Windows 8.0 to 8.1 64bit update failed from store

Hi,
I am trying to update windows 8.0 64bit to windows 8.1 from store but update get failed is there a way I download windows 8.1 manually and update it 
Thanks 
Ehsan 

Hi,
Which version of Windows 8 did you use? Which error message did you encounter when you attempt to update from Windows Store? Is it in checking process or installation process?
Meanwhile, upload your CBS log file to OneDrive, post the shared the link in your next reply.
It could be found in below path:
C:\Windows\Logs\CBS\CBS.log
Karen Hu
TechNet Community Support

Similar Messages

  • HT4436 after reseting password for my Apple id I am not able to update apps from store

    After refseting password or my Apple id I am not able to update apps from app store

    Welcome to the Apple community.
    Once you've reset the password, you will have to sign out of that account and back into it on each device.

  • IPhone 4s Software Update fail (from 5.1.1 to 6.1.3)

    Hey everyone
    I have been holding back from updating my iOS on my iphone 4s (I know - not a smart move) I am currently still on 5.1.1 and trying to update to 6.1.3 (finally) from the phone itself (not via iTunes)
    I am trying to downlaod and install the update using Wi-Fi connectivity, but it just wouldn't let me? Kept saying An Error occured while downloading...
    It didn't give me any error code or any other explanation. It just simply won't update
    I know it was silly of me to begin with for not updating for so long, but I don't understand why my phone is rejecting the update? If this is even what is happening..
    Also I sent my iMac for repair recently, came back with a Lion (which was what I had on there previously anyway) but it wasn't updated? So I couldn't just open iTunes and restore all my contacts..
    AND I am still currently in the process of downloading the updates - but something always happens as well, an error occured that I have to re-download the update, internet drops on and off, etc.
    The reason I wanted to update was (this is a whole separate problem) my 4s kept crashing the apps, not doing anything out of ordinary - it just crashes everytime i start or a open an app. So I would hard reset my phone (turning it off and on again) and then I would find all my contacts gone. No other entries are gone, just my contact names! All messages and calendar entries are all still there - just no contact names in my address book. ***?
    After sleuthing here and there, and found no real solution to this problem. I decided to update my iOS because one of the discussion thread I found told me to try that. Heck, why not.
    SO I tried uploading and this is where I end up..
    Does ANYONE have any idea what the **** is going on? Does anyone else out tehre have the same problem? Surely this is not just me!!

    Thanks RajaRani. But I decided to sleep on it last night and did another attempt of updating iOS through iPhone and also through iTunes this morning.
    Everything works normal now! And I also got my contacts back. I am not sure what happened there, so unfortunately this thread would be of no help to anyone else if RajaRani's advice didn't work. Hopefully it works for everyone else though

  • Exchange 2013 update fails from SP1 to CU5

    Hi,
    Trying to upgrade my exchange server 2013 SP1 to CU5 but not able to do it successfully it is giving below error while analyzing prerequisites .
    Server is in test environment and it has 2 network interfaces.
    Error:
    There was a problem accessing the registry on this computer. This may happen if the Remote Registry service isn't running. It may also indicate a network problem or that the TCP/IP Netbios Helper service isn't running.
    #kkalas

    Hi
    Are those services running?
    Have you tried doing a restart and then apply the update again?

  • Updates failing from CC errors U44M1l216 and 49 - anyone else getting these?

    Photoshop CC and 2014 error code U44M1l216, Illustrator CC 2014 error code 49, and Bridge CC error code U44M1l216
    Had to reinstall Illustrator CC 2014 and now it's saying installation succeeded but a patch failed...

    This worked for me
    On a mac:
    User > Library > Application Support > Adobe > AAMUpdater > 1.0
    Delete the 1.0 folder. Quit and restart Creative Cloud. Update as normal

  • Updating itunes from Apple website...

    Hello,
    So I'm unsuccessfully trying to update my itunes on my windows laptop. If i were to update it from the 'Download itunes' page on Apple website (even though I already have it) would that update it, or instead would I lose all my music?

    If you are still having problems see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • Community Support Center (Photoshop Help) update fails...

    Each time I try to open the CSC it tries to update and fails, with the following error message: "the application could not be installed because the installer file is damaged"  Consequently, I can't use the CSC.
    I was able to find instructions for solving this problem for the MAC :  http://kb2.adobe.com/cps/867/cpsid_86752.html
    "Set the following directories to your User ID and not root:
    /User/[your username]/Library/Application Support/Adobe 
    /User/[your username]/Library/Application Support/Adobe/AIR"
    but can't find anything for Windows. I am running Windows 7.
    Is anyone able to translate those MAC instructions for use with Windows? None of the listed MAC directories apply to my PC.
    Thanks.

    Hi smithpc2,
    Welcome to Adobe Forum,
    Please check the below article and try the suggestions offered and check if that helps.
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshoot ing-steps-to-fix-most-issues.html#TroubleshootUpdates
    You can also enable the hidden administrator(windows) or root user (Mac) & try to update it from the admin account/ root user account.
    Incase if the issue is still not resolved, please contact Adobe Support.
    Regards,
    Rajshree

  • I have been trying to update Bridge CC and it immediately goes to update failed - learn more which I click on and all it give me is download error. retry or contact customer support(49). I have retried about 5 times now. All other updates finished success

    I have been trying to update Bridge CC and it immediately goes to update failed - learn more which I click on and all it give me is download error. retry or contact customer support(49). I have retried about 5 times now. All other updates finished successfully,

    Hi Dennis,
    Please refer to the thread below where this issue has been addressed:
    Bridge Update failed customer support(49)
    Updates failing from CC errors U44M1l216 and 49 - anyone else getting these?
    Installation succeeded but a patch failed
    Regards,
    Sheena

  • I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8

    I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8.

    I am running Windows 7 64 bit ultimate and have the same problem.  My hard drive crashed, installed a new one and then reinstalled CS5 extended.  Installation went fine, but can no longer open my camera RAW files from Photoshop (camera is a Canon EOS T2i.  The message also tells me I am not eligible for the update.  I am... and I cannot open my files and I could before.  I can find nowhere to contact Adobe to tell me how to proceed.  My daughter is all a registered user of the same product and she had no problems upgrading... we purchased ours each at the same time. I do know the difference is that I had to reinstall and she did not.  If that means anything.

  • Windows update fails, errorcode "WindowsUpdate_80246002" "WindowsUpdate_dt000"

    Hi.
    Mikael Nilsen here.
    When I try to use Windows update, I get the errorcode "WindowsUpdate_80246002" "WindowsUpdate_dt000"
    I have not installed any new programs, only updated Adobe Air.
    I tried to uninstall Adobe Air to check if it was the problem, but got the same errorcode, so why this came up I don`t understand.
    I hope you can help me with this, as soon as possible.
    Best regards
    Mikael Nilsen

    Earlier today, I had the same problem with Win 7 home 64bit. It started this morning, the last update
    in windows update history was KB2993651 installed yesterday 8-27-2014.
    9 hours ago,  tried these fixes:
     Ran the win 7 Microsoft Fixit Windows update repair tool.
     Downloaded Fix It Tool 50202 that completely re installs Windows Update components
     Renamed the SoftwareDistribution directory and restarted the wuauserv  service .
     Did the repair to .NET framework in the programs section of Control panel.
     Uninstalled yesterday's KB2993651 update via the Windows update history section.
     Ran SFC /scannow from an elevated cmd prompt, which found no file errors.
    None of the fixes made any difference, I still had the same problem, Windows update gave the same error code - WindowsUpdate_80246002 WindowsUpdate_dt000.
    I did reset the automatic windows update time to 2pm and Windows update did re-install the kb2993651 update that I just uninstalled 30 minutes earlier, however I could not manually check for Windows updates.
    UPDATE 9hours later..... Windows
    Update is working!!!    I have not done anything to the computer since I posted the above information, 9 hours ago
    when Windows update was NOT working. Windows 7 has been running since that last post with no reboots. I just checked for updates with Windows update and now it is working. I found 10 optional updates including .NET Framework 4.5.1 for Windows 7 x64. I mention
    that update since I did run the REPAIR .NET 4.5 framework (step 4 above) which completed earlier today, and now it found an update for it.
    At any rate, Windows update is now working. I have no idea what fixed Windows update since it did not work as I applied each fix earlier today. If I had the problem again, I would follow the 6 steps above, wait for several hours and cross my fingers that the
    problem will be fixed. 

  • My new 8th gen iPod nano is 'not recognized' by my computer. My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting...

    My computer runs on Windows 7, and I've installed and updated the latest versions of itunes etc, but still to no avail! I've tried different usb ports, troubleshooting, etc... But it still says "One of the USB decuces arrached to this omputer has malfunctioned and windows does not recognize it".
    The iPod is brand new, sent to me by Apple as part of the 1st gen replacement programme. I've been using the cable that came with the 1st gen iPod (I bought the first gen second hand) It always worked on my computer with the 1st gen iPod. So I was wondering, do you think I need to replace my cable in order for my PC to recognize my iPod or is it something else?
    Thanks

    Try a different cable. And are you connecting directly to your computer or through a USB hub?

  • Can't Install Itunes on Windows 7 64-bit due to unwanted updater

    OK, so I've known for years that Apple puts a WHOLE lot of crap on your computer when you install Itunes.  It asks you specifically if you want to automatically update Apple software, and no matter how hard you click the NO box, it puts the apple updater there anyway.
    I just purchased my first piece of Apple hardware, namely an iPod touch, and due to this failure of Apple to respect my software wishes, it turns out I've wasted my money because the Apple Software Updater fails to install due to security restrictions.
    I run the Itunes installer as administrator.  I have given full rights to my logged in Windows user to every folder related to Apple in the Program Data folder.  I have spent a couple of hours trying every fix that is availalble in the Apple forums and the Microsoft forums, to no avail.
    Seems to me the BEST fix is for Apple to drop the arrogance of forcing me to install the Apple updater in the first place, and trust me to know when I want to download a newer version of Itunes.
    This is not the first time I've seen this happen with 64-bit versions of Windows.   My guess is that I'll have to extract the Itunes app from the itunes.exe installer, and hopefully be able to install only the software I want.  But at the moment I'm kind of peeved that I have to jump through those hoops, and of course, it's entirely possible that won't work at all either.  And of course, without iTunes, the iPod touch is completely useless.

    Are there any special charaters in your user name? I know that has caused issues in the past. You might need to contact Adobe support for this one.
    Chris

  • Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    Running Windows XP service pack 3. Updated Firefox from 8.0 to 9.0. Now when Firefox opens "The URL is not valid and cannot be loaded" is displayed in a window and no home page appears. What's wrong?

    That issue can be caused by an extension that isn't working properly.
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started. How do I set FF back to open tabs in 1 window

    Tabs only open in a new window. Ctl T opens a new window NOT a new tab help-last update this problem started 2 days ago. How do I set FF back to open tabs in 1 window?
    There is no plus sign and going into optins and changing settings has not worked. I have uninstall FF and reinstall-keeping my personalization-and that was no help.
    Right clicking on FF Icon to open a new tab, or going up to FF drop down tab and clicking on new tab both do not work.
    Help everything opens a new window not a new tab. there seems to be no way to reset this or to chose a different optin. I just downloaded new tabs at end addon and it didn't do a thing.

    as a first troubleshooting step - does it work like normally when you open & run firefox in [[Safe Mode|safemode]] by pressing the shift key while you open firefox (all other instances have to be closed before)...

  • After an iTunes update failed to install iTunes won't open and I get lthe folloowing error messages.  Program can't start because MSVCR80.dll is missing, and iTunes not installed correctly. please reinstall iTunes. Error 7( windows errpr 126)

    After an iTunes update failed to install, iTunes won't open and I get the following two windows.  Program can't start because MSVCR80.dll is missing from your computer, and iTunes not installed correctly. Please reinstall iTunes. Error 7 (windows error 126)  When I reinstall I get the same messages and ITunes won't open.

    Click here and follow the instructions.
    (98815)

Maybe you are looking for

  • How do I get voice memos from an un-synced iPhone onto a MacBookPro?

    How do I get voice memos from an un-synced iPhone onto a MacBookPro? Problem: when I click Sync I get a warning stating "Are you sure you want to sync music? All existing songs and playlists on the iPhone "Jarrod Vassallo's iPhone" will be replaced w

  • MBP switches spaces when returning from screen saver

    When I move my finger minimally across the touchpad to bring my screen out of screen saver, invariably my MBP decides to shift spaces to the next to the left or right. It is annoying.

  • Dump in Condition tab in Business partner

    Hello, I am trying to create a business partner in the role sold to party in transaction BP, in CRM. Now, when i go on to enter the details in general data, and click on the condition tab, the system throws a dump. Below is the message: Termination o

  • Authorizations for Work books in BI7

    Hi BW Experts, I have created a work book by using BI7,and the requirement is to give authorizations to diffrent users to access that work book.I have tried a lot by using diffrent methods. Could any body can suggest me how to proceed. Thanks & Regar

  • Trying to create install script in PackageMaker...help for newbie

    Hello, I am trying to deploy a solution as an install package. Currently, there are 3 items inside the folder that needs to be installed in the /Applications folder. This in itself is easy. However, when I create upgrades to the solution, I want to c