Windows 8.1 ADK Error with CopyPE for the ARM architecture

Hi folks,
I am following the command line page for COPYPE ( https://technet.microsoft.com/en-us/library/hh825071.aspx )
If I read this correctly, I should use the following command :
copype arm C:\winpe_arm
The Copype.cmd file has nothing in it that accounts for ARM.
Furthermore, the Windows Preinstallation Environment Folder only has subfolders for amd64 and x86.
Where exactly is the ARM support ?
Thanks

Hi,
Based on my test, this phenomenon should be caused by lack of ARM directory in Windows Preinstallation Environment directory.
Roger Lu
TechNet Community Support

Similar Messages

TS3212 I'm runing IE9 & I'm unable to download iTunes. I receive this error each time: There is a problem with this windows installer package. A program required for the program to complete could not be found. Contact your support personnel or package

I'm running IE 9 & windows 7. I'm unable to download iTunes. I receive this error each time: There is a problem with this windows installer package. A program required for the program to complete could not be found. Contact your support personnel or package vendor.

There is a problem with this windows installer package. A program required for the program to complete could not be found. Contact your support personnel or package vendor.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

I just purchased the Mac Mini Server with the intention of replacing Lion Server with Lion for the first hard drive while installing Windows 7 thru Bootcamp on the second hard drive. Is it possible for me to do this? Thanks.

I would use Parallels or VMWare and use the second drive to hold the virtual machine. That way the VM only uses the space that it needs and you can still use the remainder of the drive for other things, not to mention that you would not need to reboot to run windows.
Also Time Machine does not back up a boot camp partition.

When accessing the any tasks from Fusion Applications homepage, "An error was received for the task Manage Worker Goal Setting Lookups. This task is identified with the code HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS that invokes program /WEB-INF/oracle/apps/

We have installed HCM and CRM modules on Fusion Application 11.1.7 version.
This is 2 node architecture ie IDM components installed in one node and Fusion components installed in another node.
We are able to start the IDM components and Fusion components successfully, but when users are trying to access any task from Fusion application home page, they are getting the below error
A portlet consumer error was received for the task Manage Worker Goal Setting Lookups. Report the error details to the following owning product Goal Management.
An error was received for the task Manage Worker Goal Setting Lookups. This task is identified with the code HRG_MANAGE_WORKER_GOAL_SETTING_LOOKUPS that invokes program /WEB-INF/oracle/apps/fnd/applcore/lookups/publicUi/flow/ManageCommonLookupsTF.xml#ManageCommonLookupsTF of module code fndSetup. Review the consumer and producer logs for more details on this error.

This may be related to the other issue regarding "FUSION_APPS_WSM_APPID-KEY" as the logs contains exceptions like:
oracle.wsm.policymanager.PolicyManagerException: WSM-02081 : Failed to login to perform requested action.
Please refer to document Fusion Application Service Account Password Expiration Causes Portlet Producer Errors (1486388.1) for steps on how to verify and set the password. There is also exception:
javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User FUSION_APPS_PROV_PATCH_APPID denied
This is also likely caused by an expired password, please see Fusion Apps Servers Are Not Starting Up - Password Policy Error :9000: GSL_PWDEXPIRED_EXCP :Your Password has expired (1629927.1).
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

Line 1 Error - Value 120 for the flexfield segment Company does not exist

{color:#0000ff}Receiving the following error message in the "Submit Expense Report - Expense Allocation" page:
"Error : Line 1 Error - Value 120 for the flexfield segment Company does not exist in the value set XX_GL_COMPANY"
This error message is shown when the user is entering the expense report in R12 Oracle Internet Expenses responsibility. After the user has finished entering the expense lines and after the user has reviewed the default expense allocation values in the expense allocation page, upon clicking on the next button , this error message is shown.
Has anybody experienced this issue?
We have opened a Service Request with Oracle but so far there is no resolution. This issue occurs intermittently. It is NOT consistent. We have advised the user base with the following workarounds to over this bug:
1. The system administrator shall clear the cache using Functional Administrator responsonsibility
OR
2. Advise the application user to sign-off from Oracle Applications and allow 5 minutes before they sign-in again.
Any help or advise in the matter is appreciated.
Thank you.
{color}

Check these things
1. you have enable PerPeriodOfService DFF to this set.
2. you are setting Context Variable like (AttributeCategory) with requried value.
Thanks

Burn failed: there was an error producing data for the burn

Getting the following message after trying to bounce a project to CD:
Burn Fail: There was an error producing data for the burn.
Using Logic Pro 9. Burn has worked with all projects up til now. Not sure what is different about this one. Still works with old projects. ANy ideas? Thanks.

Thanks very much for responding John, Minimum was to the CD. I have an Internal Superdrive. it does dvd and cd-rs. At this time, since my original post, I have burned four smallish rolls like 200 photos at 200+ MB's with success. And then I can try less say 100 photos @ 110MB and I get the error, and coaster that is unreadable. I have a partition area on another internal hard drive that I may try to transfer to so I can get these off my computer and maybe reinstall iPhoto. I will try to pop them into a folder and copy with Toast , which i use at times for other projects. I just like the idea of keeping all the rolls in order and not losing any of the data that is part of the originals. Any other ideas would be appreciated. The photos are sort of important.

There was an error opening database for the library....

my latpop had a kernel panic wihile i was using aperture to impor pictures "that yes i have deleated off the memory card," shut down and restarted. upon restarting i was presented with this error...

there was an error opening database for the library....
what is ....? Is the path to your main Aperture library printed there, or is Aperture trying to open a different location? If it is a different location, launch Aperture on your correct library, by double clicking the library.
If it is indeed trying to open the correct library package, try if repairing and rebuilding the library with the "first aid tools" will help, see this manual page on how to do this:
Aperture 3 User Manual: Repairing and Rebuilding Your Aperture Library
If the problem persists, when trying to repair, check if there is a crash report and post the first 60 lines.
Regards
Léonie

Why does a box appear under the pointer with words for the last tab clicked on?

When I am searching for something I get to a site and the pointer can be anywhere and then a small box appears under the pointer with words for the last tab clicked on. If I move the pointer the box disappears and then reappears at the new location. How can I stop that from happening??

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

I have six memory cards and my computer will no longer download the pictures from them into my iphotos. Says error with one of the pics. Has anyone had trouble lie this and what do I do?

I have six memory cards that my computer will not download. It says there is an error with one of the photos. Has anyone had this problem and what do I do to fix it? It used to download

What version of iPhoto?
Does this message come on all six cards?
Are these Raw or Jpegs? If Raw, what camera?
Can you access the images on the cards with Image Capture (in your Applications folder?)

The updated iPhoto program is cumbersome. I am trying to create a Christmas card and can't figure out how to get the fold of the card on the left and not on the top of the card. I had no trouble with this for the past two years. Can someone help?

The updated iPhoto program is cumbersome. I am trying to create a Christmas card and can't figure out how to get the fold of the card on the left and not on the top of the card. I had no trouble with this for the past two years. Can someone help?

Click on the Layout button lower right and choose a Vertical lyout from the dropdown

ACR 8.7 has been released with support for the Nkon D750. Why no Lightroom support yet?

ACR 8.7 has been released with support for the Nkon D750. Why no Lightroom support yet? Am I wrong or was support for the D810 available far more quickly?

ACR 8.7 has not yet been released. The ACR 8.7RC has been released. It is a Release Candidate - and as such, is not a final version. I wouldn't be concerned about a lack of Lightroom support until a final version is released.
Adobe Photoshop Camera Raw 8.7 Release Candidate | digital camera raw file support - Adobe Labs

Trying to download the trial version of acrobat pro dc.The installer's says downloading but it's stuck with 3% for the last 30 minutes. What to do?

trying to download the trial version of acrobat pro dc.The installer's says downloading but it's stuck with 3% for the last 30 minutes. What to do?

Try downloading from below link :
https://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Click on Acrobat pro DC option and then click on the option : File 1 of 1 (544 MB)

I synced my 3G with itunes for the first time and lost all contacts and information on phone, help?

I synced my 3G iphone with itunes for the first time, and lost everything on my phone. how do i get it back?

You don't.
You synced your iPhone with iTunes for the first time after how long?
And this didn't happen by syncing only. This means you transferred the backup for another iPhone or you restored the iPhone with iTunes. It is not possible for everything to be lost by syncing alone. All iTunes content on your iPhone can be lost but not any photos in the Camera Roll and the same for contacts unless you synced contacts with an empty address book application on your computer.

I synced my phone with iCloud for the first time and it put ALL of my husband's contacts on my phone. How to I take contacts off my iphone and reinstall only mine?

I have archived my contacts on my computer and can reinstall only those, but I can't figure out how to wipe all of his contacts off my iphone.

You don't.
You synced your iPhone with iTunes for the first time after how long?
And this didn't happen by syncing only. This means you transferred the backup for another iPhone or you restored the iPhone with iTunes. It is not possible for everything to be lost by syncing alone. All iTunes content on your iPhone can be lost but not any photos in the Camera Roll and the same for contacts unless you synced contacts with an empty address book application on your computer.

Windows 8.1 ADK Error with CopyPE for the ARM architecture

Similar Messages

Maybe you are looking for