Windows 8.1 bootcamp setup, now when rebooting I am getting permanent Grey Screen
I have Yosemite installed on MacBook Pro 2013, created bootcamp with 8.1 and installed with no issue.
Been using Windows 8.1 successfully for over a week. Needed some files from my OSX so used the bootcamp option in the taskbar to reboot to OSX and copied the necessary files to a ext hdd.
Now when I set reboot to WinOS (Bootcamp) I am stuck in permanent grey screen. What I can do to try to figure out what is wrong, as the partition is NTFS, Disk Utility does not work.
I can boot back to OSX with no issue, can't seem to get back to the WinOS.
I don't want to start all over again, took me 3 days to get all the software and configurations installed successfully...
Actually this may be another problem, originally I installed Win 7, once installed I upgraded to Win8.1, could this be an issue? It has been running successfully for 5 plus days??
Nevermind, I left it sitting there for 3 hours and it finally logged in? backed up the system and reboot and it came right back up???? So it is resolved.
Similar Messages
-
I'm getting a black/blank screen when trying to open a Pdf. off the internet. Can some one please tell me what to do to fix this? I just had my hard drive replaced and never had this problem before. Thank you
try downloading adobe acrobat reader and installing it......
-
Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?
assuming it is an optical mouse (no ball etc.) then there aren't any moving parts involve in the motion detection
so there's a faulty component or connection
from what you describe it could be just a loose/broken connection, so if you know someone familiar with electronics see if they can open it up and have a look -
I changed permission setting on main disk...took forever now when I bootup I get the chime...apple icon...fan noise...thats it...internal drive is broken...no Mac install disk..I have a windows XP desktop with installation disk..if I was to get external drive ...could I use windows XP styartup disk just to boot the "17"Powerbook-G4...have no intention of downloading XP on the Mac...just want to boot it up...or is there a way to boot the Mac from the XP desktop...cables...etc?
Hi Romko23, just pasted info from manual...PowerBook G4 "17" 5.3
Your PowerBook comes with a minimum of 512 megabytes (MB) of 533
MHz Double Data Rate (DDR2) Synchronous Dynamic Random-Access Memory
(SDRAM) installed. Both memory slots can accept an SDRAM module that meets the
following specifications:
 Double Data Rate Small Outline Dual Inline Memory Module (DDR SO-DIMM) format
 1.25 inch or smaller
 512 MB or 1 gigabyte (GB)
 200-pin
 PC2-4200 DDR2 533 MHz Type RAM
PS my keyboad is loose...I tighten the tiny screws...only...once ...tried all the key-strokes...Comand-option..P-R.....safe-mode... etc...Mac only reacted ...once...right after.. I tightend K-board >>C-OpT- P-R...mac chimed twice...the Apple icon in grey screen got smaller....now after trying ...keyboard .boot short cuts 10 times..nothing...it chimes ...grey screen....apple in window...fan noice ....thats it...do you think I need to tighten screws...again,
I actually think when I was changing permissions...on entire it was taking so ong...20 min...I just hit power,,shut it down...when it wasn't done...no patience.,...just thought of something ...sounds important...whern I resgisted on this site..I tried to use my Powrbook login name ..got message.... .. blocked...Secury problem....that has to be the problem..blocked..how do I unblock?
Message was edited by: CMK1 -
Hi guys.
I've had my MacBook Pro for 2 years now. Last night it suddenly kept glitching to a dark grey screen every now and then, then it would flash yellow / blue spots, and now it won't go past the grey screen even when I reboot it.
I don't think I can access my disk anymore as I've moved across countries since I've first gotten my laptop. it was working perfectly fine before it kept going to the dark grey screen with a little blue on the bottom.
If it helps, my camera light is still on, and it seems that my computer is working properly itself, but won't go past this grey screen.
I'm a college student and am really panicking about this - can anyone please tell me what to do?
Thank you & sorry for the long post.What operating system are you running on it? (iOS 5.1 is for iPhone, iPad...not a Mac).
-
iMac froze while surfing web last night (color pinwheel), I forced quit and now when rebooting the fan and chime come on, the monitor stays on grey and the apple sign is replaced by a stop sign and I can't get past this, is there self fix? Never backed up.
The computer (top / back of monitor) gets really hot within minutes.How old is the iMac?
With no backup, you have probably lost all your data.
Sounds like serious hardware problem for which you are going to have to take it to Apple for an estimate of repairs.
Allan -
Resetting Airport Extreme disabled my home network. Now when i attempt to get to internet with iPad, or iPhone, I see an Earthlink (ISP) window with message: The internet connection is currently in use by another computer (nun.nn.n.nn) Enter your DSL Account logon psassword to switch the internet connection to this computer. If I do that, other messages follow. I am usually able to switch connection, but can have only one device on internet at a time. Tried to correct problem using Airport Utility, but failed.
Unfortunately, there is mass confusion about whether a device might be a modem or a modem/router since the terms are mixed up all the time. Even though a device might have only one Ethernet port, it can still be a router.
If this is your "modem".......
http://reviews.cnet.com/routers/netopia-cayman-3341-router/4507-3319_7-30484785. html
It is not a modem.....it is a modem/router. If that is the case, then the AirPort Extreme is not the only router on your network....it is one of two routers, and it should be configured to operate in Bridge Mode.
Does this device appear to be your "modem"? -
Hi, I bought an iPad and was so impressed by Safari that I replaced Chrome with it on my Windows XP Toshiba laptop and now when I use Safari the icons on the screen continue to flicker until I come out of Safari. Is there a cure other than using a Mac
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
I am trying to install Windows 7 using Bootcamp Assistence 5.0 on a MacBook Pro Retina OSX 10.8.2, I went through all steps on Creatting the Windows 7.iso into a bootable USB Dirve 16GB I use a separate USB Drive 2 GB and download Windows Support Drivers Step 2 on bootcamp assistence. I run into the problem in step 3 when the computer reboot I just get a black screen the back display still on like I can still see the apple on the back lit up, but the screen is black and wont load the window installer, if i shut it down and bring it back up i get error saying IOS not found so then i have to shut it down, enter recovery and restart on osx partition, i can see that the bootcamp partition was created but cant load windows to it. Please can anybody help me or guide me on what i am doing wrong? thank you so much in advance
this will install as normal. before installing however you will need an activation key cos in win 7 this is one of the first pages that is presented before instalation.
the key from your relative could possibly work especially if he used your internet connection to register. but this could cause problems with his/your authenticity after 30 days.
the only other option is to purchase a key.
you say a 30 day trial, does it give you a temporary key for this? -
I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""
Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR -
I have a Macbook and I left it unplugged. It started up slowly when I plugged it in again, but it seemed fine. Once it started charging I shut it down so it would be easier, but now it will not go past the grey screen with the apple. What do I do?
I have Snow leopard on my computer, and I tried to do a hard restart as an article suggested, but it did not work. I also tried cleaning out the PRAM.
The only things I did last night:
-cleaned the history of Firefox out, including cookies
-let it unplugged all night
-plugged it back in the morning, it took a long time to figure itself out, but eventually the time was correct and I got on the internet for a bit
-shutdown the computer since I was going out and thought it would help the computer charge
-came back, tried to turn it on, and found that it would not go past the grey screen the apple on it and the spinning wheel even though I left it for 20 minutes or more
-tried turning it off and on to no availBefore doing a reinstall, which may not be needed at this point,
Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
DALE -
I have changed operator and also changed IOS and did a back up of my old phone in Itunes so i would keep all my contacts etc. Now when i want to get everything back in the phone, Itunes asks me for a password, which i do not have since i did not enter any password when i did the back up. Is there any way I can bypass this password request? Otherwise i have lost all my contacts etc.
Greatful for help.Contacts are designed to be synced to a supported application on the computer or a cloud service like Gmail, iCloud, or an Exchange server.
Have you failed to use the device as designed? -
I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my photos are stored bridge never gets to where I can work. The message appears "building criteria" and I get an endless loop on the lower left panel. How do I correct?
You correct it by leaving Bridge alone until it finishes rebuilding its cache, overnight if necessary.
-
second generation ipod and now when I turn it stays on the screen where it says the date and time and try to log in to use it and I can not to do.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
. Place the iOS device in Recovery Mode if necessary to allow the restore.
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My email account got hacked so I changed the password and now when I try to get mail it just says operation can not be completed even though I have typed in my new password what do I do?
Can you acces the the account on another device?
Try contacting your email provider.
Maybe you are looking for
-
Access the adobe form data in the workflow container for further processin
HI, I am using HCM processes and Forms. I need to access the form data in the workflow container once the workflow kicks off. I need to access these data as would need it for further processing in the workflow. I know that TS17900110 allows to import
-
Access the X-axis value from Flash Chart
Hi, Is there a way I can access the X-axis value from Flash Chart to populate a report in another page? My X-axis is not a direct column in the table it is computed in the query. X-axis is MON-YEAR computed from the Begin_Date column. I want to captu
-
Hi friends Im working on Standard SRM PO smartforms BBP_PO. Since standard form does not have fileds like PRODUCT CATEGORY , MATERIAL NUMBER , PRODUCT CATEGORY DESCRIPTION , MFG NAME , PART NUMBER , Ive to customize stand. Form. My question i
-
How to load/save a file in the WEB-INF?
how can i load and save files in the WEB-INF directory using servlet?
-
EBS Patch Recommendations via My Oracle Support is coming... get involved
Here is a chance to be involved in the feedback look for extending the collector based patch recommendations interface in MOS to include the extensive EBS suite. If you are actively involved with evaluating patches for installation in your Oracle EBS