Windows 8.1 BSOD Bad_Pool_Caller HELP Please

Hi,I've been getting the BAD_POOL_CALLER.I recently installed windows 8.1.Here is my minidump link.please help me.https://skydrive.live.com/?cid=2af6aae703583497#cid=2AF6AAE703583497&id=2AF6AAE703583497%21148

010714-38984-01.dmp 2014-01-07 7:01:11 PM BAD_POOL_CALLER 0x000000c2 00000000`00000007 00000000`00001205 00000000`00000000 ffffe000`05c15668 msrpc.sys msrpc.sys+1553769 Kernel Remote Procedure
Call Provider Microsoft® Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\010714-38984-01.dmp 8 15 9600 300,912 2014-01-07
7:03:53 PM 
010714-43437-01.dmp 2014-01-07 6:56:05 PM BAD_POOL_HEADER 0x00000019 00000000`00000020 ffffe000`021dabe8 ffffe000`021dadb8 00000000`041dab68 mountmgr.sys mountmgr.sys+502769 Mount Point Manager Microsoft®
Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\010714-43437-01.dmp 8 15 9600 300,912 2014-01-07
6:57:27 PM 
010714-40531-01.dmp 2014-01-07 4:51:29 PM BAD_POOL_CALLER 0x000000c2 00000000`00000007 00000000`00001205 00000000`00000000 ffffe000`04e7f848 NETIO.SYS NETIO.SYS+d769 Network I/O Subsystem Microsoft®
Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\010714-40531-01.dmp 8 15 9600 300,912 2014-01-07
4:52:48 PM 
010614-48703-01.dmp 2014-01-06 9:32:06 PM BAD_POOL_CALLER 0x000000c2 00000000`00000007 00000000`00001205 00000000`00000000 ffffe000`05cd1758 mountmgr.sys mountmgr.sys+1161769 Mount Point Manager Microsoft®
Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\010614-48703-01.dmp 8 15 9600 300,912 2014-01-06
9:33:27 PM 
010614-48140-01.dmp 2014-01-06 7:32:57 PM BAD_POOL_CALLER 0x000000c2 00000000`00000007 00000000`00001205 00000000`00010101 ffffe000`05e83178 msrpc.sys msrpc.sys+13a2769 Kernel Remote Procedure
Call Provider Microsoft® Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\010614-48140-01.dmp 8 15 9600 300,912 2014-01-06
7:34:12 PM 
010614-45937-01.dmp 2014-01-06 7:27:52 PM BAD_POOL_CALLER 0x000000c2 00000000`00000007 00000000`00001205 00000000`90a5785b ffffe000`07885818 NETIO.SYS NETIO.SYS+d769 Network I/O Subsystem Microsoft®
Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\010614-45937-01.dmp 8 15 9600 300,912 2014-01-06
7:29:22 PM 
010614-36890-01.dmp 2014-01-06 6:01:13 PM BAD_POOL_CALLER 0x000000c2 00000000`00000010 ffffe000`07ec61d8 00000000`12fffc90 ffffe000`07ec61f0 msrpc.sys msrpc.sys+11c6769 Kernel Remote Procedure
Call Provider Microsoft® Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\010614-36890-01.dmp 8 15 9600 300,912 2014-01-06
6:02:56 PM 
010614-42046-01.dmp 2014-01-06 3:26:26 PM BAD_POOL_CALLER 0x000000c2 00000000`00000007 00000000`00001205 00000000`08860678 ffffe000`08860708 NETIO.SYS NETIO.SYS+d769 Network I/O Subsystem Microsoft®
Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\010614-42046-01.dmp 8 15 9600 300,912 2014-01-06
3:28:05 PM 
010614-35687-01.dmp 2014-01-06 1:20:34 PM BAD_POOL_CALLER 0x000000c2 00000000`0000000b ffffe000`046d3698 00000000`046d3690 ffffe000`046d4488 NETIO.SYS NETIO.SYS+d769 Network I/O Subsystem Microsoft®
Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\010614-35687-01.dmp 8 15 9600 300,856 2014-01-06
1:22:27 PM 
122913-45671-01.dmp 2013-12-29 1:00:11 PM BAD_POOL_CALLER 0x000000c2 00000000`00000007 00000000`00001205 00000000`00000000 ffffe000`0222b688 acpiex.sys acpiex.sys+157879f ACPIEx Driver Microsoft®
Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\122913-45671-01.dmp 8 15 9600 300,912 2013-12-29
1:01:33 PM 
122913-35218-01.dmp 2013-12-29 11:37:06 AM BAD_POOL_CALLER 0x000000c2 00000000`00000007 00000000`00001205 00000000`00380036 ffffe000`07101858 NETIO.SYS NETIO.SYS+d79f Network I/O Subsystem Microsoft®
Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\122913-35218-01.dmp 8 15 9600 300,912 2013-12-29
11:38:17 AM 
122913-47609-01.dmp 2013-12-29 11:21:50 AM BAD_POOL_CALLER 0x000000c2 00000000`00000007 00000000`00001205 00000000`d03a4001 ffffe000`0686c658 NETIO.SYS NETIO.SYS+d769 Network I/O Subsystem Microsoft®
Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\122913-47609-01.dmp 8 15 9600 300,856 2013-12-29
11:23:21 AM 
122613-35343-01.dmp 2013-12-26 10:44:37 PM BAD_POOL_CALLER 0x000000c2 00000000`00000007 00000000`00001205 00000000`05961a10 ffffe000`05961b98 msrpc.sys msrpc.sys+10c179f Kernel Remote Procedure
Call Provider Microsoft® Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\122613-35343-01.dmp 8 15 9600 300,912 2013-12-26
10:45:45 PM 
122613-55531-01.dmp 2013-12-26 10:30:13 PM BAD_POOL_HEADER 0x00000019 00000000`00000020 ffffe000`0224b9b8 ffffe000`0224c6a8 00000000`b4cff080 acpiex.sys acpiex.sys+f9d769 ACPIEx Driver Microsoft®
Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\122613-55531-01.dmp 8 15 9600 300,912 2013-12-26
10:31:52 PM 
121913-47000-01.dmp 2013-12-19 7:31:36 PM DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000d1 00000000`00000028 00000000`00000002 00000000`00000000 fffff800`0197c43f CI.dll CI.dll+0 Code Integrity Module (Test) Microsoft®
Windows® Operating System Microsoft Corporation 6.3.9600.16384 (winblue_rtm.130821-1623) x64 ntoskrnl.exe+14dca0     C:\WINDOWS\Minidump\121913-47000-01.dmp 8 15 9600 300,912 2013-12-19
7:35:00 PM 

Similar Messages

  • How to solve the problem when opening program illustrator cs6 ERROR: 16 It is WINDOWS 8.1 / 64 BIT help please

    how to solve the problem when opening program illustrator cs6
    ERROR: 16
    It is WINDOWS 8.1 / 64 BIT
    help please

    Thanks, Jeff! The file Adobe Setup Error.log contains the following information:
    02/14/14 07:20:26:474 | [INFO] |  | OOBE | DE |  |  |  | 8860 | DEVersion: 5.0.0.0
    02/14/14 07:20:26:475 | [INFO] |  | OOBE | DE |  |  |  | 8860 | Loading library from C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\DECore\DE5\Setup.dll
    [    8860] Fri Feb 14 07:20:26 2014  INFO
    ::START TIMER:: [Total Timer]
    CHECK: Single instance running
    CHECK : Credentials
    Load Deployment File
    CHECK : Another Native OS installer already running
    Create Required Folders
    Assuming uninstall mode
    Lookup for master payload
    [    8860] Fri Feb 14 07:20:26 2014 ERROR
    DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
    [    8860] Fri Feb 14 07:20:26 2014  INFO
    :: END TIMER :: [Total Timer] took 6.90443 milliseconds (0.00690443 seconds) DTR = 579.338 KBPS (0.56576 MBPS)
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s), 0 warning(s)
    ERROR: DW040: The product "{893B3B44-0A1E-404B-8FE8-0A74509102A9}" is not installed. Cannot proceed with the uninstall
    Please search the above error/warning string(s) to find when the error occurred.
    These errors resulted in installer Exit Code mentioned below.
    Exit Code: 33 - The product is not installed, cannot uninstall.
    Please see specific errors and warnings for troubleshooting. For example, ERROR: DW040 ...

  • Whenever I click in a window a new window opens up,  Can anyone help please?

    Whenever I click in a window, a new window opens up.  Can anyone help please?

    Adware?
      Can you run EtreCheck and post the report here please?
      EtreCheck:  https://discussions.apple.com/docs/DOC-6173

  • HT1925 I am trying to open Itunes after an upgrade to itunes--it won't open and now says MSVCR80.dll is missimng.  Where do I get this missing DLL.  Also says Error 7 when trying to open (windows error 126)?? I am on Windows 7 if that matters.Help please

    I am trying to open Itunes after an upgrade to itunes--it won't open and now says MSVCR80.dll is missimng.  Where do I get this missing DLL.  Also says Error 7 when trying to open (windows error 126)?? I am on Windows 7 if that matters.Help please

    See the user tip: https://discussions.apple.com/docs/DOC-6562 for the most complete information.

  • I have had a itunes account for a long time now. I now have windows 8. now the itunes that i was using wont work. I can't find a upgrade itunes to windows 8. Can you help Please..

    I have a ipad and ipod. I can not download any music with itunes. Please help me find itunes that works with windows 8.
       Thank You, Patricia Graham

    Try this site:
    http://www.apple.com/itunes

  • Miix 3 10 inch tablet , No windows 10 update option ! help please

    Hi , I bought the tablet around 2 weeks ago , I had a Yoga 8 2 before and that was showing the update....My Miix 3 tablet is fully upto date  it came with the keyboard dock and is the 1080p display, anyone offer any help , as I would really like to goto windows 10 upon release... One thing I have noticed , is that the tablet has around 12.5 gigs of free space out of 22 gigs , I have only installed small programs , Avast , Opera browser , Google browser , a keyboard languaue pack .... Advice please. TYI

    Hi There, I had the same problem but found a solution online. The update app had been installed but was not running: "If the upgrade app has been installed in your computer, you can try to manually run the app by going to "C:\Windows\System32\GWX" folder and run GWX.exe file." Hope it helps Cheers

  • Wifi works on Windows laptop but not macbook - help please!!

    Hi! I'm a new customer to Verizon having just moved to the US from the UK. We have the DSL service with the 7500 Westell router. I've set up the wireless and it works fine on my husband's laptop (IBM thinkpad with Windows XP) but my MacBook just will not connect properly. I can see our network in the list, and it will connect, but either it drops the connection immediately after connecting, or stays connected and the internet doesn't work. The ethernet connection works absolutely fine. Any advice gratefully received!
    thanks in advance, 
    Kate

    Quick quote from the FIOS area..
    http://forums.verizon.com/t5/FiOS-Internet/Ipod-Touch-quot-Unable-to-connect-quot/m-p/12508#M1968
    remember that all apple products use lower-case letters in the passcode (WEP KEY), and use zero's ( 0 ), not capital O.    Then you may need to, instead of just trying to connect to your network, go to 'create a new network' and enter all info there to build the new connection, remembering that you are using dhcp.   Or you may be able to, after clicking on your network, find out how to enter your security code (WEP KEY) (passcode). 
    If you disable your passcode then anybody can use your wireless network
    While you are not on FIOS, I hope this helps...
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Windows wont BOOT . . .Help Please

    I turned on system this morning & windows wouldn't load & windows Boot manager popped up
    Windows failed to start , A hardware or softwear change might be the cause ( I changed nothing & added nothing)
    Status: 0XC 000 000F
    Info: The Boot selection failed because a required device is in accessable.
    The system is 2 months old & has been running great without any problems, this was just out of the Blue.
    I swapped another new HD in place of the SSD - No Change
    I swap ed all SATA cables & power cables - No change
    I swap ed out the RAM - No change
    When putting in windows disc, to try & boot from, (can not ) can not get past boot manager & (above message)
    HD keeps disappearing in BIOS & RAM fails every first boot & then HD is there & RAM tests OK until save & reboot where everything goes wrong again???
    I am at my wits end having tested everything except the Board & CPU  everything else seams & tests OK in another machine
    HELP!!!. . . Please
    Sandy Bridge Bundle i5 2500K & MSI P67A-G45 SLI Motherboard
    Antec Truepower New 650W Modular Power Supply PFC 80 Plus SLI Ready
    Corsair F60 SSD 60 GB
    G.SKILL Ripjaws X F3-12800CL9D-4GBXL 4GB 2X2GB DDR3-1600 CL9-9-9-24
    LG GH22NS50 Black 22X SATA DVD Writer OEM
    Microsoft Windows 7 Home Premium Edition 64BIT DVD OEM

    Thanks for your reply, I had a Powercolor Radeon HD 6850 775MHZ 1GB 4.0GHZ GDDR5 Video Card installed but swapped it for a GT8800 with No change, so not the card.
    I do not have another Power Supply to swap it out but I did reseat all connections & changed the power cable too the drive & SATA cable with no change, guess I will try & dig up a power supply tomorrow as its the last possible problem item other than the Board or CPU

  • WINDOWS VISTA 64BIT. a little help please!!!

    hi
    i am running windows vista 64 bit, my motherboard is Asus M3A32MVP, soundcard: Soundblaster Xfi, grapics card ATI 3870x2, processor AMD Athalon 6400 plus running on 4 gb of RAM
    as i read all the posts as to how vista does not have the decoding for the audio sound, i think i may have solved the problem that we need in order to get surround sound. everyone needs to take a look at power dvd 7 max ... which has all of the decoding/encoding software for 5./6./7. surround sound, which seems to be missing from vista's os as far as sound is concerned. I keep seeing the particular fix for the creative driver for xp 64 , and vista 64 which was released on 3/4/08. this will fix the 4g of ram problem. i also purchased the instalation cd for the xfi soundcard for vista which is avaliable through the creative web site... IS THERE ANYBODY OUT THERE THAT MIGHT BE RUNNING THE SAME TYPE OF CONFIGURATION AS I AM OR IF SIMULAR TO WHAT I HAVE...AND IF SO IS IT WORKING TO IT'S FULL CAPACITY...... MEANING NO PROBLEMS..... CAN ANYONE HELP ME WITH THIS BEFORE I PUT VISTA 64 BACK ON THE COMPUTER??
    Message Edited by gothdaze on 03-9-2008 03:59 PM

    Again sad, no replies -

  • Stuck trying to install Windows 7 Ultimate on X120e (Help please)

    I just got my x120e yesterday and it came loaded with Windows 7 Home Premium. Since my college offers free Windows 7 Ultimate I decided I would go ahead and install that, plus since I bought the computer used I figured that would be a good clean start. So I downloaded the software and used the windows tool to put the .iso file onto a thumb drive.
    When booting the x120e with my thumbdrive inserted it goes into the windows installation guide. The problem starts where it asks how I want to do the install, Upgrade or Custom. From the directions online and using google it seems I am suppose to select 'Custom' install. Then it asks where I want to install windows: Disk 0, Partition 1(system_drv); Disk 0, Partition 2; Disk 0, Partition 3(lenovo_recovery). When you highlight Disk 0 Partition 1 or 3 it says 'Windows cannot be installed to ...'. Disk 0 Partition 2 includes the bulk of the storage size, but when I highlight that one and click 'next' it comes up and says 'Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information'. Also, I am unable to find anything called 'setup log' to get more information.
    * I did format the Disk 0 Partition 2 after it didn't work the first time
    I decided from googling that maybe I needed to add a hard drive driver in order for it to work. So I went to the Lenovo driver page on my other computer and put that on the thumb drive and loaded the driver in the windows install wizard. This had no effect though and the problem is still there.
    Given I've never loaded an OS before so I'm relying on online instructions and google. I have literally spent close to the last four hours working on trying to install Windows 7 Ultimate onto the x120e and am going to get some sleep and try again I guess.
    * I haven't changed the hard drive or anything, this is using the original 250gb hard drive it came with
    UPDATE: after getting a reply to this question on another forum, they said  "Delete all the existing partitions you see. Start the install on the unformatted partition. You will lose your recovery partition (the lenovo setup with Win 7 Home Premium)."
    So I did that and now the only line that shows up is Disk 0 Unallocated Space, 232.9GB.  However when I click Next the same warning appears as before "Setup was unable to create a new system partition or locate an existing system partition...".  Additionally the options of Delete and Format are no longer there, only Refresh, New, and Load Driver.  Any more help on what to do? thanks

    http://www-307.ibm.com/pc/support/site.wss/TVSU-UPDATE.html
    This program will download everything you need automatically.

  • Installing Windows XP ... Help Please...

    Hello,
    I bought a new MacPro last week, I also bought Windows XP Pro and Parallels. I am familiar with Macs, but not windows, nor parallels. I have no idea where to begin to install. My MacPro is up and running but what is next? Do I install XP first or Parallels first? I tried installing XP first but didn't see the icon called "Install Windows XP" as the manual said it should say. I called microsoft and they were of zero help. They said they would not help me because I bought parallels (instead of virtual PC). I'm the type of person who prefers/wants/needs to have someone "talk to me by phone" and walk me through things. The microsoft person wouldn't or couldn't help, the Apple support person also couldn't help. I'm totally clueless on what to do. My two main problems are:
    1. I don't know what I don't know, so I don't even know how to correctly ask questions nor even what the "right" questions are.
    2. I am easily intimidated and frustrated in searching through tones of text on websites trying to resolve computer problems, it's overwhelming and I have no idea how to find what I need because I am not even sure what those things are...
    thank you in advance to anyone willing to offer me help...
    Tom
    MacPro 2.66   Mac OS X (10.4.8)  

    You should also probalby post your question on the Parallels discussion forums:
    http://forums.parallels.com

  • I am having real problems setting up mulitple profiles on a windows 7 pc... help please

    i have set up mulitple profiles on my other pc, op system xp pro, but i have tried doing exactly the same thing on this pc with windows 7 and it just wont work..
    i get the new profile set up, and i set up a profile manager shortcut on my desktop, but when i try to sort out the shortcut to the new profile it tells me it cant find the target..
    when i open the new profile in profile manager it doesnt sit separate on the taskbar and is only another page version of my default profile...
    firefox exe sits in a really weird address on the comp "C:\Program Files (x86)\Mozilla Firefox"
    i am tearing my hair out so any help you can give would be truly appreciated...

    Each instance of firefox.exe would be on the Windows Task bar, but make sure that you are not pinning them to the task bar. Right click on each one and if you see "Unpin" then unpin it. You can add them to your quick launch as directed in one of my links -- Quick Launch is pretty much hidden in Windows 7 because they were pushing pinning tabs to the task bar (same kind of lunacy is seen in Firefox changes).
    To help you know what you are dealing with in the WTM add the "Command Line": column in the "Processes" tab.
    To unstack the commands on your Windows Task bar
    :see http://dmcritchie.mvps.org/windows-7/win7.htm#taskbar
    "Right click on Windows Status bar, choose properties, then Taskbar (tab) of Taskbar appearance: (Windows Vista Help: Taskbar: recommended links)
    :[x] Lock the taskbar
    :[_] Auto-hide the taskbar
    :[x] Keep the taskbar on top,
    :[_] Group similar taskbar buttons (uncheck because it really interferes with composing a reply)
    :[x] Show Quick Launch,
    :[_] Show window previews (thumbnails) "
    or Taskbar and Start Menu Properties
    :'''Taskbar''' tab
    :[x] Lock the taskbar
    :[_] Auto-hide the taskbar
    :[x] Use small icons
    :Taskbar location on screen: {Bottom}
    :Taskbar buttons: {Never combine}
    :[_] Use Aero Peek to preview the desktop
    :'''Toolbars''' tab
    :[x] Quick Launch

  • Text/icons/window/ALL too big!  Help please

    I'm brand new to the world of mac and have little experience troubleshooting. For whatever reason, only God knows, all that i view on this screen is too big. i tried changing the resolution, restarting, EVERYTHING in system utilities, command + scroll (for zoom) and nothing seems to work.
    Any help would be great!
    thanks

    Thanks Poikkeus but it doesn't seem to be a resolution issue. I've tried all options in res and nothing seemed to work. The dock size hasn't changed, but all else is enlarged. The toolbar text, the windows when I open them. In fact, they're so big that I can't see all the information on a window when it's open.
    Any other ideas?

  • I cannot download itunes 10 for my 4s. a message comes up saying there is a propblem with my windows installer. Can anyone help please

    i a unable to download the latest itunes 10 for my 4S iphone, a message appears saying that there is a problem with the windows installer.
    I have disabled my firewall and virus but it is still no good, any ideas would be appreciated.

    a message appears saying that there is a problem with the windows installer.
    What's the precise text of the message please? (There's a few different ones I can think of that you might be getting.)

  • Help! I am unable to get Boot Camp to recognize my Windows disc; whether I use USB, DVD, CD whatever, I get an error message to insert the Windows Software and wait. HELP please!

    Like I said in my headline, I simply cannot get Boot Camp Assistant to recognize my Windows Software, no matter what method I use. I don't know if I'm not making it mountable or what. Any and all help would be greatly appreciated.
    Thank you in advance,
    Brandon

    Welcome to Apple Support Communities
    Simply skip Boot Camp Assistant and create the Windows partition with Disk Utility > http://pondini.org/OSX/DU3.html Select "MS-DOS (FAT)" as "Format", and apply the changes. By security, choose "BOOTCAMP" as the name of the partition.
    In fact, the only thing that Boot Camp Assistant does is to help you create the Windows partition and download the Windows support software.
    Before creating the partition, open Boot Camp Assistant, tick only the option to download the Windows support software and burn it into a USB drive. You will need it later. Then, make the partition as described above.
    Finally, insert the Windows DVD, restart and hold the C key while your Mac is starting. Since here, you can follow the Apple's steps > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf Remember to choose the BOOTCAMP partition when the installer asks you to format it.
    After installing Windows, insert the USB drive and install the Windows support software

Maybe you are looking for