Windows 7 x64 Syncing Never Completes. iTunes Crashes At The End
I have had my ipod touch 3g for half a year now. First I used to use it on 32bit Windows 7, but recently I upgraded my machine and run 64bit Windows 7. It has been running well for the past few months but all of a sudden I have been getting a lot of error messages as well as iTunes not being able to complete syncing.
Everything starts normally, but iTunes crashes right near the END, after all the files have been copied. You can almost smell the "Sync complete, ok to disconnect" text. Please check image.
http://i44.tinypic.com/25jupli.png
If I let it be, then Windows eventually gives you a iTunes has crashed dialog box.
I have tried EVERYTHING. Have restored my ipod dozens of times. Have tried 9.1, 9.03 and 9.02 both in 32bit and 64bit variants. Nothing seems to work.
Funny thing is, if I go back to my old machine with the 32bit Windows 7, the ipod syncs just fine.
So I am guessings it's either a problem with my machine, or some problem with iTunes and 64bit Windows 7.
Please help!
I've had the exact same problem since the last update. It just keeps saying "Sync in Progress" and nothing changes until I stop it. I've tried resetting, reinstalling, etc.
I have noticed three things:
It is sync'ing at least partially...
I unchecked some photo files and it took those photo files off. But now I've added them back and it won't put any photo files onto my iPhone.
If I check/uncheck iTunes U then hit apply it will actually say "Sync Complete" but it still hasn't put my pictures back on the phone.
Also...just something that I don't like...apparently the ability to mark a podcast as "played" or "watched" is no longer available as an option at the podcast level and they have to be cleared at the individual episode level...that's totally annoying cause now I have to go through and "mark as played" for each podcast.
Any ideas?
Similar Messages
-
IPod sync never completes, if I cancel the sync a large portion of my music disappears
Hi, hopefully someone here can help!
I have recently had an issue with my iPod touch and iTunes 12.0.1.26. It has been a bit of a pain to sync ever since that update that screwed up other people's iThings but I hadn't had a problem in a few months. Now whenever I try to sync it will take a long time and never complete, always getting hung up on the last step before anything is transferred. If I unplug or cancel I get an error box that says the iPod couldn't be recognised and the sync failed to start even though it would get through to that last bit after backing itself up. After each failed attempt the Other data section becomes bigger until I get another error saying that there is not enough space on my iPod for everything, sometimes it is over capacity by 10GB. Every time this happens I end up with less and less music on my iPod until I get incomplete playlists and entire albums wiped off. After this the only solution seems to be a factory reset and restore from backup, which I have done twice already this week.
My phone will sync with no issues so I am not sure if it is a software or hardware problem. Its winding me up, anyone have any ideas? I have already removed and reinstalled iTunes and have done a reset on the iPod.- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reboot the computer
- Try another USB port
- Try another cable
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic. -
I have installed xMAM 3.0 (SR4 Patch 0) on a machine and when I click sync 9 out of 10 times sync never completes.
Our MI server is MI7.0 SP12 patch0.
Below is the trace file.Can some one point out what may be wrong please? How can I debug this in the middleware?
Thanks.
=========================================
[20080401 15:38:23:382] I [MI/API/Logging ] ***** LOG / TRACE SWITCHED ON
[20080401 15:38:23:382] I [MI/API/Logging ] ***** Mobile Infrastructure version: MI 70 SP 12 Patch 0 Build 200705080758
[20080401 15:38:23:382] I [MI/API/Logging ] ***** Current timezone: America/Chicago[20080401 15:38:23:382] I [MI/API/Logging ] ***** Current Trace Level: 1000
[20080401 15:38:23:382] I [MI ] Trace severity: All (1000)
[20080401 15:38:23:382] D [MI/PIOS ] No implementations found. Error Code:(3)
[20080401 15:38:23:382] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/trace/trace.jsp'
[20080401 15:38:29:553] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:38:29:553] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:38:29:553] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = ''
[20080401 15:38:29:553] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
[20080401 15:38:29:569] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:38:29:569] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:38:29:569] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = 'tracechangeTraceLevel'
[20080401 15:38:29:569] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/trace/trace.jsp'
[20080401 15:38:33:366] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:38:33:366] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:38:33:366] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = ''
[20080401 15:38:33:366] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
[20080401 15:38:35:553] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:38:35:553] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:38:35:553] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = ''
[20080401 15:38:35:569] P [MI/Sync ] Notify R3 called
[20080401 15:38:35:569] D [MI/Sync ] There is already a container for method WAF_REGISTRY and user ELECT16 in the outbound queue
[20080401 15:38:35:569] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
[20080401 15:38:35:569] I [MI/Sync ] Synchronize with backend called, Thread=Thread-25
[20080401 15:38:35:569] I [MI/Sync ] Thread=Thread-25 took lock for synchronization.
[20080401 15:38:35:569] P [MI/Sync ] Use following gateway for synchronization: http://sppm01.rowancompanies.com:8000
[20080401 15:38:45:631] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:38:45:631] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:38:45:631] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = ''
[20080401 15:38:45:631] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
[20080401 15:38:55:709] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:38:55:709] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:38:55:709] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = ''
[20080401 15:38:55:709] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
[20080401 15:39:05:788] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:39:05:788] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:39:05:788] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = ''
[20080401 15:39:05:788] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
[20080401 15:39:15:866] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:39:15:866] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:39:15:866] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = ''
[20080401 15:39:15:866] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
[20080401 15:39:25:944] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:39:25:944] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:39:25:944] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = ''
[20080401 15:39:25:944] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
[20080401 15:39:36:037] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:39:36:037] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:39:36:037] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = ''
[20080401 15:39:36:037] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
[20080401 15:39:46:162] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:39:46:162] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:39:46:162] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = ''
[20080401 15:39:46:162] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
[20080401 15:39:56:225] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:39:56:225] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:39:56:225] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = ''
[20080401 15:39:56:225] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
[20080401 15:40:06:303] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:40:06:303] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:40:06:303] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = ''
[20080401 15:40:06:303] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'
[20080401 15:40:16:631] P [MI/ComServer ] Connection to client established
[20080401 15:40:16:631] D [MI/ComServer ] Client: received command: shutdownsmooth
[20080401 15:40:28:209] D [MI/Core ] Set current application to 'MOBILEENGINE_JSP'
[20080401 15:40:28:209] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:doGet(...) called
[20080401 15:40:28:209] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:getEvent() done with event name = ''
[20080401 15:40:28:209] D [MI/API/Runtime/JSP ] AbstractMEHttpServlet:dispatch request to '/jsp/home/home.jsp'Hi,
you need to find mobileID for your installation and go to monitor - that will give you more details on what is happening with sync process.
Please refer to this link:
http://help.sap.com/saphelp_nw70/helpdata/en/43/4411ce2d281bcde10000000a1553f7/frameset.htm
to get info on monitoring functionlaity of Mobile Infrastructure.
Regards,
Larissa Limarova -
On connecting my iphone 4S to itunes I am unable to add any music from my itunes library and get a message saying it is already synced with another itunes library on the same computer. As far as I am aware I only have one itunes library on the computer. Does anyone know how to fix this error please?
iPhone and iTunes software fully up to date.
Thanks!iOS: Device not recognized in iTunes for OS X - Apple Support
-
I bought a music video on my iphone and synced it to itunes, but now the music video is gone from my phone, how do i get it back?
I've tried syncing it at least 3 times thanks for the answer though
-
I am unable to sync my old Itunes library to the IMac I purchased last month, I tunes wants to erase the old library except for the ITunes I have purchased. Any ideas out there?
- You can only syncewith one iTunes library. It sounds like you change libraries such as changing the computer.
- As you may know you can transfer iTunes' pruchases to a new computer by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- This previous discussion provide info on how to move other music from an iPod to a computer:
Best iPod to PC
- You can also manage music with different computers by:
Using iPhone, iPad, or iPod with multiple computers
- If you need more help please provide more information. -
When I sync music from iTunes to iPhone, the music shows a dotted circle in iTunes and doesn't show or play on my iPhone music app.
any ideas how to resolve this?after looking at a few other posts, i tried the uncheck the sync box, did a sync, rechecked the box, and synced again. the music is now downloading into my phone. if anyone else has this problem try this first.
-
Any way to move the Radio tab (Itunes Radio) right? Because it's the left-most tab, it loads first..forcing me to click on songs every time itunes loads. I'll never use ITunes Radio. The screen will forever be trying to sell me on using it. Its free, I know. Still not using it.
Margthecar wrote:
Apple has to stop pretending that their technology is not complicated. It is. Apple has to stop pretending users won’t have problems. They will. Apple needs to train their employees in their own technology.
Awesome post. This is the best description I've seen of what continually makes me angry about Apple. I guess their attitude is, "Whoa, look at all this money! If it ain't broke, why fix it?" And Margthecar the I keep shoveling money into their coffers .... -
Windows 7 x64 - iPhone and iTouch - iTunes Sync errors on new HP Dv8
PROBLEM DESCRIPTION:
I just purchased a brand new HP dv8 laptop and cannot get my iphone or itouch synch. I get errors for both the iphone and itouch, but my Nano and shuffle are fine.
HP support said that this is a known issue and that the software is to blame so I should contact Apple support (of course).
SYMPTOMS INCLUDE:
- Phone is recognized on and off by the PC
- Will start to synch and and then I get one of many error messages (see below)
- If left plugged in, the phone will be recognized on and off by the PC (althought sometimes not at all)
SYSTEM INFORMATION:
iTunes version: itunes version 9.0.2.25 64 bit
OS: Windows 7 64 bit
Processor: Intel i7 processor
Computer Model: HPdv8
ERROR CODES:
- 0xE800006B
- The iPod "Steve's iPod" cannot be synched. An unknown error occured (-6999).
- "... (-48)"
- "... (-69)"
ERROR MESSAGES
"iTunes could not connect to the iPhone because of invalid response from your iphone was received from the device."
"The iPod "Steve's iPod" cannot be synched. The required files cannot be found."
"Attempting to copy to the disk "Steve's iPod" failed. The device timed out.
I'VE TRIED
- Uninstalling iTunes (and all the other Apple software components) 3 times
- Completely erased both my itouch and iphone
- Turned off the USB power management option to shut off a remote device
- Disabled Bonjour
- My itunes library and songs are on an external HDD but i tried a new local library and that did nothing
- Uninstalled each USB root hub and then restarted4 days and no response...really??
-
Just signed up for Match but it never completes without crashing the iTunes program.
I get this report:
Problem signature:
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 11.1.3.8
Application Timestamp: 5274a87d
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.18229
Fault Module Timestamp: 51fb10c6
Exception Code: 80000003
Exception Offset: 0003491e
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 2057
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789Turn off itunes match on the device and sync music with itunes on your computer.
-
I have an iphone and it is obviously registered to my itunes so i have all my apps and music on it and my sister just got the new ipod touch and wants my apps and music and so i went to register it to my itunes to sync my music and apps to it just before her birthday but itunes crashed on one of the stages (the final stage i think) of registartion and so i had to close itunes and start it up again but it didnt give me the steps to register the ipod again and now when i connect it i go onto the ipod button and it is just blank with ipod written in the middle with no autofill buttons or sync buttons or any automatic fills and i cant drag music onto it either. Is there anything i can do?
- You need to restore the iPod to factory defaults/new iPod and start anew. Is the restore button visable in iTunes? If it is they restore the iPod.
- If it is not visible try resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- If the restore button is still not visable, try placing the iPod in recovry mode. See:
iPhone and iPod touch: Unable to update or restore -
Windows is not syncing ipod to itunes...
So I can plug in my ipod into another computer and it'll work, and I can plug a different ipod into my computer and it'll work. I've tried uninstalling and reinstalling itunes, trying different cords and usb ports.
I think I accidently hit the button on Windows 8 to make it open as a storage device upon plugin but I don't know how to delete this service if that's the case or delete the device from my computers memory.
Any help?See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- Then do the other actions of:
iOS: Device not recognized in iTunes for Windows
paying special attention to item #5
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates -
Fresh Install Windows 7 x64 IE 9 Flash Player Crash
Greetings All,
I am working on a major imaging prject for my organization. I'm getting ready to create a new image for some of our machines so I was getting the reference computers ready. I have noticed that when flash player is enabled in IE 9 it crashes the browser. I get the "Internet Explorer has stopped working" error. I can click the close program button, IE will try to launch the same page again and i get the error again with a bar on the bottome of the IE window stating "A problem with this webpage caused Internet Explorer to close and reopen the tab". After a few rounds of this I get the "Internet Explorer has stopped trying to restore this website." This is occuring on two different machines that I have been preping.
Here are the details of what I have done to these machines: (Dell E6420 and Dell E6320)
1. Installed Windows 7 x64 from install media (blanked the drive so fresh install)
2. Installed SEP 11.0.6200.754
3. Installed all drivers fresh off of Dell's website.
4. Installed Office 2010.
5. Ran and updated EVERYTHING from MICROSOFT update, SP1 and IE 9 included.
6. Went to Adobe.com and installed the latest Acrobat, Flash, and Shockwave Player from the links on the main page.
7. Rebooted and now anytime I go to any page with Flash objects I get the above error.
Here are version:
Windows 7 x64 SP1
IE 9.0.8112.16421
Shockwave Flash Object (Enabled in Manage Add-ons) 10.2.159.1
As said these are two brand new machines, two fresh loads, two batches of software fresh from the web, and two machines having unacceptable problems when Flash is installed. What's up here?
Many Thanks for your time!I’m going to take a moment and do two things, bump the thread, and provide a short synopsis on where we stand on this issue.
After much trial and error and the help of Chris I can say with relative certainty that this is an issue with compatibility between nVidia’s Optimus systems and Flash player’s hardware acceleration feature. I don’t know if the issue is just IE9 or IE8. I haven’t taken the time to try this on an Optimus system with IE 8 yet. If someone out there is running one of the Optimus enabled laptops with IE8 and the latest flash installed I would love to hear some feed back.
Ultimately IE8 vs. IE9 is an inconsequential issue. Soon Microsoft will start pushing IE 9 as an important update meaning that the problem will need to be fixed or we’ll be faced with more users having the problem.
I have posted about the issue in the nVidia forums, Dell forums, and Adobe forums. Please find the links to the threads below. I don’t believe the issue to be unique to just the two Dell models that I am dealing with. I have run across numerous complaints along this line from several different OEMs.
Here are some links of interest if you want to research and lend your voice to the cause:
Dell Forum Threads:
http://en.community.dell.com/support-forums/laptop/f/3518/t/19376814.aspx
http://en.community.dell.com/support-forums/laptop/f/3519/t/19376823.aspx
nVidia Forum Thread:
http://forums.nvidia.com/index.php?showtopic=199537
General Information on Optimus Systems:
http://www.nvidia.com/object/optimus_technology.html
nVidia thread where they admit a flash issue and promise a pending driver update (some months ago):
http://forums.nvidia.com/index.php?showtopic=191020
Good luck all! -
Clean Install of Windows 7 x64 and install of iTunes 10.5.2.11
I am having a problem with iTunes in that any time I click on a folder anywhere on my PC labeled iTunes it will launch iTunes. I also can not close iTunes if I have any folder named iTunes opened because iTunes will keep re-launching itself.
This can be reproduced even by creating a new folder on my desktop with nothing in it and labeling it iTunes. Once the folder is created I can click to open it and itunes will launch.
I have tried disabling iTiunes helper in my processes but it will still launch itunes.
I have also completely uninstalled iTunes and all Apple software including bonjur and deleted all remaining folders as well under both app data and my music.
Reinstalling the software yielded the same problem.
Any help on this would be appreciated.Hmm, I'm not familiar with Process Control. Google showed it to be a Win2K server utility.
Is it part of the SysInternal tools, now named Process Monitor?
If this is a new setup with not much else on the PC, you're right - it might be faster to just reinstall W7. But, it was a clean install before and this happened -- so it might do the same thing. Yikes.
Had a look at task manager > process tab again. In the Command Line column there are only a few programs that have this -Embedding switch. Flash, Windows Live email & WMP. Not sure where they are getting it from, as a registry search on "embedding" yielded nothing.
This vaguely reminds me of an old problem where itunes would take over all the PC icons
https://discussions.apple.com/thread/2397675?start=0&tstart=0
but not exactly, itunes is starting in your case and not taking over all your desktop icons. The fix for that I think, was to restore file associations as described here
http://www.sevenforums.com/tutorials/19449-default-file-type-associations-restor e.html
It working OK in safe mode is probably a huge clue, but nothing comes to mind as to why.
Did you try installing from a different windows admin user account? Did that do anything different?
Well, if you reinstall windows, remember to deauthorize itunes before you do it. -
I am trying to deploy Catia V5R21 on windows 7 x64 machines, deployment starts but doesn't not complete using sccm2012 R2
I can deploy software to windows 7 32bit machine fine using sccm2012 R2. Also manual install on windows 7 x64 works fine.
here is the script I am using-
cmd /c install.cmd
xcopy "IBM LUM Directory" "C:\ProgramData\" /E /C /R /H /K /Y
1\win64\startb.exe -u "c:\program files\Dassault Systemes\R18" -newdir -ident R18 -D "C:\ProgramData\DassaultSystemes\CATEnv" -l "DIC.slt" -v -noreboot
I can see files copied over client machine and "c:\program files\Dassault Systemes\R18" get created, also an entry appear in control panel>programs and feature.
Problem I am having is deployment doesn't complete.
I checked logs under Execmgr.log on client machine and found errors
Raise Program Error Event for program Catia. The exit code is 55, the execution is FailureRetry
Non fatal execution error 0x87d01100 encountered for program Catia V5R21
I can't see program installed under All Programs and SCCM monitoring status stuck in progress
Any help will be greatly appreciated..
Thanks in advance
RJ
RJ09I have tried following suing start /wait
start /wait xcopy "IBM LUM Directory" "C:\ProgramData\" /E /C /R /H /K /Y
1\win64\startb.exe -u "c:\program files\Dassault Systemes\R18" -newdir -ident R18 -D "C:\ProgramData\DassaultSystemes\CATEnv"
-l "DIC.slt" -v -noreboot
same results, deployment failed with exit code 55 and slight different error
IMaintenanceCodeinator::GetState failed with error code 0x87d00317
Monitoring status is In Progress..
RJ09
Maybe you are looking for
-
my iphone says its disabled and to connect to itunes but when i do it says the passcode needs to be typed in and i cant type it because my phone is disabled
-
ECC(IS Retail) between POS system
Hi in ECC where should i check aggreate sales trasactions, payment transactions at the day end. A) Does system creating single sales order, if yes where can i see... B) If i want report payment made through only credit cards and only cash and gift vo
-
Deadline moniter - Dynamic latest start / latest end date and time
Hi all, My requirement is to have the latest start and latest end time made dynamic. This is because each Personnel area or business unit has different requirements as to when they the notification and escalation to happen. For example - Business uni
-
Headphone jack distorted, but internal speakers fine?
I haven't even had it a day and I've already run into problems on my Macbook 2.2GHz C2D. It seems the internal speakers work just fine for music, but when I plug in headphones or earbuds into the output jack the vocals and anything that's not panned
-
IPad disabled, find my ipad offline - why?
My son managed to set a passcode on his restricted ipad and then forgot what it was, after 6 attempts the ipad is disabled as it should be. This happened at school. When he brought it home for me to fix, it wouldnt connect to the home wifi so therefo