Windows 8.1 Crashed during WEC2013 installation

I successfully installed WEC2013 (update 5), afterwards I attempted to install WEC2013 Update 11. It appeared to be going along fine and then Windows 8.1  blue screened.   Once I rebooted, I tried to launch the installer again,
naively hoping it would pick up where it left off and everything would continue on normally, of course, no such luck.  The WEC splash screen comes up for about 5 seconds and then goes away, no error message, no nothing.
I tried this with the update 5 installer as well as the update 11 installer, same behavior for both.   I went to Programs & Features, in an attempt to uninstall from there but same behavior as above.
Before I start manually deleting folders, I thought I would see if someone had some ideas on what I might try.
Thanks in advance.

My guess is SQL Server 2008 R2.
Check the following KB article for details:
http://support.microsoft.com/kb/2681562
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Similar Messages

I installed visual studio 2010 in my windows 8.1 system.during the installation sql server 2008 r2 features were installed.so which version of sql server i need to install(2008 or 2008 r2)?

hi,
I installed visual studio 2010 in my windows 8.1 system.during the installation sql server 2008 r2 features were installed.so which version of sql server i need to install(2008 or 2008 r2)?
regards,
harsha.

My guess is SQL Server 2008 R2.
Check the following KB article for details:
http://support.microsoft.com/kb/2681562
Kalman Toth Database & OLAP Architect
SELECT Video Tutorials 4 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

VMware slices Crash during Grid installation [ Ora 11 G R2,VMware Linux ]

Hi,
Iam using Windows Xp [ 32 bit ] with 4 GB RAM and 150 GB Hard-disk.
I have installed VMWare Server with 2 RAC nodes [ along with the shared disk ], following the steps given at oracle-base.com.
However, during the grid installation, vmware slices [ RAC1, RAC2 ] are getting closed automatically, when i run "root.sh" on rac2 node.
The script ran fine on node1 [ rac1 ] and this problem is occuring only during rac2 run.
I have kept the memory as 2GB each and allocated 45 GB each with 10 GB for each shared disk.
Requesting help/info on the above, as why the nodes come down, during the installation.
Also, wanted to know, lets say, if grid installation failed and we found/fixed the problem. Can we re-run the grid installation from the point, it failed ?
Regards
Roopesh M.

VMWare is not supported for Oracle Clusterware/RAC. That may itself be the reason. Oracle VM is tested and supported. Perhaps you may want to try that
Regards,
Anil Nair
Global Tech Lead/Oracle Clusterware and RAC
Oracle Support

Windows support software crashes during load

Ok fellas, 5 days and counting. I have tried for 5 days to get the Windows support software to load and so far...no joy. I have a Mid-2009 MacBook Pro, running Mavericks, 8 GB of RAM, PLENTY of HDD space and 2.53 GHz Intel Core 2 Duo processors. Should be a piece of cake right...nope.
Each time software support setup dumps at approximately the same spot, somewhere around the MacHAL.sys or Apple time services. I have the Windows 7 disc with the iso image, I have an 8 GB USB flashdrive and Windows 7 installed on the partition.
I do not have the original software disc that came with my MacBook, that is in a box somewhere between my current location (not Okinawa) and Okinawa.
I hope I have provided enough information for one of you Mac Geniuses out there to tell me what to do. This is the first time I have not been able to solve an issue with my MacBook...again, no joy.
Thanks!

Thanks for the reply Bob.
I am trying to install 4.0.4033 version of Windows support software downloaded from Apple. I did find a copy of OSX Lion I had made when I upgraded to that version but I am not sure if that will work or not. I have tried many, many things but it always does the same thing, crash when it gets to KeyAgent Services or MacHal.sys ... somewhere around there.
I did read somewhere that the Mid-2009 MacBook Pro has a 64 bit architecture but the support software does not allow installation of the 64 bit parts...odd.
Again, thanks for the reply.

After a crash during the installation of Captivate, the installation program does not "initialize" and the installation procedure stops. Any suggestion?

I bought “Captivate” few days ago. I received the internet address to download the program and the activation number. I downloaded the program (OK), started the installation program (OK) and received indications that the decompression process was OK. Then the installation started and I was asked to introduce the activation number (OK). After this, a bar showing the progress of the installation was shown on the screen. The bar stopped at 2%. I waited more than 20 min and saw no progress. Then I decided to start the “windows task manager” to see if the process was active. I have windows 7, so I pressed alt-ctrl-del and received the message (2-5 min later) that the task manager could not start. I waited more time (more than 1 hour) and since the installation progress was still indicating 2% and since I still could not activate the task manager, I rebooted the computer.
I then tried to reinstall the program. After the decompression, I receive the message:”Installer failed to initialize. Please download Adobe support advisor to detect the problem”. I followed the link to discover that the program is no more available.
What should I do?

Hello,
Please follow the steps down below .
Disable the start up items. ( Ms config )
Rename the OOBE folder from the location mentioned below .
Windows: C>Program files or Program files(x86)>Common files>Adobe>OOBE and rename the OOBE folder to like (OOBE_old).
Uninstall the Adobe Captivate 8 components manually from the machine. Delete all the Adobe Captivate files and folders manually.You may check the following locations.
                  o   C:\Program Files\Adobe*
o   C:\Program Files\Common Files\Adobe*
o   C:\Program Files\Common Files\Macrovision Shared
o   C:\Program Files (x86)\Adobe*
o   C:\Program Files (x86)\Common Files\Adobe*
o   C:\Program Files (x86)\Common Files\Macrovision Shared
o   C:\ProgramData\Adobe*
o   C:\ProgramData\FLEXnet
o   C:\Users\<user_name>\AppData\Roaming\Adobe*
o   C:\Users\<user_name>\AppData\Roaming\com.adobe.*
o   C:\Users\<user_name>\AppData\Local\Adobe*
o   C:\Users\<user_name>\AppData\LocalLow\Adobe*
o   C:\Users\<user_name>\AppData\Local\VirtualStore\Program Files\Common Files\Adobe*
Create a new user account which has the admin rights on it.
Restart the machine.
Login to a new user account .
Once you are logged in then try to install it again.
Regards,
Rajeev .

Windows 7 Computer Crashes During Gameplay

So, I understand I have an old laptop that I have been doing repairs to myself which has made it able to last past four years so far, heres the issue I am having though.
I could be playing just about any game and will play for maybe 10 minutes then the screen goes black then shuts off on me. I ran CPU-Z & HWMonitor and the temp shows CPU is at about 75C. I had just installed a new HDD as the old one became corrupt and
stopped working, installed windows 7 perfectly fine on it no problem. Battery status reads as "Good" and I had just cleaned out the fan of any settling dust. I am not sure if needed but here are the specs below.
-Windows 7 Ultimate (64bit) with Intel Core i7 processor, Q740 @ 1.73GHz (8 CPUs), 6 Gigs of RAM (6144MB RAM)
Either or, I am probably going to sell it for what I can and build my own gaming rig or just go to Best Buy, but before so, I would like to see if I can find out the cause of why it is shutting down. I know there are a large number of possibilities of why
it could be doing so, but if I can get help narrowing it down, that would be great.
Thanks!

To be able to troubleshoot what might be causing your system to crash, we need the dump files. In an ideal situation, more than one file would be needed to establish a pattern so if you do have more than one, please upload them.
Please refer to the link below for steps to retrieve, zip and upload them to the file sharing site like onedrive, google's "dropbox, etc.
When you are done, make the folder public and share the link here.
Blue Screen of Death Co-Authored by ZigZag3143& JMH3143
http://answers.microsoft.com/en-us/windows/wiki/windows_other-system/blue-screen-of-death-bsod/1939df35-283f-4830-a4dd-e95ee5d8669d

Trouble downloading Snow Leopard sw updates- system crashes during update installs. I'm only trying to get to the AppStore to download

I've upgraded from Leopard to Snow Leopard... fine.
Installing the system updates (the AppStore isn't in the Snow Leopard install, just available via a system update)
The updates appear to have downloaded ok, then the system restarts to install, and .... CRASH. All's I'm trying to do is legally get to Lion.
I have a 15" Macbook Pro, 2gb ram, dual core Intel, 120gb drive.
Should I re-install Snow Leopard, or anyone have any good ideas? I suppose it could even be a hardware problem of some sort, but the system seeems stable unless I try to do the sw updates.
Please help!
Thanks all!

dual core Intel / All's I'm trying to do is legally get to Lion.
Lion requirements:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
From here > Apple - OS X Lion - Technical specifications
Click your Apple icon top left corner of your screen then from the drop down menu click: About This Mac
If it doesn't say: Intel Core 2 Duo
Then you can't upgrade the Mac to Lion.

Macbook Pro Crash during Update Installation

Hello All,
I currently have a 15-inch early 2011 model macbook pro that is not functioning as it should be. For the past few weeks my mac has randomly shut off and given me the message "Your Computer Restarted Because of a Problem." With that said I began to take note as to when this was occuring and realized that anytime I tried to install new software or updates it would immediately shut the computer down after starting the install process. When I tried to install updates on my computer in an effort to combat the issue it would simply shut down during that install process as well.
Below is my most recent Panic Log:
Tue Mar 26 18:53:25 2013
panic(cpu 1 caller 0xffffff800e4ac90b): Releasing non-exclusive RW lock without a reader refcount!
Backtrace (CPU 1), Frame : Return Address
0xffffff812fbfb820 : 0xffffff800e41d626
0xffffff812fbfb890 : 0xffffff800e4ac90b
0xffffff812fbfb8b0 : 0xffffff800e51c09c
0xffffff812fbfbae0 : 0xffffff800e508fab
0xffffff812fbfbb90 : 0xffffff800e4fbb49
0xffffff812fbfbc40 : 0xffffff800e4fc314
0xffffff812fbfbf50 : 0xffffff800e7e182a
0xffffff812fbfbfb0 : 0xffffff800e4ced33
BSD process name corresponding to current thread: installd
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000000e200000
Kernel text base: 0xffffff800e400000
System model name: MacBookPro8,2 (Mac-94245A3940C91C80)
System uptime in nanoseconds: 319123625868
last loaded kext at 98271975427: com.kaspersky.kext.kimul.44          44 (addr 0xffffff7f907e4000, size 45056)
loaded kexts:
com.kaspersky.kext.kimul.44          44
org.virtualbox.kext.VBoxNetAdp          3.2.6
org.virtualbox.kext.VBoxNetFlt          3.2.6
org.virtualbox.kext.VBoxUSB          3.2.6
org.virtualbox.kext.VBoxDrv          3.2.6
com.paceap.kext.pacesupport.snowleopard          5.8
com.serato.usb.kext          2.3.0
com.kaspersky.nke          1.0.1d41
com.kaspersky.kext.klif          3.0.0d23
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleTyMCEDriver          1.0.2d2
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDAHardwareConfigDriver          2.3.1f2
com.apple.driver.AppleHDA          2.3.1f2
com.apple.filesystems.autofs          3.0
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.kext.AMDFramebuffer          8.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.AMDRadeonAccelerator          1.0.0
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleIntelHD3000Graphics          8.0.0
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AppleSMCLMU          2.0.2d0
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.driver.AppleMuxControl          3.2.11
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.SMCMotionSensor          3.0.2d6
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.driver.AppleIntelSNBGraphicsFB          8.0.0
com.apple.iokit.IOBluetoothUSBDFU          4.0.9f33
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleUSBTCButtons          235.4
com.apple.driver.AppleUSBTCKeyEventDriver          235.4
com.apple.driver.AppleUSBTCKeyboard          235.4
com.apple.driver.AppleIRController          320.15
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.AppleFileSystemDriver          3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AppleSDXC          1.2.2
com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AirPort.Brcm4331          602.15.22
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleUSBUHCI          5.2.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.kext.triggers          1.0
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.iokit.IOAcceleratorFamily          19.0.26
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.kext.AMD6000Controller          8.0.0
com.apple.kext.AMDSupport          8.0.0
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleThunderboltEDMSink          1.1.8
com.apple.driver.AppleThunderboltEDMSource          1.1.8
com.apple.driver.AppleThunderboltDPOutAdapter          1.8.5
com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
com.apple.driver.AppleUSBMultitouch          235.7
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.driver.AppleThunderboltNHI          1.6.0
com.apple.iokit.IOThunderboltFamily          2.1.1
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IOEthernetAVBController          1.0.2b1
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Crash during OS installation

My ibook G4 started freezing whenever I switched on Airport, but was otherwise ok. I tried reinstalling the Tiger software but the laptop switched itself off halfway through the installation. I now can't restart it from laptop nor disc. Any ideas how to restart and do a completely new installation please? Installation disc 1 and holding C key on restart doesn't work - just a black screen.

Your HD may be shot, but maybe repairable.
Try holding the Option Key at Bootup, does that work?
Does it boot into Open Firmware with CMDOption+of ?
http://docs.info.apple.com/article.html?artnum=42642
Have you done a PRAM reset...
http://docs.info.apple.com/article.html?artnum=2238
Tried resetting the PMU?
http://docs.info.apple.com/article.html?artnum=14449

CC is crashing during install on my macbook.

CC is crashing during install on my macbook. What can I do to resolve this and install CC successfully?

I have a new Macbook Pro (purchased from apple 2 months ago) with OS X Yosemite. Creative Cloud was working perfectly and I downloaded a free trial of Photoshop CC. After the trial ended, not only photoshop CC, but, CC in general stopped working and so I deleted it all in hopes of being able to re-download CC and then buy Photoshop CC. However, I've tried to reinstall CC numerous times (about 15-20 attempts) and it repeatedly crashes during the installation process.

Help!10.4.9 crashed during installation

My g4 crashed during the last part of the update. I now have an incomplete installation that would not start up. I lost 10.4.8. I installed 10.4 on my second internal hard drive, so I coud run my mac. How do I get back to using my original drive without losing any info/settings?
G4 Mac OS X (10.4.8) Lost 10.4.8

Hi! Same thing has happened to me. As my next step, I want to start using the installation disc, but the drawer to my optical drive won't open. Do you know how to get around that?
Thank you for your consideration.
PFW
That happened to me on my MacBook... I'll try giving
you directions, to the best of what I remember...
What I did is found my installation DVDs... (I
thought I had lost them!)
Turn your computer on and put the first disc in.
...Restart it (improperly, if you have to). Before
you turn it back on, hold down on the "C" button...
it took me about 5 minutes before I saw anything
happen. Go through the buttons as if you were
re-installing it...
At the end, there's a window you should see pop up
and it'll have a few things to check off... one of
them is reinstalling OSX without wiping out what
you've put on the computer.
Best of luck.

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

Repair your Apple Application Support.
Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

I am using Windows 7 Home Premium 64-bit OS. I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installa

I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!

Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Cannot install itunes 10.6 to my windows 7 computer. Have tried several times, completely unistalled several times, all with same result. Error message that starts "An error occurred during the installation of assembly 'Microsoft VC80 CRT. type="win 32"

Keep getting the following error message when I try to instal itunes 10.6. An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win 32". version = "8.0 50727.61 95". public Key token = ""1fc8b3b9a1e18e3b." processor architeture = "x86". Please refer to help and support for more information.
HRESULT:0x80073712
The program then acts like it is still trying to load, but then I get another message later which reads:
Service 'Aple Mobile Device' failed to start. verify that you have sufficient privileges to start system services.
any suggestions?

HRESULT: 0x80073712
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 80073712, or some other number? (If they're another number, what number are you getting?)

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195",public key token 1fc8b 3b 9a 1e 18e 3b",processorArchitecture="x86".Ple

I am unable to install Itunes on Windows 7 as I am getting the message "an error occured during the installation of assembly "Microsoft VC80.CRT Type ="win32" version="8.0.50727.6195”,public key token 1fc8b 3b 9a 1e 18e 3b”,processorArchitecture=”x86”.Please refer to Help and Support for more information:"HResult 0x800736FD

I found htis other post https://discussions.apple.com/thread/3401328?start=0&tstart=0
I also found this in another post
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.)

Windows 8.1 Crashed during WEC2013 installation

Similar Messages

Maybe you are looking for