Windows 8.1 and officejet 6110xi - Will not print but scans okay?

Today Jan 5th, 2014 installed Windows 8.1 on my dell desktop.
Now the HP officejet 6110xi will not print.
The scan mode seems to work.
I have tried all of the HP work-a-rounds but no luck!

Hi kmwenman,
Is this issue happening on all 4 machine that you have installed the Officejet 8620 on?
Please download and install the HP Print and Scan Doctor and let me know the outcome of each test performed. Please run this on all of the computers the printer is installed on if the issue is occurring.
You will see a wrench, a yellow exclamation mark, a red X, or a check mark next each tested item.
Click here to download and run the utility > HP Print and Scan Doctor
Is the printer connected directly to a wall outlet or a surge protector? (It is best to connect directly to the wall)
Do you have any other HP Printers installed on these computers? If so, do you still have the printer(s)?
Is this an HP laptop or a different brand?
Are all the computers running 8.1?
I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

OFFICEJET 4622 WILL NOT PRINT WIRELESSLY AFTER MULTIPLE TIME TRING TO INSTALL mutiple times

My printer will not print wirelessly. I see that it is installed and the firewalls are turned off but it will not print

Hello phdavid53,
Welcome to the HP Forums!
I understand your Officejet 4622 will not print wireless. I will do my best to assist you! First, I would like to ask you a couple of questions to clarify: When you installed this printer on your computer, were you able to print a document? Did the installation state it had a successful wireless connection?
I would recommend following this entire HP document on Printer Does Not Maintain Wireless Connection.
What is your operating system on your computer? Windows or Mac?
If you were never able to install this printer over a wireless connection through the software, then please follow this HP document on 'Unable to Find Printer' Error Message Displays on the Computer During a Wireless Network Installati.... I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

HP Officejet 4630 Will Not Print, despite empty spool

I can not get my printer to print from my laptop, nor my desktop. The print job goes to the printing que and shows it "printing", then "0" documents left to print. Where is it printing? Not at my printer, that's for sure! I have uninstalled the printers (in the 'printers and devices') and reinstalled via usb. I have rebooted the printer (unplugged, waited, plugged back in), rebooted my computers, and rebooted the network. I can not print from the network, nor via usb. I ran the troublshooting printer wizard, still nothing. I'm still running Windows 8.1. Help? -Lyons

Hi cjones87,
Welcome to the HP Forums! I understand that your HP Officejet 4630, will not print wireless to your laptop. I am happy to help you with this wireless issue! I have some questions for you:
What Operating System are you using? Windows or Mac? What version?
Is the power cable plugged into a surge protector or directly to the wall outlet? Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
Is your printer's firmware up-to-date? Getting the Latest Firmware and Printer Updates.
In the meantime, try printing a Network Configuration Page. Printing a Network Configuration Page. Look for an IP Address, place it into a browser's address bar, and see if it can bring up the Embedded Web Server.
Also if you are using Windows, please try our HP Print and Scan Doctor, and let me know what happens.
Hope to hear back from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

My printer will not print in black ,i replaced the ink and now it will not print in black ink

my printer will not print in black ,i replaced the ink and now it will not print in black ink

Please read this post then provide some details. What printer model? What operating system? Are there any error messages on the printer or computer screen?
Is your printer still in warranty? You can check with HP's warranty tool here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Have a Canon MX860 and the magenta will not print after several deep cleanings

Have a Canon MX860 and the magenta will not print after several deep cleanings

Hello allenaeifert.
Unfortunately, if the issue persists after deep cleanings have been performed, we would have to advise that you contact our support group at 1-800-OKCANON for additional assistance with this issue.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Hi my iPod touch gen 4 has stopped working properly and App Store will not load but Internet will, also you tube also won't load. Any ideas?

Hi my iPod touch gen 4 has stopped working properly and App Store will not load but Internet will, also you tube also won't load. Any ideas? I should probaly also add that I have also recently tried to download a screen recorder from safari and a message keeps popping up and saying that it can't verify server, even for this website

Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Files cannot be downloaded from Safari on an iPod touch.

I just switched iphones but my app store and my itunes will not work but i can make calls and texts

i just switched iphones but my app store and my itunes will not work but i can make calls and texts

Hi there. How were you able to solve it? I have a one year subscription to EW and I was able to receive a couple of issues. But now, I cannot download the new issue anymore. Please help.
Thanks.

My I pad will not print, but other I pad prints fine on same network

MY I pad will not print, but other I pad works fine on same network

Check the printer queue on the iPad by opening the multitasking bar. If the Airprint icon is there, open it to see if a job is pending.

Officejet Pro 8600 - Macbook Pro and Macbook Air will not print

Products:
HP Officejet Pro 8600
Macbook Pro (Mac OS X, Version 10.7.5)
Macbook Air (OS X, Version 10.8.2)
Question:
Why did my Macs initially print fine, but now will not print at all?
Full Story:
I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
The HP Officejet 8600 was added to my network about 2 months ago.
I added a Macbook Pro and a Macbook Air about 3 weeks ago. Both Macs printed just fine for about a week. Then suddenly they stopped. I spent about 2 hours on the phone with HP Service, and they finally said it must be my router. So I called Netgear. Netgear was useless! They wanted me to agree to charges for services before they would even discuss the issue.
Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600. The PCs print fine.
The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
Please help, I appreciate any support.
As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
Thank you,
This question was solved.
View Solution.

Hi,
More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
First try unplugging the router for 30 seconds.
Plug it back to the power and wait for 2-3 minutes.
Turn the HP printer Off and back On, then check for any difference.
If the same persists, try changing your router configuration as following
Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
Click the Advanced tab.
Click the Setup option from the menu, then click on WAN Setup.
Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
Click the LAN Setup on the same Setup menu.
Set the RIP Version as RIP-2 and Apply the changes.
Reboot your router and then check for any change.
I hope you may find that information useful, you may also use the user guide below for further information:
http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Elements and PDF's will not print to my HP officejet 6500

when i got the printer, it printed from adobe programs, then after a while it stopped printing, just going to the fax option, have spoken with HP and downloaded up to date drivers, and it prints from all other programmes with no trouble, just still will not print from adobe programmes ????!!!!???

xqzdust wrote:
I can't change the name in devices and printers. I can highlight it but that's all. Is there a trick I don't know of that allows you to change or alter the name?
Open Devices and Printers.
Right-click on the icon for the printer and select "Printer properties".
Click the "Change Properties" button on the lower left of the dialog.
Enter the Administrator's password when prompted.
On the "General" tab in the next dialog, you can change the name.
From that last dialog, you might want to click the "Preferences" button and see if you can change the default behaviour to print instead of fax.
Ken

OfficeJet 4500 will not print two sided over network

I'm running on Windows 7 with an OfficeJet 4500 G510n-z over WiFi. Printer works great except that it will not print two sided. We've used a non-WiFi 4500 to print two sided before. With the new printer the first pages print and the pop-up shows on the laptop (prompt to flip paper over) but nothing happens. The second pages never print.
I've run all of the HP print and network diagnostics. Everything appears to be OK.

The solution below was found on the sticky post at the top of this board "Fixes and Workarounds from HP"
I think the patch below only applies if you have the original printer software installed, I assume this issue was fixed in later versions of the printer software, Read the patch information carefully.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-69847-2&lc=en&dlc=en&cc=us&...
This Print Driver Update contains improvements for issues related to the following applications and/or print functionality:
     Microsoft Office 2007
     Duplex printing via network
     Printing from Intuit applications
     Print margin accuracy
     Thai language font

Officejet 4500 will not print from internet.

Printer will only print e-mails, will not print anything from internet. "Unspecified error, Line 2107, Char1, Code0 res://ieframe.dll/preview.js" appears when ever I try to print from internet.

The issue is caused when Windows creates the printer profile in the control panel that it doesn't correctly create it with the drivers.
We're not going to completely uninstall all the HP software, instead we're going to remove the corrupt Windows printer profile and reinstall it. Total time for this on an average computer is about 5-10 minutes to completely repair (including reboot).
1) Navigate to Start Menu > Devices and Printers or Start Menu > Control Panel > Printers
2) Select each printer profile for the printer with an issue, then select remove device/printer.
3) Reboot
4) Navigate to Start Menu > All Programs > HP > insert model # here > Add Printer (or Setup Wizard)
5) Follow the setup prompts to reinstall the printer profile and it recreates the Windows printer.
6) Test by printing google.com (uses very little ink when the test page comes out).
Let me know if you have any questions or issues.
Thanks,
Dan
I work for an internation tech company and personally perform thousands of computer repairs a year. I'm based out of the US working for a US company, and have been working on computers for over 13 years.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

My MX922 needed some cartridges changed which I did, and now it will not print. The paper goes thru

My year sold MX922 is about a year old and no trouble until today. I needed to change some cartridges, which I did. They are are full but when I print the paper goes thru and sounds like it is printing but comes out blank. I cleaned the heads and printed a test. The 8 color bars and grid at top came out perfectly. Why can't I all of a sudden not be able to print anything from my computer? I have a Mac 10.7.5.

Hi Artist85,
To resolve this issue, it is recommended that the PIXMA MX922 is reinstalled. Please follow the steps below to uninstall the printer driver:
1. Double-click the Mac HD.
2. Double-click the Library folder. The default behavior of Lion is to hide your user Library folder. To get to it Option-click the Go Menu in the Finder and choose Library.
3. Double-click the Printers folder.
4. Move the Canon folder to Trash. Note: If you have any other Canon printers installed, they will need to be reinstalled as well.
5. Open the hard disk icon again and double-click the Library folder.
6. Double-click the Receipts folder.
7. Move any files related to the PIXMA MX922 to the Trash.
Please use the following steps to download the software for your unit from Canon's web site:
1. Visit Canon's website at: http://www.usa.canon.com/cusa/support/consumer
2. Type PIXMA MX922 in the "Enter Your Model Name" box and click GO.
3. On the Support page for your unit, click the 'Drivers & Software' link in the middle of the page.
4. Under Recommended For You, please click on the MX920 series Mini Master Setup.
5. If you agree, please select the checkbox next to "I have read and agree to the terms of the Disclaimer and wish to continue with the download".
6. Click on the Download button.
7. A File Download box should appear and the file will be saved automatically.
8. Once the download is complete, close all windows.
9. Double click [mms_-mac-mx920-1_0-mcd.dmg] to install your PIXMA MX922.
Files will extract, follow the prompts to complete installation.
Once reinstalled, please attempt to print.
If you continue to have difficulties, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

ICal and Address book will not print using Snow Leopard

I have had several issues resulting in my having to re-install Snow Leopard several times. Currently all the issues are resolved, but now I have a new issue. The printer and PDF functions will not work. I dread having to reinstall Snow Leopard AGAIN. What is the deal?

This issue was resolved, thanks to a call to Apple Care support. Simply uninstalling and then reinstalling the printer driver fixed the problem. This may be necessary after another printer driver update.

HP Officejet j4680 will not print in black

Went on vacation, returned and black ink won't print. Changed cartridge to new one, did not help. Deleted printer and reinstalled, still will not prink black ink.

Hi tamif,
Please follow the steps given below and this should resolve the issue.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01346640&lc=en&product=3692888&tmp...
Regards
Aneesh
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Windows 8.1 and officejet 6110xi - Will not print but scans okay?

Similar Messages

Maybe you are looking for