Windows 8.1 - Could not find recovery environment
Hello,
So I bought a refurbished lenovo k450 which is this one http://www.microcenter.com/product/428498/k450_desktop_computer except mine has 8gb instead of 12gb, So I'm trying to factory restore my pc and It tells me "Could not find recovery environment" And nothing happens.
Hi Ninja0347,
Welcome to Lenovo Community Forums!
Can you try Turning Off the computer completely
Now Turn it back ON and start hitting F2
It should boot you to recovery or atleast Give you option to boot to the Recovery Image.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
Kinect for windows speech basics : could not find kinect speech
hello
i am try to run the basic example of sdk 2 for kinect
but i get this message:
could not find kinect speech recognizer....
any solution
sdk 2 for kinect install
sdk speech and language pack enUs and itIta install
any solution??hello am new to the forum ...
I need a good tutorial on voice recognition kinect for windows sdk 2
I tried the basic example of the SDK but I ridponde: Could not find kinect speech recognizer.....
any solution??
i have install:
kinect sdk 2 for win
speech sdk and language pack ita and en -
I am trying to create a system image backup under Windows 8.1 Windows Backup is unable to find a backup device with error (0x80070003). No drives are shown under "On a hard disk" and select <Refresh> gives the same error.
A LaCie 1Tb external harddisk is connected to the PC and formatted as an NTFS drive. The hard disk is visable under Harddisk Management and shows up under Explorer mapped as Drive D:
Any thoughts?Hi,
As you mentioned, the Drive D is mapped from your external harddrive. How did you connect this hard drive into this computer?
If it was connected via network, Please choose "On a network location" and locate the harddrive to check the results.
Kate Li
TechNet Community Support -
Error:could not find Java 2 Runtime Environment
Greetings,i have a java problem with a game(football manager 2008) installation.I have a hp laptop with windows vista installed and when the installation is on 100%.It appears Error:could not find Java 2 Runtime Environment.I have taken some screenshots to help you understand my problem.
intallation:
http://img218.imageshack.us/img218/7945/egkatastashba2.jpg
the error:
http://img232.imageshack.us/img232/6388/errorty5.jpg
Also i tried to join a site which java is required and it appeard the following errors:
http://img87.imageshack.us/img87/6465/sfalmasp6.jpg
http://img87.imageshack.us/img87/9337/sfalma2sj1.jpg
PS:I have installed the java(Java(TM)6 Update 5).I hope to receive a reply with the solution of the problem as soon as possible.Thank you
Edited by: Cap.George on Mar 7, 2008 8:46 AM
Edited by: Cap.George on Mar 7, 2008 8:47 AMConsider going to a Windows forum
(or better yet, to Microsoft's web site or to a local book store)
and learning about Vista's "User Account Control".
At least do a Google search on it. -
Hello all,
When compiling Flex project with QTP automation libraries included (Flash Builder version is 4.5. QTP is 11, Adobe Flex 4.5 Plugin for HP QuickTest Pro is installed) the message as below pops up
Adobe Flex 4 Plug-in for HP Quick Test Pro
Adobe Flex 4 Plug-in for HP Quick Test Pro could not find
any Flex environment fields (TEAFlex*.xml).
OK
After accepting it there is Flex application shown in IE8.
Trying to record actions in the application gives no effect while TEAPluginIE.dll and TEAPluginQTP.dll are loaded during that.
What could it be providing that TEAFlex.xml is in the directory where the TEA* dlls reside?
Have a nice day!Adobe's official exam guide outlines exactly what you need to know:
http://www.adobe.com/devnet/flex/pdfs/ace_exam_guide_flex4.pdf
I took the Flex 3 ACE recently and found that the guide represents the exam content very well. It looks like there aren't a whole lot of changes in the Flex 4 ACE guidelines.
To answer your questions:
LCDS is not on the exam.
What they expect you to know about the AIR library is very basic. It amounts to simple operation of an AIR app, file system operations, customizing the native window, drag-and-drop, and security. I've never developed an AIR app and got by just fine.
Before taking the exam, I was already quite comfortable with much of Flex. Along the way I learned a few things that I haven't had a reason to touch. I found the exam to be quite easy, but I'm also a computer science guy and has also just experience Java certification which is much more difficult.
I breezed through the Training From The Source book and was happy with it. However, you will do just as well with the LiveDocs for free. -
I am developing a WSS based WCM site for a customer which has a bilingual interface. Now everything is wokring fine in the development environment. Today I backed-up the Content Database and took the related control file (.ascx & .ascx.cs) to deploy it to the cusomter's test machine. I dint face any problems with the deployment, and after deleted and added the Content DB from Central Administration, I was able to access the English part of the website along with my changes without any problem.
But when I tried accessing the Arbic part of the website, Its giving me the following error,
تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: تعذر العثور على تطبيق ويب الموجود على http://172.20.5.163/ar/. تأكد من كتابتك لمحدد موقع المعلومات (URL) بشكل صحيح. إذا كان URL يؤدي إلى محتوى موجود، يجب على مسؤول النظام إضافة تعيين URL للتطبيق المراد خاص بالطلب الجديد.
Roughly translated, it means "Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not find the application on the Web http://172.20.5.163/ar/. Make sure you create your site specific information (URL) correctly. If the URL to the content of lead present, the system administrator to add URL for the application of the appointment of a special request to be new."
Can you please tell me what is the cause of the problem and how to rectify it? Also do I need to
Regards,
SoniSSPIt is searching for the page, but that page is not available. Did u install the current language pack?
-
Eclipse give following error :could not find Java 2 runtime environment
When I try to start eclipse it is giving me following error could not find Java 2 runtime environment.It was working fine untill I installed a new verson of eclipse although I am not whethar that is the source of problem.
When i give java -version command in command prompt it shows
Registry key 'Software\JavaSoft\Java Runtime Environment\CurrentVersion'
has value '1.4', but '1.6' is required.
Error: could not find java.dll
Error: could not find Java 2 Runtime Environment.
My java Home ,classpath , and path are all set as I say it was earliar woking fine.
Please Help.I know this is a relatively old post, but some people can stumble on this page when doing a search for this problem.
Anyway, I ran into this on my PC after I installed Sybase which had an older jre.
Solution:
1. Run regedit
2. Look for Java Runtime Environment
You may have to do multiple searches. Eventually you'll find one with the version number.
3. Modify the value and change it to the correct version number. (in your case, you would have changed it from 1.4 to 1.6).
This is much quicker than reinstalling Java every time installing something that uses an older version of Java hoses up the registry value. -
Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)
I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
I have...
...reset
...reinstalled 7.3.1.3 (over and over and over)
...tried different USB ports. (Early on, we saw it once after swapping ports).
...tried turning off the ability of the computer to 'Turn this device off to save power."
I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
But even after having tried everything, I still have an unrecognizable iPod.
When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
Regards. Adam -
Windows 7 64-bit Installation Error "Could not find appropriate listener"
*11.2.0.1* Installation fails on Win7 Professional 64-bit
1) Installed software (did not create database initially)
2) Create Listener via Net Config (no apparent problems here)
3) Added DB to Listener via Net Mgr
4) dbca fails in final portion of DB creation. Error states: *"Could not find appropriate listener for this database. Configuring DB control requires database to be registered with at least one listener.*
My Listener services is started.
All current updates have been applied to Win 7.
I have searched around and found similar issues that seem to center around adminstrator rights, but I have not been able to make any progress.
C:\Users\scott_hp>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 10:16
:11
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1522
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 20-FEB-2012 09:47:07
Uptime 0 days 0 hr. 29 min. 7 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\app\scott_hp\product\11.2.0\dbhome_1
etwork
\admin\listener.ora
Listener Log File c:\oracle\app\scott_hp\diag nslsnr\SCOTT-HP\listener\
alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.0.195)(PORT=1522)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "mmodb.192.168.0.195" has 1 instance(s).
Instance "mmmodb", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully <gphmh>
Edited by: svk1965 on Feb 20, 2012 7:17 AM
Edited by: svk1965 on Feb 20, 2012 7:22 AMsvk1965 wrote:
FIXED!! *Thank you very much.* I followed your instructions, renaming listener.ora, before the lsnrctl start. I then waited and ran dbca and walked through the configuration screens and this time it processed through to 100%. But I am not sure I understand what caused the issue??
C:\Windows\system32>lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:34
:24
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.0.195)(PORT=1521
The command completed successfully
C:\Windows\system32>lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:36
:51
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Starting tnslsnr: please wait...
TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Log messages written to c:\oracle\app\scott_hp\diag nslsnr\SCOTT-HP\listener\al
ert\log.xml
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 20-FEB-2012 11:36:56
Uptime 0 days 0 hr. 0 min. 5 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File c:\oracle\app\scott_hp\diag nslsnr\SCOTT-HP\listener\
alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
The listener supports no services
The command completed successfully
C:\Windows\system32>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 20-FEB-2012 11:39
:30
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 20-FEB-2012 11:36:56
Uptime 0 days 0 hr. 2 min. 37 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File c:\oracle\app\scott_hp\diag nslsnr\SCOTT-HP\listener\
alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=SCOTT-HP)(PORT=1521)))
Services Summary...
Service "mmmodb.192.168.0.195" has 1 instance(s).
Instance "mmmodb", status READY, has 1 handler(s) for this service...
Service "mmmodbXDB.192.168.0.195" has 1 instance(s).
Instance "mmmodb", status READY, has 1 handler(s) for this service...
The command completed successfullyThe db instance will register itself with the listener every minute or so. When you first start the listener, it will have to wait until the next cycle of the instance self-registration before it (the listener) knows about the db instance. -
Hi Experts,
When I am installing Oracle client 32 bit software on Windows 7 32 bit I am getting error as "could not find main class program will exit"
I have tried installing latest Java software 7 also JDK 1.6.0_34 still I am getting the same problem below is my " oraparam.ini " details
[Oracle]
DISTRIBUTION=TRUE
SOURCE=../stage/products.xml
LICENSE_LOCATION=
BOOTSTRAP_COMPS="oracle.swd.oui:11.1.0.6.0,oracle.swd.oui.core:11.1.0.6.0,oracle.jdk:1.5.0.1.1"
JRE_SCRATCH_LOC=jdk/jre
JRE_MEMORY_OPTIONS=" -mx96m"
DEFAULT_HOME_LOCATION=product\11.1.0\client
DEFAULT_HOME_NAME=OraClient11g_home
NO_BROWSE=/net
NLS_ENABLED=TRUE
BOOTSTRAP=TRUE
EXT_JLIB=../stage/ext/jlib
OUI_VERSION=11.1.0.6.0
## JRE_VERSION is only for Windows. This is to copy accessbridge dlls
JRE_VERSION=1.4.2
ACCESS_DIR=../install/access
#SHOW_HOSTNAME=ALWAYS_SHOW shows the hostname panel always
#SHOW_HOSTNAME=NEVER_SHOW does not the hostname panel
#SHOW_HOSTNAME=CONDITION_SHOW shows the hostname panel on condition
SHOW_HOSTNAME=NEVER_SHOW
#THIN_JDBC_FILENAME is optional and defaults to classes12.jar
#The value specified for this should be packaged with OUI, and should
#be relative to <OUI expanded stagedir>/jlib/
THIN_JDBC_FILENAME=classes12.jar
#RUN_OUICA specifies the batch script name that needs to be run
#The script is ouica.bat for win32, and ouica.sh for solaris.
#If the value is not specified, then the OUICA script is not run
RUN_OUICA=ouica.bat
CLUSTERWARE={"oracle.crs","10.1.0.2.0"}
SILENT_VARIABLE_VALIDATION=TRUE
[Generic Prereqs]
MIN_DISPLAY_COLORS=256
[IMAGES]
FILE1=images/billboards.gif
LICENSE_LOCATION=license.txtDuplicates of the other two times you asked this question:
https://forums.oracle.com/thread/2559093
https://forums.oracle.com/thread/2558027
(and this time, your question does not appear to have anything to do with this particular forum space, either)
Duplicate is locked.
Do not EVER multi--post. That is extremely bad forum etiquette. -
When I click on an Icon on my desktop to take me to a site (such as Google) I get a message that it could not find the location. Then it goes ahead and opens a Firefox window with the site anyway as if the message never happened. Then when I close the window I see that the message is still there. I have to close it separately. Any suggestions? Oh, and this only happens if Firefox is NOT already active. If I have another Firefox window open when I click on the Icon, it just opens as expected. This message appears no matter which site Icon I select. It did not happen before I upgraded to ver 9.0.
Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz -
Acrobat Plug In...Could not find external window handler
When I try to open a pdf file with Adobe Acrobat, my computer gives me a prompt, Acrobat Plug In...Could not find external window handler...
The problem just started recently. I am running Adobe Acrobat 6.0 and the ME version of Windows. The Microsoft help desk told me this was an Adobe problem.
Can anyone give me some advise?Hello.
I'm getting the same problem.
Did you find a solution?
Thanks a lot -
ORA-12516: TNS:listener could not find ... on Windows Server 2003
We are getting "ORA-12516: TNS:listener could not find available handler" while testing asp.net web application.
We have following configuration:
- A 10g database server on Windows Server 2000
- A Web Server running IIS6 on Windows Server 2003
- ODP.Net for 10g client installed on Web Server
we are testing our web app with 75 concurrent users, as far as I can tell we are closing connections in our app and open connection only while retrieving and saving records.
I saw this error very first time when we upgraded our web server to use 10g client. Before that we were using Oracle 9 client and have tested this app with 100 concurrent users without any error.
Does anyone can help or point a resource that can help to resolve this error?
Thanks.Hi,
You'll likely want to take that up with the networking folks as the error seems to be coming from the Listener.
How many connections does each instance of your app make? If you make the same number of connections via sqlplus for example rather than ODP, do you see the same results? I know creating 60 or sqlplus sessions may not be fun, but it will help determine if this issue is truly somehow related to ODP. It doesnt seem likely it would be, and if ODP can be removed from the picture, it will be that much easier to troubleshoot.
One thing I'd suggest though, is to make sure your app is cleaning up after itself properly to as to use resources efficiently. If you have access to My Oracle Support, see the following note:
Note 730678.1 Oracle Data Provider for .Net Best Practices
Hope it helps,
Greg -
"Could not find the main class" Error While installing 11g in windows 7
Dear All,
I am getting error message while installing oracle 11g R1(32 bit) on Windows 7(32 bit)
I have downloaded from oracle website only..
After Clicking the OUI I am getting the Error Message pop up is "Could not find the main class.Program will exit"
I don't know what is the reason behind this error .
what would be the reason for this error..
Pls help me....
By
MuthuI think you need to download oracle software again...
Oracle Universal Installer - Could not find main class -
Internet Recovery could not find installation information on this machine.
Hi there I've bought an iMac the latest model as well as the Macbook Air also the latest model and the Airport Extreme also the lastest model but i am unable to do internet recovery and none of my devices came with operating disc to restore my systems. I'm always prompted with the error "could not find installation information on this machine". Is there anyway I could have this fixed? I've called technical support and they said they cant do anything but for me to bring it to any apple support centre to get it formatted. Its alot of trouble for me to go down leave the machine there for a few days and come back to collect it again. Both my machines are extremely new and could not perform this internet recovery from day one. I even though it was my router so i gave away my WNDR 3700 and bought the apple airport extreme. Please help
It's possible there is a block on your Interet connection. If it works on a Apple network but not yours then that points the finger at your network. If this is a home network then I'd start by changing the DNS settings to:
1. System preferences
2. Network
3. Click Advanced
4. Click DNS tab
5. Click + sign
6. Add 208.67.222.222
7. Click + sign
8. Add 208.67.220.220
9. Click OK.
10. Exit System Preferences
If you are on a business network or any other type of network where someone else has control over it then they may have put certain restrictions on it. In that case you will have to contact the Network Administrator for help.
Maybe you are looking for
-
Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately. Is there some way I ca
-
30 pin to lightning adapter revised? How to purchase original version?.
In November of 2012 I ordered a 30 pin to lightning adapter through Amazon. It had the model number A1468 on the back. I believe Apple was the supplier for this part as it had all their standard info printed on the back of the adapter. I used it wi
-
Hi I'm getting this error when creating an instance of a class from a loaded module: Skin for phcfx.mainView.vsMain.formContainer.FormWindow2862.contentPanel.PresentationBuilderView28 63.templatePicker was not found. This templatePicker component is
-
How to cache columns that are dashboard prompts?
Hi, I have a few columns in a table that are defined as dashboard prompts. The values in a particular column in the dashboard prompt are constrained based on the value selected in the previous dashboard prompt. Once a user logs in he/she can see only
-
Not responding when I try to go back to an old project
Please help I edited a film and then went onto another project and now I wish to go back to the previous film to do more work on it but when I try and load the previous film final cut says not responding why is that happening