Windows 8.1 back to windows 7 with cbd_drive

Hi,
i recently updated my windows 7pro to windows 8.1 with the recovery disks .
Now i see that windows 8 is the worst operating system ever,
Luckely i made a recovery partition while still in windows 7, I thought.
I can get into the voor menu with the the windows 7 cbd_drive but right before the process going to start it gives the message " recovery failed"
Can the recovery tick still be used in wndows 8 or can i safely assume this laptop is ready for trash?
i have a thinkpad s540( wich i suggest u dont buy)

Before giving up all together, have you done the update to windows 8.1? For any computer without a touchscreen, windows 8 is nearly unusable, but Windows 8.1 is more usable. As for recovering back to windows 7, do you still have the recovery partition on the harddrive?
Hoov
Microsoft MVP - Consumer Security
SpywareHammer.com

Similar Messages

Installed windows 7 with Boot camp and now cannot get back to OS x x

Have installed Windows 7 with Boot Camp on a 20" 2006 iMac running X 6.8. Now cannot get back to original OS. Tried Snow Leopard in drive and holding c and various other keys at start up but still Windows. Any ideas?

Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the disk icon for OS X.
5. Click on the arrow button below the icon.

Getting (4280) in Windows 7 with a Sony Aw-Q170a Drive?

I finally fixed my burning error in Windows 7 with my Sony Aw-Q170a burner.
After being frustrated with 4280 message after another in iTunes, I tried burning in WMP and it was not finishing there as well.
After hours of searching on the web, I finally found a Firmware update for my drive. Then it all made sense. I had no prior burn errors with iTunes with the same drive in Vista, however Windows 7 and my Sony drive were not playing nice even though the device manager showed no error.
So this fix is for users of
Sony Aw-Q170a
Firmware: 1.72
Solution
Upgrade to Firmware Ver:1.74
Firmware Location:
http://www.opendrivers.com/driver/288727/sony-aw-q170a-(p-ata)-dvd-rw-firmware-1.74-free-download.html
Simply extract the file and launch the firmware update file, and it will verify all the information and ask if you want to flash. Follow all the instructions, (like removing dics, and closing all other programs) and it will ask you to power off.
Once you power cycle, and launch Windows 7 you will notice the OS will re-recognize the drive and say it installed correctly.
Now you can burn cd's again.
To verify simply right click on Computer from the Start menu, then select *Device Manager* on the left side below Control Panel Home.
Expand the *DVD/CD-Rom Drives* listing, and *Right Click* your *Sony Aw-Q170A drive*, then Select Properties.
Click on the Tab to the far right named Details, from the Property drop down list *Select Hardware Ids*.
The Value windows below should list 1.74 after your drive.

Would love to know if this is possible. Found forums dating back years asking exactly the same thing, no solutions. And I do not want to change my headset (Sennheiser MM-50), or use the onboard mic (which sounds like you are using your Mac in a wind tunnel once the fans kick in).

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

For unknown reasons iTunes will no longer open. I have an HP laptop running windows 7 with Kaspersky protection. It worked fine before but now won't open. I tried downloading the most recent up-date and it will still not open. Any suggestions?

thrillhousecody
Thanks for the reply with additional information.
Recent history for Premiere Elements points to the program having problems when more than 1 video card/graphics card is
being used by the computer on which Premiere Elements is running. This observation may seem contra indicated by the fact
that you say that the program did work well about 2 years ago in the same setup. But other factors may have set in with regard
to drivers, drivers versions, and driver conflicts. But this factor, does need to be ruled in or out.
Can you disable one or the other card to determine the impact of this on your problem?
But, of prime concern with regard to video card/graphics card is the use of a NVIDIA GeForce card with Premiere Elements 10.
Even if your NVIDIA GeForce were the only card, Premiere Elements 10 will not work properly unless the NVIDIA GeForce driver
version is rolled back to about May 2013. This may be one of the major factors here.
a. Device Manager/Display Adapters and find out Driver Version and Driver Date
b. Read the background information for the Premiere Elements 10/NVIDIA GeForce issue
ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
Also see the Announcement at the top of this forum regarding the matter - also with full details of the situation and how to fix with the
driver version roll back.
Please review and consider and then we can decide what next.
Thanks.
ATR
Add On...This NVIDIA GeForce situation is specific for Premiere Elements 10. You should not expect to see the problem for
later versions of Premiere Elements.

Extremely slow speeds on Windows Computers with 5th Generation AirPort Extreme

I just got a new refurbished AirPort Extreme 5th generation. Everything works great for all of my OS X devices and iOS Devices. I am getting my ISPs speeds when doing tests. The issue is when I am using Windows devices. My roommate has a desktop and a netbook and both are getting extremely slow speeds. Speeds like .07Mbps down. Does anyone have any idea what the issue might be?

You have no large file?? Really.. in the whole computer there is not a windows update file.. a backup file... a movie download file.. nothing.. ??
Anyway that is irrelevant.. the issue is wireless.
Download the latest drivers from the wireless manufacturer.
You will need to find out what wireless card is used and locate the correct download for that model.
On the Airport it is well worth doing the following tests.
1. Change the name to SMB standard.. short no spaces pure alphanumeric.
So if your wireless name is Fred Blog's Airport Extreme wireless
Plesae change it to AEwifi
2. Take off all security for a test.
3. Set channels.. I am guessing the computers are only using 2.4ghz, so set 11,6, 1 in that order.
No improvement.. just put the security back to WPA2 Personal with pure alphanumeric password..
Try and test new drivers and use no firewalls on the computer.. ensure that the computer is correctly set for home network.
Beyond that it is just incompatible.

Installing Windows 7 With Boot Camp on Mac Pro 3.1 w/GTX285 Video card

I have an Early 2008 Mac Pro 3.1 running the latest version of OS 10.6 with all updates. I have an nVidia GTX285 card installed in the Mac Pro that has been working fine for at least six months under OS 10.6 with Mac drivers downloaded from the nVidia web site and installed under OS 10.6. I replaced the ATi 2600XT video card with the nVidia GTX285 in order to have CUDA support in Premier Pro CS 5 and it works beautifully.
I now wish to install Windows 7 Professional 64 bit on this Mac Pro. I have never had any version of Windows installed on this Mac Pro. I am using Boot Camp assistant and a new full version of Windows 7 Professional 64-bit.
My question is do I need to remove the GTX 285 graphics card and replace it with my AT 2600XT before installing Windows 7? This would be a real pain to do because the two connectors to the motherboard are hard to get to. However, since Apple never used the GTX285 in any of its computers, I am worried that I will not have any video display when I go to try and install Windows 7 with Boot Cam assistant.
Please advise me whether removing the graphics card is necessary before installing Windows 7 with Boot Camp.
Thank you in advance for responding.
Tom

NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
How I would proceed -
Install Windows on its own drive.
Pull all the other drives.
Boot from Windows 7 Pro DVD
Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
The Mac Pro is as close as anything to a standard Wintel workstation.
Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
AV-Test.org Test Security-Software

How can I dual-boot Windows 7 with pre-Installed Windows 8.1

Hi, I have a Toshiba Satellite C55-B5362 with pre-installed Windows 8.1.
Make DualBoot Windows 7 and Windows 8.1 (both 64 bit), so, I don't know how to do this. If I set BIOS to CMOS and Install Windows 7 disabling Secureboot, I will lost all the pre-installed Windows 8.1 and the OEM licence.
and other question... if the upper is not possible. Okay. I will delete Windows 8.1 and Install Windows 7 permanently until Windows 10 is released, but.... If I have Windows 7 with CMOS BIOS and SecureBoot disabled, then supposing that I could have problems with Windows 7, and I want to upgrade to Windows 8.1 again, and supposing that I have a Recovery Partition backed in a USB drive, what can I do for re-install OEM Windows 8.1 and the licence.
Thanks.
Solved!
Go to Solution.

As I said above...
..you will need to install essentially all of them to make that laptop work as designed.
..install the TVAP before any other Toshiba utility.
-Jerry

Dual Booting Windows 7 with pre-installed Windows 8 Laptop

Hi All,
Just after a bit of advice, my girlfriend has recently got a new laptop and unfortunately she doesn't like it, despite me loving Windows 8.1.
She would like to try Windows 8 but is going back to Uni soon so would like Windows 7 as a back-up dual booted.
I've shrunk the partition and created a simple partition for Windows 7 but really unsure about Installing Windows 7 on a Windows 8 Laptop, it's an ASUS X550CA-XX417H. I've checked power shell with SecureBootUEFI and result is True.
What would be the best way to dual boot?
Cheers,
Ben

Hi Ben,
Here is a detailed guide for your reference:
How to Dual Boot Windows 8 with Windows 7
http://www.pagestart.com/win8dbwin701181301.html
This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on
these sites; therefore, Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there.
Hope this could be helpful.
Kate Li
TechNet Community Support

I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

Screenshots attached to email replies will not make it back to the forum; you need to login to the forum and post it in your topic using the camera icon in the editor.
Google Chrome is a problem:
if you use Chrome's own PDF viewer, the results are unpredictable.
if you use the Adobe Reader plugin with Chrome, it may reject (block) it if it is not the latest version. Reader 11.0.08 is the latest version for Windows XP, but Chrome may insist on the current version 11.0.10.
My suggestion; use a different browser!

I am unable to Install windows xp with recovery disks.

I have a Toshiba’s Satellite Pro S300-10J laptop Model#PSSB0E-02H00FDU. Some days back its operating system got corrupted. I have its recovery disks(windows Xp) and now I am trying to reinstall the windows by using recovery disks but unable to do so. Actually when I insert disk 1 it start installation process and then prompt for 2nd disk and when I insert 2nd disk it starts unpacking software image process. At the end it shows a pop up box with the following information.
Info:
                Done(Files:28339/28339 Folders: 2558/2558).
                Please remove the recovery medium!
                                                |OK|
As I remove the 2nd disk and press ok and then exit it goes shut down instead of rebooting. When I press power button to on it then it goes stuck on windows startup with a message of please wait .
Please support that how can I get rid of this situation and can restore operating system with recovery disk.

I made another attempt but nothing goes productive.
One thing is clear that the recovery disks are ok because a few months back I used same disks to refresh my notebook and did it without any error.
There might be a chance of bios setting because in my absence my sister and her friend tried to install windows and I doubt her friend made some changes in bios but she says that she didn’t made any change except boot priority and during installation got the error.
I have already rest the bios setting to default and in SATA CONTROLLER MODE I changed it from AHCI into IDE.
With recovery disks of XP Installation starts and after image loading it doesn’t restart just goes shut down and upon restarting just stop responding/hang up on startup.
I tried with another CD of XP and during installation when system restarts setup continues on ‘INSTALLING WINDOWS’ with the message that ‘Setup will complete in approximately 35 minutes ‘Installing devices’ and at this stage it hanged up. Finally it shows blue screen with an error like
Technical Information
STOP: 0X000000F4 (0X0000003,0X89936670,0X899367E4,0X805D1142)
Beginning dump of physical memory.
On several attempts the result remains same.
Need your valuable advice please..

Overheating while using Windows XP with Bootcamp

Hi,
I bought a MacBook Pro last September 2009. The MacBook Pro came with Leopard but I installed Snow Leopard a couple of weeks later.
I need to use some Windows-based programs so I am using Windows XP with Bootcamp. However, I notice a high overheating when using Windows on Bootcamp (especially on the left side of the keyboard). Until now, the system doesn't crash but the overheating is a big problem for typing. This problem does not appear while I work on Snow Leopard.
Please, I would appreciate any help. I installed "SMCFanControl" but it only works under OS X (where there is not the problem). It doesn't control the fan on Windows under Bootcamp. Also, for this, I installed "SpeedFan" but it doesn't recognize the fans.
Thanks in advance.

A little solution that has helped me.
install both
Notebook Hardware Control (NHC)
http://www.pbus-167.com/nhc/nhc.htm#anchor_download
Notebook Hardware Control has a Max Battery setting when you right click on it's icon in the notification section on the task bar (lower right). Make sure to apply this setting.
and as suggested by Kappy
Input Remapper
http://www.softpedia.com/get/System/OS-Enhancements/Input-Remapper.shtml
This program allows you to adjust your fan speed without having to restart from Mac OS. Which is nice because with SMC if you close your macbook while running XP it will turn the fans off. Therefore you have to restart in Mac OS to turn the fan speeds back up.
The combination of the two has kept my cpu in the 65c range while heavy gaming and 45c at idle.
I have tried a lot of the ridiculous things that have been mentioned in both this thread and others. This solution has been an incredible relief because I certainly didn't want to get up every so often to run to the freezer or play over the air conditioner for several hours. I hope you have as much luck as I did.
My Mac is a late 2009 Macbook pro and I'm running XP in bootcamp.
Message was edited by: ensigne

Hi. I use windows Xp with service pack 3. I have the latest itunes 11.1 installed in it. I am able to add music or apps to my library but not just videos. Please help.

Hi. I use windows Xp with service pack 3. I have the latest itunes 11.1 installed in it. I own ipad mini. I am able to add music or apps to my library but not just videos. I have already tried removing & reinstalling it. I also have tried with various formats like MPEG, MOV, MP4. Please help.

I already have what you ( ClayandLonnie ) have suggested with the preferences>Shareing Preferences set to share all.
I have tried turing it off, and then back on.
I have tried just sharing specific items and this still did not work.
I am going to try stepping back down to 11.04.4 as previously suggested by TheDarkCanuck when I get home tomorrow. (maybe saturday). I am just leary about having to recreate all my libraries and how long that might take. I have over 1.5 TB of Music and Video, that is why I would like to get it working in the current version.
Just because I don't have a Mac, it seems that this is not being taken as a real problem for the windows 7 users (maybe it is specific to 64bit). I may try the 32bit version to see if that fixes it first. Unless someone else has, and want to chime in.

UWL: headerless portal window launches with improper column justification

Hello,
We are running Portal 7.0, for our ECC 5.0 and SRM 4.0 production systems.
When managers execute an item from their Universal Worklist, such as an absence notification, a new headerless portal window is launched.
All of the viewable data should appear in the right column of the newly launched window.
However, the window launches with a display that hides 90% of the right column, and the only way to view the data is to drag the column line back to the left side.
Specifically,I think that it is tied to a column width property of the new headerless portal window; however, I am not sure where that can be edited from. I am looking at System Administration>System Configuration tab, and then Universal Worklist - Administration>Universal Worklist Configuration Content. I can view the XML content, but it is not clear which of the multiple "launchInNewWindow" lines is the one responsible for our viewing problem.
Any suggestions would be greatly appreciated!
Thank you,
Joyce

In case anyone else ever has this problem, here is the solution:
The problem was a bug that was fixed in the Basis Support Package SAPKB64018.

Installing Windows 7 with .exe file

Hello there.
I partitioned my HD to have at least 30 gigs for Windows, except it doesn't have the option to install with a .exe file.
I'm currently under the microsoft academic alliance and need to emulate windows in order to run a program made only in the windows environment. I downloaded Windows 7 from the MAA site but there seems to be no way to run a .exe during the BootCamp installation process.
So my question is: is there a way that I can install Windows 7 with BootCamp using the .exe download file?
Thank you for your time

NO.... he has a workstation, and not MBP, nor are "drivers already loaded."
How I would proceed -
Install Windows on its own drive.
Pull all the other drives.
Boot from Windows 7 Pro DVD
Forget Boot Camp Assistant, it doesn't do anything - unless you really want to install Windows on the SAME drive as Mac OS - not ideal and not what most of Mac Pro owners do.
Just insert your OS X DVD once Windows is up to date - helps to buy the SP1 OEM version $129.
Run Apple SETUP.exe (Boot Camp 3.0.x drivers) and update with ASU or manually to 3.2.
No you don't need to go back and use that ATI. And you dont' want to be in the situation of changing from ATI to Nvidia and all the hassle that adds. you are fine.
The Mac Pro is as close as anything to a standard Wintel workstation.
Add MS Security Essentials or KIS or whatever you favor. KIS2011 or NIS2011 are good, MSSE 2.0 is free and based on their enterprise product.
AV-Test.org Test Security-Software

Installing Windows 7 with Bootcamp question

Hey guys, I recently switched over from a PC to a Mac this year and wanted to install Windows 7 with Bootcamp so I could do some gaming every once and a while. I've read that I can't use the restore discs that I got with my ASUS to install Vista, so that's out of the question. I also have a Windows 7 upgrade disc that I used a while back to install Windows 7 on the ASUS. Will that upgrade disc work if the ASUS is restored? If not, will an OEM copy of Windows 7 be all I need? A retail copy of Windows 7 Home Edition is kind of steep to only be used part of the time.
Thanks in advance!

Well, "WHICH" Mac do you have?
Go to the Apple menu (upper left corner)/About This Mac/More Info and at the top (under Hardware content) it should say "Model name" and "Identifier". Then put it in your profile so you don't have to keep remembering to do it.:)
You might call/e-mail ASUS and ask if it can be used on another computer. Don't tell them it will be used on a Mac. Just tell them your thinking on building one from scratch.
If you have a "desktop" ASUS then you MIGHT be able to just switch over the HD after Upgrading it to 7, but I believe the ASUS, Dell, etc, setups are "matched" to the COMPUTER so it might not work. A retail full version of Window 7 will work. You might also try Microsoft and tell them the same thing, might be able to get another "Upgrade"?
I'm in the same boat, just play a few games on XP but want to get Windows 7, you have to spend $100 dollars more for "Pro" to get the "Windows XP Mode"! E-Bay does have it quite a bit cheaper then Microsoft sells it for.

Windows 8.1 back to windows 7 with cbd_drive

Similar Messages

Maybe you are looking for