Windows 8.1_64 compatible PCI Serial port drivers for M58P (6209)

On the last week I upgraded my Lenovo M58p (model 6088) to Windows 8.1_64 (Enterprise) and encountered the problem in which the drivers for the following were not installed and couldn't be located ....
PCI Serial Port
In the model page there is no information on the PCI Serial port:
http://support.lenovo.com/br/pt/products/desktops-and-all-in-ones/thinkcentre-m-series-desktops/thin...
Thanks
Solved!
Go to Solution.

I found the information about the driver on another topic:
https://forums.lenovo.com/t5/Windows-8-and-8-1/ThinkCentre-
M58p-6234-BR9-Windows-8-eval-build-8250-missing-PCI/m-p/854209#M589
The first link did the trick:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS003086
c3amt02us17
Thanks.

Similar Messages

Hp dc 7800 how can i install pci serial port driver on windows 8.1

hp dc 7800 how can i install pci serial port driver on windows 8.1 please help
This question was solved.
View Solution.

Hi:
Download and install the W7 AMT driver.
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3459243&sp...

Can't find a PCI-serial port

Hello:
I am using a PCI-Serial card to control a serial-port stage, I can not find the serial port with Labview8.0. Windows can find this serial port. When I use the same Labview program in my old computer which has a serial port on board, it can be recognized. Shall I change something of the 'Visa serial' communication module?
The attached file is a Labview programmed driver for a motor-stage.
Thanks,
Attachments:
ZaberLabview8Demo.zip ‏77 KB

If Windows can't find the serial port, then LabVIEW isn't going to find it, and it's irrelevant what you've coded. You should go into the Windows Device Manager to see what it tells you about the device. Does it even show up in the list of devices? Does it have a driver loaded? If it doesn't show up in Device Manager, try plugging the card into another PCI slot. Does the card show up if you plug it into another computer? Perhaps the card is bad.

Missing PCI serial port driver on elitebook 2560p after faulty motherboard replacement

Hi,
I have the following issue, after a faulty motherboard replacement on my elitebook 2560p with Win XP, I find a question mark in the device manager list reporting that a PCI serial port driver is missing.
Browsing device properties I can read:
PCI serial port - PCI bus 0, device 22, function 3
and
PCI\VEN_8086&DEV_1C3D&SUBSYS_162B103C&REV_04\3&B1BFB68&0&B3
I've already tried locating driver without success in SP38312, SP45131, SP53918, unzipping the files and trying to locate manually the driver inside the folders with the windows driver update function.
can you help locating the correct driver?
thanks a lot in advance
This question was solved.
View Solution.

Hi:
Try this one:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
Paul

845G MAX - "PCI Serial port" coming up as new hardware

Hi,
I just installed the motherboard and did a fresh install of win2k sp3. I've installed the latest BIOS, Intel inf and everything from the windows update service but it's still not able to install the PCI serial port. Can anyone clue me into what I need to do?
Thanks,
Chris

Dear Subhash,
If your Ci is running then http://hostname:port should give you a start page, but if you login to perticular new instane with http://new host:new port and if this is returning some error then we can categorize as we have problem in new instance.
Can you please paste .out logs from your work dir for new instance.
and chek the memory settings according to following notes:
Note 696410 - Java VM settings for EP6 on J2EE 6.20
729178 - Java VM setting for applications running on J2EE Engine 6.20
634689 - Central Note for Memory Issues, SAP J2EE Engine 6.20
And specify your system configuration as well ..
Regards
Shailesh

Windows XP 64bit extended systems edition SATA Drivers for MSI-9130 K8T Master2-FAR

I'm looking for Windows XP 64bit extended systems edition SATA Drivers for MSI-9130 K8T Master2-FAR. Does anyone know where I can download it? Thanks
Processor: AMD Athlon 64 FX 51 2.2Ghz 1ML2
Motherboard/Chipset: MSI-9130 K8T Master2-FAR (VIA K8T800) dual channel DDR400
Memory: 1GB total (2x512) actually needs to specifically be Corsair CMX512RE-3200LL XMS3200R 1.1 400Mhz 2326 512MB DDR400 Register ECC
Disk: 160GB Serial ATA Seagate ST3160023AS
Video: Radeon 9800 Pro 8X AGP graphics with 128MB DDR memory

>>Posting Guide<<

Adapt QCM serial port VIs for USB QCM

I am trying to adapt Labview VIs that use a serial port and use them a QCM that uses a USB port. Does anyone know how I can do this. I have limited labview experience.
The USB QCM gives me data for the thickness and mass gains of the materials deposited but I cannot correlate those mass gains with the pressures in the reactor. I need to correlate the mass gains with the pressures so I can know the pressure profiles of the materials I deposit. The serial port VIs (for a different QCM) save the data for the mass gain and the corresponding pressure but I cannot do that with the USB QCM. That is why I want to adapt the older programs which store all the information and use it with the new QCM.
Thanks
-Sicelo

You would likely want to use VISA to communicate with this USB device. If you get the VISA alias for the device, you should be able to replace your serial code with VISA code that does very similar things (such as read and write). This link shows the kind of thing you should encounter when using LabVIEW to control a USB device.

After change Windows XP with Windows 8.1 I can't find drivers for scanning M2727 nf

after change Windows XP with Windows 8.1 I can't find drivers for scanning M2727 nf

Hi: You should be able to use most of the W7 x64 drivers and software from the HP 255 G2 on your model except the BIOS and firmware files. http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=6431940&swLangOid=8&swEnvOid=4063 Your notebook has the Realtek RTL8188EE 802.11bg/n 1x1 WiFi adapter, so that is the wireless driver you need. Additionally, you need these usb3 drivers. Install both and reboot. http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_125616_1 http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_123787_1

Aspire V5-572G - No drivers for Windows 10 available. Can only find drivers for Windows 8.1

Hi, I have upgraded my PC and have my touchpad is not working.Have search for new drivers for Windows 10, but there are no drivers for Windows 10 available. Can only find drivers for Windows 8.1 Please advice how I can solve my problem...

There are Windows 10 drivers available:
AudioRealtekAudio Driver6.0.1.7553444.7 MB2015/07/28DownloadBluetoothAtherosBluetooth Driver (NFA222)10.0.1.059.2 MB2015/07/28DownloadBluetoothBroadcomBluetooth Driver12.0.1.65328.2 MB2015/07/28DownloadCardReaderRealtekCard Reader Driver10.0.10125.2127712.8 MB2015/07/27DownloadChipsetIntelChipset Driver10.1.1.72.7 MB2015/07/27DownloadIRSTIntelIRST (Intel® Rapid Start Technology) Driver14.5.0.108111.4 MB2015/07/27DownloadLanRealtekLAN Driver10.1.505.201512.5 MB2015/07/27DownloadMgmtEngineIntelME (Management Engine)Driver11.0.0.115360.7 MB2015/07/27DownloadTouchPadALPSTouchpad Driver8.100.2020.21260.7 MB2015/07/28DownloadTouchPadELANTECHTouchpad Driver15.6.0.388.8 MB2015/07/27DownloadTouchPadSynapticsTouchpad Driver19.0.9.4148.4 MB2015/07/28DownloadVGANVIDIAVGA Driver353.24649.5 MB2015/07/28DownloadWireless LANAtherosWireless LAN Driver (NFA222)10.0.0.31859.2 MB2015/07/28DownloadWireless LANBroadcomWireless LAN Driver7.35.267.044.5 MB2015/07/29Download

PCI Serial Port error

the computer says it is disabled, and when i try to reinstall or fix the problem through the options, nothing works. what do i do?

Is this WIndows 7? There is something about the Intel security drivers and WIndows 7 that crates problem virtual serial ports. I just remember seeing something about it.
T61p, T400
formerly x23, x40

JNI Method to find the Windows app that owns a serial port?

Im trying to write a native method that will tell me the app. name or PID of the Windows application that owns a com port.
Any Ideas?

Just a heads up. Based on what I found searching
through MSDN, apparently MS does not store any
application/device information w/ the registered COM
port thus making it impossible to identify the
application that is currently using a specified COM
port. They only thing that can be determined is
whether a COM port is being used or not.Basically there is a driver and something attaches to it.
It might be possible to add a proxy driver that would collect the information somewhere when something started using the driver.

Serial Port Header for K9A2VM-FD

Does anybody know where I can get a serial port header/cable that works with the K9A2VM-FD? I tried using a generic serial port header, but the header block on the motherboard appears to be smaller than normal. Thanks.

You mean the blue thing? I think that is a so called D-SUB connection. You use that for a connection to the monitor.
Some call it VGA or analogue VGA. http://www.msi.com/index.php?func=proddesc&maincat_no=1&cat2_no=171&prod_no=1671#
From what I can see there is no serial. If you need a serial, you buy an adaptor from USB-to->Serial, or a little PCI card to add a serial port. Very cheap, I'm sure.

My Windows 7 computer can't find the drivers for my iPhone 3GS. Can I download the driver and manually install it myself?

My desktop computer (a PC running Windows 7 ultimate) is not able to find drivers for my iPhone 3GS when plugged in. My laptop does, so I'm wondering if I can download a driver for it and install it manually on my desktop? (Please provide link) Thank you.

This sort of helped in that the iPhone was recognized briefly. As I was configuring things related to the iPhone itunes became unresponsive so I killd the process. Then when I restarted it, it went back to the original issue.
Even when it did work, it was competing with another driver (mtp?) When it did work the mtp driver failed and the apple one succeeded. Now that it stopped working, the Apple driver is not mentioned and the mtp driver fails.
I guess I'll have to delete and install itunes a few more times to figure this out. Thanks for your response.

Windows 8/8.1 32/64 bit Drivers for Satellite P100/P105 Users

I made an original post with my now ancient Satellite P105-S9722 back in 2009 & 2011 for Windows 7 64-bit drivers. Windows 7 Drivers for P100/105 Systems
Now that I have newer systems, I have experimented loading Windows 8 & 8.1 in my P105-S 9722 system. Wanted to share some observations and any issues I came across.
I have listed here some basic drivers you can use for your P100/P105 systems for Windows 8 and 8.1 and 32/64-bit to work. Many of these listed are from other users, but there may be some additional drivers many may not know about. I can't guarantee that all of these will make your system work 100%, but hopefully this will make your upgrade just a little quicker & easier.
Before using these driver, I recommend you do a fresh install of Windows 8 or 8.1 32 or 64-bit regardless if you are using XP, Vista or 7 32 or 64-bit systems.
Now I did use an installation DVD instead of a flash drive since you may need to add additional features to make certain programs work.
After installing the Operating System (OS), immediately go to Programs and Features in Control Panel . Make sure to turn on the .NET Framework 3.5 (includes .NET 2.0 and 3.0). You will need this to install some of the Toshiba utilities.
Many of the native drivers for Windows 8 & 8.1 will automatically be installed. The wifi driver should work. I am using a Sparklan GN-WS30N 802.11n using Ralink RT2860 chipset that works in 8 & 8.1.
SOUND CARD: The biggest issue of Windows 8 & 8.1 32/64-bit is that there is no sound. The old Audio 4.8.0.0 driver is the only driver that still works in Windows 8 & 8.1. There are much newer versions, but for some reason, the old driver works the best.
1) Download the driver.
2) right click the file to extract it to a folder of the same name (do not double-click as the automatic installation will fail)
3) double-click on folder Audio4.8.0.0, then double-click again on subfolder Audio4.8.0.0 if present
4) double-click on folder BD1-BH1
5) double-click on folder VXP64
6) recommend to double-click on file BD16HAa.inf to check if your sound Hardware ID is listed under [Conexant.NTAMD64], should be HDAUDIO\FUNC_01&VEN_14F1&DEV_5047&SUBSYS_1179FF31
7) close BD16HAa.inf file if opened in step 6, then simply double-click Setup64.exe
8) restart system (although audio may work right away, always a good idea)
See Audio 4.8.8.0.zip Download on Bottom of post
SYNAPTIC TOUCHPAD: If your P100/P105 has a dual Synaptic touchpad like mine, the driver does work in WIndows 8/8.1, BUT you still need the utility to make it work.
Download: Toshiba Touchpad
Here's the thing with the Toshiba file, when you save it or run it, it unzips the folder into the TEMP folder. When you go to run it, the main setup will work. In case the autorun does not work, here's what you need to do:
1) Change you folder selection so you can show hidden folders & files
2) After unzipping the file, open C:\Users\"YOURNAME"\AppData\Local\Temp\Synantec Touchpad.temp
3) Click on "Setup" icon to run the file. (This file worked just fine on my P105-S9722 machine)
PCMCIA/Express Card/SD (TI) CARD READER - This driver will allow the PCMCIA, Express Card & SD Readers work normally on Windows 8/8.1.
There is issue with the Texas Instruments PCIxx12 Integrated FlashMedia Controller. I did find a driver the does work:
Download: Texas Instruments PCIxx12 Integrated Flashmedia Controller
Nvidia Video Card - After loading the OS, the maximum resolution on the native drivers is only 1024 X 768. In order to get the maximum resolution of 1440 X 900, a NVidia driver is required.
Download: Nvidia GeForce Release 179
Once this is loaded, use Windows Updates to download the most recent drivers. Windows 8.1 definitely has a newer driver. It is a good idea to download the NVidia GeForce Experience so that newer drivers can be installed: Nvidia GeForce Experience
Fingerprint Reader (Biometrics Devices) - The Upek driver only goes up to Windows 7, but Windows 8/8.1 does have a native driver through AuthenTec that does work. The Toshiba fingerprint utility will be needed in order to user the fingerprint reader. The Toshiba Utility can be downloaded here:
Upek Fingerprint Driver 5.8.0.4024
The utility should work with the native driver.
That's pretty much it for the basic drivers. I did not include LAN or Wireless Drivers.
Finally make sure the most recent Bios are installed v4.70: http://cdgenp01.csd.toshiba.com/content/support/downloads/sp100v470.exe
There are attachments and links, but let me know if anyone is not able to download or use any of these links posted.
Current Issues & Observations: After I shut the computer down, when I open the screen, the computer automatically turn on. I haven't figured that out yet, but I'm sure I'll post a fix in the near future. The computer definitely boots much faster compared to Windows 7 and I've upgraded the older spinner drive with a Sata III SSD Drive. Even with only 4GB of memory and the first generation Duo Core processor, P105-S9722 is still running well.
I may do another post if I decide to try out WIndows 10, but for now, it's nice to know that even though the old P100/P105 systems do not support anything over Windows Vista, we can use the contempory software on a system almost 10 years old.
Good luck.
Attachments:
Audio4.8.0.0.zip ‏9134 KB

That should work as well for all the models in part-number family PSCJEU. At least these, probably more..
    Satellite C55-A5104 (PSCJEU-00K00R)
    Satellite C55-A5105 (PSCJEU-00K018)
    Satellite C55-A5180 (PSCJEU-00F001)
    Satellite C55-A5190 (PSCJEU-00L001)
    Satellite C55-A5140 (PSCJEU-00K001)
    Satellite C55-A5137 (PSCJEU-036012)
    Satellite C55T-A5123 (PSCJEU-01G00Q)
-Jerry

I have a macbook pro 1175 its a 2006 model which boot camp will work i tried 4.03 but it says this boot camp is not for this machine thats the oldest one i found here please help i have windows 7 32 bit installed but need drivers for the sound

i have a 2006 mackbook pro running windows 7 32 bit i need drivers for the sound and the earliest bootcamp on here is 4.03 my machine says its not for this system please help which version of boot camp can i use

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

Windows 8.1_64 compatible PCI Serial port drivers for M58P (6209)

Similar Messages

Maybe you are looking for