Windows 8.1 Applications Do Not Work

The Windows 8.1 apps stopped working. I do not know what steps to take.
Advise?

Hi:
This is the only thing that I can think of that will work...see if manually installing the Vista 64 bit driver works on W8.
Run this driver. If it installs automatically, great. If not...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-65991-1&cc=us&dlc=en&lc=en&...
Go to the device manager and click on the network controller needing drivers.
Click on the driver tab. Click on Update Driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file.
That folder will be located in C:\SWSetup\sp34931. Make sure the Include Subfolders box is checked and see if the driver installs that way.

Similar Messages

Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP.

Lately, I've been getting a blue screen in the midst of working and have to do a cold reboot to end it. Seems to happen when I'm closing windows or quitting applications. Not always, but sporadically. What causes this? I'm using 10.6.8 on early 2011 MBP. Thanks for any help/advice!

You have 10.6 on that machine, I suggest you stick with it for performance, third party hardware and software reasons as long as possible.
Consider 10.8 (not 10.7) when it's released, because 10.7 and 10.8 will require a new investment in software and newer third party hardware as it requires newer drivers the old machines won't have. (forced upgrade because of software, really nice of them)
http://roaringapps.com/apps:table
Far as your Safari problem do these things until it's resolved:
1: Software Update fully under the Apple menu.
2: Check the status of your plug-ins and update (works for all browsers) also install Firefox and see if your problems continue. You should always have at least two browsers on the machine just in case one fails.
https://www.mozilla.org/en-US/plugincheck/
Flash install instructions/problem resolution here if you need it.
How to install Flash, fix problems
3: Install Safari again from Apple's web site
https://www.apple.com/safari/
4: Run through this list of fixes, stopping with #16 and report back before doing #17
Step by Step to fix your Mac

MY WHATSAPP HAUTELOOK FACEBOOK APPLICATIONS ARE NOT WORKING WITH THE NEW UPDATE iOS 7 ITS DRIVING ME CRAZY! HOW CAN I FIX IT?

I DOWNLOADED THE NEW UPDATED VERSION FOR THE IPHONE !!!
AND MY APPLICATIONS ARE NOT WORKING AT ALL
WHENEVER I ENTER TO WHATSAPP A MESSAGE POPS UP FROM NOWHERE SAYING SOMETHING ABOOUT PUSH UP NOTIFICATION!!
AND THAT I SHOULD CONNECT IT TO ITUNES, THEN I CONNECT IT TO ITUNES AND ITUNES IS NOT LETTING ME SIGN IN WITH MY APPLE ID ITUNES IS NOT WORKING/!!!
ALSO WHENEVER I OPEN HAUTELOOK APP ON THE IPHONE IS FREEZING MY PHONE WITH THE PUSH UP NOTIFICATION WINDOW, AND I CLICK OK AND IT STILL APPEARS OVER AND OVER AGAIN
PLZ HELP ME!!!!!!!!!!!!!!!!!!!!!

If you do not have enough space, then you would have to free up more space.
You can also update via itunes on your computer.

Application is not working when changing of oracle server domain name

Hi friends
We decided to change oracle server domain name due to some reason .. we changed the domain name but application running on the other server cannot connect to this domain i don't know whats the problem . I change the enterprise manager ( emca -config dbcontrol db -repos recreate_) according to the new domain but some of the future not working like date,etc. can anyone help me how to rectify it plz.

Mohd khalid wrote:
Hi friends
We decided to change oracle server domain name due to some reason .. we changed the domain name but application running on the other server cannot connect to this domain i don't know whats the problem . I change the enterprise manager ( emca -config dbcontrol db -repos recreate_) according to the new domain but some of the future not working like date,etc. can anyone help me how to rectify it plz.I am really confused that what's not working? What I have understood is that you recreated the EM repository. So where does "some of the future not working like date,etc." come into it? Are you checking date from EM ? Which application is not working, your application or EM or both or somethingn else? Tell us the complete version, error information and also post the output of
emctl status dbconsoleHTH
Aman....

Application Toolbar Not Working Properly. Help!

I'm having an issue with my Mac. The toolbars and other areas of each window in each program are not working properly. There is a bunch of random apples in place of certain buttons. Its hard to explain exactly what is going on so I've attached a couple screen shots of what I'm talking about. Does anyone know whats going on or how to go back to the default settings? I'm using Mac OS X 10.7.2 Any help would be greatly appreciated.

Application is not working in Enterprise Portal (Access Denied)

Hi,
I have created one application..........This application contains one DropDownByKey element whenever i run this application all the material numbers are automatically populated from R/3....... once i selected material number all the fields related to that material number are displyed in my view..... It is working fine in my NWDS(WebDynpro).....
I have integrated this application into Enterprise Portal their i am not getting any data into DropDownList box from R/3.... when i run the application i am getting "ACESS DENIED" error ............
But i have another applicaton(FlightList) which is already integrated into Enterprise Portal..... its working fine......This is also accessing data from R/3.... but its working......
The material application is not working........
Please Help Me.....
Thanks & Regards
Ravi Shankar B
<b></b>

Hi,
How have you defined the property "WAS host" for the portal system that you have created for the back-end?
You might get this error if the way you have defined this WAS host property and the way you are calling the portal are different. For example, if your WAS host property is "<hostname>:<portnumber>" and you are calling your portal as "localhost:<portnumber>", then you will get this error.
Also are you connecting to your portal using the fully qualified domain name? Don't call the portal simply as
<i>http://<host>:<port>/irj</i> but call it as http://<host>.<domain>:<port>/irj.
Regards,
Satyajit.

Application is not working due to memory issue

Hi Friesnds,
Kindly help me regarding settings in java. Scenario is like that. I have one server having two jboss versions (jboss-4.2.3 GA and jboss- 3.2.6). Each having java memory (JVM settings) 1 GB. The total memory of that server is 3 GB.
Problem is that every two days my application is not working due to memory issue. Once i freed the memory (through run the commands - (1). sync
(2). echo 3 > /proc/sys/vm/drop_caches
Application works fine.
I heared that the above command (echo 3 > /proc/sys/vm/drop_caches) can't run frequently because of server crash.
Kindly help me regarding this issue and provide the resolution.
Let me know if you need more information from my side.
Thanks
Ashish Shukla

All of the above. I tested on 4 different networks and had no luck, I also had friends test my network and the other networks with their iPhones and all had no issues using FaceTime.
Also after I wiped my phone (erased all content and settings) I was able to successfully initiate a FaceTime call with no changes to my network and was also able to initiate another call when connected to another previously tested network that didn't work before. Once I restored from backup though, FaceTime stopped working again.
I did find this discussion: https://discussions.apple.com/thread/5163024?start=0&tstart=0
and tried the suggestions found there too. That discussion describes my issue I am having as well.

Application loader not working on blackberry curve 8310

Hi all,
I have some problem with my 8310. I want to install a asian langague, but application loader not working. I have a error message :
"The blackberry desktop software does not have
Blackberry device software for the device that
you have connected to the computer. Contact
your wireless service provider or system administrator"
blackberry desktop manager version 4.2.2.14
blackberry device manager version 4.2.2.10
application loader version 4.2.2.16
What is the good package to install ?
Thanks in advance.

hello, you have a 8310. You must use an OS for the exact model. Using one for 8300 or 8330 will not work.
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Reopen All Windows from Last Session is not working

The option Reopen All Windows from Last Session is not working, is there any other way to recover the tabs from my last session?
Last night I fell asleep and my friend shut down my laptop.
When I woke up in the morning I couldn't restore my last session which had several tabs opened for my research.
I don't know the exact date when I found them, so I haven't been able to find them in History either.
I've looked around on the internet, but haven't been able to find anything that helped me out.
Hope you can help me! Thanks.

Restart your Mac.
Check the box for: Reopen windows when logging back in
Then check History > Reopen Windows from Last Session

Application does not work on firefox 3.5

If the application is not working in mozilla firefox 3.5 then we are not able to test it in any other browser through this tool.
What should be the fix for this issue

Hi Shilpa,
Can you please provide more details about your configuration and the symptoms of what is not working for you?
What OS are you using?
What version of Flash Player do you have installed? (You can find out here: http://kb2.adobe.com/cps/155/tn_15507.html )
Are you using Firebug and the BrowserLab for Firebug add-on, or are you just using BrowserLab standalone?
Does BrowserLab work in any other browser for you such as IE or Safari?
What are the exact steps you are taking and what do you see that you say BrowserLab is not working for you?
Mark

MAM application is not working for some users

Hi All,
Tha MAM application is not working for some users.Different users have different workcenters other than that I dont see any other change. When I run MAM30_090_GETLIST in the backend I can see the no of customized users.But I cant see same no of users in the MEREP_207 table for the Syncbo MAM30_090 and strcture id TOP in the middleware. There is a data when I checked under worklist monitor for that user. But neither the MAM application nor MAM data is downloading to that device.
If I use different user on the same device I can see the MAM application and MAM data.
What could be the wrong in this case. Any help would be highly appreciated.
Mobile Client:MI 70 SP 15 Patch 0 Build 200802280918
Middleware:SAP NetWeaver 2004s with Patch leve 15
Backend:SAP ECC 6.0
Application:MAM 3.0
Thanks and Regards,
Ameer.

Hi,
from your description the source of your issue is quite obvious: some of the MAM users configured in spro are not configured properly.
For T01 SyncBos the number of TOP records in merep_207 MUST be the same as number of headers returned by an appropriate getList FM in the backend.
You need to solve this before you can go any further.
Reason why a record is not recorded in MEREP_207 - getdetail failed for whatever reason. So execute MAM30_ML_getdetail for each of the users that is not replicated in the middleware and check if there are errors in RETURN table. If there is no error - one of the common reason for replication fail is when there are records in item tables that have duplicate primary keys.
Regards,
Larissa Limarova

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries)

I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!

1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install

TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Try this:
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

Windows Vista and iTunes does not work

First Time sorry for my bad English, I'm from Germany and my English is not the best.
I have the new Windows Vista but iTunes does not work good.
And I have to use it, to manage my music on my iPod.
When there will be a Vista compatibles Version of iTunes??
And when will come an 64-Bit Version?
Thanks for Help,
Karsten

iTunes running under VISTA does not recognize media burned by iTunes Backup (v7.0.2) from a non-Vista machine.
The original machine recognizes the media just fine, but the new VISTA machine does not recognize the dvd at all.
Anyone else having a problem with VISTA recognizing burnt media?

I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work. How can I download it to my laptop that has Windows 8?

I downloaded Elements 13 to my PC, but my PC has windows Vista and it does not work. How can I download it to my laptop that has Windows 8?

You can get it at this link and validate with your 24 digit serial number - click here for PSE downloads

Windows 8.1 Applications Do Not Work

Similar Messages

Maybe you are looking for