Windows 8.1 and OES2 SP3

I've noticed that Windows 8.1 iprint is currently support for iPrint Appliance and OES 11 server only. Will Novell release update for iprint server code for OES2 SP3 to support Windows 8.1? I do not want to upgrade to OES11 at this point.
Thanks,

poweruser wrote:
>
> I've noticed that Windows 8.1 iprint is currently support for iPrint
> Appliance and OES 11 server only. Will Novell release update for
> iprint server code for OES2 SP3 to support Windows 8.1? I do not want
> to upgrade to OES11 at this point.
To add to Mysterious' post, OES 2 went out of general support 31 July
2013. As a result there are no further enhancements coming to OES 2.
If you don't want to upgrade to OES 11 you could always implement the
iPrint appliance and migrate printing over to it while leaving the rest
of your services on OES 2 until you'r eable to upgrade.
Your world is on the move. http://www.novell.com/mobility/
We know what your world looks like. http://www.novell.com/yourworld/

Similar Messages

Java and OES2 SP3

Good day,
Had a question concerning the following:
1.) There was a TID in regard to JAVA no longer being included in the Channel updates any longer, does anyone have that TID number, or know if this is still relevant?
2.) What is the latest version of JAVA on OES2 SP3?
Thank you,
DS

Hey Ds,
Originally Posted by dschaldenovell
1.) There was a TID in regard to JAVA no longer being included in the Channel updates any longer, does anyone have that TID number, or know if this is still relevant?
Java IBM 1.6 and 1.7 are still in the update channels AFAIK (for SLES 11), where did you remember reading that?
You do realize OES2 SP3 is out of general support (since July last year/2013)?
Originally Posted by dschaldenovell
2.) What is the latest version of JAVA on OES2 SP3?
Can't check, all my OES2 SP3 servers have been upgraded to OES11. A quick look on an SMT server shows this one : http://download.novell.com/Download?...d=KfMV2KXyWVs~ (java-1_6_0-ibm-1.6.0_sr14.0-0.11.1.x86_64.rpm / java-1_6_0-ibm 8657)
I'm curious why you are inquiring for this?
Cheers,
Willem

I was running Lightroom 3.6 with the OS Windows XP (Sp3). The whole system crashed, I am unable to recover the serial number. I then upgraded my OS to Windows 7 (x64) and down loaded Lightroom 4.4, I wanted to buy a licence so I then upgraded to Lightroom

I was running Lightroom 3.6 with the OS Windows XP (Sp3). The whole system crashed, I am unable to recover the serial number. I then upgraded my OS to Windows 7 (x64) and down loaded Lightroom 4.4, I wanted to buy a licence so I then upgraded to Lightroom 5, now when I try to register I am asked for the original licence/serial number. Where do I go from here??????

If you upgraded from 3.6 to 5 (you didn't indicate buying 4.4) then you will need the serial number from 3.6 in order to be able to use 5. If you did not keep a record of it there is a chance it might be available thru your Adobe account online, but if not, there is likely not much you can do except to return the upgrade and purchase a full version. Try contacting support using chat and explain your situation to see if they can help.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
If you did purchase 4.4 then that should be sufficient to use to activate 5.
I can never be sure what goes on with Lightroom, and the Adobe site (even when it works properly) makes finding information about products difficult these days so I am at a loss to confirm anything I say.

Netware 6.5 SP8 to OES2 SP3 Migration Error with migfiles

Hi,
at first. We would like to abuse the migfiles tool to mirror data from Netware to OES2 SP3 with trustees !! Do you know a better tool than migfiles, please let me know. Its very important for me to use a CLI Command tool like migfiles, because it should run automatically.
We want to mirror data from a Netware 6.5 SP8 NSS Volume to a OES2 SP3 NSS Volume with trustess. The first migration with following line works without any error:
migfiles -s IPAddress -V Daten -x /media/nss/D4/Test3/ -i
From this point we need the -sync parameter to keep the data current.
I use this:
migfiles -s IPAddress -V Daten -x /media/nss/D4/Test3/ -i --sync "22-07-2011 16:26"
But then i became this errors:
Error: nbackup: Failed to restore: DATEN:VOLDATA.TDF
Error: nbackup: Received error: 0xfffdffdc ((libtsafs.so 6.50.0 291) An invalid path was used.) from NWSMTSWriteDataSet
Error: nbackup: Failed to restore: DATEN:tsa5up24/NWTAPE/
Error: nbackup: Received error: 0xfffdffdc ((libtsafs.so 6.50.0 291) An invalid path was used.) from NWSMTSWriteDataSet
Error: nbackup: Failed to restore: DATEN:tsa5up24/NWTAPE/NWTAPE.CDM
Fatal: Failed to restore data. Could not find destination path. If the destination path is a cluster resource, then check whether the resource is moved.
Fatal: nbackup: Received error: 0xfffdffe5 ((libtsafs.so 6.50.0 282) The data set handle is invalid.) from NWSMTSOpenDataSetForRestore
When the Sync job is finished, no file which was changed on the Source was migrated to the destination.
For your information. With the Novell Migration Tools (GUI) i have the same error. But with the Windows version "Novell Server Consolidation and Migration Toolkit" it works without any errors. But its a GUI tool without the possibility to run it automatically.
Any ideas
Thanks Andreas

Hi,
thank you for your reply. This is the log:
D, [01-08-2011 14:33:07#4872] DEBUG -- migfiles: migfiles command started at 01-08-11 14:33:07
D, [01-08-2011 14:33:07#4872] DEBUG -- migfiles: migfiles command executed as: /opt/novell/migration/sbin/migfiles -s xxx.xxx.xxx.103 -V Daten -x /media/nss/D4/Test3/ -i --sync 22-07-2011 16:26 --debug
D, [01-08-2011 14:33:07#4872] DEBUG -- migfiles: Calling function getCredentialDetails
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: Successfully taken credential Details of source and destination server from user
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: nbackup command executed as LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -U "admin.havas" -R xxx.xxx.xxx.103 --list-tsa-version
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: Major version of source tsafs is 3
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: Minor version of source tsafs is 1
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: ncpshell command executed as /opt/novell/ncpserv/sbin/ncpshell --ip=xxx.xxx.xxx.103 --u="admin.havas" --vinfo --parm1="Daten"
I, [01-08-2011 14:33:22#4872] INFO -- migfiles: Given destination path is NSS
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Source path is Daten:
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Destination path is /media/nss/D4/Test3/
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Successfully returned from function verifyAndFixSrcPath
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Destination volume type: NSS
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Calling function get_nss_vol_and_mnt_point_from_path
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Calling function is_compression_enabled
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Started on: "1-8-2011 14:33:22"
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: smstool cmd = LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/smstool --srcuser ".admin.havas" --destuser "root" -R xxx.xxx.xxx.103 --sync-time "22-07-2011 16:26" --output-file /tmp/smstoolOutFile.4872 --finddiff "Daten: /media/nss/D4/Test3/" 2>&1
I, [01-08-2011 14:33:23#4872] INFO -- migfiles: Generating list of files and folders to be synced
D, [01-08-2011 14:33:23#4872] DEBUG -- migfiles: Executing nbackup command from syncfiles: LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -cF --disable-caching -U ".admin.havas" --expand-compressed-data -R xxx.xxx.xxx.103 -T /tmp/smstoolOutFile.4872 | LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -xvF -U "root" -r "Daten: /media/nss/D4/Test3/"
D, [01-08-2011 14:33:23#4872] DEBUG -- migfiles: nbackup cmd = LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -cF --disable-caching -U ".admin.havas" --expand-compressed-data -R xxx.xxx.xxx.103 -T /tmp/smstoolOutFile.4872 | LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -xvF -U "root" -r "Daten: /media/nss/D4/Test3/"
D, [01-08-2011 14:33:23#4872] DEBUG -- migfiles: Calling function doCmd
D, [01-08-2011 14:33:25#4872] DEBUG -- migfiles: Checkpoined at
D, [01-08-2011 14:33:25#4872] DEBUG -- migfiles: Checkpoined pair 0
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Failed to restore: DATEN:VOLDATA.TDF
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Received error: 0xfffdffdc ((libtsafs.so 6.50.0 291) An invalid path was used.) from NWSMTSWriteDataSet
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Failed to restore: DATEN:tsa5up24/NWTAPE/
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Received error: 0xfffdffdc ((libtsafs.so 6.50.0 291) An invalid path was used.) from NWSMTSWriteDataSet
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Failed to restore: DATEN:tsa5up24/NWTAPE/NWTAPE.CDM
F, [01-08-2011 14:33:25#4872] FATAL -- migfiles: Failed to restore data. Could not find destination path. If the destination path is a cluster resource, then check whether the resource is moved.
F, [01-08-2011 14:33:25#4872] FATAL -- migfiles: nbackup: Received error: 0xfffdffe5 ((libtsafs.so 6.50.0 282) The data set handle is invalid.) from NWSMTSOpenDataSetForRestore
Thank you
Andreas

IFolder keeps prompting upgrade after OES2 SP3

Hi everyone,
After applying OES2 SP3 our iFolder server keeps prompting upgrade on
Windows XP clients. It suggests upgrading to 3.8.0.4 but when you let it
run, it shows windows installer options install and uninstall, there is
a space where the upgrade button should be. Neither option works.
I've also downloaded from the web server page the ifolder client, but
doesn't seem to be that version number.
Is there any way to disable the annoying prompt?
Thanks,
Miguel.

Originally Posted by mcando
Is there any way to disable the annoying prompt?
Thanks,
Miguel.
Section 6.12 of the iFolder 3.8.4 Admin Guide lists a way to disable the upgrade prompt.
Edit the unix-version.config, mac-version.config, and/or version.config (aka windows-version.config) files located in either /opt/novell/ifolder3/lib/simias/web/update or /opt/novell/ifolder3/lib64/simias/web/update.
Replace the <version> </version> section of the .config files with the level of client your users already have. Then they should not be prompted to upgrade.
Andrew

Firefox freezes trying to download or save files, Import/Export bookmarks, clicking (Tools) Options (was: Fire Fox crashes in Windows safe mode and in Firefox Safe mode)

Hi
XP sp3 4gb ram
Firefox 6.0.2
Firefox crashes every time I do any of the following. Then I have to force quit Fire fox.
If i click a download link on a web page, Firefox freezes the instant I click the link
...but Firefox does not freeze if I click a web link on a web page or page navigation link.
If i go to the Menu bar > Tools > Options, Firefox freezes the instant I select Options from the Tools menu.
...but Firefox does not freeze if select any other item from the Tools menu.
If I go to the Menu bar > File, Firefox instantly freezes the instant I select either "Save Page as..." or "Open file..."
...but Firefox does not freeze if I select any other option from the File menu such as: New Tab, New Window, Send Link, page Setup, Print, Exit etc
If I go the Menu Bar > Bookmarks > Show all Bookmarks > Import and Backup, Firefox instantly freezes the second I select "Import" or "Export"
... but Firefox does not freeze if I select any other command in the Bookmarks sub menus, nor does it freeze if I back out of the menu entirely.
Same as above for History if I select "Import" or "Export"
...so I have isolated the problem to a limited number of commands in Firefox that cause Firefox to freeze... described above. Everything else in Firefox works fine.
HERE IS A SUMMARY OF WHAT CAUSES THE FREEZING:
• Clicking a download link on a webpage
• Going to the Menu Bar > File and selecting "save as" or "Open File"
• Going to the Menu bar > Tools and selecting Options.
• Going to Bookmarks > Show all Bookmarks > Import and Backup and selecting either "Import" or "Export"
• Same as above for History if I select "Import" or "Export"
Everything else in Firefox works fine. I went through every menu command and checked for freezes. Only the commands I mentioned above cause the freezing.
I tried the following to try to fix it:
• Reset my modem and router (Problem still exists)
• Uninstalled FF. Deleted folders, profiles (Downloads.sqlite), Registry entries. Reinstalled. (Problem still exists)
• Restarted FF in Firefox safe mode. (Problem still exists)
• Restarted in Windows Safe mode and then started FF in Firefox safe mode (Problem still exists)
• Disabled Window firewall. Disabled ZoneAlarm firewall, Shutdown ZoneAlarm firewall. Set Internel Options to default settings. (Problem still exists)
• I reset the config option: browser.download.manager.scanWhenDone to false
What does work?
• Firefox does not crash when I click a link an go a website, navigate a page, use a menu item command.
• Firefox works fine on my other computer.
• Internet Explorer works fine on the computer that Firefox is having a problem on.
• My other applications work fine on the computer that Firefox is having a problem on.
I want to add that, I just overcame the XP Recovery Virus by following a post that suggested running the following software to fix the virus. Everything seems back to normal except Firefox.
The software I ran to fix the problem are listed below:
• malwarebytes
• superantispyware
• ccleaner
• combofix.
• smart defrag
• then load a good anti-virus. (I ran Zone Alarm virus scan)

Hi.
This is about a question you posted to the Firefox Support forum three months ago (I'm sorry you never got an answer).
Did you ever fix the problem where Firefox freezes or hangs, when clicking a download link or using (File menu) "save as" or "open file"? Or when going to the Firefox (Tools) menu and clicking Options ? Or trying to Import or Export bookmarks?
I found this thread searching for a solution for someone on MozillaZine's support forum who's having a similar issue. See this thread: (maybe something he's tried that didn't work for him will work for you?)
http://forums.mozillazine.org/viewtopic.php?f=38&t=2382953&start=15
<br>Cannot download or click tools -> options

Exchange 2010 , Windows 2008 R2 and framework 3.5 SP1

Hi all ,
I have questation about protection exchange server 2010 with framework 3.51 SP1 running in the windows 2008r2 serveru . The DPM server is instaled in the windows 2012r2 server and supported version in this os is 2012R2 RU5 . After install i upgrade client
in the exchange serveru . and i the DPM console is status OK ? It is Ok ??? Or which client is running without fw 4.0 ? In another server I try run c:\Program Files\Microsoft System Center 2012\DPMAgentInstaller_KB3021791_AMD64 and this installer do not require
fw 4,0 .....
thanx
Falcon

Hi,
DPM 2012 R2 requires at least .NET Framework 4.0 and .NET Framework 4.0 works with Exchange 2010 SP3.
For more detailed information, please refer to the articles below:
Setup prerequisites
https://technet.microsoft.com/en-us/library/hh758058.aspx?f=255&MSPPError=-2147217396
Exchange Server Supportability Matrix
https://technet.microsoft.com/en-us/library/ff728623(v=exchg.150).aspx
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Bonjour for Windows no longer works after SP3 is installed

Bonjour for Windows was working fine until SP3 came out. Now I can see the printer and Bonjour goes through the motions to set it up, but I can't print to the printer.
The whole construct of "Printer.local" or "AirPortExpress.local" doesn't seem to work in a printer Port configuration any more.
I can ping the Printer.local or AirPortExpress.local in a command window, but the print spooler can't seem to send anything to the printer if the name.local construct is used in the port configuration.
If I replace the printer.local name in the port configuration with the IP address instead of the printer.local name, I can print fine. The only exception to this is printers hanging off of an AirPortExpress. I can't print to any printer that is attached to an Airport Express. Even if I setup a port to the IP address, I can't print to that printer.
Another user that had this problem uninstalled SP3, I'm contemplating that now.

I have Bonjour installed on my ThinkPad running WinXP. It can't see my LAN-connected HP printer. I don't even see an option to add a Bonjour printer.
( how do you add a Bonjour printer??
Nor can any of my Macs see the shared documents folder on the PC. They could before I upgraded to SP3. Sharing for that folder is turned on, of course
I removed the Bonjour component and reinstalled it. No diference.
I downloaded the latest Bonjour installer from Apple and installed that.
Turned firewall off. No difference.
The Windows Component Manager shows that the Bonjour service is running. I stopped and restarted the service. No joy.
The Windows Event Viewer shows that the Bonjour service is logging informational error messages ID=1 from time to time.

Audigty 2 and XP SP3 and 5.1 speakers

Ok, just a little info first. I have a Dell XPS Gen2 PC (2003), XP SP3 32bit, with a Dell supplied Audigty 2 card, ATI Video card 9600. I have finaly ended up get it working by cleaning all creative software form my PC and installing only the SBAX_WBUP2_LB_2_09_006.exe file.
That gave me one icon (Creative Audio Console) that i can adjust things in like speakers selection, EAX, CMSS, etc. But i have no way to adjust the 5. speakers, like the front center or the subwofer. Do i need to install any thing else or should i have installed something else first. Please help with this install question if you have figuired it out.
Now for my long story
Things were fine for years then after some windows update the volume would change to match the master volume in WPM if you used the seek bar in WMP0. If you then clicked on the WMP volume adjust it would go back to the scaled volume, this would happen over and over again and was annoying. So the fix was (per microsoft) to update the driver. After i updated the driver everything seem OK no more volume problem, BUT in time i learned i had a different problem with the newer drivers, static in the speakers at random times for no reason. Pop and clicks. Again very annoying
No mater what i tried, it was either the old drivers from the CD with the volume problem or the new driver with pop and clicks. So i came here to fine out what to do. All that you get here is a bunch of people like me with stories about how F$%^up this POS SB Software is and no one can tell you the correct order, files?or method to install drivers correctly today (2009), because it works differently for everyone and if you are lucky, you can get back to normal some how with a dri've cleaning and reinstall of your choice of a "guess" of what will work for you. The FQA's are a joke and NO one from Creative seems to have posted anything that i can find to help people know there are doing the install correctly. Some files are dri'ves only others inculde a console, none inculded the orginial software that was on the CD. Some driver will let you think that they will work with the software from the CD but that has never worked even on XP for any of the current drivers or the betas. Many of the updates required software be installed before you run them, BUT the software from the CD is not at a high enough revision for it to run. I have knocked my head on the wall to many times at this point and have no clue anymore. I am a PC GURU but not anymore.
After about 60 hours and close to 00 reboots, and many uninstalls and system cleanups, trying many different sets of files and such, it is clear that it would be cheaper to go buy a different sound card.
I can clean my system of all creative driver and software and install from the CD no problem except the volume problem in WMP and have many nice little apps that help me adjust my sound. If i then install any of the newest drivers i have no sound and almost all the apps from the CD no longer work.
If i install just the newer drivers without any CD software?they don't even work with my card and i have no speaker or volume control at all (all grayed out in control panel) and no creative icons in the strat menu.
I seem to remember that one time i installed all from the CD and then updated to the SBAX_WBUP2_LB_2_09_006.exe , and i still had sound, some of the CD apps still worked but some didnt BUT i had the pops and clicks problem. But the last time i tried it nothing worked.
Please post what files and in what order you installed you Audigty 2 software on your XP 32bit system
Message Edited by Rainey on 03-3-2009 08:08 PM

Re: Audigty 2 and XP SP3 and 5. speakersP Thank you so much, your link to Daniel's dirver pack was just what i was looking for. He should be working for Creative as that is just what has been missing. I did not know where to get all though apps and auto update did not show them to me either. This is better then what i had before.
Now time will tell if i get the static, pop and click problem with these but right now i love them.
I really think it sounds better then they every did.
Now we talking, cooking with gas and lisening to the Blues
Big Thanks to you and great big thanks to Daniel_K for the driver pack
Rainey
Message Edited by Rainey on 04-0-2009 05:44 PM

Interesting problem with RAID, Windows 2008 server, and Ubuntu

sooooo, i got the system working and linux loved it. just adored it.
however, Windows did not. Windwos 2008 server hard locks from time to time. i fianlly figured out that it had to do with the RAID 0 i was running, that didn't really succeed.
However, when i rebuilt the RAID and everything on it, it refuses to recognize the disk, sayign that windwos cannot determine if this drive has a valid system volume on it.
Ubuntu 9.04 server, however, just took it and made it work great.
I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable. Then i went back and redid the raid, and it did the original error.
I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk. While it installed fine, it gave me an IRQL_not_less_than_or_equal error. It boots in safe mode, but no where else. I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate. I went back to ubuntu, this time the desktop/workstation versions, and i am doing an alternate install with RAID...much to my disappointment becuase now i will have to use VirtualBox to isntall windows...and if that fails, i'll be really pissed.
My settings are as follows:
SATA Controller 0-5 enabled
NVRAID- enabled
PCI BUS SATA- Option ROM Enabled, Master Enabled, and 0040h latency
MAC LAN- same as above
MAC LAN1- has master disabled, but the other stuff is the same
Serial port A is on AUTO, B is disabled, and floppy is disabled.
Option Rom is PFA relocation.
Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy. I just want to fix it
lastly, my LSI PCI-E scsi adapter is not being seen at ALL.
thanks guys.

Quote
Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy. I just want to fix it
lastly, my LSI PCI-E scsi adapter is not being seen at ALL.
Turn off onboard raid ctrl 1st. There are conflicting.
Quote
I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable.
Known issue, partition mess:
http://www.google.bg/search?hl=bg&ei=W-l3Sq_4NMbdsgbHnKmmBQ&sa=X&oi=spell&resnum=0&ct=result&cd=1&q=windows+cannot+determine+if+this+drive+has+a+valid+system+volume+on+it.&spell=1
Quote
I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk. While it installed fine, it gave me an IRQL_not_less_than_or_equal error. It boots in safe mode, but no where else. I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate.
What's the BSOD error? Are you using XP installation disk with included SP3?

Cannot install windows xp home edition w/sp3 into my mac pro mac os 10.6.2

cannot install windows xp home edition w/sp3 into my mac pro mac os 10.6.2. I followed the instructions step by step but it does let me install if fully when asks me to fully install it says it cannot where to install.

Hi,
how much diskspace did you assign to the Windows partition ?
And did you do the reformating of the WIndows partition as described on pages 8-10 of the BootCamp Installation Guide ?
In your first post you mentioned 'fully install' twice. Any chance that the XP disc you use is an Upgrade disc and not a full retail/OEM one ?
Check with the label on the disc because such XP upgrade disc are not useable with BootCamp.
Regards
Stefan

Mac os 10.6.8 cannot login to OES2 sp3

i'm having issues logging into a clean install of OES2 SP3 Linux SLES10 sp4 server here's my log file:
Feb 20 03:23:31 Server-1 afptcpd[4407]: Created session: 10 <0x82afc38>, Socket: 60, Total sessions: 2
Feb 20 03:23:31 Server-1 afptcpd[4407]: Closing session: 10 <0x82afc38>, Socket: 60, Pending requests: 0
Feb 20 03:23:31 Server-1 afptcpd[4407]: Created session: 11 <0x82afc38>, Socket: 60, Total sessions: 2
Feb 20 03:23:31 Server-1 afptcpd[4407]: Closing session: 11 <0x82afc38>, Socket: 60, Pending requests: 0
Feb 20 03:23:41 Server-1 afptcpd[4407]: Created session: 12 <0x82afc38>, Socket: 60, Total sessions: 2
Feb 20 03:23:41 Server-1 afptcpd[4407]: [debug] LDAP user name: cn=horchemg,ou=springfield,o=missouri
Feb 20 03:23:41 Server-1 afptcpd[4407]: [error] Failed to get volume key for - INFO:\
Feb 20 03:23:41 Server-1 afptcpd[4407]: [error] Failed to get volume key for - WEBBACKUP:\
Feb 20 03:23:41 Server-1 afptcpd[4407]: [error] Failed to get volume key for - HORCHEMG:\
Feb 20 03:23:41 Server-1 afptcpd[4407]: [error] Failed to get volume key for - INFO:\
Feb 20 03:23:41 Server-1 afptcpd[4407]: [error] Failed to get volume key for - WEBBACKUP:\
Feb 20 03:23:41 Server-1 afptcpd[4407]: [error] Failed to get volume key for - HORCHEMG:\
Feb 20 03:23:42 Server-1 afptcpd[4407]: Closing session: 12 <0x82afc38>, Socket: 60, Pending requests: 0

On 21/02/2012 23:16, ataubman wrote:
> Also, has OES been patched up? You need at least the November 2011
> patches to get AFP to work with 10.6.8 , IIRC.
I think you're getting your Mac OS X versions mixed up as Snow Leopard
(10.6.x) was supported from the beginning with AFP in OES2 SP2 and
later. See
http://www.novell.com/products/opene...owleopard.html
It's OS X Lion (10.7.x) that requires the November 2011 (and earlier)
patches for AFP in OES2 SP3 but it is supported from beginning with OES11.
HTH.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Migrate NSS volume data from OES2-SP1 to OES2-SP3 server fails

Hello forums
I have a senario where we want to use miggui to migrate all files/folder
and trustees, to e new server using miggui.
When we try to migrate from the existing "VOL" from the old OES2-SP1
server, we get an error on the miggui log running on the new OES2-SP3
server like this:
ERROR - FILESYSTEM:migfiles:Error: nbackup: (libtsafs.so 6.50.0 269) No
data sets can be found or the resource is not available.
In the miggui the Volumes can be dragged and dropped fine.
I do not by not know the old OES2-SP1's patch level, nor the OES2-SP3's
at this time.
Any ideas of what causes this error?
- Michael

Have you looked at this?
Troubleshooting data migration issues with miggui
I'd check and maybe see if the sms/tsa code is working properly on the OES2 SP1 server.

Windows Presentation Foundation AND BO DESKI

Hello!
Could you help us anybody.
We faced with problem when we created some project used Windows Presentation Foundation (WPF is a graphical subsystem for rendering user interfaces in Windows-based applications) and try to open our application and BO DeskI application simultaneously. The result: when we try to close BO DESKI this application abnormal closed..
We create test project used Windows Presentation Foundation which include only 2 standard control. And this test very simple application can not work correct with BO DeskI. If need I ready to send Visual Studio 2008 test project.
We tested this behaviour with BO XI DESKI Release 3.x SP3
Best regards
Andrey

That's interesting - thanks for the greater details.
It's helpful to rule out possible connections between your application and DeskI.
You might want to open a support case with SAP, if you need more interactive assistance. It'll be opened with the DeskI support team, since you're not using any of the SDKs.
But you may want to run Process Monitor (a tool found on Microsoft's site) to see if there's any file or registry access issues.
Another useful tool is [modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip], that takes a snapshot of all dlls loaded by a process - to see if there's anything in common between your application and DeskI, and to see if DeskI loads different dlls when your application is running.
Sincerely,
Ted Ueda

OES2 SP3 DNS/DHCP Console

Just a quick note that currently, the latest DNS/DHCP Console isn't
available for download on Novell's site. You have to get it off of your
OES2 SP3 server instead.
http://servername/welcome/client-software.html
Then you can follow TID 7006450 to configure it so you can view leases.
-Mike

On 25/02/2011 21:35, TitanXV wrote:
> It will only be available if the novell-dnsdhcp-javaconsole rpm is
> installed, and you can also grab it from the directory at
> /srv/www/novell/clients/dnsdhcp
If you do not have the novell-dnsdhcp-javaconsole RPM installed but do
have access to the OES2 SP3 media (and don't want to install DNS/DHCP on
a server just to get the latest JavaConsole) then on a Linux box you can
extract the latest code via:
rpm2cpio /path/to/novell-dnsdhcp-javaconsole-2.0.1-0.33.<arch>.rpm |
cpio -idmv
(where <arch> is i586 or x86_64 depending on 32- or 64-bit - note same
files included in both)
You can then take the relevant DNSDHCP_SA.zip file and use it to install
the JavaConsole on your admin workstation(s).
HTH.
Simon
Novell Knowledge Partner (NKP)
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Windows 8.1 and OES2 SP3

Similar Messages

Maybe you are looking for