Windows 8.0 new dual boot GUI disappeared and replaced with text menu after installing updated 8.0 and 8.1

I upgraded my windows xp to windows 8.0 and my windows 7 to windows 8.1 for a dual boot environment. I am using BCDEDIT program. I had no problem when booting to the GUI menu OF WINDOWS 8 when I first INSTALLED Windows 8. But after the second time
I booted from a cold start it defaulted back to the old text version of the dual boot menu from the old windows xp and 7 . I have tried many times to restore the boot mgr TO GET BACK THE WINDOWS 8 GUI but I can't seem to put my
finger on the root cause remedy  that would over-ride the default TEXT VERSION STYLE. I really like the Windows 8 GUI interface. Remember I am not having any problems with booting into the OS of my choice ----- just the BOOTMENUPOLICY.
Here is where I need to resolve the new from the old command. By the way Does the Bcdedit program need to be installed in both OS'S? And when original Windows 7 was installed the os partitioned a Boot 100mb. I cannot remove or delete it in my Disk Management.
Just some other tidbits to ponder from any help I would appreciate.
Thanks
Michael   

Hi,
What's the status of your current system boot option? Please check and make sure Windows 8.1 or Windows 8 was first boot.
Roger Lu
TechNet Community Support

Similar Messages

  • HT4623 Is anybody having trouble with your ringer after installing OS 6.0 and using the new GPS system?

    Is anybody having trouble with your ringer after installing OS 6.0 and using the new GPS system?

    The good (?) news is many people are have OS 6.0.1 wifi problems.
    I could not connect to my home network.  What eventually worked for me (twice now), though it makes no sense, is to go to the particular connection you want to use, hit the little blue arrow on the right to get the details screen.  Scroll down to the bottom and change "HTTP Proxy" from "None" to "Auto".  Then leave the "URL" field that pops up blank. 
    This should not work.  However, it has for me where many other suggestions have not. 
    *shrug*
    Best of luck.

  • HT1719 I have music on my Shuffle and want to transfer it onto iTunes but when I go to Sync it, it warns me that all the music on my Shuffle will be deleted and replaced with what's on my iTunes. I have a new mac-mini and my old computer was an HP.

    Can anyone tell me how to tranfer the music that is on my Shuffle to iTunes? When I go to Sync it, it gives me a warning that all the music on my Shuffle will be deleted and replaced with what is on my iTunes. I recently changed computers from an HP to a Mac-Mini and did not transfer/sync the itunes prior to getting rid of my itunes. So the music I had on itunes does not appear in my library. Help please!

    See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your new Mac and into iTunes.
    Recovering your iTunes library from your iPod or iOS device
    Then proceed to do the Erase and Sync or restore the device.
    B-rock

  • Hi, I've been trying for days to download Windows support software via Bootcamp assistant, but it always failed with message 'Can't install Windows Support Software because it is not currently available from the Software update server.' Any advice welcome

    Hi,
    I've been trying for days to download Windows support software via Bootcamp assistant but it always fails with message 'Can't install windows software because it is not currently available from the software update server.'
    Anyone else had problems or success with this?
    Thanks in advance.

    9thdoc wrote:
    I'm getting a similar but distinct error message in snow leopard: Download could not continue. "The windows support software is not available" and have no original snow leopard instal disc with me.
    Your issue is completely different. You are running Snow Leopard. There is no download for Windows Support software for Snow Leopard, hence the error you see. Snow Leopard Windows Support software is on the Snow Leopard installation disk.
    You need the Snow Leopard installation disk or a replacement for it.

  • My iphone is synced and backed up with another computer which is now broken... and i have synced it with a new one but when i want to do anything itunes says all data will be erased and replaced with the current itunes library?what do i do?

    my iphone is synced and backed up with another computer which is now broken...i have synced it with my new computer  but it hasnt transfered anything over to itunes and when i try to add anything to my iphone it says all data will be erased and replaced with the current itunes? i dont want to lose all my apps and music.... i dont know how to go around this problem? i want to back it all up and sync it properly to my new computer so that is now my main computer , so i can add ring tones and music etc with out it erasing everything ive got. any answers would be great and muchly appreciated. thanks, im not sure what operating system my iphone has either.....

    It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
    Use your backup copy of your computer to put everything on the new one.
    It sounds like you have failed to do this, which is not good at all.
    You will have to transfer your itunes purchases from your iphone.  Authorize your computer for your itunes account 
    About iTunes Store authorization and deauthorization
    Open itunes, plug in iphone, do NOT sync, click File>Transfer Purchases
    When you do sync you will lose your pics ( photo library - synced from your old computer), your itunes content ( music, apps, videos,etc) , your contacts and your calendars.  So do NOT sync yet.  This is why a backup copy is so important.
    Enter one unique contact and calendar entry on your computer.
    When you first sync, you should get the option to merger the data.  Choose it.
    If you want your pics, then you will need to e-mail them to yourself before you sync.  They will not be of the original quality as they are reduced when synced to iphone.
    When all is as goos as it can be, then backup your computer, and always maintain the backup.

  • I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    I am using Windows 7 64-bit. After installing Photoshop Elements 13 and trying to run it I always get the message: Photoshop does not work anymore. And it doesn't.

    Hi Hardy Tasso,
    Are you seeing this problem since first launch of PSE13 after installation or recently?
    Please try:
    Keep Ctrl + Alt + Shift keys pressed while launching PSE13 Editor and click OK on the dialog that comes next.
    Thanks,
    Anwesha

  • With the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

    with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

    We are users here.  We cannot possibly know when a new update will be available.

  • Macbook pro won't boot after installing update 10.9.3

    macbook pro won't boot after installing update 10.9.3

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • HT1473 How do I sync new purchased music onto my ipod without deleting/replacing with current library. I recently changed computers and new library doesnt have any of my playlists either.

    Hi All:
    I recently got a new computer, authorized new one with itunes and when I go into my library it has none of my playlists that I originally created. Also, I purchased new songs on itunes and as I did in the past, I connected my ipod Nano to automatically sync to get the new music and hopefully all my playlists would go into my itunes library and I received a message asking am I sure I want to delete all my ipod contents and replace with library contents? I canceled and dont want to loose my existing ipod collection as I have more songs on there than my itunes library plus my playlists are all on my ipod.  What I want to do is sync new songs to ipod and sync my playlists from ipod to my itunes library.
    Please help!!
    Thank you so much!
    Michelle

    Welcome to Apple Support Communities
    If you purchased all songs in the iTunes Store, plug your iPod to your Mac or PC and iTunes will ask you to transfer purchases.
    If you didn't purchase any song or you have non-purchased songs from the iTunes Store, you have to use an application to transfer the songs to iTunes. Here is a list of applications you can use for that > https://discussions.apple.com/message/11319208#11319208

  • How do I remove one failing hard drive from raid set and replace with new one

    Last Friday apparently one of my raid drives started failing.
    As I mentioned on this forum I started getting continous beeping.
    I was finally able to get the raid working at a degraded level.  I ordered a replacement hard drive which is arriving today.
    (In the meantime I made twice daily backups of my work.....)
    Below was the message I got from the browser based raid software:
    Blahblah 09    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 10    1000.2GB     Free                 SamSung HD103SJ
    Blahblah 11    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 12    1000.2GB   RaidSet Member SamSung HD103SJ
    (See this earlier thread if you wish!)
    http://forums.adobe.com/thread/727867?tstart=0
    At one point when I did the checked the browser interface I saw the message Failed and Degraded
    As I said, I was able to work over the weekend on the degraded system.
    This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
    In any case, the new hard drive is arriving today.
    What steps should I take to incorporate the new drive into the raid system.
    I have one OS drive
    and 4 tb raid drives.   One needs to be replaced with the new one that I am getting today.
    Thanks
    Rowby

    Harm,
    Regarding your comment:
    Re: How do I remove one failing hard drive from raid set and replace with new one
    Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
    If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
    Step 1: Identify bad drive serial number using Areca's tools
    Step 2: Turn off the computer
    Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
    Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
    Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
    Cheers,
    Jim

  • My iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work.

    my iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work. when i get it in DFU mode and try restoring with itunes it remains the same... provider already "fixed" this problem twice with a "software update" only to get the same problem again... it just "reboots" this time it happened @ night while charging... previous time in my jacket pocket... this is the 3th time it happens, and my provider (Mobistar belgium) doesn't wish to exchange or refund my iphone witch clearly has something wrong 3 times same problem in 3 months...

    imanfromsweden wrote:
    Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
    Please help....
    On belhalf of my fellow volunteers, the answer is, "We'll try our best." 
    My advice is to try not to treat this like it is a paid service provided by compensated professionals.  Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

  • HT5624 I have reset my password with my computer and I am in the process of updating my iPhone and I am at the enter password window and cannot continue

    I have reset my password with my computer and I am in the process of updating my iPhone and I am at the enter password window and cannot continue.

    The Password reset email sent----follow the directions in the email to reset your password is the message showing on my iPhone. I did not receive the email and reset my password using my computer. iPhone will not allow me to continue and is stuck in the above window. How do I enter my mew password on my iPhone?

  • After installing 10 .5.1 and buying itunes match I click add this computer and I get a window saying itunes has stopped working and itunes closes

    after installing 10 .5.1 and buying itunes match I click add this computer and I get a window saying itunes has stopped working and itunes closes

    I found that after I turned on geniuseverything worked

  • I have a new ipad mini an cannot sync it with my aol contacts.  Using a pc and when I goto itunes and click on the devices info tab it will not let me click sync contacts it just says "configure"

    I have a new ipad mini an cannot sync it with my aol contacts.  Using a pc and when I goto itunes and click on the devices info tab it will not let me click sync contacts it just says "configure"

    Hi,
    See if these Links for Home Sharing add any light to the problem
    Understanding
    http://support.apple.com/kb/HT3819
    Troubleshooting
    http://support.apple.com/kb/TS2972
    How to
    http://support.apple.com/kb/HT2688

  • HT1386 when I first bought my ipad I sync the ipad to my old computer.....how do i remove that old computer and replace with new PC?

    when I first got my ipad I sync the ipad to my old computer.....how do i remove that old computer and replace with new PC?

    Have you copied your library over from your old computer : http://support.apple.com/kb/HT4527 ?
    There are some instructions on this page for syncing to a new computer : https://discussions.apple.com/docs/DOC-3141

Maybe you are looking for