Windows (8.1) could not find back up devices while creating a system image (0x80070003)

I am trying to create a system image backup under Windows 8.1 Windows Backup is unable to find a backup device with error (0x80070003). No drives are shown under "On a hard disk" and select <Refresh> gives the same error.
A LaCie 1Tb external harddisk is connected to the PC and formatted as an NTFS drive. The hard disk is visable under Harddisk Management and shows up under Explorer mapped as Drive D:
Any thoughts?

Hi,
As you mentioned, the Drive D is mapped from your external harddrive. How did you connect this hard drive into this computer?
If it was connected via network, Please choose "On a network location" and locate the harddrive to check the results.
Kate Li
TechNet Community Support

Similar Messages

  • Flash CS5.5 and Android: Could not find an Android device to connect to...

    I am trying to deploy/debug an application from CS5.5 to an ASUS Transformer TF300 Tablet.  Every time I publish in Flash Pro I get the following error:
    "Could not find an Android device to connect to. Please ensure that you have a device connected, and the device has USB debugging enabled."
    I have tried everything I can find regarding this problem to no avail.  Some details:
    Running Android 4.0.3
    Running Flash Pro CS5.5 on MacOS 10.7.3
    Tried turning USB debugging then back on, multiple times
    Tried turning on/off all other debugging options
    Tried several Flash projects
    Downloaded latest AIR runtime to tablet
    Restarted everything several times
    Still no dice.  Anyone have experience with this? 

    OK I figured it out, or rather found someone else who had.  Thanks to Nick Collins for this extremely helpful tidbit:
    http://nc-design.net:8080/blog/-/blogs/debugging-air-mobile-on-the-asus-transformer-prime- tf201-?p_r_p_564233524_tag=flash+builder&p_r_p_564233524_resetCur=true&_33_redirect=http%3 A%2F%2Fnc-design.net%3A8080%2Fblog%3Bjsessionid%3Df4944a1069029314f050ccd45b5a%3Fp_p_id%3D 33%26p_p_lifecycle%3D0%26p_p_state%3Dnormal%26p_p_mode%3Dview%26p_p_col_id%3Dcolumn-1%26p_ p_col_count%3D1%26p_r_p_564233524_tag%3Dflash%2Bbuilder%26p_r_p_564233524_resetCur%3Dtrue# aqnd_messageScroll16520

  • Kinect for windows speech basics : could not find kinect speech

    hello 
    i am try to run the basic example of sdk 2 for kinect
    but i get this message:
    could not find kinect speech recognizer....
    any solution
    sdk 2 for kinect install
    sdk speech and language pack enUs and itIta install
    any solution??

    hello am new to the forum ...
    I need a good tutorial on voice recognition kinect for windows sdk 2
    I tried the basic example of the SDK but I ridponde: Could not find kinect speech recognizer.....
    any solution??
    i have install:
    kinect sdk 2 for win
    speech sdk and language pack ita and en

  • Windows 8.1 - Could not find recovery environment

    Hello,
    So I bought a refurbished lenovo k450 which is this one http://www.microcenter.com/product/428498/k450_desktop_computer except mine has 8gb instead of 12gb, So I'm trying to factory restore my pc and It tells me "Could not find recovery environment" And nothing happens. 

    Hi Ninja0347,
    Welcome to Lenovo Community Forums!
    Can you try Turning Off the computer completely
    Now Turn it back ON and start hitting F2
    It should boot you to recovery or atleast Give you option to boot to the Recovery Image.
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Could not find supported audio device in AA3

    okay so i know its not a good idea to use AA3 with Vista...but other people are doing it so why can't I? I've seen the topic posted before but the threads are pretty much dead and I still have no helpful info. I've scoured this thing with no affective solution. I've installed AA3 on several systems in the past and never had this much trouble--if any. This problem has gone on for over 2 months now!
    Since I installed AA3 on my new computer all i can get and all i have ever gotten is the "AA could not find a supported audio device. Please check device settings" dialog--
    press okay (or x) and Audition closes---never getting past the loading window --during "initalizing required components"
    I have 3 audio devices/ with up to date drivers which all my other audio programs recognize (Audition 1.5, Sonor, Cubase + more) with no problem whatsoever--
    AA3
    Windows Vista SP1 64 bit
    Realtek HD Audio
    + Presonus FP10 digital firewire interface/preamp (kind of unrelated but aa3 still wont recognize it either apparently)
    I have installed all updates including the 64-bit SP1 fix for AA3.
    I've read the Realtek HD issue solutions and made sure my drivers are fine.
    IM DESPERATE----PLEASE!!!
    I'm having a recording studio built right now & AA3 is my main DAW so this is rather dire.---All the other DAW's i've tried suck compared to AA3 (with the exception of stability). hehe AA3 is always crashing on me and yet i still prefer it over other DAW's.

    I put the PreSonus StudiLive 16.4.2 plus Adobe Audition 3 setup instructions into a short write-up on my blog: Live Event Multitrack Audio Capture
    Here is a photo showing how to set up the Firewire channels for input and output
    I hope this helps:
    Ron Fredericks
    LectureMaker, LLC

  • My soundbooth not function withe error code NV_OGL. the stament: "soundbooth could not find any capable playback modules". but pc system is working. Any one can help me?

    Hi, I am SK Chew,My soundbooth is not function after few months not used and with an error code "NV_OGL" and the statement is "soundbooth could not find any capable playback modules". and my pc is working in good condition. any one can help me?

    Quicktime errors http://forums.adobe.com/message/4545437 may help
    Or, not exactly the same, but MAY be related
    ExporterQuickTimeHost QT Version http://forums.adobe.com/thread/1109614

  • [Sloved]A Problem of Could not find the Python.h while install ns-3

    hey, I got a problem when compiling & install ns3
    I was following the tutorial :download ns-3 using mercurial and build with waf,after run this "./waf -d debug --enable-examples --enable-tests configure" I got output with "Could not find the python development headers ".
    I have both python3 and python2 installed,and system path is set to python2,and the Python.h is just there in /usr/include/,I have no idea how to fix it,any one can help me?
    Here's the build log http://paste.kde.org/682700/
    Last edited by wych (2013-02-28 10:21:38)

    teekay wrote:
    From the build log:
    ['/usr/bin/g++', '-O0', '-ggdb', '-g3', '-Wall', '-Werror', '-fno-strict-aliasing', '-march=x86-64', '-mtune=generic', '-fstack-protector', '-march=x86-64', '-mtune=generic', '-fstack-protector', '-fno-strict-aliasing', '-fno-strict-aliasing', '-march=x86-64', '-mtune=generic', '-fstack-protector', '-march=x86-64', '-mtune=generic', '-fstack-protector', '-I/usr/include/python2.7', '-DNS3_ASSERT_ENABLE', '-DNS3_LOG_ENABLE', '-DPYTHONDIR="/usr/local/lib/python2.7/site-packages"', '-DPYTHONARCHDIR="/usr/local/lib/python2.7/site-packages"', '-DHAVE_PYEMBED=1', '-D_FORTIFY_SOURCE=2', '-DNDEBUG', '-D_FORTIFY_SOURCE=2', '-D_FORTIFY_SOURCE=2', '-DNDEBUG', '-D_FORTIFY_SOURCE=2', '../test.cpp', '-c', '-o', 'test.cpp.1.o']
    err: In file included from /usr/include/limits.h:26:0,
    from /usr/lib/gcc/x86_64-unknown-linux-gnu/4.7.2/include-fixed/limits.h:169,
    from /usr/lib/gcc/x86_64-unknown-linux-gnu/4.7.2/include-fixed/syslimits.h:7,
    from /usr/lib/gcc/x86_64-unknown-linux-gnu/4.7.2/include-fixed/limits.h:34,
    from /usr/include/python2.7/Python.h:19,
    from ../test.cpp:2:
    /usr/include/features.h:330:4: 错误：#warning _FORTIFY_SOURCE requires compiling with optimization (-O) [-Werror=cpp]
    cc1plus: all warnings being treated as errors
    Try this:
    export CXXFLAGS="-O2"
    or export the full CXXFLAGS from /etc/makepkg.conf
    thank you! It's done!

  • Setup could not find sound blaster card Audigy on your system, But I'ts there, can anyone he

    Still having problems, card works fine , no conflicts, onboard soundcard disabled, but can't install software, I have the same system that it has always worked fine on, only difference is I have bought Windows XP Media Edition, It's a Audigy Platinum EX. KX Manager Works Fine, Even the remote So any guesses guys

    halo234 wrote:
    I can't find ctpanel.exe anywhere. I search all my HD's. I must applogies as when I reffered to the other driver I meant the ones from the creatve download site. Such as SBA2_PCWDRV_LB__84_55-R or SBA2_BETADRV_US_2_05_0000. The only I have managed to install is SBA2_EAX4DRV_0303.Message Edited by halo234 on 09-09-2005 09:03 PM
    You find the ctpanel.exe from path SBA2_EAX4DRV_0303\Drivers\WDM\COMMON when you extract the installation packege to your HD, using WinRar.
    You get the latest drivers for your card from station-drivers.
    Extract the driver package to your HD and install drivers using CTZAPXX.EXE found on path Drivers\Support\i386.
    If you download and extract these new drivers, you find the ctpanel.exe from path
    - creative-audigy-5.2.06.6-win32-64-whql\Drivers\wdm\common\i386 or
    - creative-audigy-xfi-5.2.02.43-2kxp-whql\wdm\common\i386
    (depending on which drivers you have) when you extract the package to your HD.
    .jtp

  • Everytime when I quit FCP X, I could not find the file that was created previously. I'm aware files (events/projects) are saved automatically. But strangely when I reopen FCP, the event/projects are not listed.

    I need help here. Saved events/projects are not visible or listed when I reopen FCP X. Tried to open from the event folder don't seem to work.
    I'm using MacOS X 10.6.8 and just bought FCP X 10.1.
    Help.

    No. I'm not using two hard drives. Files saved on MacBook Pro HDD. Only time I use the second HD is for backup but while working on FCP X.
    This is unclear.
    Do you have another HD with FCP X projects and / or events?
    If you do (whether it's a backup or not) it will cause the exact problem you described. Make sure any other drives with FCP X events or projects are turned off before you launch FCP X.
    If you don't have a second drive with events or projects, I suggest you try trashing your preferences.
    Faults like this can sometimes be fixed by clearing out FCP X's preferences (for some reason, they get knotted up from time to time).
    Download Digital Rebellion's Preference Manager (free, simple to use, and quite safe).
    http://www.digitalrebellion.com/prefman/
    With Pref Manager, you can backup the Prefs first, then if trashing makes no difference, you can restore all your settings.
    If you trash them and don't restore them, you will need to go over your FCP X settings again, so it's a great idea to backup Preferences from time to time when FCP X is working well, then you can ditch the bad prefs and restore from your (Digital Rebellion) backup.
    muhammadfromsingapore wrote:
    Thks Bob. No. I'm not using two hard drives. Files saved on MacBook Pro HDD. Only time I use the second HD is for backup but while working on FCP X. I'm getting very frustrated whenever I return to work on the video to find the file 'missing'. I know its there but it's just not showing up on the Event Browser. Sigh!!
    How come you marked your own post as "Correct Answer" when all it does is tell Bob he's wrong? This will mislead people.
    Andy

  • Could not find the main class. & java.lang.NoClassDefFound error:

    sir / madam
    I am facing problems with j2ksdk1.4.0 beta instalation on my windows 2000 advance server.
    while installing pops up a message saying could not find the main class.
    while using java or javac it says
    Exception in thread main
    java.lang.NoClassDefFound error:
    com/sun/tools/javac/main
    even when double clicking java plugin from the control panel
    I get the Java virtual machine launcher saying could not find the main class.
    I don't have any other java sdk installed.
    And i have my environment variables (classpath, path and java_home) set correctly.
    this same j2sdk1.4.0 version is installed in the windows 98 system and it's working fine.
    Kindly do help me to solve this problem.
    eagerly awaiting for your response.
    Thanking you
    Sajeev Nair
    [email protected]

    you must check with the classpath
    please see that you have not repeated %classpath%
    at the end of the class path like you do in win98.
    similiarly with %path%
    in win2000 it is automatically taken care off.

  • Could Not Find 2LIS_03_BX datasource

    Hi Gurus,
    I'm trying to implement inventory management but i could not find the 2LIS_03_BX data source in source system using the TCode
    LBWE.
    The source system is SAP ECC 6.0.
    Cold anyone help me
    thank you
    BR
    Saravanan Ramasamy

    Hi,
    This is not visibile in LBWE. Go to SBIW --> Settings for Application-Specific DataSources (PI) --> Logistics --> Settings: Inventory Controlling --> Stock initialization.
    or Go to MCNB to fill set up tables data for this datasource.
    Hope this helps,
    Regards,
    Rama Murthy.

  • I have backed up my iPad  using iTunes to windows 8 Lenora laptop but I could not find my files and play video files  in my laptop.

    I have backed up my iPad  using iTunes to windows 8 Lenora laptop but I could not find my files and play video files  in my laptop

    You cannot access files in the backup on your computer.
    Do you mean that you synced with iTunes and transferred your purchased videos and app documents? If that is what you mean, what videos are you talking about? If they are videos that you took with the iPad, they do not sync to iTunes. What files?
    What exactly are you trying to do? Details please.

  • Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

    I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
    My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
    We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
    We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
    I have...
    ...reset
    ...reinstalled 7.3.1.3 (over and over and over)
    ...tried different USB ports. (Early on, we saw it once after swapping ports).
    ...tried turning off the ability of the computer to 'Turn this device off to save power."
    I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
    So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
    But even after having tried everything, I still have an unrecognizable iPod.
    When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
    And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
    Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

    Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
    Regards. Adam

  • When I click on an Icon on my desktop to take me to a site (such as google) I get a message that it could not find the loaction. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened.

    When I click on an Icon on my desktop to take me to a site (such as Google) I get a message that it could not find the location. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened. Then when I close the window I see that the message is still there. I have to close it separately. Any suggestions? Oh, and this only happens if Firefox is NOT already active. If I have another Firefox window open when I click on the Icon, it just opens as expected. This message appears no matter which site Icon I select. It did not happen before I upgraded to ver 9.0.

    Hello BassoonPlayer,
    Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using.  FaceTime will not work if you do not have the proper time zone set up for the location that you are in.  This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly.  By the way, you described your problem very well, which makes it easier for us to help you.  Hope this solves your problem -- if not, post back and I can suggest other remedies.
    Wuz

  • HT4623 I was downloading the new IOS and message could not find Iphone - Now my mhone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work

    I was downloading the new IOS and message could not find Iphone appears in Itunes window - Now my my phone is stuck with the power symbol and an arrow pointing to the Itunes symbol, I have tried turning off my phone and turning it back on but nothing seems to work

    So when you plug it into your computer, you're not getting a message in iTunes that it has discovered a phone in recovery mode?
    Reboot both the computer and the phone and try again.

Maybe you are looking for