Windows 8.1 64-bit is not being installed.

I need to upgrade my 32-bit Windows 8.1 to 64-bit Windows 8.1. My processor also does support 64-bit operating system. But when I boot it, my LCD displays a message "Out of Range". What type of problem is it? Whether is it LCD resolution problem
or hardware problem? What should I do in either problems?

Hi,
The “Out Of Range” error message indicates that you have exceeded the maximum possible video resolution or horizontal & vertical frequency that your display device is capable of using. Lower your input resolution and horizontal/vertical frequency to one
that is listed as compatible in the display device specifications chart.
For the issue,I would like to know your display size.19" or 23"?
Meanwhile,resolution is related to display size.It's not related to your operating system.
If your PC has a 64-bit capable processor (CPU) but is currently running a 32-bit version of Windows, you can install a 64-bit version of Windows 8.1, but you'll need to buy it as a DVD and perform a clean installation. You won't be able to keep any files,
settings, or apps when you update from a 32-bit to a 64-bit version.
I would like to share the following article:
32-bit and 64-bit Windows: frequently asked questions
http://windows.microsoft.com/en-us/windows7/32-bit-and-64-bit-windows-frequently-asked-questions
Some knowledge also apply to windows 8.1.
Regards,
Kelvin hsu
TechNet Community Support

Similar Messages

Hp laserjet p1006 is not being installed on window server2008 64 bit

hp laserjet p1006 is not being installed on window server2008 64 bit

Hi,
The printer is not supported on Windows Server 2008, only the operating systems listed below are compatible:
http://support.hp.com/us-en/product/HP-LaserJet-P1000-Printer-series/3435682/model/3435683/drivers
The latest supported server OS is Windows 2003. any newer Server OS is incompatible with the printer.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I've had my ipod shuffle (2nd generation) for a long time now and after a year and a bit of not being in use it doesn't work. When I connect it to the computer it doesn't come up. Can my ipod be charged or fixed?

I've had my ipod shuffle (2nd generation) for a long time now and after a year and a bit of not being in use it doesn't work. When I connect it to the computer it doesn't come up. Can my ipod be charged or fixed? Please help!

That is about normal. You can maximize battery life by changing some settings. See:
Apple - Batteries - iPod
Apple will exchange your iPod for a refurbished one for with a new battery for $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace your battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. You can purchase a replacment for about $10
iPod Touch Repair – iFixit

Windows 2008 server (64 bit) setup not starting?

To all,
Windows 2008 server (64 bit) setup not starting? downloaded v17228-01-2of2 and v17228-01-1of2? Any ideas why the installer not starting?

Installing oracle database 11g( 64bit) on a windows 2008 server (64bit). I do not get the setup tool to start
Downloaded
Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64 (Part 1 of 2) V17228-01 Part 1 of 2
and
Oracle Database 11g Release 1 (11.1.0.7.0) for Microsoft Windows Server 2008 x64 (Part 2 of 2) V17228-01 Part 2 of 2
Edited by: user731811 on Oct 14, 2010 1:11 PM

My LR 5.7.1 running on Windows 8.1 64-bits can not edit a image on PS CC 2014...

My LR 5.7.1 running on Windows 8.1 64-bits can not edit a image on PS CC 2014...

This will happen if you are in the Library Module and viewing images in the grid but you do not have any photo file selected. Select an image and the options should be available. see the screen capture.

I ran into the issue of the 32-bit file not being recognized in LR 5.6

I ran into the issue of the 32-bit file not being recognized in LR 5.6 after it has been saved in PS. I tried every type of file I could save a file as in CC but none of them would be recognized or said it was corrupt. I had exported 3 files to Merge in HDR Pro Photoshop as 32 bit files. I then saved in PS and returned to LR 5.6, but it said the bit depth was not supported . Is this a known issue with LR 5.6 / PS CC?

Hi,
this might help: Video Tutorial – 32-bit HDR TIFF files in LR 4.1 « Julieanne Kost's Blog (Only 32 bit TIFF is supported).

Firefox 3.6.11 / 3.6.12 is not being installed / not opening in my Mac 10.6.4 Plz Help.

Firefox 3.6.11 / 3.6.12 is not being installed / not opening in my Mac 10.6.4
Please Help.
- Bhavesh

Firefox 3.6.x versions are still updated with security patches (Firefox 3.6.18 is due in about two weeks).
You are unfortunately out of luck with an Intel Mac and OS X 10.4.11.<br />
There is a compatible version from for a PowerPC Mac, but no alternative for an Intel Mac.

TS1814 I have purchased iPhone 3g device from my friend, I connected it to the iTunes to upgrade from 3.1 to 6.0 as many softwares were not being installed as iOS was not up to date. I upgraded but now I can not activate my device. What I should do now???

I have purchased iPhone 3g device from my friend, I connected it to the iTunes to upgrade from 3.1 to 6.0 as many softwares were not being installed as iOS was not up to date. I upgraded but now I can not activate my device. What I should do now??? i am really feeling difficulty because i have been disconnected from the network.
I am from Pakistan.

The 3G cannot be updated to iOS6, it can only go to iOS 4.2.1.
Activation issues are generally the result of the device being hacked or jailbroken.

Windows 8.1 64-bit ISO Not Recognized in Bootcamp

I am attempting to install Windows 8.1 64-bit via Bootcamp on my mid-2010 15-inch MacBook Pro, but the ISOs and bootable USBs all include both the 32-bit and 64-bit versions of Windows 8.1 and I receive an error message "Bootcamp only supports 64-bit Windows installation on this platform. Please use a ISO file for 64-bit Windows installation." It appears that Bootcamp is detecting the 32-bit version and ignoring the 64-bit version so I am unable to install.
I have tried editing the Bootcamp Info.plist to make my MacBook Pro (MacBookPro6,2) eligible for the 32-bit installation, but the error still appears.
Does anyone have a solution for how I can install Windows 8.1 with Bootcamp?

I get the same error, but I'm using a 64bit only Windows 8.1 ISO and different target hardware. I haven't found a workaround anywhere. I'm trying to install Windows 8.1 on a new iMac 5k* using the Bootcamp Assistant Version 5.1.2 (497) included with Yosemite 10.10.1. I bought Windows 8.1 on a Windows 7 PC and used Microft's mediacreationtool.exe utility to create the 64-bit-ONLY iso. The utility allows you to select the Edition of Windows 8.1 (vs 8.1 Pro), the language, the architecture (32bit x86 or 64 bit x64), then you can select the media type: bootable USB or ISO.
i Selected the English 8.1 64bit ISO and copied it over the LAN to the iMac since it doesn't come with an optical drive.I launched Bootcamp Assistant and che ked all 3 available Checkboxes as described in the instructions, browsed to the ISO image, selected the FAT32 formatted USB stick and clicked continue, that's when I get the error about 64 bit Windows is required, the same as the title of Bill W's post above.
I Created the ISO again just to make sure 64 bit was selected and got the same results. I Rebooted, same result. Others said they just copied the ISO to their documents directory and that fixed it, not for me. Others said they just had to rename the ISO to DMG, that didn't work for me either.
In another article here, someone suggested modifying the info.plist for Bootcamp Assistant, I tried that, same result as several others, problems with unlocking and replacing the edited .plist file.
When I examine the files in the ISO on the PC, there's nothing to indicate that there are two builds to support both Windows architectures. Other people claim they've installed Win 8.1 on this hardware successfully using the same technique.
Any ideas? Any additional info required?
Thanks in advance! Is there a way to cross-post this in other forums or threads if this is not the best place for it?
Matt
*My iMac is close to its factory state (I some App Store apps), iMac (Retina 5K, 27", late 2014, Model ID 15,1), Yosemite 10.10.1 (Build 14B25), i7, 3Tb Fusion, 32Gb RAM, 295M w/ 4G, SanDisk Cruzer Edge Media brand USB memory stick with 16Gb for use with Bootcamp. 1Tb free space on Fusion drive, was planning to allocate 100Gb out of that for Windows.

HT2292 Windows 7 Pro 64-bit does not recognize iPod Shuffle (4th Gen)

I have tried every trouble-shooting recommendation, suggestion, guess, etc. that I could find related to this issue and have had zero success getting either of my two computers to see a brand new iPod Shuffle (4th gen). I have gone through all of the steps in http://www.apple.com/support/ipodshuffle/assistant/itunes/ and http://support.apple.com/kb/TS1369 with no progress. I have tried 7 USB ports on two different computers (both running Windows 7 Professional 64-bit). The iPod Shuffle's little light stays a solid green when plugged into the port. I have uninstalled and reinstalled the latest version of iTunes. In Device Manager, I have uninstalled all USB devices. I have turned off all firewalls and virus protection. I have run Windows Update. I have verified that the Applie Mobile Device Driver is running. I have reset the iPod Shuffle.
When I plug the iPod Shuffle into the computer, no notification pops up, no new device shows up in the Device Manager or My Computer, and no device is displayed in iTunes under Devices. If I scan for new hardware, I get nothing. I even found a proprietary software that verifies communication between the computer and iPod - the result was that "no iPod is connected".
Please help.

Have you tried a different cable that connects from your ipod to your PC? You could simply have a bad cable / dock.

Help -- New Windows 7 Ultimate 64-bit BSOD - nothing new installed

I read through the suggested forum questions and found nothing helpful.
My 2-year old Dell XPS running Windows 7 Ultimate 64-bit decided three days ago to give me the BSOD (while I was away and the computer was just in idle/sleep since I rebooted just before I went away). It has had no new hardware or software recently installed.
That leads me to conclude it might be an update. Safe Mode and Safe Model with Networking seem to run fine. But even when I Restore to a known good configuration from a month ago, it still BSODs on any updates -- Windows, Firefox, System Mechanic, etc. I even
de-installed Adobe Shockwave since it appeared to have done an update while I was away, but that hasn't helped.
Suggestions?

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Prefered sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
Please note that any "cleaner" programs such as TuneUp Utilities, CCleaner, etc, by default will delete .DMP files upon use.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick

Flashplayer apparently not being installed on my computer

Hello. I previously have been prompted to install the lastest version of Adobe flashplayer with Google Chrome. I have installed, uninstalled, reinstalled, unistalled, reinstalled-over and over again. It still is not registering as being installed on my computer as when I return the Pogo.com I still am prompted to install the lastest version. Now I attempt to access a local news station's website, and am prompted to download the lastest Adobe flashplayer before I can view the stories. Again, I download the newest version, and again it does not work. Can someone please tell me what is going on??? Thanks so much!!

Run the Flash Player Uninstaller as applicable for your machine(i.e.Windows or MAC) and remove flash player.
For MAC : http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
For Windows : http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
Restart the machine.
Download and Re-install Flash Player.
Restart the browser and check.
You might also wanna check the below articles ::
Enabling Flash Player in Internet Explorer 9 : http://forums.adobe.com/thread/885448
ActiveX Filtering in Internet Explorer 9 : http://forums.adobe.com/thread/867968
[Moving the discussion to Installing Flash Player Forum]

Itunes 64 bit will not complete install for windows 7?

When I attempt to install iTunes 64 bit for windows 7 the installation process stops and the follwoing message appears:
"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
Any idea how to fix this?

"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor."
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Windows Explorer for Windows 7.1 32-bit does not display pdf title

Using Adobe Reader XI version 11.0.08 the pdf title does not display in the Title column of Windows Explorer. This worked under Windows XP 32-bit
How is this fixed?
wojw

Here is the screen shot. Notice the Title column is empty.

Download 10g for Windows 2003 server 32 bit does not provide the correct pr

The following Oracle OTN link provides a misleading product. It says that the following link provides the Oracle 9i Database Release 2 Enterprise/Standard/Personal/Client Edition for Windows Server 2003 (32bit) and
what it contains is the OUI for applying the 9.2.0.3 patchset and the patchset itself. It does not contains the product.
http://www.oracle.com/technology/software/htdocs/devlic.html?http://otn.oracle.c
om/software/products/oracle9i/htdocs/win2k3soft.html

>
As far as I can tell there doesn't appear to be an Oracle10g download for
10.2.0.4 for Windows 2003 Server. It looks like you have to download 10.2.0.1
for Windows then apply the patch to bring it up to 10.2.0.4.
Am I seeing this correctly or am I missing something?
>
Indeed you are; your eyes are definitely not lying to you. 10.2.0.4 is a patchset which can only be applied to an already existing Oracle Home.
You might want to try and understand a little bit more about what the 10.2.0.4 means by accessing the links below.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#sthref14
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/dba.htm#sthref94
http://wiki.oracle.com/page/Patchset+Number+Overview
Perhaps you also ought to go through this {message:id=3251402}
Regards,
Phiri

Windows 8.1 64-bit is not being installed.

Similar Messages

Maybe you are looking for