure that it's working correctly. Once you add the game, and tell it to use the NVidia high performance adapter (instead of the Intel integrated adapter), it should work just fine and hopefully increase your FPS.

Windows does not detect Base Station

Hello,
I have a Laptop on XP that will not detect a base station. I have run AirPort assistant and Administrative Assistant, but it will not show up? How do I get it to detect the base unit on AirPort Express?
Thanks
Fujitsu & iMac Windows XP Fujitsu N Series

It will say that if you are not connected to a network.
Your laptop should be able to see the wireless network even if it is not connected to it from the wireless icon in the system tray.
iFelix

OSX ni-daqmx base does not detect USB-6216

USB-6216 is not detected on macbook pro retina late 2012 with NIDAQMX base installed even though the board is listed as supported.
Other boards (i.e. USB-6008) work. The 6216 works prefectly using win7 in a virtual machine on the same macbook; when the wirtual machine is on max asks whe the borad has to be connected and answering win TWO devices are connected to win (i.e. Firmware loader and 6216)
If the virtual machine is off nothing is asked, however, when 6008 is connected its led starts blinking, while nothing happens on the 6216.
A listing of the USB devices in the case of 6216 shows:
USB Hi-Speed Bus:
      Host Controller Location: Built-in USB
      Host Controller Driver: AppleUSBEHCI
      PCI Device ID: 0x1e2d
      PCI Revision ID: 0x0004
      PCI Vendor ID: 0x8086
      Bus Number: 0x1a
        Hub:
          Product ID: 0x0024
          Vendor ID: 0x8087 (Intel Corporation)
          Version: 0.00
          Speed: Up to 480 Mb/sec
          Location ID: 0x1a100000 / 2
          Current Available (mA): 500
          Current Required (mA): 0
          Sleep current (mA): 0
            Vendor-Specific Device:
              Product ID: 0x7269
              Vendor ID: 0x3923 (National Instruments)
              Version: 0.00
              Speed: Up to 480 Mb/sec
              Location ID: 0x1a120000 / 4
              Current Available (mA): 500
              Current Required (mA): 100
while in the case of 6008 shows
USB 3.0 Hi-Speed Bus:
      Host Controller Location: Built-in USB
      Host Controller Driver: AppleUSBXHCI
      PCI Device ID: 0x1e31
      PCI Revision ID: 0x0004
      PCI Vendor ID: 0x8086
      Bus Number: 0x14
        NI USB-6008:
          Product ID: 0x717a
          Vendor ID: 0x3923 (National Instruments)
          Version: 1.03
          Serial Number: 0130C6E2
          Speed: Up to 12 Mb/sec
          Manufacturer: National Instruments
          Location ID: 0x14200000 / 17
          Current Available (mA): 500
          Current Required (mA): 500
Anyone may help?
Thanks

Dear Cindy,
many thanks for your replay. I think it will be quite useful.
I should have the last driver revision (downloade one week ago...) and the board is a screw type. I have not checked it on another mac, but I will try to find one.
The part on the lsdaq is the most interesting for me: my lsdaq shows no boards at all (it shows something similar if I connect a 6008 board so it is working), but the mac detects an USB device (listed as vendor specific) as:
Vendor-Specific Device:
              Product ID: 0x7269
              Vendor ID: 0x3923 (National Instruments)
              Version: 0.00
              Speed: Up to 480 Mb/sec
              Location ID: 0x1d110000 / 6
              Current Available (mA): 500
              Current Required (mA): 100
As you see the product id is different. I suspect the problem is in the board firmware: when I connect the board and the win virtual machine is on, parellels asks me if I want to route the board to win. If I say yes after few seconds it asks if I want to route a second device which is labeled as 6216. It seem the board starts presenting one device and then it 'boots' a second device only after some driver operation.
May I ask you to check the board firmware using FWUpdate.app located in /Application/NI-DAQMx Base/bin/ ?
I contacted NI and maybe this can help them. When did you buy the board? Can you read the product id on the back of your board?
Many thanks again
Marco

Windows 7 x64 not detect USB 3.0 in H97 PC Mate

Similar Messages

Maybe you are looking for