Windows 8.1 - data card asking administrator password while connecting.

Dear Microsoft team,
My data card asking administrator password while connecting.
I am using win 8.1 64 bit and i have already changed UAC settings.
Note : it is working fine in administrator login.
Any help  appreciated in advance !

Hi,
Based on your description, this happens to a standard domain account, you don’t necessarily disable the UAC, instead, you can add the domain account to the local administrator group, in this way, you grant permission to this account, then log on with the
domain account again to check the result.
You can follow the referenct below for details about it, this link is for Windows 7, but apply for Wndows 8, too:
http://windows.microsoft.com/en-us/windows/add-user-account-to-group#1TC=windows-7
Regards
Wade Liu
TechNet Community Support

Similar Messages

  • HT1695 Why my iphone is not asking for password while connecting wifi connection?

    while connecting wifi connection iphone did not ask for password.therefore did not connect.

    maybe, your iphone already have the password of your wifi

  • Setting password while connecting as sysdba

    dear DBA experts,
    how do we set password for sysdba while connecting to database.since we dont have password while connecting as sysdba.pls help me out...pls give me some steps ........
    thanks n regards
    aryan

    The password for the sys user is already set at the time of the database creation and is stored in the password file , available at the *$oracle_home/dbs* (on Linux) platforms. But this file is not used and is bypassed if the o/s user, mostly oracle , is a part of a group called dba group. So if you want the password file to be used, simplest would be to remove the user Oracle from the dba group.
    HTH
    Aman....

  • It asks for password while run

    after downloading the setup when i made it to run it asks me for password with already username Administrator

    it's necessary to provide Windows this administrative password.
    Windows tries to ensure this way that its ''you'' who really want to install Software and not a virus.

  • NB250 ask for password while system recovery

    Toshiba NB250
    W7 starter
    When I try recover system it ask password for user administrator "TOSHIBA".
    What is the true procedure?

    On step 3 must be used Windows login and password. This is protection if you dont want that someone else use your preinstalled Windows and also cannot start HDD recovery installation.
    Toshiba doesn't set any kind of password. If you dont use password for Windows login then you must not enter password on this step.
    By the way: by first Windows setup when notebook was new and started for the first time Toshiba was set as user name. Have you bought this notebook as new one? Have you started first OS configuration?

  • System is asking for password while executing t.code RSUDO

    Hi
    While executing t.code RSUDO ( Execute as user with restricted authorizations) on behalf of other user, system is asking for password.
    Can you tell the reason for it?
    System is BW 731.
    Thanks
    Saurabh

    Hi
    I had the same problem.
    What solved it for me was to add authorizations in PFCG for one of my roles
    The autorisation is : "Execution of transaction RSUDO without password"
    Heres what I added in PFCG:
    Authorization obj: R_SEC
    RSECADMOBJ:   RSUDO
    RSECADMVAL:   *
    ACTVT:                16
    Hope it will solved your problem.
    Robin

  • My MacBook Pro Keeps on asking for password while login

    My new mac book pro keeps on asking for admin password while login even i am entering correct password.
    I am sure that i am entering correct password (as when i enter wrong password some beep sound is coming).   
    Even i tried the same by changing the admin password, but same thing is happening. Please tell me how to proceed with this, thanks!!!

    Can anyone help me in resolving this issue !!!!!
    My new mac book pro keeps on asking for admin password while login even i am entering correct password. I am sure that i am entering correct password (as when i enter wrong password some beep sound is coming).  
    Even when i tried to install Flash player or Google engine (any similar softwares), its keep on asking for the password.
    Even i tried the same by changing the admin password, but same thing is happening. Please tell me how to proceed with this, thanks!!!

  • Hide Password - While connected to VGA or Airplay

    iPads are great for displaying presentations, but logging into services while presenting is a security concern.
    Since iOS was created, you have been able to see the user type their password on the keyboard and the last letter they have typed in the password field on a connected display or projector. You even can see when people type in pin codes. This is big security concern for us, since faculty have to login to services while they present in class. I'm surprised that these isn't a way to mask your passwords and pin codes while connected to VGA or airplay. It seems like common sense to me that if iPads are going to be seriously used for business and educational presentations, that this feature should at least be added to configurator.
    Also, to those of you that think we should type faster, not everyone can type quickly on a touch screen. We see instructors slowly pecking in passwords and it's keeping us from recommending anything that requires a login. Touch ID sounds interesting but these iPads are shared with several faculty and are left in the classroom.
    Does anyone else agree that we need this feature?

    I agree completely.  If Apple can override 3-rd party keyboards when passwords being entered then they could certainly also prevent the display of password characters when projecting from iOS.  I have found myself disconnecting the VGA cable or using the projector remote to "blank" the screen when entering passwords.  As presenting from iOS devices becomes more popular they should really address this.
    we should all submit official feedback to request a solution in a future iOS update:  https://www.apple.com/feedback/iphone.html

  • Accessing a Windows Server 2012R2 system when the administrator password has been forgotten

    Hello,
    Is there a last resort method of getting back into the system?
    I understand that with 2012R2, you can no longer make a Windows recovery disk.
    Thanks for your help.
    Keith
    R K Howard

    Hi Keith,
    I agree with Milos, there is no other solution from Microsoft to solve forgotten password issue other than restore:
    Microsoft policy about lost or forgotten passwords
    http://support.microsoft.com/kb/189126
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • Time Machine keeps asking for password to connect to the Time Capsule server

    I just got my MPB back from having the logic board replaced.
    Nothing was changed on my Mac OS 10.6.8, except that when my MPB went kaput I used a Windows OS PC and loaded the Air port Utility and did do a firmware upgrade to 7.6.1 for the Time Capsule(TC)
    Now that I am trying to do a backup of my MPB I keep getting a message asking me to enter the password for the (TC) server so that Time Machine(TM) can connect to it. I typed in the disk password and the weird thing is that the disk icon flashed quickly showing the TM clock icon and the immediately went to the 3 people holding hands icon. When I waited or forced the backup it would come up with an error stating that my user name and password are incorrect.  The other weird thing is when I put in a wrong password it starts "connecting..." but then hangs causing Sys Prefs to stop responding. I either have to cancel the connection or force quit Sys Prefs.
    Steps already taken:
    - Deleted all the Keychain passwords for the TC
    - Reset the TC both by using the menu option and push button power cycle
    - I have tried using the "Time Capsule password" option for file sharing
    It does the same thing with other external drives connected via the USB on the TC. However, that same external drive connected directly to the computer USB port works just fine and the icon stayed as the TM clock icon.
    It just does not want to the connect to the TC drives!
    I have read about the firmware being the problem, but how do I revert to the previous FW version for the TC?
    This is going to be stupid not being able to use the TC drive to do the backups, but for the meantime I am using the external drive connected via USB 2.slow!
    Thanks in advance!

    Ok. I got it to work, sort of....
    As I mentioned before I tried the "disk password" and the "Time capsule Password" options to see if I can start the back up again or start a new backup. Neither worked. So I tried the firmware down grade, but like you said that did not work. I then decided to try the "Account password" option and I have never used this option before becasue it states that if there is data on the drive it would not be acessable after creating an account. Since I wiped out the disk that was nno problem. When I created the new account and choose the drive it asked for the user name and password. I entered the info for the new account I just created(FYI this has nothing to do with your login username and password), bingo! It worked!
    Now I have two partitions on the TC disk. The old one and now the new account. I am guessing this is to be used if I have multiple computers, which I don't.
    I any case, I am going to wipe out everything again and try again to do a backup the way I had it before.

  • Skype isn't asking for password while starts

    Hi. My Skype is started manually and it is not asking me for password. How can I turn this feature on?
    Thanks 

    Just Sign Out first (menu Skype >> Sign Out), then uncheck the box for Skype autologin option
    CONTACT SKYPE CUSTOMER SERVICE   |  HOW TO RECORD SKYPE VIDEO CALLS  | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES   |  WINDOWS PROBLEMS TROUBLESHOOTING   |  SKYPE DOWNLOAD LINKS  
    MORE TIPS, TRICKS AND UPDATES AT
    skypefordummies.blogspot.com

  • My 5s won't ask for password to connect to Wifi

    I got my iPhone 5s today, went back to my office and tried to connect to my WiFi. It asked for my password, I input it incorrectly, it notified me of that, kicked me back out, and now when I re-try to connect to my WiFi it finds it, I try to connect, and it tells me it fails without ever asking for the password. I obviously cannot get in without the password so if it never asks I am locked out.
    I have re-booted both the router and the phone, nothing. Still won't ask for the password. Just got through with loading the software update IOS 7.0.0.1 and no help. Any ideas?

    Click on the exclamation mark next to the network that you want to change the password. Then click on Forget This Network. Go back and turn WIFI off, then back on. Your network will again appear and when you connect you will be asked for a password.

  • New Dashboards 4.0 ask for passwords while editing old xlf version

    Hello,
    While trying to edit an old xlf in the new xelsius version (4.0) the solutions is asking me for unprotect sheet and is telling me to put a password that I don't know. Why is happening this? How is the best way for editing old xlf versions. I thought I have to open the xlf and save it with the new version.
    Thanks
    Regards
    SU

    If you need to increase or decrease the size of fonts and other elements in the user interface and web pages then you can increase the String pref layout.css.devPixelsPerPx from 1.0 to 2.0 in 0.1 or 0.05 steps to see what works best.
    In current Firefox versions this pref is a String value parsed to a float and allows to fine tune the dimensions of all elements (user interface and web pages) more precisely.
    See:
    * http://kb.mozillazine.org/about%3Aconfig
    If you need to increase (or decrease) the font size on websites then look at the NoSquint or Default FullZoom Level extension.
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592
    * Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/162063/

  • Wrong User name or Password while connecting from SAP Business One - PL26

    I have restored my database on the server.I am using Patch Level PL26
    I am getting an error while logging to Server
    Wrong username and password....Message [131-93]
    Is it because i have not imported the Temporary Liscence.But when i work on my laptop, it doesnt give me an error with the same username and Password.
    I have checked SAP B1 Suite Service Manager also......it is "ON".
    Can you please give me an help on this issues, why is it giving this error
    OR
    Is there a problem in my SAP Business One Server installation
    Steps i have followed to install the SAP Busines One Server
    1 - PL26 - Packages - Server Tools - Setup
    2 - SAPB1 - Packages - Server - Setup (Custom - Demo-India
    3 - Client - setup
    4 - PL26 - Packages - DIAPI - Setup
    Not installed -
    5 - Packages - Upgrader Common - Setup
    Reason - I have been told that until and unless you import liscense, you cannot run Upgrader Common Setup.
    Please if you can find out is this true ?
    Is the problem coming because i have not run the Upgrader Common setup ?

    Hi Khimesra,
    Could you please try the following:
    1 - Firewall/antivirus disabled                                   
    2 - B1 uninstalled                                                
    3 - Net 1.1 installed                                            
    4 - B1 reinstalled                                                
    Please also refer to the following SAP notes:
    546344 and 542690
    Regards
    Emanuel

  • Invalid Username / Password while connecting to a Wi-Fi network

    Hi,
    I cannot connect to the wi-fi network from the Hotel. On the first day it worked perfectly, today it didn't.
    It is not a secured (WPA) wifi but after the connection, need to open the browser to enter login and password.
    I have a laptop that is connected to the same wi-fi and it is working.
    Checked several times login and password, tried to forget network and the reconnect, tried to turn the cell off and then turn it on.
    Any suggestions?

    When you are connecting through a hotels WiFi like this they may occasionally require you to login via a home web page, this is quite normal. In many cases the password for this will be provided at checkin and with this being the case it would be worth speaking with the front desk to see if they can assist you with this.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

Maybe you are looking for

  • Can I retrieve data from a multiple select query?

    I recently have been able to consolidate many queries into one large one, or into large compound queries. I found an instance where I am using a select query in a for loop that may execute up to 400 times. I tried building a huge compound query, and

  • SID error in XI sysytem

    hai friends iam trying to create 2 SID's in one single system . 1 for devlopment 2nd for production . is it posible to create 2 sid's for one single system if it is posible pls tell me how to do this one . OR any other way to maintain this devlopment

  • Can't create web photo gallery with modified RAW files

    I can use CS-2 to create a web photo gallery using unmodified RAW files, this seems to work fine. However, after I tweak the exposure of a RAW file and a .xmp file has been created, if I try to create a web photo gallery, the program goes through the

  • Deleted Printers & server-error-service-unavailable error

    If anyone is having trouble with this after updating to OS X 10.4.8. I updated to 10.4.8 on 5 different macs and every single one of them had this problem. This might have been discussed here before, but I thought I should make it known along with th

  • Data migration/cutover inputs

    Hi friends, need some help with lsmw/bdc templates to upload master/operative data.. wanted to check if anyone could send some links/samples across.. also, if any info on std. BAPIs available in facilitating the process.. thanks in anticipation..