Windows 8.1 64-bit USB 3 ports not working

I have a T430s computer model 2352CTO, running Windows 8.1, 64-bit version. Prior to upgrade from Windows 8.0 all drivers were updated. The USB 3 ports worked correctly, in particular running an external 1gb hard drive. After update to 8.1, the USB 3 ports still work, but only for about 30 seconds then the hard drive shuts down. The power light is still lit on the hard drive, but it no longer shows in windows explorer.
In device manager, I went to Universal Serial Bus Controllers -> USB Root Hub ->Properties->(under General it says "This device is working properly)->Power Management->Unchecked the box for "Allow the computer to turn off this device to save power". Unfortunately this does not seem to stop problem. Any ideas?
Solved!
Go to Solution.

Please try this:
http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-windows-8-1-my-usb-driv...
Thanks!
Houman

Similar Messages

Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

i have still facing same problem in last two week in my system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not in my system use the command netstat -a -o command in
command prompt but this is my bad luck its not woking in my machine after i have decide to change RDC listening port via registry i have change it 3389 to 3391 after restart my system, and
after again testing using same command but no any change again rdc not listening . After i have search this issue on search engine google bing and microsoft , i have found more solutions but i have try one
uninstalled two microsoft updates first is kb KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
any version computer running , i have try three and four time enable disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
stinger tools to scan my machine to remove virus but stinger is not found any thread in system. ihave already run this command in my system sfc /scannow Please Can you help me to fix this issue.

Hi,
When you try to start the Remote Destop Connection, what errors it showed out?
Could the other PCs connect this PC with the RDC?
So you have read this blog?
RDP connections might fail due to a problem with KB2621440 - MS12-020
Did you reinstalled the KB2621440?
Besides, did you follow this guide to enable the RDC connection?
Connect to another computer using Remote Desktop Connection
And also this guide?
Why can’t I connect using Remote Desktop Connection?
Please take a check with those settings again.
Best regards
Michael Shao
TechNet Community Support

Hp 15-D018TU USB SS PORT NOT WORKS

Hi, In my HP 15-d018tu Notebook PC the USB SS port not works.Can anyone look into this problem and guide me.
Thanks in Advance

Hi:
Did you install the applicable usb3 driver?
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135422_1

USB Ethernet port not working after ML install

After installing ML I cannot get the USB Ethernet port to work. Have searched for andriod file transfer agent but cannot locate it as previously mentioned.

Same Problem over here. Has anyone a good idea how to fix this problem?
After installing ML i cannot get my original Apple USB Ethernet port to work (Macbook Air 2011).

FRONT PANEL USB 3 PORTS NOT WORKING.

I have just had a new ASROCK motherboard fitted to my HP Pavilion base unit as it failed after only eighteen months & even though everything is connected correctly my USB devices are not detected when plugged in. The USB 3 ports are the original HP Pavillion ports & cable configuration & plugged into the new ASROCK board.
Specs:-
ASROCK Motherboard: H61M-DG3/USB3. http://www.asrock.com/mb/Intel/H61M-DG3USB3/?cat=Specif...
HP Pavilion 500-081ea base unit: http://support.hp.com/gb-en/product/HP-Pavilion-500-000...
I running Windows 8.1 Pro 64 bit.
Can anyone please help?

Those should be fixed with a chipset driver, which is packaged in the HP graphics driver. Did you install that yet? Don‘t do express install, but rather the custom install and check everything.

In windows 8.1 64 bit , brightness and sleepmode not working

I have the 15-g009AX notebook via flipkart . After installation of windows 8.1 64 bit brightness and sleepmode and hybernate mode not working
Please send the solution.
From.,
Madhu

Hello @vmsbobj ,
Welcome to the HP Forums!
I understand after installing Windows 8.1 you are no longer able to use the brightness, hibernate or sleep mode options.
I cannot seem to find the exact model you've listed. The drivers found here should do the trick for you though: HP 15-g030au Notebook PC Drivers. What you're looking for is the HP System Event Utility software found in the Software - Solutions section.
If you can respond with the product number for the notebook I may be able to give a better answer. For information on finding your product and model numbers click here: How Do I Find My Model Number or Product Number?
Let me know if this utility resolves the issue.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Usb & sdcard port wont work in windows 7

Hi all,
my usb & sdcard port wont work in windows 7, also i cant install drivers for coprocesor and the sm bus controller, I have a macbook pro 13" A1278,
I have tryed to install the drivers from the osx cd, but to no avail it just wont work,
Please can anyone help

the reason i ask is base system device can be a few differant things but about 90% of what i have seen it show up is the card reader. try to uninstall anything in device manager that has to do with the mic and restart the laptop. this will allow windows to try to find and install the correct drivers. also open realtek HD audio manager and make sure the mic is not muted.
-civicman4-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Post all info about your laptop and version of windows. We are working on it but still do not have the powers to read your mind.

Touchsmart TX-2 fingerprint scanner and USB ports not working

Hi everyone,
Please forgive me if this is in the wrong spot.
Just sent my laptop (Touchsmart TX-2 1015au) off for a warranty fix - told them the USB ports weren't working on Windows 7, 64 bit. It came back wiped, running on Vista 32 bit and.....with the USB ports not working.
I figured I'd try to get it working because I need my laptop for uni and can't send it back right now. So I clean installed Windows 7, 64 bit again and its still not working. Did the standard open device manager and uninstall everything under the usb tab. All that has resulted in is causing the fingerprint scanner to stop working (being told that it is not connected) and still no working USB ports.
All advice really welcome and very much appreciated!
Thanks in advance

Hi:
Should be no problem to get W7 32 bit to work on that model.
Just use all of the drivers and software from the HP Probook 450 G0 on your model except the Audio, BIOS and firmware files.
Your model uses the Intel HD graphics driver only.
The first driver you have to install is the Intel chipset installation utility and then reboot.
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?cc=us&lang=en&sp4ts.oid=5359407&ac.ad...
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level=4&Conn=3&DownT...
If for some reason, the Intel HD graphics driver from that model does not work, then use this one...
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=23713

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

Re: Front USB Ports not working on Z97-G45 motherboard

I figured out the problem. It was my Corsair keyboard, (k70 RGB) I had it plugged into 2 usb 2 ports, I moved it to a single usb 3 port and now my font usb 3 ports are working.

Quote from: Chike on Today at 06:13:44And this was ok before and only happen with Windows 10?
No I never tried it before Windows 10. I was just shutting down all the way.

My usb port not work and hot usb port aria please help me

my usb port not work and hot usb port aria please help me

Hi
Please find the link givenbelow might help you to fix your issue.
USB Device Troubleshooting
Fix Windows 7 “USB Device Not Recognized” Error
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

MSI GAMING 5 - ALL USB ports not working

hello
how are you every one
i have problem with rear usb port i can use it in safe mod and bios only but it does't work when the operition system start i try to slove the problem i updated bios i have other pc and same specification and it's work without any problem but with this mother borad rear USB ports not work also the USB ports on the case ALL USB PORTS NOT WORKING
Mouse and keyborad work in bios but if the system run don't work ! and trun off
and all usb devices
in safe mod work
rellay i don't know where is the problem !
CPU : Intel Core i5-4690K
M.B : MSI Z97 GAMING 5
RAM : G.Skill Ripjaws X 8GB DDR3 Kit
GPU : Gigabyte GeForce GTX 970 G1 GAMING
SSD:Corsair force LX 256 GB
HARD: Seagate Barracuda 1 T.B 7200 RPM
CPU COOLER : Cooler Master Hyper 212 Evo
PSU : Cooler Master GM-Series 750 watt
CASE : NZXT Phantom 410
Thank you

Quote from: Nichrome on 28-January-15, 00:18:47
Hi,
What about if you try to install drivers from your product's page?
http://uk.msi.com/support/mb/Z97-GAMING-5.html#down-driver
And when exactly it starts to fail to work? Did you try to have OS just installed, restart it and see if it works then? Are you able to determine which driver installation causes USBs to stop working?
thank you
i just remove USB3 controller driver and work
thank you all :D

USB hub does not work! Help

I was attempting to install a KVM switch for my G4 and G5 that required me attaching my keyboard and mouse to the usb port on the back of the monitor.
The USB hub does not work! Monitor cable has no bent pins, and works perfectly for video with all my Mac's, G4's, G5's. The problem is I have had this monitor awhile and never tried these ports so apple won't help.
Anyone have any suggestions why these ports don't work and if there is a fix?
Can any one recommend a KVM switch that supports ADC, and USB so I bypass this hub.
Thanks

Some USB 2.0 hardware works very well w/USB 3.0 & some don't. Suggest that you contact the sound card manufacturer & ask them. Perhaps they can recommend a work-a-round.
Another user posted about the same problem some weeks ago regarding a sound card.

USB webcam microphone not working with Starcraft 2 voice chat

=USB webcam microphone not working with Starcraft 2 voice chat?Windows 7, X-fi Fatalty Pro
I have a webcam with ?a built in microphone (Ps3 eye). ?It is connected by USB. ?The drivers are the CL-Eye drivers; a third party driver set since Sony does not directly support the eye for PC.
in the windows audio device management, the microphone appears as normal and is set as the default device. ?I can use the windows sound recorder to record me speaking just fine. ?However if I use any other applications it doesn't seem to work at all. ?I can select the device as the default recording device in Starcraft 2 as well as Teamspeak 3 but no sound is detected. ?The USB microphone does not show up as a selectable device in recording options in my Creative Control Panel. ?Disabling the default creative microphone does nothing.
I think the problem is in that windows can directly detect the microphone and so software that uses the windows audio device manager works fine, but anything that talks directly with my sound card software does not properly detect the microphone. ?Basically, I can select the device as a default device but it does not work.
Any thoughts on this or am I SOL and have to find myself a shiny new headset?

I had the same problem. You need to check the device index of your USB mic.
In my case. I'm on a Mac OSX 10.6 system. I had four devices cataloged. With the last one being the USB mic.
Then set like so in your AS code audioPub.microphoneManager.micIndex = 3;
Remember, that the indexing is 0 based.
The sound framework make the assumption that the index is 0.
Hope that helps.

Audio jack port not working

i installed windows 8.1 on my laptop HP 655 and i have high definition audio device drivers installed but i cant hear any sound from my headphone or external speakers when i plug the audio jack in its port. but the internal speakers are working well... please help

Dear gbonyo -
I understand that after installing Windows 8.1, your speakers and headphones do not work. Well, that's annoying... I will try to help.
- Before going through these steps, make sure that the speakers and headphones are connected to the correct ports. (I know this sounds silly, but sometimes it happens.)
The first and simplest thing to try is the audio playback troubleshooting tool:
1. With the headphones and speaker plugged in to the laptop, type "troubleshooting" at the Start screen to open the Search charm, and then select Troubleshooting from the search results.
2. Under Hardware and Sound, click Troubleshoot audio playback and then click Next when the Playing Audio window opens.
3. A new window opens. Select the device you would like to troubleshoot. Then click Next and follow the on-screen instructions.
4. If a recommended action displays, select Apply this fix or Skip this step to continue to search for other problems.
If the above does not resolve the problem (and/or it does not find your speakers/headphones) it could be that the laptop does not know that it has speakers/headphones attached to it.
1. From the Start screen, type "sound" to open the Search charm, and then select sound from the search results.
2. Click on the Playback tab.
3. Right-click an empty area of the Sound window.
4. Click the check boxes to select Show Disabled Devices and Show Disconnected Devices.
If the device is listed as "Currently unavailable" or "Not plugged in," disconnect it, and
then reconnect it from the port.
5. Test the device by sending a signal from the sound source (For example: Play an mp3 file).
6. Look at the bars next to the device name on the Playback tab:
If the gray bars next to the line-in audio device name change to green, the device is active and an audio signal is passing through the line-in port. The issue should now be resolved.
If the bars remain gray and inactive, the computer is not recognizing a signal. Leave the Playback tab open and proceed to the next step.
7. From the Playback tab of the sound window click the port that you want to use (there could be one or more ports).
8. If the device you want to use contains a small circle with an arrow pointing down, the device is disabled. To enable the device, right-click the device name and select Enable.
9. Click Set Default to make this device the default line-in audio device.
10. Click OK to make the changes.
Please let me know if this resolves the problem. If it doesn't, we can try a couple of other things.
Sincerely,
dhtp
DH
I work on behalf of HP.
Please click "KUDOS Thumbs Up" if I have helped you, and click "Accept as Solution" if your problem is solved. Thanks for the feedback!

Windows 8.1 64-bit USB 3 ports not working

Similar Messages

Maybe you are looking for