WINDOWS 8.1 ALARM CLOCK DOES NOT HAVE SOUND

WINDOWS 8.1 ALARM CLOCK/TIMER DOES NOT HAVE SOUND

Hi:
Works fine for me.
The machine need to be ON for the alarm to be heard & sound/speakers needs to On & Volume turned up to audible level.
Laptop can be in sleep mode but not powered off.
Try right clicking on the speaker icon. This should open a window that is titled "Sound". When you select the playback tab -> it will show icons of the audio devices you have connected to your computer.
You will need to select your stereo speaker device and then click the button "Set Default". This should enable your stereo speakers to play the sound.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Similar Messages

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

My iPad does not have sound when on the Internet, including YouTube, but does have sound with iTunes and other apps. How can I correct this?

If you are sure that you have sound in other apps - and if you can still hear keyboard clicks and get notifications, then system sounds are not muted. Try this and see if it works.
Close all apps completely and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

TS3274 My IPad does not have sound in the apps.

My IPad 2 does not have sound for the apps. I have checked everything . What should I do ?

There is a sound button located on the side near the on/off switch.

TS3789 2nd Generation Box. About 1 in 4 movies I download does not have sound. The rest seem to work perfectly.

About 1 in 4 movies I download does not have sound. The rest seem to work perfectly. Apple TV box plugged directly into a Pioneer Elite Receiver via HDMI cable. Is this a known issue? Is there a fix?

@michelle929 don't feel so bad, i too which i never would have upgrade to ff4, OMG, so piss., worse is they deleted the old version from my computer, how dare them..lol... but most of the thing i use now don't wanna work.. i want my 3.6.15 well i think that was the last one i had.. piss piss,,and Michelle your not whining , just stating the fact's.. give me back the old version Mozilla... can't even find it on here,, any one knows where i can find it... if not gonna have to go to a server an get it,,
thanks Lotta firefox. great job, not tell us first hand what won't work....:(

?after a 4 week absence from I Mac 10.7.4 it does not have sound anymore, does not recognize my voice nor can it read any stick. what can I do?

after a 4 week absence from I Mac 10.7.4 it does not have sound anymore, does not recognize my voice nor can it read any stick. what can I do?

Mac computers: Progress bar appears after waking from sleep
slow wake from sleep OS x 10.9.4

Why the iphone 4 does not have sound when I watching the recorded video?

why the iphone 4 does not have sound when I watching the recorded video?

Have you turned up the volume?
Try the buttons, or the bottom audio slider.
Does your phone normally play audio?
And have you tried to record and audio note to check if your microphone is not faulty.

I am not able to install itunes in my windows XP computer because it does not have service pack 3. what can I do?

Dear friends,
I want to transfer files between my windows XP computer and my Ipad4. I am not able to install itunes on my computer because it does not have service pack 3. What can be done? Please help?

Have you tried installing Service Pack 3 ? You should be able to try installing it via Windows Update in the windows start menu

N82, sys ver 20.0.062: Alarm clock does not work o...

Anyone had this problem? Alarm just does not come up on "some" days .. Not sure why, but I regularly (once a week) notice that it just does not want to work sometimes, and restarting the system does not help.
Normally, when you set alarm, message pops up saying how many hours you have left till alarm.. And on some cases it does not, and alarm never happens when you want to to be (annoying if you setting alarm for work on Monday morning but it does not come up).
I've tried restarting phone, resetting all alarms, delete/create new alarms, nothing, n o t h i n g helps. The next day it suddenly starts working again..
I've carefully checked all settings (like, work days only, etc..)
but found nothing to explain this problem.

Unable to set weekly alarm for my nokia 5320, any idea..? once save the day turns to other day....
Als o sometime do experience the ringing become very very very very soft... and need a reset of the phone to make it normal... Nokia, what happen to the software/firmware... so far trying to update the version but no latest version for Nokia 5320...
Pls assist... thanks thanks tahsnk...

How to u set your alarm clock but not have the phone or txt go off

Hi, My old phone Blackberry had an alarm. I would set it and then shut the phone off. The phone would turn itself on when the alarm had to go off.
IPone 4 will not do that. So, how do I set the alarm and not have the phone ring or get text alerts. I cannot figure out how to do this.
How do you delete pictures that are not on the camera roll there is a garbage can for those but not for other picture. I have double from synching too many times, this is my first Apple and I am not finding it easy to use.
Thank you

lumpy53 wrote:
If you turn on the mute switch on it will still vibrate when you get a call or text.
You can select whether or not it will vibrate when the mute switch is engaged. Settings>Sounds>Silent. Turn Vibrate on or off.

I updated my iPad to iOS7 and since then my iPad2 does not have sound (says no SOUND EFFECT). I already got it checked by Genius Bar who say that it is not a software problem.

Have done all suggested things including toggle and change in settings. Still it keeps showing a bell (which shows sound effects) but does not enable change of sound / sound in apps.
On Saturday, 3rd may2014 I got an appointment with Genius Bar at WEST 14th street NYC which initially said that this looks like settings issue. So they reset my iPad settings.
When this did not work, they also reloaded the iOS. Even that did not solve the problem. They conveyed that this is a hardware problem and thus they can solve this (except for replacement for which they will charge $250 for an iPad 2.)
However the ringer sound is coming perfect ( the sound is not available in any of the apps but the same speaker works for ringer).
HOW IS THAT SUPPOSED TO BE A HARDWARE PROBLEM THEN? ALSO WHY CAN APPLE NOT CHANGE THE SPEAKERS?
When I conveyed that this is APPLE specific issue, they flatly denied and conveyed that there are NO such cases. When I offered to show it on Aple community, they say THIS HAPPENS TO ONLY A SMALL MINORITY AND IS NOT CONSIDERED A "KNOWN ISSUE".
I HAD GONE AT THE SAME TIME FOR CHANGING MY IPHONE's speaker (for that too, they said that they can only replace my phone with a hefty payment rather than changing the speakers).
THIS AMPLY SHOWED THAT THEY HAD NO INTENTION OF SERVICING THE INSTRUMENTS AND THEY WERE ONLY THINKING OF HOW TO INCREASE SALES BY DRAWING ON THE OLD INVENTORY.
SHOWS RIDICULOUS ATTITUDE OF APPLE.

After I upgraded to Mavericks I was also having this message when I tried to update. There was a previous post about this problem which offered this simple solution which worked for me:
b0n0b0
Re: Recently upgraded to Maverick from SnowLeopard. Unable to get updates from App store.
Mar 15, 2014 9:05 AM (in response to Terence Devlin)
Got it! Thanx. What I did was go to my account, check that they had my new ID and Password which they did, then hit reset button. All fixed.

Satellite L300 does not have sound and modem is also not working

I have this Toshiba Satellite L300 (PSLB8A--1F004) an Australian model which was working perfectly well until I changed the harddrive after it developed bad sectors.
I have installed Win Vista Business.
I have all the drivers (TOSAPINS folder) that came with the original harddrive but when I did installed the drivers by following the correct order. i.e chipset, display, common modules, audio, modem and all other drivers.
There is still a little red x on the taskbar saying " No audio output device is installed" and also I noticed that the modem is not listed under device manager. I have also tried replacing a working modem card from a same model laptop but it is still not showing any signs of picking up the modem as well as sound driver.
I made attemp to download drivers from mytoshiba.com.au under the exact model and OS and installed but to no avail the problem is still there.
No sign of modem picked up and the little red x on taskbar still says " No audio output device is installed" and on device manager its not showing the audio or modem. there is also nothing in yellow exlamation marks and also I've tried to view hidden devices but still there is no sign.
Is there any thing else that I've missed out that I can try again?
WewakMaster

No I dont have the vista service pack and the internet speed at my end is too slow to download it.
So I have tried installing windows 7 but the problem still remains.
I have now removed win7 and have installed WIndows XP SP3 but there is still no sign of audio so Im stuck with win XP SP3 and trying to find solutions now.
I think the problem may have been caused when I upgrade the bios...and Im still looking for ways to downgrade the bios to its original bios to confirm this.

QT does not have sound when play AVI movies

I can not get any sound in my .AVI films in QT.
I have QT Pro 7.6.5 as well as QT 10.
The films play WITH sound in my VLC player but want them to work in QT as well so I can watch them is sound via my Apple TV.
I run the latest Mac software, versions etc. I have installed Perian as well as 3ivx (have a 30 day trial version that is still in the trial period so should work).
What is further getting on my nerves is that my mother in law has the same MacBook Pro as me with the same programs and she GETS the sound in her QT Pro 7.6.4.
I have checked her settings and downloads and can not find any differences (even copied her QT to my MacBook in case there was an error with mine)...
ANY help or advise highly appreciated.
Merry x-mas,
Kenneth

Very poor audio format used in the file (1/4 of the standard sample rate and mono). But I don't have any troubles with it (the audio codec) on my machine.
Some oddball info surrounds your file. The 24 fps frame rate suggests "premium" quality video at HD dimensions yet the audio is highly compressed.
The Perian component is like a "Swiss army knife" (has all kinds of options) and if it can't help your file there may not be much other help for it.
Can you tell us more about the source (where you got the file)?

GarageBand for iLife '08 does not have sounds

When I tried GarageBand for the first time, I brought up the instrumental menus, and when I went to click on one of the sounds, a message popped up stating that I needed to download the music, take it off of a dvd (what dvd?) or update it later. I chose to download it, and nothing happened, only an update for iPhoto happened. I tried the sounds again, and it stated, "You have already initiated the installation of additional content for GarageBand via Software Update. For additional information please open the 'Software Update' application" and from there nothing happens. I have used GarageBand on many other occasions on my school computers, so I know what I am doing (just a heads up for those who might try to post something along the lines of how to use GarageBand).
Thanks

I encountered same problem as Becu55, and followed the suggestion to use install discs. Sucessfully installed the bundle without OS, and still have no loops. clicking on any instrument loop produces the same message:
"You have already initiated the installation of additional content for GarageBand via Software Update. For additional information please open the 'Software Update' application."
I'm perplexed
thanks in advance

After exporting to idvd last half of project does not have sound

I'm about ready to pull my hair out.
I determined my movie was too long for 1 dvd, so I split it up into 2 projects. Part 2 works fine, sound and video. Part 1, get about 1/2 way through and suddenly no sound. I've done all the obvious trouble shooting already. I used export to idvd this last time, and now i'm trying export to quick time and see if my sound is wonky in quick time (when it's done exporting) Is there anything else that could be causing this? The sound is FINE in imovie. Of course I have a time issue, 23 copies by Sunday! yikes! Can anyone advise????

The quick time file looked HORRID! Exported again to iDVD selected Best Quality under project info.. and HORRAY! it worked, no glitches. I have a stack of bad DVD's... now if I could only figure out why it worked this time and not the others...

How come my mini ipad retina does not have sound suddenly ?

After I updated my mini ipad 2 to iOS.7, the sound in my ipad suddenly was not functioning!

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

WINDOWS 8.1 ALARM CLOCK DOES NOT HAVE SOUND

Similar Messages

Maybe you are looking for