Windows 8.1, BootCamp does not find the ISO image.

When I try to install Windows 8.1, BootCamp does not find the ISO image.
I purchased Windows 8.1 Pro, I downloaded the .exe requested file from a Windows computer, performed the steps recommended by Microsoft in order to create the ISO file saving it on a flash drive as well and, as a precaution, on a DVD too.
I performed the "Download the latest Windows Support Software from Apple" step directly into another flash drive and having it completed BootCamp displays the following message:
"The installer disc could not be found – Insert the Windows installer disc and wait a few seconds for the disc to be recognized. "
So happens that I have tried this using the DVD, pendrive and also copying the ISO file to the desktop and to the "Documents" folder as recommended in certain websites, but none of this has made the process go ahead. What can I do?
My equipment is a mid 2011 iMac running Mac OSX 10.10.1.

Dear Loner T,
thanks to my coworker, the solution was unpacking from that ISO file which I had recorded (according to the steps indicated by Microsoft), but now using Nero software (Windows) and then recording by the most common way in a new DVD. See the screen of the first DVD before unpacking:
This true saga only demonstrated that the generated ISO file as an option at the time of the Windows installation, is not for direct installation through BootCamp, and as a I could check, even for direct installation on a Windows PC. See the last DVD burned using Nero and again recorded:
The execution of BootCamp, was perfect
Thank you for attention to my problem!

Similar Messages

Windows 7 in bootcamp does not recognize the wifi and usb

i have just made the bootcamp with Win7. it does not recognize the wireless driver and the high resoltion screen.
plus every time i have set the right click of trackpad.
could any one help me in solving this issue?
is there any way to upgrade the bootcamp driver from 3.0 to 3.3 without passing through 3.1 and 3.2?

You might wan't to ask in the Boot Camp forum where the Boot Camp gurus hang out.
https://discussions.apple.com/community/windows_software/boot_camp
It sounds like you have not yet completed the Windows installation process by installing the Windows drivers.

Iphone and ipad does not find the airprint printer

After I upgraded my iphone and ipad I lost my airprint function. Ipad and Iphone does not find the airprinter. The printer is a HP Photosmart 5520, and it does work wireless with my Windows PC that is on the same nettwork.

In our case the Airprint printers could not be found after IOS upgraded to 7.1.2, all was fine before then. I have scoured the forums and many people have suffered the same problem. All the solutions given are aimed at a domestic network with just a Wireless router. They all involve restarting all the devices and rejoining the IOS devices to the wireless network. Some people have had to do it multiple times before they regained use of the printers.
In my case none of these work because I am talking about a business network with two wireless access points, several switches and a router. To prove it is the IPads I have installed Bonjour onto a Windows PC (Bonjour is the technology used by Airprint). This finds the printers perfectly so it is definitely something that was changed in the version of Bonjour on the IOS 7.1.2 that is causing all the problems.
I was hoping that Apple would release another upgrade to IOS to fix this problem but it has been several weeks so far and nothing has emerged.
So something that worked perfectly a few weeks ago is now dead in the water because of an update on the IPads!!!!!!!!

HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

hi
could you tell us what the other app is please

Software does not find the Database server

Hi all,
We are going to move database from old server MSSQL 2005 Express to the MSSQL 2008 R2 STD. For test I backuped DB from old server then restored at the new one. For some reason the software does not find the new server.
I checked everything as from the link described:
http://blogs.msdn.com/b/walzenbach/archive/2010/04/14/how-to-enable-remote-connections-in-sql-server-2008.aspx?Redirected=true
Also at the new server we have another production DB that is running without any issues...
System.Net.WebException: Unable to connect to the remote server ---> System.Net.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected
host has failed to respond 195.30.95.163:80
at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.InternalConnect(EndPoint remoteEP)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Int32 timeout, Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetRequestStream(TransportContext& context)
at System.Net.HttpWebRequest.GetRequestStream()
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at OptoWare.OrderEntry.OrderInterfaces.WebReferenceOWEdix.OWEdixService.OWEdix_GetStatus(String custID, String password, String countryCode)
at OptoWare.OrderEntry.OrderInterfaces.EdixInterface.b(Object A_0, DoWorkEventArgs A_1)
2014-03-31 16:54:58,924 [1] ERROR OptoWare.OrderEntry.Controls.Config.ServiceControl - Connetction to FI1-sv-prod014\mssqlserver failed.
System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured
to allow remote connections. (provider: SQL Network Interfaces, error: 25 - Connection string is not valid)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at OptoWare.OrderEntry.Controls.Config.ServiceControl.i()

It looks like the connection is getting refused because of your application configuration.
Refer similar thread
http://forums.asp.net/t/1180127.aspx?A+connection+attempt+failed+because+the+connected+party+did+not+properly+respond+after+a+period+of+time+or+established+connection+failed+because+connected+host+has+failed+to+respond+
-Prashanth

Please help! Safari does not start due to a plugin failure. How can I remove librooksbas.dylib. Without being able to open safari. Finder does not find the file.

Please help.
iSafari does not start up due to an error caused by plug in librooksbas.dylib.
How can I remove this plugin without opening safari. Finder does not find the file, nor any other plugin.
Eric

For future reference, Safari Plugins are kept in Macintosh HD> Library> Internet Plugins.
To unhide the Library folder, open up Terminal (just type"Terminal" into spotlight) and type:
chflags nohidden ~/Library

Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao.

After I updated OTA stopped taking charge and does not find the network.

Почему после обновления ОТА перестал брать зарядку и не находит сеть?????????????? z10 stl100-2
After I updated OTA stopped taking charge and does not find the network.
И такая же проблема на всех 10.3.1. прошивках, а на 10.3.0. такого нет и даже не знаю с чем это связано, Живу в Белоруссии,
And the same problem on all 10.3.1. firmware, and 10.3.0. such is not and do not even know what it is connected, I live in Belarus, help pls

Привет!
В общем вышла новая прощивка ОС 10.3.1.2558 для Blackberry z30 - она оффициальная только для з30, но я себе поставил на з10 и все норм. На форумах Крэкберри, ребята с такой же проблемой (нет сигнала, аккум не заряжается, камера не работает) исправили все эти ошибки установив данную прошивку.
Я вчера тоже поставил ее себе на телефон и все работает, вообще нет никаких проблем. Я устанавливал автолоадер.
В общем мне эта прошивка решила все проблемы и полноценно теперь пользуюсь 10.3.1
Удачи!

Publish to DVD says it completes, does not write the ISO file in version 13.

When I publish to DVD and select ISO it says it completes but it does not write the ISO file in version 13.

apsteinmetz
The DVD disc which is labelled 4.7 GB/120 minutes is in reality 4.38 GB. And the DVD disc which is labelled 8.5 GB/240 minutes is in reality 7.95 GB.
What version of Premiere Elements and on what computer operating system is it running? Can we assume 13/13.1 on Windows 8.1 64 bit?
What are you doing, a burn to disc DVD-VIDEO standard or widescreen on DVD disc or burn to disc AVCHD on DVD disc?
When you get to the burn dialog (and you have your disc in the burner tray), what does the Quality area of the burn dialog show for Space Required and Bitrate with and without a check mark next to "Fit Contents to Available Space"?
Or, can you do burn to Folder (4.7 GB) and/or burn to ISO Image (4.7 GB)? Are your successful burn to .iso files under 1 GB in file size?
Please quantitate "...shortening the timeline dramatically".
Thank you. Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

I have Lightroom 3.6 and it does not recognize the raw images from my Canon 7d mark II, suggestions?

I have Lightroom 3.6 and it does not recognize the raw images from my canon 7d mark II, suggestions, do I need to upgrade?

Yes, you need an upgrade for native support in Lightroom. You need version 5.70 or higher; current version is 5.71.
Alternatively, you could use the most recent DNG converter and convert the raw files to DNG files before importing into Lightroom.

How can I restore Windows 7 to Bootcamp partition - not reformat the entire hard drive?

Hello Apple (Mac) Community,
I originally posted this question over on answers.microsoft, but no help was forthcoming. Hope someone can help me with a problem that's (almost) making me nuts! I teach graphics to college students. In brief: I run Windows 7 Pro 64 on a Mac Pro tower, along with Snow Leopard (OSX). Windows is loaded on one partition of a 1TB drive. The other partition is a Mac backup. The Mac OS is on a different drive. Everything was going swimmingly with both OS, until recently. Unfortunately, the drive with Windows showed problems and I determined that the HD was either toast or needed a total reformat. My Mac data was all backed-up. Now I wanted to backup Windows so I can easily get back to the relatively happy point of my Windows 7 experience (drivers loaded, dual monitors all working, etc.). I did some online searching and the recommendation was to create a "system image" of the existing Windows 7 install by attaching an external drive, formatting that to NTFS and selecting "backup to image" in Windows. I did that and also took the opportunity to "create a backup disc" on a DVD. (Windows recommended). Next I rebooted back to Mac OS and completely reformatted the problem 1TB disc to a single partition, zero all data, just to see if it would actually reformat. It all worked! So far, so good. Next I used Bootcamp to create two partitions, one for Windows. I then restarted using the Win7 Pro (64) install disc, reformatted the Bootcamp disk to NTFS (as required) and installed Windows 7. After all that is completed and all working, I next try to use the restore from image function while booted in Windows. I'm instructed to restart from the Win install disc, which I do. Here's where things get difficult. When I try to choose restore from image, at that point the installer asks which drives to I want to exclude... but does not show partitions, only full HDs. I do not want to reformat the entire 1TB drive. I only want Windows on the 120gb Bootcamp partition (which is already formatted for Windows BTW). I spent a lot of time online reading through articles with users having the same frustration.
So here (at long last) is my question: How can I either restore Windows just to a Bootcamp partition... using "Windows System Image" or if that can't be done... can I somehow import all of the settings, etc. from the "image" (image is on external HD) into a fresh Win 7 install? So far the "backup disc" also seems useless. I can't even boot to Windows from it. BTW Apple folks: the only response on the MS side was that some "expert" simply posted links on how to install Windows and restore... not helpful with my particular problem of restoring to a partition.
Any help would be appreciated! Hopefully some help that even a Mac user / new Windows user could understand would be better! Thanks!
-melt

WinClone 3 is OS X and saves Windows image it makes for restore - that should work but you will have to try and you would need to make a new image unless it also works with a native Windows system restore image. It is now supported and has come a long way.
http://www.twocanoes.com/
Paragon Clone OS works and does disk-to-disk clone just like CCC you end up with two bootable drives. But does not work with your setup. It would let you clone and move your Windows install to an SSD or another disk drive though and be bootable.
During its clone process it checks for errors which is very helpful and lets you know - something CCC and others should adopt more of.
http://www.paragon-software.com/downloads/demo.html
I wish for our/my sake you had re-read and rewritten the long 'story' and broken it into a brief list of facts we needed.
OS X
Windows
Backup (though external is much safer) and you want bootable OS X clones as well as TimeMachine
https://support.apple.com/kb/HT1427
https://support.apple.com/kb/HT1553
There are a number of things to do like chkdsk and others as well as Windows DVD to do automatic system repairs and find out why.
AppleHFS - the abilty to mount and read HFS volumes can be notorious.
I would rearrange and redo your storage setup and how you use the 4-5 internal hard drive bays.

ITunes does not find the iTunes folder though it is there

Hi all,
I moved my Music folder on a separate HDD for space issues, and now my iTunes would not start saying that it cannot find the iTunes folder and it cannot create it.
I put the iTunes in several places, not just in My Music, so that it will find it, however it does not and refuses to start.
I am using Vista.
I tried deinstalling/reinstalling iTunes and it does the same thing.
I hate deinstalling it and going through the whole registry in order to delete all entries that contain "iTunes".
Thank you

Hold Shift then launch iTunes.
Select *Choose existing library* then select the _iTunes library.itl_ file in \My Music\iTunes\ folder you moved.

If I shake windows of VI's, does not run the code.

I have many VIs called from a VI and thus run in parallel, a VI has a DLL that allows me to communicate via CAN. If I minimize and maximize windows to be changing the VI's or I shake the window, the communication CAN be lost for a moment (And it breaks my comunication system).
I use windows XP.
Some solution? Is this normal?
Thanks

Felipevv wrote:
I need to constantly change VI's because I have multiple VI's with control panels
I try to explain again:
I want that the global variable does not change until you take for example 0.5 sec changed:
0s-> IN: TRUE, OUT: TRUE
0.1s-> IN: FALSE, OUT: TRUE
0.2s-> IN: TRUE, OUT: TRUE
0.3s-> IN: FALSE, OUT: TRUE
0.4s-> IN: FALSE, OUT: TRUE
0.5s-> IN: FALSE, OUT: TRUE
0.6s-> IN: FALSE, OUT: TRUE
0.7s-> IN: FALSE, OUT: FALSE
Thanks.
I don't understand how it would help with your CAN problem, but does this do what you want?
Attachments:
halfsec.vi ‏9 KB

PPOMA_CRM - System does not find the correct Organizational Unit

Dear Experts,
we have done the following:
1. We created a new Z-Field within table CRMD_ORDERADM_H with the Application Enhancement Tool. The name of the field is: ZZFLD000000.
2. The we changed the View-Cluster T77OMATTR and added the attribute ZZFLD00000 (Name Postal Code).
3. We added the attribute to the View in Component BT126H_APPT.
4. In PPOMA_CRM we added the Z-Attribute to the Organizational Unit 'A' with a number range from '08030' to '08035'.
5. Then we changed created a new Org. Determination Rule and assigned the new Determination Rule to a new Org. Data Profile which we assigned to the transaction type. We made a try and the determiantion rule is working!
The point is, when we create an activity the user puts the postal code (in this example '08032') into the created Z-Field and then we expect that the specific organizational unit 'A' will be assigned like Service Organization.
To solve the problem we put a breakpoint to all SET and GET Methods of the Attribute but the system is not stopping there. We missed something but we can not find really the problem.
Which method we have to redefine so that SAP CRM is looking at the new created Z-Field and is searching within the Organizational Structure for the correct Organizational Unit?
Best Regards
Oliver

Hi,
This is my idea, I don't check this.
But, I think it's have to work.
Pass guid to CRM_ORDER_READ, and get parameters.
After that, check where you can read postal code.
I think it's in lT_CUSTOMER_H
For example,
call function 'CRM_ORDER_READ'
    EXPORTING
      it_header_guid = ZGUID
    IMPORTING
      ZCUSTOMER_H        = lT_CUSTOMER_H
    EXCEPTIONS
        DOCUMENT_NOT_FOUND = 1
        ERROR_OCCURRED = 2
        DOCUMENT_LOCKED = 3
        NO_CHANGE_AUTHORITY = 4
        NO_DISPLAY_AUTHORITY = 5
        NO_CHANGE_ALLOWED = 6.

I moved my Mac and am trying to set things up again. The computer detected the wireless mouse immediately, but does not find the keyboard. What does "discoverable" mean? The keyboard is turned on. Don't know what else to do.

I have just moved and am setting up my Mac again. It immediately found the mouse but cannot seem to find the wireless keyboard. What does it mean to be discoverable? The keyboard is on with blinking green light, but the computer can't seem to find it. What do I do?

What does it mean to be discoverable?
Open System Preferences > Bluetooth
Make sure On and Discoverable are both selected.

Windows 8.1, BootCamp does not find the ISO image.

Similar Messages

Maybe you are looking for