Windows 8.1 and IOMEGA External Hard Drive Issues

Since I upgraded from Windows 7 to 8.1 my computer will not now recognize my IOMEGA external hard drive.  How could just updating Windows not allow my hard drive to be accessed?  Please help?  I do taxes on the side and all my clients's
tax returns are on this external drive and need to be accessed.  I have a laptop with Windows 7 and it recognizes the hard drive with no problem.  Only problem is I do not want to do taxes on my laptop.  Is there a patch somewhere to help? 
If not,how much trouble is it to go back to Windows 7 because this issue is a serious one with me?  I know I am not the only one with this issue because if you search on IOMEGA the issue is going on with others.  I just have not seen a real
solution to the problem yet. Thanks in advance to anyone who can help me.

Hello Dewayne H,
What is your current situation?
Have you tried the solution as britishdhez mentioned?
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Similar Messages

  • I have tried and failed to copy my iTunes library and playlists from my Windows 8 desktop to my Windows 7 laptop using an external hard drive. Can it be done? Help would be appreciated.

    I have tried and failed to copy my iTunes library and playlists from my Windows 8 desktop to my Windows 7 laptop using an external hard drive. Can it be done? Help would be appreciated. I have followed instructions found online but the library of music doesn't pull in.  Thanks!
    Nate

    Migrate an iTunes library from one computer to another
    These are two possible approaches that will normally work to move an existing library to a new computer.
    Method 1
    Backup the library with this User Tip.
    Deauthorize the old computer if you no longer want to access protected content on it.
    Restore the backup to your new computer using the same tool used to back it up.
    Keep your backup up-to-date in future.
    Method 2
    Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entireiTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
    Both methods should give the new computer a working clone of the library that was on the old one, with ratings, play counts, playlists etc. preserved. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
    I'd normally recommend method 1 since it establishes an ongoing backup for your library and unlike copying with Windows Explorer the process can be resumed if it is interrupted and it will continue to the next item if there are any read/access errors.
    Note if you have iOS devices and haven't moved your contacts and calendar items across then you should create one dummy entry of each in your new profile and iTunes should  merge the existing data from the device.
    If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See Make a split library portable.
    Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then seeRecover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
    tt2

  • HT201269 I have my iTunes library on my Windows 7 machine on an external hard drive.  I purchased a new Macbook and would like to point my new machine at my iTunes library without losing anything and then deactivate iTunes on the Windows machine, help ple

    I have my iTunes library on my Windows 7 machine on an external hard drive.  I purchased a new Macbook and would like to point my new machine at my iTunes library without losing anything and then deactivate iTunes on the Windows machine, help please

    Sorry, but this does not seem to be an iPad question. I'd therefore suggest you ask in the iTunes for Mac forum.
    Regards.

  • I have a windows 7 desktop with an external hard drive setup on my home network, will i be able to access this on my home network to save and retrieve files from my mac air?

    i have a windows 7 desktop with an external hard drive setup on my home network, will i be able to access this on my home network to save and retrieve files from my mac air?

    Troubleshooting Home Sharing - http://support.apple.com/kb/TS2972

  • I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

    I have just upgraded from a Macbook to a Macbook Air. I have been using a iomega external hard drive for Time Machine, which use a Firewire. However, Macbook Air's do not have a Firewire port and i cannot find an adaptor anywhere. Can anyone help?? Thanks

    There has never been a reliable firewire ---> USB adapter suitable for external high speed storage.  This was a major issue when the MacBooks lost the firewire port a number of years ago (Apple subsequently brought it back).
    The only high speed port on the Air is the ThunderBolt port.  There are external ThunderBolt drive options out there, but they're somewhat more expensive than traditional USB/FireWire options.

  • Iomega external hard drive not appearing in Disk Utility

    I have a MacBook Pro (from 2011) and I'm running OS X 10.9.5. I have an old Iomega external hard drive. I'm not certain but this thing might be about 3-4 years old? When I connect the drive to my MBP, it shows up in Finder under Devices. But what appears is the Windows disk utility that is pre-loaded on the drive. The actual drive does not appear and I can't move files onto it in Finder.
    When I go into Disk Utility and try to format the drive for Mac use, it doesn't appear.
    Is there anything I can do or am I stuck with this old drive that doesn't work with Macs?

    Try following tips.
    USB and FireWire Quick Assist - Apple Support

  • Problem with saving from white Macbook to Iomega external hard drive

    I'm sorry if this question has been asked before but i cannot find any thread, so i apologise in advance!
    I recently have bought a white macbook, but i have a Iomega external hard drive 250GB (which is not full and nowhere near full)I able to move songs and photos over to iTunes and save on my iPhone okay with no problem. The problem arises when i want to do it the other way, I basically want to save documents, songs and pictures on my macbook over to the external hard drive.
    The icon for the external hard drive appears and everything works. I was suggested to use iTunes > preference > advanced and change the location to my hard drive. I have tried this and all it does it make an additional copy on iTunes not on the hard drive.
    I would be grateful if someone could please help me as i do not have a clue!
    Thanks
    Gemma

    My guess is that the external drive is formatted for windows (NTFS) and for the Mac it would be read only. You can't write to the disk unless you use a third party application like [NTFS-3G|http://www.macupdate.com/info.php/id/24481/ntfs-3g].
    If you're only going to use the drive with your Mac, I suggest reformmating it for Mac (Mac Extended (Journaled)) using Disk Utility. This process will erase the drive so if there's any more stuff that you need, reclaim that first.

  • Iomega external hard drive compatability

    I have an iomega external hard drive in the Windows NT File System and all of my files are now read only when I connect to my Macbook Pro. Does anyone know what I can do to be able to delete/add files to the external hard drive again? Thanks in advance for any advice!

    Install software such as Paragon NTFS on the computer, or use the Disk Utility to erase the drive, specifying Mac OS Extended (Journaled), MS-DOS, or exFAT as desired.
    (103581)

  • Iomega external hard drive either 'not found' by Time Machine or is now in 'read only' format

    I don't know what's going on with my iomega external hard drive.  Sometimes the HD is recognised by the computer; other times it isn't; if it isn't I can restore to an earlier back up via Time Machine app; but it's like the disk isn't writable.
    Ten days ago, I had trouble backing up my iMac using Time Machine.  After turning it off and restarting my external hard drive, it backed up successfully.
    However, today I am trying to back up my files, and TM tells me it can't find the external hard drive.  Nothing has changed -- I have been out of town this past week -- but somehow my HD now seems to be in 'read only' format.  It does turn on, and I could restore my computer to an earlier back up.
    "Mac OS X can't repair the disk.  You can still open or copy files on the disk, but you can't save changes to files on the disk.  Back up the disk and reformat it as soon as you can."
    Annoyingly, despite my HD not showing in Finder or on my Desktop (as it usually does), when I simply turn it off I get that warning message "The disk was not ejected properly".
    Have tried verifying and repairing using Disk Utility, to no avail. 
    Am prompted to reformat but I don't have a good understanding of what this means and how to do it.  I'm guessing this would wipe the disk clean and I'd have to create the initial back up image all over again -- I'm reluctant to do this since this HD is my only back up and if it all goes tits up I'll be up that famous creek without a paddle.
    Thoughts, suggestions, input all welcome and deeply appreciated -- thank you!

    fzgy wrote:
    "Mac OS X can't repair the disk.  You can still open or copy files on the disk, but you can't save changes to files on the disk.  Back up the disk and reformat it as soon as you can."
    It's possible a heavy-duty 3rd-party disk repair app can fix it, but they're expensive (DiskWarrior is about $100), and there's no guarantee it can do it.
    Am prompted to reformat but I don't have a good understanding of what this means and how to do it.
    That will erase it.  See Time Machine - Frequently Asked Question #5.
    It sounds very much like the disk is beginning to fail, although it's possible there's a bad port, cable, connection or power supply (if it has its own).
    I'd suggest getting a new one, and using it for your Time Machine backups; once you have a good backup there, reformat the old one (and select Security Options to write zeros to the whole drive -- if that fails, you know the drive is toast).  Use it for secondary backups, per FAQ #27.   If it has failed, get a second new one for secondary backups. 

  • Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board.  is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

    jrburrows wrote:
    Ok, fair enough.  But since Job's death - Apple's control on leaks has been terrible.  I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones.  Because of the vast ammount of leaks.  With the iPad mini leaks, it's 99% sure to come out next week.
    Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
    Amd by "others" I meant other people on iPads - not other devices/manufacturers.  It's possible to do so, I just want to know how.  I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
    No, USB is not the future, you missed the memo about cloud and wireless computing?

  • Can you use VMware Fusion to run a windows 7 VM on an external hard drive

    I have the latest version of Mountain Lion running on a MacBook Air 11' with 4GB or Ram and an SSD of 128GB.  I have purchased the latest version of VMWare's Fusion Product.
    Since it takes up so much room to run on the SSD drive, I was wondering if it was possible to install a Windows 7 instance (I have the ultimate version with ISO already sitting on the Msc and External Drive) and access it from the Mac to run my windows programs.
    So in short:
    MacBook 11"  Latest Version of Mountain Lion  Latest version of Fusion
    Want to run Windows 7 VM on an external hard drive rather than installing it on my internal drive.
    Can this be done?  If so, how?
    Thank you so much for reading this and hopefully someone can help.
    mkkoenig

    My external drive is FAT 32 and my MacBook recognizes it, however Fusion does not.  So if I buy a brand new external hard drive, format from scratch FAT 32, use Fusion to create that VM, I should be able to install Win 7 on the external drive and use it via Fusion?
    Sorry if I am dense, just trying to make sure I understand. :-)

  • I can not delete or copy new files to my Iomega external hard drive

    Hi,
    I can not delete or copy new files to my Iomega external hard drive. Opening hard drive folder I can see that I can not overwrite it. I have heard that I need to install some program for the external hard drive to operate properly in Mac.
    Please help what to install or there is some other option.
    Thnx

    I'm not the expert on this since I have never done it. It sounds like you may need a data rescue program like Data Rescue III. I believe you can download a demo and see if you can see the files. If you can, then you can buy the program and retrieve the files. I don't know if Disk Utility can restore them--I think they have to be visible but this is not something I have ever had to do.
    In the meantime, don't do anything with the drive--you don't want to overwrite any files. Hopefully all or most of the files are still there and you will be able to retrieve them. The less the drive is used, the better your chances are of retrieving the data.
    Forgive me for not realizing that there were files on the drive that you wanted to save. Upon re-reading your question, I now see that there were. I should have known to warn you, and my bad that I didn't.
    Good luck!

  • HT1338 My Mac Mini stopped recognising Iomega external hard drive via USB 2.0 connection. Any suggestion to get way around? Thanks.

    How can I make my Mac mini recognise again iomega external hard drive, if it has stopped to do so?
    many thanks.

    [USB and FireWire Quick Assist|http://support.apple.com/kb/HT1151]
    [Common fixes for USB device issues (unrecognized, etc.)|http://www.macfixit.com/article.php?story=20070824012114701]
    [What to do if your computer won't recognize a FireWire or USB device|http://support.apple.com/kb/HT1317]

  • Snow Leopard upgrade - now iomega external hard drive cant be seen

    I've been using an Iomega External Hard Drive (RPHD-C) to run Time Machine as my back-up. Upgraded to Snow Leopard yesterday and - no external Hard Drive. Doesnt show in Disk Utility. Any ideas?

    Disconnect the disk and power it down for a few minutes, then reconnect, see if Disk Utility recognizes it.
    If no help, disconnect again, and Restart your Mac, then reconnect the drive.
    If it's connected via USB, try FireWire; or vice-versa.
    If still no help, try different ports, cables, and combinations of the two (sometimes a plug that works fine in one port won't make good contact in a different one).

  • Recover files from iomega external hard drive to mac 10.6.2

    I'm very frustrated.  I have 50gigs of documents and photos sitting in my iOmega external hard drive, some of which I need to print for my mother's funeral on Saturday.
    I am computer savvy but not a tech, so I'm having difficulty understanding how to get my Mac to open these files in my iPhoto program, or PS Elements 9.
    I don't have any money, so I can't purchase any software at the moment, but i DESPARATELY need to open these photo files to print them off tomorrow.
    Please can someone help me find a quick, easy, and free solution.
    These files were backed up from my PC before I bought my first Mac in Dec 2010.

    iPhoto/File/Import to Library should bring the desired photos into iPhoto.

Maybe you are looking for