WIndows 8.1 64bit, Windows Installers stalls with any install, updates or third party programs.

WIndows 8.1 64bit, Windows Installers stalls with any install, updates or third party programs. Third party program installations work if I restart in safe mode. Updates don't as they cannot be installed in safe mode and require normal mode.
Been happening for months now. Some installations after a long time finally proceed, others dont.
Already trying uninstalling antivirus (Bitdefender) with no result.
Thanks

Hi，
Could you check this issue under clean boot?
Also try this fix tool it repair corrupted registry keys.
https://support.microsoft.com/en-us/mats/program_install_and_uninstall
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Executing system command (third party program) from extend script without showing console on windows

I am using following code on mac:
app.system("/path/to/external/executable &");
It runs external program in background (without showing console/terminal).
On windows I tried many things like:
app.system('start "" "/path/to/external/executable"');
app.system('start "" /B "/path/to/external/executable"');
And I was also trying to solve it using visual basic.
Unfortunately everytime I use app.system(...) then windows console is showed on the screen for half of the second, then it disappears and progrm runs in background. Is it possible to avoid showing console window? Maybe there is another way of executing third party program?

You can try to save a vbscript :
Dim objShell
Set objShell = WScript.CreateObject( "WScript.Shell" )
objShell.Run("""\path\to\external\executable"""), 0, True
Set objShell = Nothing
than just execute it from javascript:
var vbFile = new File("path to your vbscript file")
vb.execute();

HT4623 My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue

My computer is not taking the new update from itunes. It states that i do not have the requirements to finish the Install and that it was Installed incorrectly. I have never had any issue with any previous update regarding iTunes. What is the issue?

Hi there Double2D,
You may find the troubleshooting steps in the article below helpful.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
-Griff W.

Windows 8.1 64bit. Webcam works with "Camera" app ...

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas???
OS: Windows 8.1 64bit
Memory: 32GB
WebCam: Microsoft VX-7000.
As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter).
Already attempted:
1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.
2) Close (from taskmgr) anything that looks like it might use Webcam.
3) Run Skype for Desktop in Windows 7 and 8 compatibility modes
None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam".
I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it
Thanks,
- Matt Symes

I have 6 USB3.0/2.0 ports on the rear panel of the motherboard and the camera is connected to one of these.
I also have 2 USB 2.0/1.1 ports on the front panel of the PC connected to the motherboard (it's an old PC case!) I've tried using these with the webcam and there is no difference (i.e. works in "Camera" app - not in Skype)
TI've generated and attached the log file as requested.
Thanks for your assistance in this issue.
Attachments:
debug-20140217-1602#1.zip ‏922 KB

When going to certain sites a window will pop up saying that " Information may be seen by a third party" This happens a lot even with sites that i know are secure. What is this pop up and how "insecure is the site i am putting information on.

The pop up says Security warning. You have an encrypted page that contains unencrypted information and may easily read by a third party.
What is this pop up and how secure is the site i am on when this pops up.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

How do I integrate Configurator and iPad Electronic Flight Bags with applications that utilize a third-party license and subscription that is outside of iTunes?

I am the EFB (Electronic Flight Bag) Manager for a small aviation company that are using 10 iPad with Retina Display as approved in-cockpit EFBs. Our plan is to configure and manage these iPad EFBs with Apple Configurator 1.3. We also use 2 third-party applications for charts, aviation weather, and other aviation functions that depend on a seperate license and subscription with the vendor outside of iTunes. What I am finding through my new education in Configurator is that there does not seem to be a way to maintain the subscription status with those two applications. Is there a way to isolate those two programs from Configurator control? Better yet, is there a way to integrate them with Configurator without losing the subscription status and loss of huge amounts of data that are on a regular, FAA regulatory update schedule? Configurator is awesome at managing iTunes managed applications and is perfect for our company. I need to figure out how to make Configurator work with a subscription-based application. Please help!

Here is what is surmise reading ForeFlight web site.
There is the app and the data.
You manage the app through configurator or some other MDM. The acquiring and paying for the data is independ of the configurator. You can buy the data through the app or online. You may want to buy online. This way you can do the buying independent of the ipad. Once you have purchased, the app will download the data. You may have to tell it to procedure with download panel.
Some people use configurator to install mdm app then do the rest of the configuration from MDM. This allows wifi updates of configuration.
You end up with managing apps from MDM. You manage with your data from from the online account. You enter appropriate password on each ipad to gain access to the data. App will download your data. My need to tell it what to download in app.
How do I buy a subscription?
Purchasing a subscription is fast and easy! You can purchase a subscription online or inside the app using your iTunes account.
To purchase a subscription inside the app, launch ForeFlight Mobile and then tap the 'Account' icon. You'll see a list of available plans to purchase in the 'Subscription Plans' table. Tap the one you want to buy. Follow the instructions for entering your email address and iTunes password. When the purchase is complete, you'll receive confirmation inside the app and immediately be able to continue using ForeFlight Mobile.
To purchase a subscription online, visit our secure online ordering page. You'll be asked to choose a plan and enter your credit card information. After your purchase is complete, you'll receive an email with a password to sign into the app on your phone or iPad.
http://www.foreflight.com/support/subscription#66
How do I update charts, plates, and the airport database?
ForeFlight Mobile has a download manager designed to make selecting, downloading, and updating your data easy- whether you like to store a little or a lot. Tap the Downloads icon from within the ForeFlight Mobile app. The Download Manager allows you to select the types of items you want to download and store on your device. ForeFlight Mobile will contact our servers and display the available updates. If you download updates that are not yet effective (future data sets) they will automatically be used by the software when they become effective. The download manager lets you pause a download and resume it later.
http://www.foreflight.com/ipad/faqs/#11

Receiving installation failed after attempting to install Photoshop,Illustrator, InDesign (and seems anything with CC). Error is Third party payload installer vcredist_x86.exe failed with exit code: -2147024546 and Failed to install Microsoft Visual C

Initial install. Logged into Cloud then initiated download. Programs appear to be installed but received those errors. Is this solely affiliated with third party licensing? Is this something that I need to be concerned about?

Hi,
It seems Microsoft Visual C++ 2010 Redistributable Package is corrupt,
Please download it from:
http://www.microsoft.com/en-in/downlo...
Then try re-installing Ps after restarting your system.
Regards,
Ashutosh

I need help with some technical YouTube Settings, third party tools page

How can I add ios mobile Safari, back to my google + third-party tools page? I updated my ipad 2 to ios7 and could no longer upload videos to youtube for my blog. YouTube had been saying unrecognized file type because it's not longer compatible with ios mobile photos app.
I went into settings via the google/youtube help files and removed some old stuff from the third party apps, like blogger-an inactive blog and obviously deleted the ios moblie too that was right underneath blogger. tried jumping through their hoops, add a phone number, verify your account, lengthen your video time, add 2 step verification (which was horrible and I went back in and removed it), add a password for ipad, etc.
They (youtube/google??) have been working on stuff because there is all kinds of new things the second day I tried to figure this out via their help/redirect links. ios mobile was there before and now it's gone, even though I did not choose/select it. But I have noticed that the ipad screen is much more sensitive than it was before the ios7 update. I don't even have to touch the screen for some things, it accepts and goes on it's own while my finger is hovering over the screen.
ipad2
ios7.0.2
Safari
YouTube
Google+

The Title of my post, should really be....I have ipad2 with ios7.0.3 and Safari, I can't upload videos to YouTube because of Google? or ios7?
It's now November 1st. LOL 53 folks have read my problem and it only gets better. I pleaded with Google/YouTube via Feedback form (because they are one and the same now) to please add ios mobile back to Google 3rd party apps and after checking every single day, someone finally added it back for me. Yay! Then I asked if I needed to "revoke" Google+ in the 3rd party apps because some of the help files suggested Google+ is attached to your YouTube channel and might affect uploading of videos? For the life of me, I could not figure out how to get it off my YouTube channel. And the help files didn't take me to a place to change it. Upon checking 3rd party apps, I could no longer find the page they were on, and the Google+ app icon now goes no where.
Hey, but there are new menus with all kinds of statistics now about your account, like how many subscribers you have, what the average number of minutes people watch your videos,etc. Hmm... so I tried uploading a video and it worked. I got the message that ios7.0.3 with bug fixes was available a few days ago and updated to that. I'm back to, no longer upload videos, yesterday it was still freezing on the upload screen, where you add the title of your video and all of the specs, it appears to be half uploaded with a solid blue bar half way and goes no where. I have to close the app after an hour or more. I have rebooted a couple of times every day. Today it says, we could not upload your video, we did not recognize the format of this file. And when I go to YouTube and can see all of my videos, my subscriptions, I can not remove the videos that tried to upload, they are blank gray squares. A few days ago I could edit them out. I guess they are still working on it. These are the same self recorded videos, that I have been uploading for a year, same ipad. I have sent feedback to Google/YouTube once again.
I'm completely at their mercy. I have yahoo mail, so I can't send my videos via email, even though my channel has a special email address to send videos to for upload. Yahoo will not send a video more than a minute or so. I created an AT&T email address today, and it's the same there, will not send a 15 minute video. The upload link on YouTube no longer works, there on the same page with your special email address to mail your videos in, even though there is no email that supports a 15 minute video. My husband suggested video compressing program. I have not tried to upload from a PC, I do have icloud, so that may be my next route. Other forums say they/Google/YouTube are fully aware of it and are working on it. Still 30+ days in...
It's a shame these companies can't work together, it's a shame that there is no answer, because we all have these devices we spent hundreds of dollars on and want them to work. I have been searching the web for 30+ days and no one knows the answer. Hard to believe I'm the only person having this ipad issue.

Cluster aware updating hotfix plugin succeeded with 0 installed updates

we try to apply Hot fixes to Hyper-V 2012 Nodes using CAU
we prepared every thing for using CAU Microsoft Hot fixes plugin
then generate update preview list successfully
then Apply updates for cluster the log show succeeded operation
but when you Run report for applied updates it shows 0 installed updates
can anyone help why 0 updates installed
thanks
Ahmed

All recommendation applied and CAU working fine for WindowsUpdatePlugin
the problem only with MicrosoftHotfixesplugin
thanks
Ahmed

HT201210 I tried updating my iphone and now it says I have to restore my phone. I've never had to do this with any other updates, I'm confused?

I tried updating my iphone and now it says I have to restore my phone. I've never had this problem with the previous updates, I'm confused?

Same with me. The Upgrade hung up and froze the phone. Do the restore and then back it up when you get into iTunes from a previous save. It takes the better part of an hour our of your day depending how many apps and songs you have to get everything back together. It is a royal pain but I didn't lose anything.
Download a youtube app. It's not in iOS6.

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

CF10 on Windows server 2008 (64bit): 32-bit CF cannot be installed, but 64-bit can.

Hi, I have exhaused my research and ways of fixing this issue.
I have a Windows Server 2008 (64-bit).
I am able to install 64-bit CF10 on it and CF websites run just fine.
On the same machine, I have a ASP website that must be in run in 32-bit and within this website there are some ColdFusion pages. So I have to install CF10 32 bit. So I uninstalled CF10 64bit.
When installing CF10 32 bit, I always got error message:
Cannot configure IIS connector. Enable the required option ASP.NET, ISAPI Extensions and ISAPI Filter in IIS under Windows Features and try again.
I did lot of online research and found RELATED posts, but none of them worked for me. Basically, in my case I have the IIS following installed
ISAPI Extensions
ISAPI Filter
ASP.NET
CGI
but I alway got the above error message. Cannot think of other reasons.
Any help is really appreciated!!! I have been working on this thing for the past three working days.
Regards.

Hi,
I saw your post which is similar to the problem I'm trying to solve. I'm not sure if I need to post a new topic, but I thought just add it to your post.
I installed CF10-64bit on Windows 2008 server (64 bit). When I opened the CF admin, it gave me an error - HTTP Error 500.0 - Internal Server Error. The page cannot be displayed because an internal server error has occurred. Module: IsapiModule, Handler: cfmHandler, Error Code: 0x800700c1. After searching for solution in the internet, I finally made it work after changing the DefaultAppPool which is used by the CFIDE in the advance settings, the "Enable 32-bit Applications" to False.
Now, my problem is I have an ASP application which requires that the application pool advance settings must be set to True for "Enable 32-bit Applications". I created another application pool for this application. It woks fine. However, this ASP application calls some CF pages and I'm having a problem because the CF10 is set to use a different application pool with diferent setting for "Enable 32-bit Applications".
In order for my application to work, it seems that I need to install the CF10 32 bit version. Am I right? Or is there a work around for my issue?
Thanks in advance for any help.
I'm going to create a new post for this.
Message was edited by: tibay

Installing windows 7 on HP Notebook - 15-g206ax with pre installed win 8 error

while im able to tweet the bios settings for legace enabled and secure boot disabled, i was able to boot into my pendrive for windows 7 instalation. but at the time of detecting hard drive it is not showing me any partition for installation

Hi @vinzshetty ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 15-g206ax Notebook and not able to restore the Notebook to factory defaults.
Here is a link to the HP Recovery manager.
If you removed the partitions or formatted the Hard Drive, then the old recovery is gone. No way to get it back as you have written over it.
Did you create disks with your Notebook?
You could install with the disks you created.
Hope this helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Windows 7 Ultimate 64bit Windows Update isn't restarting properly.

This problem started a few days ago when windows started to nag me about updates like it does normally. So, as usual, I hit postpone for 4 hours a few times and then restarted.
When I restarted the computer it restarted as usual but didn't display the traditional "Configuring Windows Updates..."and when it started back up again lo and behold... it was still naging me and after restarting about 5 times it still won't work
and is really growing on me because I want to install stuff like VB and Windows Live Essentials and I can't do that.
Does anyone know what on earth is happening?

Hi,
As I know, if the Windows update installation itself is frozen, you might not see a "Preparing to configure Windows", "Configuring Windows updates", or see the similar message for a very long time.
I think the updates are not fully installed. Most often, this type of problems are due to a software conflict or a preexisting issue that simply wasn't brought to light until the Windows updates started installing. Much more rarely they're caused by a mistake
on Microsoft's part regarding the update itself.
Since you can't access Windows normally, try doing a system restore in system recovery environment. During the System Restore, be sure to choose the restore point created by Windows just prior to the update installation.
For your reference: Startup Repair
http://windows.microsoft.com/en-IN/windows7/products/features/startup-repair
While a System Restore is a more direct way of undoing changes, in this case a Windows update, a Startup Repair could be helpful if a System Restore isn't successful for some reason.
Also, test your computer's memory. It's possible that failing RAM could be causing the patch installations to freeze. Luckily memory is really easy to test.
Update BIOS. An outdated BIOS isn't a common cause for this problem but it's possible.
If one or more of the updates Windows is trying to install is involved with how Windows works with your motherboard or other built-in hardware, a BIOS update could solve the issue.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Keep getting an access denied window when trying to print to PDF with Adobe Acrobat X with any prgram/internet except for adobe programs

I am trying to print to PDF from Word, Revit, Firefox and all have given me a Access Denied window popup and would cancel the print. I have Adobe Acrobat X and Creative Design Suite 6.

So you are trying to print to the Adobe PDF printer? What is the full statement of the error (typically it indicates a folder or such does not allow access)? If you open Distiller, are there settings files available that you can view?
In the print menu, select print to file. Then open this file in Distiller. What happens with these two steps and do you get a PDF after the second step?

WIndows 8.1 64bit, Windows Installers stalls with any install, updates or third party programs.

Similar Messages

Maybe you are looking for