Windows 8.1 64 bit Hibernbate issues

Hi after installing a Windows 8.1 64 bit i have a hibernate issuess Laptop doesn't go for hibernating all power remains on HDD and System system stuck between intermediate state niether in sleep mode nor in shutdown mode please me about this issue.
i have also installed a BIOS updates but issues remains same
Hp 15 Pavilion no37tx
Core i-5 4200U
4gb ram
This question was solved.
View Solution.

Hello @Ahmed-Aslam,
I have read your post on how your notebook computer is not able to hibernate correctly after re-installing Windows, and I would be happy to be of assistance!
To further diagnose this issue, I recommend following the steps in this document on Troubleshooting sleep and hibernate issues in Windows 8. This should help configure your power management settings successfully.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

SAP 4.6c with 32 bit kernel and Windows 2003 EE 64 bit - memory issues?

Dear Colleagues.
My apologies for this simple question. I would appreciate your assistance and expertise for this as I think I have confused myself and I would appreciate clarification.
Running an SAP 4.6c system on SAP Kernel 46D_EXT2 32-bit with Windows 2003 Enterprise Edition 64-bit and ORACLE 10.2 64 bit.
Could you confirm that there is still memory address space limitations due to the 32-bit SAP kernel?
It is the SAP Kernel that determines the addressable operating system limit for R/3 extended memory under Windows NT?
Do I still need to set the 3GB option on the system to allocate more than 2.5GB of SAP buffers and extended memory space?
I have taken a look at SAP Notes 110172 and 129813, but I just need clarification?
Thanking you in advance.
Kind Regards,
Alcatz

> Could you confirm that there is still memory address space limitations due to the 32-bit SAP kernel?
Yes.
>> It is the SAP Kernel that determines the addressable operating system limit for R/3 extended memory under Windows NT?
On a 64bit OS it is a bit different, effectively you can use 4 GB per workprocess.
> Do I still need to set the 3GB option on the system to allocate more than 2.5GB of SAP buffers and extended memory space?
No.
Markus

Deployment issue on windows server 2008(64 bit)

Hi all,
I am using crystal reports 2008 trial version for my web application. Its working fine in development environment but when I deploy application in windows server 2008 64 bit edition it shows following error:"An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required."
Is there any resolution available for this problem except for changing the IIS settings for 32 bit applications?
Rgds

Read the following [article|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e;jsessionid=(J2EE3417600)ID0244107750DB11172929121510648759End] as it goes over your issue.
Essentially you will have to set IIS to 32 bit at the least.
Jason

Qosmio X300 64 bit vista ultimate upgraded to windows 7 64 bit ultimate - issues

Hi there,
Hoping you can help me, any help would be greatly appreciated. I cannot find my laptop amongst the given models - first issue.
Second issue: given gratis CD voucher for upgrade to windows 7 ultimate with purchase of laptop, whihc i have redeemed and loaded to laptop. below are my laptop specs. And below that the consequent issues awaiting resolve PLEASE HELP!!!!!
OS Name Microsoft Windows 7 Ultimate
Version 6.1.7600 Build 7600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name SUZIQQOSMIO
System Manufacturer TOSHIBA
System Model Qosmio X300
System Type x64-based PC
Processor Intel(R) Core(TM)2 Extreme CPU Q9300 @ 2.53GHz, 2534 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date TOSHIBA V1.50, 23/12/2008
SMBIOS Version 2.5
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume2
Locale Australia
Hardware Abstraction Layer Version = "6.1.7600.16385"
User Name SuziQQosmio\Suzanne
Time Zone Cen. Australia Standard Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 3.75 GB
Available Physical Memory 2.10 GB
Total Virtual Memory 8.63 GB
Available Virtual Memory 6.48 GB
Page File Space 4.88 GB
Page File C:\pagefile.sys
Hi there,
Specs: as per Qosmio X 300. SSD 110GB, pentium core 4 extreme, 4 Gb RAM, plenty free storage on SSD (29GB), NVidia drivers with primary being GE Force 9800 M GTS, Direct X10. there is also a note down the bottom saying that if i have linked graphic cards (whihc i do i believe there are three), that i can expect better perfomrance with some software.
Ok I aplogise from the outset, i am a layman and not that techie. K. So the issue that I upgraded recently (last week) from vista ultimate 64 bit to windows 7 64 bit. ultimate. For the main, I am reasonably happy with the outcome in most areas - except gaming that is. I have increased speed and agility and the processor is now rated at 7.2. WEI. overall the laptop is rated at 5.8. however, getting back to teh reason for writing, I have nothing negative to say about windows 7 (as compared to its predecessor) apart from wishing to resolve my game crash issue. which usually occurs about 15 mins - 20 mins into a game and comes in the form of a shutdown ? BSOD from whence the laptop reboots when prompted at on/off and wants to know if to start normally or in various safe modes. I have noticed that the laptop does become very hot at the back (around the fans) prior to teh shutdown, and i am wondering if this is an overheating issue, and how to resolve if this is the case. the only other thing i have noticed that seems untoward is that i have apparently lost a wireless jump start driver from the upgrading process which i cannot find anywherre, and may be totally unrelated to this issue anyway.
All i want to do is play the games i could play on windows vista ultimate 64 bit. these include: Sims 3, sims 3 world adventures, sims 3 ambitions, highloft end stuff, and Bioshock. Oddly enough, i have played sid meyers civillisations revolutions IV (the latest one) with no crashes, and i havent tried ANNO 1404, but fear a similar fate may await this game as some of the others.
Addditional information:
everything is as i described it above, however the screen does not go blue but black,and the laptop shuts itself down, laptop acts as if hibernating mode? (these are guesses) or some mechanism geared at preventing over heating - the back becomes very hot. the machine can be rebooted from normal mode but comes up firstly with a screen suggesting that the laptop was incorrectly shutdown, and offers options as to safe mode, normal etc. i have been starting normally with no adverse effects. This is scenario one.
scenario two ends up similarly at teh reboot stage, but gets there differently. i play the game and the screen freezes, unable to move touchpad curser, unalbe to use ctrl alt del to get up task manager. end up having to crash to reboot.
I am quite frustrated and very reluctant to mess around with things that i dont understand (dont want to make the problem worse!). I am happy to attemtpt to follow your good explicit advice.
the only other negative thing i am expereinceing is screen flicker on internet. I have changed my power mode from high performance to balanced to try to nullify the overheating issue but i now am noticing this screen flicker which is irriating and appears on keystroke, or cursor movement.
Please note well: I am a layman, not a technician! Please explain in easy to (dummy) terms! Thanks!
kind regards
S
(Im Game)

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
-Griff W.

Officejet 7310 Installation Issue(s) with Windows 7 Pro 64 Bit OS

Recently purchased Windows 7 Pro 64 bit OS platform laptop. Downloaded latest driver for All-In-One and executed. Followed USB connection directions, Windows Driver installation indicated all drivers installed completely, but the last step (configuration) failed (after running about five minutes).
Device Manager indicates "Officejet 7300 (DOT4PRINT)" under "IEEE 128.4 compatible printer" normal; also indicates "Officejet 7300 series (DOT4USB)" under "USB controllers" normal... One can print without any problem.... Other than the failure message at the end of the installation, the "HP Solution Center" won't launch....error message includes: "HP Solution Center cannot run because your device installation is not complete."
I have completely uninstalled and reinstalled to no avail.... I would appreciate some help. thanks.... Jim

Hi JRParker,
This document on A 'Fatal Error' (MSI error) Displays on the Computer During HP Software Installation in Windows will assist in narrowing the cause of the installation interruption.
I will need to know if you see a four-digit error code, or if the message contains a ".msi" or ".dll"
file association.
Please take a screenshot of this error message by:
1.) Clicking on the Print Scrn
2.) Open Microsoft Paint
3.) Click on File, then Paste. The screenshot should appear on the canvas.
4.) Click File, then Save as. You will have an opportunity to save the document to the desktop with a unique name.
5.) Click Save.
I am looking forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I have a Windows 7 Professional, 64 bits on my computer and have recently installed iTunes 11.1.3.8. but i started having this msg :"The folder iTunes is on a locked disk or you do not have write permission for this folder" issues: how can i solve it?

I have a Windows 7 Professional, 64 bits on my computer and have recently installed iTunes 11.1.3.8. but i started having this msg :"The folder iTunes is on a locked disk or you do not have write permission for this folder" issues: how can i solve it?

Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and SYSTEM full control of this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
If it won't let you change the permissions use the Owner tab to take ownneship from an account with administror privileges.
tt2

ImageFORMULA P-215 Scan-tini Software Issues with Windows 8.1 32-Bit Laptop

Hi,,
I have a ImageFORMULA P-215 Scan-tini scanner which worked without any problems with my Lenovo X230 laptop running Windows 7 64-bit. However, I have been unable to get the CaptureOn Touch software to work on my Asus Transformer TA100T notebook running Windows 8.1 32-bit. The software and driver installation completed without any errors (without the scanner connected). But when I connect the scanner into the USB port and run the Capture On Touch software, it always comes up with a Microsoft Visual C++ runtime library error - Program C:\Program Files\Canon Electronics\P215\TouchDR.exe abnormal program termination.
I tried every possible troubleshooting approaches I could Google online including (1) doing running sfc /scannow (which found no integrity or corruption issues with my Win 8.1 system, (2) did a clean reboot disabling everything except the CaptureOn Touch software and it still comes up with the same error, (3) installing Visual C++ runtime library distributables for 2005, 2008, 2010, 2012, 2013 but still the error pops up. So basically, now I can't use this great little portable scanner with my great little transformer tablet/notebook.
I am wondering whether anyone else have come across a similar problem of getting this scanner to work on a 32-bit Win 8.1 system? Would greatly appreciate any advise.

Hi:
I would try the Vista audio driver from your notebook's support and driver page.
the dv6000 model series is not supported by HP for W7 let alone W8 or 8.1.

Issues with creating PDF's (Acrobat 8.1.6. and 9.1.3) in Windows Server 2003 (32 bit) and Windows XP (64bit)

We have a report package that generates customised reports
We generate the PDF's by simply "printing" to the Adobe PDF printer
In Windows XP Pro (32 Bit) the report creates the PDF perfectly
In Windows Server 2003 (32 Bit) or Windows Xp Pro (64 Bit) the PDF is created 90% perfect but some of text has slipped on the page.
Whilst we are looking into the report writer (Dev Express) I would like to rule out any Acrobat issues.
With thanks
Mark

I think it will work fine if you use the "Enterprise" authentication option. It may have dependencies on 32 bit components. So, that's why we must run IIS in 32 bit mode even though it's on a 64 bit OS. That means CR supports 64 bit OS systems only if you bring down other components that CR uses to 32 bit levels. I'm not sure if that is considered "full support".
We are trying to use the LDAP authentication option, but that tab is disabled. Other tabs such as Active Directory and WinNT are disabled as well. There maybe another component that we must bring down to 32 bit processing.
Is there a way to enable the LDAP authentication configuration tab?
thanks

Backup issues - New T510 running Windows 7 Professional (64-bit)

I am running Windows 7 Professional (64 bit) on Lenovo T510 (4313-CTO). As soon as I loaded some applications and transferred data from my old computer to “My Documents” in the “C” partition of the T510 I immediately began having space issues with automatic backup. I received the following alert:
Low Disk Space.
You are running out of disk space on Lenovo_Recovery (Q
Click here to see if you can free space on this drive.
The "Q" partition was pre-set by Lenovo at 9.76 GB. I have not tried to change it (yet).
I set the backup options to “Keep only the latest system image and minimize space used by backup.” Note that I viewed backups and it lists only one backup image on the “Q” partition (given the warning message, perhaps even that is only a partial image).
Properties for the “Q” partition indicate
Used space: 10,476,949,504 bytes 9.75 GB
Free space: 8,806,400 bytes 8.39 MB
Capacity 10,485,755,904 bytes 9.76 GB
What do I do at this point to complete a backup?
If relevant to your suggestions, here are some specific questions about solving the problem:
How can I manage backups to the “Q” partition given the space issue – i.e., do I need to reallocate partitions on the hard drive to create a larger “Q” partition, or are there other options?
Related to my first question, can I create sufficient backup space without reformatting the hard drive and destroying content on the “C” partition?
Would the better choice be to use DVD media for backup – since using the “Q” partition on the same hard drive leaves it vulnerable to failing at the same time as the “C” partition?
Any other ideas?
Thanks, in advance, to all who are able to respond. Peace … E

Thanks Nap.
To Nap and others
Got it on back-up. I did not initiate a backup but assumed that the error messages that I am receiving were caused by a Lenovo auto-initiated backup. What can I do to elminate the error messages I am receiving (see my prior post).
Peace ... Ed

Windows 7 ultimate 64-bit boot camp issues...

Whats up guys?
So here is my problem:
I installed windows 7 ultimate 64-bit on my macbook. The install went great and everything works like a charm except my headphone jack is red, and i have no audio, and no wifi. I installed 3.0 drivers from my Mac OS X 10.6 Snow Leopard disc, and updated to 3.1, and it seems the update fails. This is the third day i have been trying to fix this, and i cant find anything. Apple doesn't even know what to do! I have tried DLing realtek drivers, nvidia drivers, intel chipset drivers, EVERYTHING! I don't know what to do, but i need windows for my new job! Any help will be greatly appreciated!
Josh

Yeah i have done that a couple of times. When i navigate through the disk it doesn't even let me run setup.exe, so i installed from bootcamp64.msi. Then after 3.0 installs, i try to update to 3.1 and after the nvidia install, it just quits. When i use my version tracker it says that boot camp is in version 3.0, and it shows an update for 3.1 in software update. Now when i go to uninstall programs, it shows boot camp 3.1 is installed.
As far as the audio, i have tried that as well. If i manually put a driver into that device, it fails on every reboot. It only shows working on Microsoft High Deff Audio Drivers( and it actually dosnt even work, it just glows red on my head phone jack.)
Im stumped.

Installing Windows Vista Ultimate 64 bit on Bootcamp issue

Hi I'm a newbie, I would like to install Windows Vista Ultimate 64 bit using boot camp. I went into boot camp to partition and split the 1 terabyte hardrive. half is for Leopard, the other half is for Windows Vista.
I followed the steps and popped in the disk, awhile later I get a message saying "Where do you want to install Windows?"
It's showing:
Disk 0 Partition 1 200 mb primary
Disk 0 Partition 2 466 gb Primary
Disk 0 unallocated space 128 mb
Disk 0 partition 3 Boot camp 464 gb Primary.
which ever one I click on it says "Windows Cannot be installed to this hard disk space. Windows must be installed to a partition formatted as NTFS"
I can't get passed this part, what do I do?
Any help is greatly appreciated

Hi Stuart,
Vista needs its system partition to be formatted with NTFS.
The BootCamp Asistant does a pre-format with FAT32 since OSX can not write to NTFS partitions (only read).
Therefor you have to reformat the Windows partition with the Vista Installer to NTFS.
See page 11 of the BootCamp Setup Guide found here http://www.apple.com/support/bootcamp/ (and it's also part of the BootCamp Assistant).
Regards
Stefan

Issue with adobe acrobat 7.1.0 standard on windows 7 professional 64-bit

hi,
i have been using my aa 7.1.0 standard with windows xp professional sp2 32-bit for over a couple of years with great ease.
recently, i upgraded to windows 7 professional 64-bit. when i reinstalled aa 7.1.0 standard on that, i hit a wall. i get this error 20225 which says that the adobe pdf port and printer could not be created. i have tried detect and repair, that just repeats the same error. i have scoured through several webpages to find out a solution, but to no avail. there was one suggestion that a printer port be created manually, that did not work (as i could not find the suggested inf file).
can someone please suggest what i can do to get my beloved aa 7.1.0 standard to work with my beloved windows 7 professional 64-bit?
kind regards,
am.

Another thing to consider when using Acrobat 7.x is that Adobe has announced Acrobat 7.x support ends December 2010.

Laserjet CP2025 share issue (64-bit drivers from Windows Server 2003 32-bit).

Hi,
We are migrating our Desktops from XP 32-bit to Windows 7 64-Bit and I'm trying to update all of our printer drivers on our Print Server (Windows server 2003 32 Bit).
I am adding the new drivers by opening up each printers properties on the print server, going to Sharing and then add new driver and directing it to the relevant folder for the 64-bit drivers for the printer.
Every printer (HP, Panasonic, Brother) has worked so far, except for the HP Laserjet CP2025. The Net Express installer doesn't work. Nor do the Universal Printing Drivers (PLC 6). Does anyone know a way around this?
Thank you.

Can anyone help with this? I'm in a difficult position with this. Any help would be appreciated.

I am using Windows 7 Pro, 64 bit on a brand new PC, and cannot connect to the iTunes store using iTunes version 10. HELP!!

Ok, so after purchasing a new computer, with windows 7 pro, 64 bit, I tried downloading the newest iTunes, which at the time was 10.2.1 (i believe). After installation, everything seemed to work, except that iTunes was unable to securely connect to the internet, use home sharing, or validate my computer.
As troubleshooting, I first ran msconfig, and then turned OFF all programs that boot at start up EXCEPT itunes and quicktime. After a restart, i opened itunes again, and got the same result. That led me to believe that iTunes was NOT being blocked by another program on my machine. I am currently running itunes 10.7 successfully on a Windows 7 32 machine at work. Anyhow, for grins, I tried to install version 9 on the new computer, and it installed perfectly, and immediately connected to the itunes store, leading me to believe that there is nothing wrong with my software configuration (not sure if this is a safe assumption or not). I then tried to let iTunes update itself using the automated update function. It tried to update itself to the most current version, then 10.6. Again, iTunes was unable to connect to the iTunes store. I HAVE tried disabling the anti-virus software (AVG), but that made no difference.
I have since gone back and reinstalled iTunes 9. Here's the catch though. When I reinstalled using version 9, I had to redo all my library files. I'm about 1/2 way through my CD's, and now have a substantial library file going. The last time I let iTunes update itself to 10.6, once I realized that it was not going to connect to the store, I uninstalled iTunes, and reinstalled ver. 9. However, when I did this, it told me it could no longer open the library file, because it was a newer .itl or .xml (i believe it was one of those two extensions) library file. At that point, I basically started everything over again, using version 9, and have been importing CD's like a madman at night.
Here are my questions:
1) Is there a way to make a copy of the files that store my library info, so that if my upgrade to ver 10 IS NOT SUCCESSFUL, I can restore ver 9, but still have all of the album art work, playlists (when I import music, I create a playlist with the artists' name, and store things that way), etc. in tact?
2) What else can I try (firewall settings, internet options, etc.) to try and get version to to successfully install? I would really like to get all the benfits of the newer versions.
3) When I tried to get apple tech support before, they wanted me to pay a ridiculous 69$ fee for phone support. I just bought an iphone 5....this should entitle me to a fresh 90 days of phone support, right? The reason I ask here is that I could hardly understand the "tech" that answered the phone when I called for tech support last time, and to be honest, it really ****** me off that they wanted to try and milk me for another 69 bucks....I've purchased every iPhone since the 3Gs came out (pre-ordered at that), and have nearly gone broke purchasing music from their iTunes store....heck, maybe they're doing me me a favor not letting me into the store, huh?
Any help or ideas would be greatly appreciated,
-Brian

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Photoshop 7 (& other old Adobe programs) installation in Windows 7 Pro 64 bit

Recently I purchased a new computer running Windows 7 Pro (64 bit) with 2 TB hard drive and 16 GB memory and faced the task of trying to install Photoshop 7, Illustrator 8, Acrobat 8 Pro, and Dreamweaver CS3 that I had used very satisfactorily on my old Windows XP SP 3, 2GB memory computer with less than 1 TB hard drive. I now have all of these running successfully on my new computer and thought I would share here my experience gleaned from a number of other forums after many hours. I had the most problem with Photoshop 7 which I will describe last. In all cases I had the original genuine installation disks. These are generally needed except for Illustrator 8.
Dreamweaver CS3 -- This installed easily in the Program Files (x86) folder & does not seem to require running in XP compatibility mode
Acrobat 8 Pro -- Same as Dreamweaver CS3
Illustrator 8 -- The installation disk would not work for Windows 7 Pro 64 bit. A solution I found in a Microsoft forum is simply to copy the Illustrator folder and contents into the ProgramData folder on the new computer along with the following dll files in the C\Windows folder of the old computer: icccodes.dll, kpcp32.dll, kpsys32.dll, pcdlib32.dll, pfpick.dll, sprof32.dll These go right into the Illustrator folder. This program needs to be run using XP compatibility mode (after copying preceding files go to Control Panel --> Programs --> Programs and Features --> Run programs made for previous versions of Windows -- follow directions there). It might be possible to copy into the Program Files (x86) folder too, but the ProgramData folder works. I have not actually used Illustrator after doing this, but since it started ok, I presume that there will be no problems.
Photoshop 7 -- My Photoshop 7 was an upgrade from Photoshop 5. The PS 5 installation disk would not run on Windows 7 & when I tried the PS 7 upgrade disk (autorun) I got the message that it could not find a previous version of PS & then shut down the installation. I tried the method used for Illustrator 8 above (suggested on yet another forum with an additional dll identified in another Windows folder), but I got the message "Could not complete your request because of missing or invalid personalization information". This evidently had to do with missing authentication serial code number in the registry. I found some discussion of this in forums but no workable fix in my case which involved an upgrade. Then I discovered inormation in another forum which explained that installation with the disks could be done by inserting the upgrade disk and running it from the setup.exe file instead of autorun. When you do this you are presented with the option of proving your previous version of PS by simply inserting the earlier version PS disk at this pint of the process. After doing this the installation with the upgrade disk proceeds fine. The PS 7 program can be installed in the Adobe folder within the Program Files (x86) folder. However, after doing this and trying to start PS 7 you get the following error (if your hard drive is 1 TB or greater in capacity): "Could not inititialize Photoshop because the scratch disk are full" After much reading I learned that this occurs because PS 7 apparently cannot recognize partitions (volumes) 1 TB or greater. What you need to do is set up an additional partition (volume) on your hard drive. This is easy to do. Go to Windows Help, search on "create partition", choose "Create and format a hard disk partition", and follow the directions. I decided to make a 50 GB partion I named "scratch". The system will assign a drive letter to it. To use the new partion to allow PS 7 to start you need to start PS 7 and immediately press the ALT and CTRL keys together. This will bring up a window where you tell PS 7 which drives to use for its scratch disk. You need to select the newly-created scratch disk(partition) in the first choice and leave the other choices as "None". After doing this you have one last issue. When you try to save any file in PS 7 you cannot save it directly anywhee on the C drive since that drive is 1 TB or greater. What I do is save it to the scratch drive and then later move it from there to where I want it on my C drive. I have seen it suggested to install the PS 7 program itself on the newly-created scratch drive, but I don't know if this would allow saving files to the C drive. When installed the way I have described it does not seem to require operating in the XP compatibility mode.
Hope this helps those of you who prefer working with the programs they are used to on Windows 7 Pro 64 bit.
Ray

Hello Nikhil.
Can you see here?
MAIN MODULE INFORMATION:
   SAP GUI for Windows
   SAP Logon Pad for Windows
   730 Final Release
   7300.1.0.1074
   1337608
SYSTEM INFORMATION:
   Operating system: Windows 8 Pro 6.2 (9200)
You are using patch 0 for Windows 8
Windows 8 is not supported until patch 1 or higher is applied, and for Windows 8.1, you must use
Patch 7 or higher,.
Apart from that the error is not from the GUI side,
See below:
Previous frontend interpretation time   :           109 ms
Previous server response time           :          5078 ms (for 1 roundtrips)
The frontend interpretation time is only 100 ms whereas the server time has taken 5000 ms
Please use a supported version for the OS you intend to use.
You can find this information in note
http://service.sap.com/sap/support/notes/66971
Jude

Windows 8.1 64 bit Hibernbate issues

Similar Messages

Maybe you are looking for