Windows 8.1 and ADE 4.0.

using windows 8.1 and ADE 4.0. ADE stops working when minimize to taskbar. Have uninstalled and reinstalled. did not solve problem. Please help as this is very annoying.

OK. We have solved the problem.
After we installed a Apple USB Keyboard, Windows 8 installed new keyboard driver
and finally the normal MacBook Air Keyboard works.

Similar Messages

Crystal 8 Web Component Server ond Windows Server 2003 and IIS 6

I am trying to get Crystal 8 Web Component and Page Server to run on Windows 2003 Server with IIS 6. I have done the following:
Added the .cri and .rpt ISAPI extension mappings
Have Cache ISAPI extentions selected
Deselected "verify that file exists"
Aded the .cri and .rpt MIME types
Added wcsinsapi.dll as a IIS 6.0 extension
The above resolved all HTTP 40x.x errors but when trying to access a report from IE I receive the following error:
Error: Could not connect to the Web Component Server.
The page server and web component server services are running and I do see the listen ports (6401, 6403) active.
I know this is old software but it works quite well under a Windows 2000 Server and other web postings indicate that it is possible to run Crystal 8 under WS2003 and IIS 6.
Does any one know of a white paper/support document that details how to run Crystal 8 under Windows Server 2003 and IIS 6?
Has any one done this successfully?
Any tips as to cause of the "Could Not Connect" problem would be greatly appreciated.

Well as it turns out it looks like it was just this server.
We tried everything, and I added those user accounts to full
permission for the Coldfusion folders and we just could not get it
to work. We tried it on another couple servers running 2003, and it
installed perfectly right out of the box with no other permissions
needed. And those servers were all running default configs with no
other permissions done.
We still have no idea what was the problem, but at least for
now it seems to be this server. But I will tell you what, that II6
stuff seems to be a bit of a pain, we had major problems installing
new version of PHP with it too. Oh well, good luck to you
too!

Jdeveloper 11G and ADE integration

Hi ,
I am planning to use , JDeveloper and ADE . Is it possible to use both in windows platform.
I have a windows XP laptop and have already installed JDeveloper in that. Is it possible to integrate ADE with that ? . Or ADE is only possible to install in linux boxes ?
Pls help
Thanks

Wouldn't this be a question to ask on a ADE forum (if there is one)?
Or you give more info about what you are talking about. Google tells me that ADE is 'Amsterdam Dance Event (ADE)' but I guess this is not what you meant.
Timo

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

I am trying to open my iTunes on a Windows XP laptop and get the error message 42404 "iTunes application could not be opened. Please repair or reinstall QuickTime". I did that and it did not help. Any ideas?

Let's see if a more rigorous uninstall/reinstall procedure gets us past that, nancy. See the following troubleshooting document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

The window 8 store and all other app open and then close immediately .

The window 8 store and all other app open and then close immediately .I
have tried many methods like sfc /scannow,, powershell
-ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\WinStore\AppxManifest.xml without the quotes but , changed registery entries but found no effect . kindly help me !

Hi ObaidMaki,
This forum is to discuss problems of Windows Forms. Your question is not related to the topic of this forum.
I would suggest you posting it in the dedicated Windows Forum
http://answers.microsoft.com/en-us/windows for more efficient responses, where you can contact Windows experts.
Best regards,
Youjun Tang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows 7 desktop and windows 8 desktop connected to router

I have a windows 7 64 bit desktop and a 7510 e photosmart printer connected wireless, though the desktop is wired, I purchased a windows 8 desktop and connected it to my router and set up my email account and it did pick up my printer and could print but not scan or EFax, now I get a 1625 message and cannot print from it.
I tried to download the print and scan wizard from HP web site but my PC froze up.
Do i have to run the disc or set up a home group, not bothered about being able to E Fax or scan to email with it, just need it to print as it did before.
Also on my windows 7 I can log into HP connected and my printer shows up ok, when I press the icon on the printer for Eprint it shows my HP email address but when I press the Fax icon it says NOT CONNECTED TO ANY NETWORK. Cloud services set up a static IP address for me last year as each time we had a power outage I lost my connection to my printer. If anyone can help I would appreciate it.
This question was solved.
View Solution.

Emma22, welcome to the forum.
Here is the Win 8 driver for the printer. Installing them should correct your problem.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

I remove CTIOS 8 in window 8.1, and install CTIOS 9.0 but i am trying to login new one they given the error. Pls help

I remove CTIOS 8 in window 8.1, and install CTIOS 9.0 but i am trying to login they given the error. Pls help

This may help, it allows you to reset the application, it also may be worth clearing out the app store cache and temp files.
http://www.ryanragle.com/index.php?/site/comments/where-does-the-mac-app-store-d ownload-temp-files-to
To contact Apple use the feedback form, this is a user forum and I don't think they will respond here.
regards

Dual boot Windows 7 (64) and Arch Linux (64) problems

Hello:
I am new to Arch Linux and just finished installing the 64bit on my laptop. It had a prebuilt Windows 7 (64) installed which I kept but split the hdd from 160Gb to 80Gb and 80Gb. I installed Arch there and set 4 partitions, all of them as Logical - a 64 MB ext2 /boot partition; a 512 MB swap partition; a 15 GB root partition; and the rest as my /home partition. My partitions look like this:
Disk Drive: /dev/sda
Size: 160041885696 bytes, 160.0 GB
Heads: 255 Sectors per Track: 63 Cylinders: 19457
Name Flags Part Type FS Type [Label] Size (MB)
sda1 Primary Unknown (27) 12889.02
sda2 Boot Primary NTFS 106.93
sda3 Primary NTFS [] 73915.11*
sda5 Logical Linux ext2 65.81*
sda6 Logical Linux 509.97*
sda7 Logical Linux ext2 15002.92*
sda8 Logical Linux ext2 57549.55*
The install was succesful(this was running from the core install cd) and I installed GRUB to my /boot but when I restarted it loaded Windows 7. I have used Knoppix USB disc to boot and see my Arch Linux install files and edited the /boot/gur/menu.lst file.
In Windows I installed EasyBCD 1.7.2 and tried to get NeoGrub bootloader working as a dual boot. I tried getting rid of the boot flag for Windows with cfdisk and setting it to my (Logical) sda5. That did not work. So far the only way I have booted into my Arch Linux install has been by going to the Live CD, choosing "Boot from Existing Linux Install" and editing the command files there.
root (hd0,4)
kernel /vmlinuz26 root=/dev/sda3 ro
initrd /kernel26.img
My goal is to get a dual boot working for Windows 7 and Arch Linux 64 and continue installing the Xorg and KDE to Arch. I just don't know what the problem is here. I don't mind reinstalling Arch if something went wrong, but I would like to keep my Windows running in order and add Arch on.
Any help would be greatly appreciated.

I ran the LiveCD and chose "Install to MBR hd0". I ended up with this:
setup hd(0,1)
Checking if "/boot/grub/stage1" exists.....yes
Checking if "/boot/grub/iso9660_stage1_5" exists.....yes
Running "embed /boot/grub/iso9660_stage1_5 (hd0,1)".....failed(this is not fatal)
Running "embed /boot/grub/iso9660_stage1_5 (hd16)".....failed(this is not fatal)
Running "install /boot/grub/stage1 d (hd0,1) /boot/grub/stage2 p (hd0,1) boot/grub/menu.lst".....failed
Error 31: File is not sector aligned
My entry for Windows into the menu.lst looks like this:
# (0) Arch Linux x64
title Arch Linux x64
root (hd0,4)
kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
initrd /kernel26.img
# (1) Arch Linux x64
title Arch Linux x64 Fallback
root (hd0,4)
kernel /vmlinuz26 root=/dev/disk/by-uuid/3841273c-d91e-41d6-9dbf-716a15d03a01 ro
initrd /kernel26-fallback.img
# (2) Windows 7
title Windows 7
rootnoverify (hd0,0)
makeactive
chainloader +1

Dual boot WIndows 8.1 and Windows 7 (32 bits) from separated disks gives error 0XC0000359

Hi all,
I have two disks, each with a (OEM) installed OS on it, a Windows 8.1 (64 bits) and Windows 7.0 (32 bits). The later came from mine old computer that unfortunately died to soon. So I have two disks and two OS in an brand new machine (with UEFI BIOS etc.).
Installing a dual boot option was a pace of cake. However booting into Windows 7.0 gives following error:
"Windows failed to start. A recent hardware of software change might be the cause.
File:\Windows\system32\winload.exe.
Status: 0XC0000359
Info: the application or operating system could't be loaded because a required file is missing or contains errors".
There is lot discussions about installing two OS but that is not mine problem: both are already installed.
Also there is much rumour about the UEFI BIOS and support for older systems. In mine medion computer the Security Boot option is disabled (by the OEM), so booting from a old BIOS should be possible, must isn't.
Someone advised me to run the recovery disk (of Windows 7.0) and run Bootmgr. However the system refuses to boot from CD/DVD with the recovery disk of Windows 7.0 inserted, booting from the recovery disk of Windows 8.1. goes fine.
Removing the disk with Windows 8.1 installed on it and directly booting in Windows 7.0 fails too with the message: "Reboot and Select proper boot device or: Insert boot media in selected boot device and press key". Also in this case the system
refuses to boot from the Windows 7.0 recovery disk.
Could you please help me?

Hi,
To rebuilt boot loader, I suggest we can try following command when you enter Windows 8.1.
Run cmd as administrator and type following command:
BCDboot [Partition Letter with windows 7 installed]:\windows
Note: if you installed Windows 7 on Partition F, the command can be write as: BCDboot F:\windows.
Then, restart and boot into Windows 7.
What’s going on?
Kate Li
TechNet Community Support

HT1386 I just reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. Help!

reinstalled my windows operating system and decided to put on windows 8. After loading all of my music back into a freshly installed itunes, my 4th gen ipod is not recognized by itunes. My 1st gen ipod nano works with no problem. I can eliminate any problems with the cable and connection.
I've stopped and started the service, and also have performed cold reboots.
Nothing seems to have helped the situation.
Help!

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?
The iPod Classic uses different drivers than the Nano

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

My itunes 11 Home sharing is not working with my windows 7 PC and iPad it shows up on iPad and when I go to share the music app does loading for 3 mins and crashes I am using a virgin super hub router please please please help

Trouble with Windows 8.1 and hp officejet 8620

Hi, we've installed a brand new hp Officejet Pro 8620.
We've installed the full software package on a Windows 8.1 machine.
It all seemed to be fine, but suddenly our machine is not capable of print on certain circumstances:
- It can't print from:
a) Notepad: "incorrect parameter" error message
b) Office: Word, Excel, etc... no error, but it simply does not print
c) Adobe Acrobat: no error, but it simply does not print
d) Test print from printer configuration: error
but it CAN print from:
a) hp printer assistant, hp print scan and doctor (hp software)
b) hp AiO printer remote (it's a Metro app), only pdfs
c) Internet Explorer, Google Chrome, etc...
We've tried to reinstall the whole package with no success. It seems that's something's wrong with the driver and desktop applications, any ideas? Anyone with similar problem?
Best,
K
This question was solved.
View Solution.

Finally we've used the proposed solution on:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Is-Windows-8-1-and-HP-8620-compatible/t...
The trick is drivers for 8600 must be downloaded and installed before the change. 8600 drivers included with 8.1 don't work.
We'll wait for new 8620 drivers that could fix this problem. Meanwhile, we can print with 8600 drivers, and scan with 8620 drivers.
Best,
JM

How do I get the pictures folders in photoshop 7 out of My window XP computer and put them into my new computer windows 8 photoshop12

How do I get the pictures folders in photoshop 7 out of My window XP computer and put them into my new computer windows 8 photoshop12

I am so sorry for you and your situation. Were you using iCloud photostream?
Otherwise I do not see any chance for your precious photos.
Congrats anyway on the little darling!

Windows Phone sync and transfer options

This post explains the options available for synchronizing and transferring contacts, calendar and tasks from your Windows PC to a Nokia Lumia with Windows Phone.
How Contacts, Calendar and Tasks are synchronized between a Windows PC and a Lumia family phone depends on which software is used on the PC
If a S40, S60 or Symbian Nokia phone was used before contacts, calendar and tasks can be synchronized between this phone and your PC using Nokia Suite with the following:
Microsoft Windows 7 contacts
Microsoft Windows Vista calendar and contacts
Microsoft Outlook 2002, 2003, 2007, 2010
Microsoft Outlook Express
Mozilla Thunderbird
Nokia Suite (v3.6.x and later) allows for an easy transfer of contacts, calendar and photos to your Nokia Lumia Windows Phone via SkyDrive.
Here's how this feature works;
Connect your Nokia S40, S60 or Nokia Belle phone to your PC using the USB cable.
After Nokia Suite is started and your phone shows as connected select Tools>Upload to SkyDrive and follow the on screen instructions. If you do not have one yet you will have to create a Microsoft account which has a SkyDrive attached to it. You can create such account here.
You will now have to reset your Nokia Lumia Windows Phone. Doing so will erase all content from the phone and return it to it's 'out of the box' state. Make sure you have synced any media files to your PC (Zune for WP7.x devices / copy them through explorer on WP8.x devices) or Mac(Connector). You can sync these back after the reset. When finished reset your Nokia Lumia Windows Phone using Settings>about>reset your phone.
Go through the Device First Use sequence and when asked enter your Microsoft Account used to save the content from Nokia Suite. When the setup has finished your will find your contacts, calendar and photos have all transferred to your Lumia. These will also be available through your Microsoft account through the web interface. The list of installed (paid) apps is also restored and the phone will start downloading these once the restore is complete. You can switch to WiFi for this if you have access.
It is important to note this transfer will only work to the Nokia Lumia at the Device First Use sequence (after a reset). If you have your Lumia setup it will not look for or sync the information copied to SkyDrive through Nokia Suite.
SMS message can not be transferred directly, but you can export all messages in Nokia Suite (Messaging>File/Export all text messages) and open the resulting Comma Separated File (.csv) in Excel or OpenOffice Calc to create an Excel sheet (.xls file) this can then be copied to your SkyDrive and opened from the Office app. You could also use a tool to create separate files from the exported .CSV file and copy all of these to SkyDrive.
If a Microsoft Exchange server is used an Outlook account is created on the Lumia. This is done through 'Settings > email + accounts >add an account > Outlook'. The following settings are required. Usually these can be obtained from the system administrator for the Exchange server:
Mail address
User name (usually the same as the login name for the business PC)
Password (usually the same as the password for the business PC)
The Microsoft Exchange server Domain
The address for the Microsoft Exchange server
If Microsoft Outlook is used for private mail account(s) the Outlook Hotmail Connector needs to be installed to synchronize with the primary Microsoft Account and with the Lumia.
The mail account needs to be set up as a separate mail account through:
'Settings > email + accounts >add an account > other account'
More information on setting up a mail account can be found here.
A useful tool for setting up the Outlook Hotmail Connector can be found here.
Additional Microsoft support pages for contacts and calendar.
If Windows Mail, a part of Windows Essentials, is used contacts, calendar and tasks are synchronized directly with the Lumia as long as you log in to Windows Mail using the same primary Microsoft Account as the one which is used on the Lumia. Contacts and/or calendar can be imported in to Windows Mail as follows:
Microsoft Windows 7 contacts, Microsoft Windows Vista contacts (and calendar)
Open Windows live mail
Go to contacts
Click on import
Import from current Windows user
Mozilla Thunderbird
Use the Hotmail extension for Thunderbird
Export contacts and import into Windows Mail
I hope this is helpful
Kosh
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Article updated, changed Live ID to Microsoft account and added procedure available in Nokia Suite from v3.6.x
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Jabber for Windows 9.1 and WebEx Voicemail Tab

Guys
we are using both Jabber for Windows (9.1) and WebEx connect clients. both connect to WebEx cloud services. when we use WebEx connect we have all features including voicemail but when we use Jabber for Windows there isnt any voicemail option at all present.
both are doing phone integration and everything else is working fine.
Now when we do the same for our andriod tablets we have the option for voicemail.
i understand that there are several feature differences but based on the searches ive been doing, voicemail should be present and i havent actually seen anyone having this problem. Note, this is using WebEx not CUPS.
i know im probably missing something completely here.
thanks again

Do these users all have a conferencing profile assigned to them in CUCM (9.0) or CUPS (8.x)?
Regards,
Erik
Sent from Cisco Technical Support iPad App

Windows 8.1 and ADE 4.0.

Similar Messages

Maybe you are looking for