Windows 8.1 driver for P1505

Hi,
On your printer support download page, I found an update for my driver but the installation stalls to 1/3 after less than 10 seconds.
I tried to install a least three times to no avail.
My portable pc is only a year old and powerful but now running Windows 8.1.
Is there anything wrong with this update?
HP LaserJet P1000-P1500 Hostbased Plug and Play Basic Driver
Thanks for checking.
jljric

Since AMD did not intend to provide Win8.x support for the 760GM chipset thus drivers weren't available.
The final support is Win7.

Similar Messages

  • I need a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 11-h003sa x2 PC

    Can you please tell me where I can download a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 11-h003sa x2 PC
    It's the only device that Windows 8.1 can't find a driver for - I've tried to update the driver software in Device manager for it and it doesn't find anything.
    Thanks in advance
    This question was solved.
    View Solution.

    Hi:
    Try this Intel chipset driver...
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng
    If the auto install file doesn't work, download and unzip the second file listed (zip file).
    Go to the device manager and click on the smbus controller needing drivers, click on the driver tab.  Click on Update Driver.
    Select the Browse my computer for driver software option and browse to the driver folder that was created when you unzipped the file.
    Make sure the Include Subfolders box is checked and see if the driver installs that way.
    For the mouse pointer problem try reinstalling the touchpad drivers.

  • I need a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 17-f208ng

    Can you please tell me where I can download a Windows 8.1 driver for SM Bus Controller on a HP Pavilion 17-f208ng
    It's the only device that Windows 8.1 can't find a driver for - I've tried to update the driver software in Device manager for it and it doesn't find anything.
    Thanks in advance
    PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C&REV_03\3&11583659&1&FB
    PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C&REV_03
    PCI\VEN_8086&DEV_9CA2&SUBSYS_2297103C
    PCI\VEN_8086&DEV_9CA2&CC_0C0500
    PCI\VEN_8086&DEV_9CA2&CC_0C05
    This question was solved.
    View Solution.

    Hi:
    Download and install the Intel chipset driver from the link below.
    https://downloadcenter.intel.com/download/20775/Intel-Chipset-Device-Software-INF-Update-Utility-
    The second file on the list is the auto install file.

  • Windows 8.1 Driver For MSI 760GM-P21

    My Motherboard is MSI 760GM-P21. My Motherboard has build in ATI Radeon 3000 Graphics Adapter. I Want Windows 8.1 Driver For ATI Radeon 3000. Is It possible To Get The Windows 8.1 Driver For ATI Radeon 3000 ?....

    Since AMD did not intend to provide Win8.x support for the 760GM chipset thus drivers weren't available.
    The final support is Win7.

  • Need Windows 7 WiFi driver for Compaq nx7010

    Were can i get Windows 7 WiFi driver for Compaq nx 7010

    Curt try here.
    http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=6&Level=5&Conn=4&DownTy...
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • WINDOWS 2008 R2 DRIVER FOR OFFICEJET 4610 ALL IN ONE PRINTER

    i am using hp officejet 4610 all in one printer. I need windows 2008 r2 driver for this.
    please help
    saleem

    Hello Saleem,
    Welcome to the Forums
    I have checked the available drivers for your Officejet 4610 and did not see an available driver for Windows 2008 R2. I will post you the link to the drivers that are available below.
    HP Officejet 4610 All-in-One Printer Drivers
    Best wishes,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Windows 7 beta driver for the Creative N400

    Hi everyone,
    There is a Windows 7 beta driver for the Creative N400 speakers system.
    Creative Speakers Beta Driver 1.02.000
    Filesize : 24.68 MB
    Release date : 13 Apr 09
    File Name : USPK_W7DRVBETA_US_1_02_000.exe
    This download is a beta driver providing Microsoft Windows 7 Beta support for certain Creative speakers. For more details, read the rest of this web release note.
    Take note of the following:
    * THIS IS AN UNSUPPORTED BETA DRIVER. There is no technical support for this driver.
    * We recommend that only experienced users install this driver. Do not install this driver on a system used to perform critical tasks.
    * Users who are looking for stable drivers should wait for the final release. When this happens, user should install the latest Creative driver available.
    This download supports the following devices only:
    * Creative N400
    Requirements:
    * Microsoft Windows 7 Beta
    Notes:
    * To install this driver
    1. Download the .exe file onto your local hard disk.
    2. Double-click the downloaded file.
    3. Follow the instructions on the screen.

    Sorry but this information is not available at this time. If there is any updates, you will see it in the announcement page.

  • Where can I download a Windows 7 64bit driver for the hp CDDVDW TS-L633N on my cpq60-615DX

    EDIT --
    I neglected to say that I tried updating the driver from the Device Manager device window and the result was a message saying it could not find a newer driver, that the one installed was correct.
    Another EDIT
    I also did not say that I  have uninstalled the device, through Device Manager. Upon restarting the system, the drive was found and software installed but the problem remains.
    Original message follows:
    System: CPQ60-615DX
    Windows 7 Home Premium 64bit
    Drive: hp CDDVDW TS-L633N
    In the process of installing some Roxio software, Creator 9, an unusable driver, are part of one, was installed. Now the device is not working.
    When I didn't see on the list of devices on Windows Explorer, I went to Device Manager and found that it was flagged with the "problem" icon (exclamation  point on a yellow background).
    The General Tab Device Status box contains"
    A driver (service) for this device has been disabled.  An alternate driver may be providing this functionality. (Code 32)
    The following information is shown for the device:
    hp CDDVDW TS-L633N ATA Device Properties windo
    Driver Tab:
    hp CDDVDW TS-L633N ATA Device
    Driver Provider: Microsoft
    Driver Date:     6/21/2006
    Driver Version:  6.1.7601.17514
    Digtal Signer:   Microsoft Windows
    Driver File Details:
    hp CDDVDW TS-L633N ATA Device
    Driver files: c:\Windows\system32\Drivers\cdrom.sys
    Provider:         Microsoft Corporation
    File Version:     6.1.7600.16385 (win7_rtm.090713-1255)
    Copyright:        Microsoft Corporation. All rights reserved.
    Digital Signer:   Microsoft Windows
    c:\Windows\System32Drivers\PxHlpa64.sys
    Provider:         Sonic Solutions
    File version:     2.03.27a
    Copyright:        Copyright 2003 Sonic Software
    Digital Signer:   Not digitally signed
    It appears that the Creator install installed part of the driver but not one that functions. It might be a problem with Windows 7 or the fact that this install is 64 bits.
    I have searched the HP site and can't find a driver for the device. When I look at the list of drivers available for this system, the optical drive is not shown.
    I downloaded and installed the HP driver search program - or whatever it is called - and ran it. There were no devices listed on "Optical Drive" tab when I looked at the results - it could not "see" the drive.
    I realize that what I need is probably a generic driver from MS, that's why one is not shown on the HP site, but how do I go about finding the right one for this device?
    Is there a generic "one size fits all" driver for Windows 7 which can drive this device?
    Any assistance will be greatly appreciated.
    Bob and Simon
    This question was solved.
    View Solution.

    HI nhgfdstr:
    Thank you for your inquiry.  I am pleased to assist  you!!
    I am sending you a link to a "CD/DVD Drive Is Not Detected (Windows 7)"  click here.  For your convenience here is a document on "Downloading or Updating Software and Drivers for HP Computers"   click here.   I am also sending  you  a link, to third party site, with a driver for your hp CDDVDW TS-L633N ,  " Hp CDDVDW TS-L633N ATA Device Drivers Download"  click here.
    Happy Holidays!!!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Best Windows version and drive for my Mac Pro?

    I am looking to purchase an new internal drive for my new mac pro exclusively for the purpose of installing windows and playing pc games via BootCamp. Questions: Which drive will work best for this?(looking for 500GB or less) and which version of Windows will be more reliable and perform best (XPpro, XPhome, Vista) in my system? Thanks!!

    Hi:
    I just had exactly the same situation- I looked at different hard drives and bought the Western Digital Caviar Black WD6401AALS from Buy.com for about $78.00. Incidentally when you look at the prices of these products , the range is very tight- just $9 get you an additional 140 gigs and the black series is much faster than the SEII series for only a slight increase in cost. The drive is fast and quiet.
    I tried using boot camp to install Vista ultimate and got a series of formatting error messages, then pulled out my mac OS drive, installed Vista without any trouble at all, then installed the drivers to be used with the mac pro and boot camp for windows. Works great so far. Then I reinstalled the mac os hard drive and now can boot into windows or mac. The 64 bit version of vista ultimate is very fast on the mac pro (2008 version).

  • Windows 8 Printer Driver for HP Color LaserJet 1600

    Trying to get my printer back up and operating with the Windows 8 operating system.  I am not finding the Driver for the HP Color Laserjet 1600.  can anyone help

    The driver for this device should be available around the end of Jan. 2013. Please bookmark this site for update information.
    Windows 8 Support for Laserjet products
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

  • Windows 7 64bit driver for HP 1280 deskjet

    Hi can anyone please supply me with a link where I can download a driver for my HP 1280 printer. for windows 7.
    Thx andre
    This question was solved.
    View Solution.

    Grrrrrrr SOOOOOOOOOOO frustrated!!!!
    FInally find something in the forum to connect my 1280 and it won't load (albeit by a hp employee but not on behalf of hp)!  Has it been removed?
    So fed up of restarting my laptop & printer and adding and removing.  Updating Windows etc etc etc - spent £100 on hp  printer ink and can't get my A3 1280 printer to work with my all singing all dancing laptop!!!!
    Printer still works on my old dog of a PC but what use is that when I've retired the old dog!  
    Have spent sooooo many hours trying to resolve, and finally think I'm getting somewhere and stalls!!!  Grrrrrrrrrrrrrrrrrrrrrr 
    ONE VERY FRUSTRATED PUPPY!!!

  • Where can I get a Windows 7 64bit driver for my LaserJet CP1215?

    According to the product info, my LaserJet CP1215 is supported under Windows 7 64bit:
    http://h10025.www1.hp.com/ewfrf/wc/document?docnam​e=c01539618&lc=en&dlc=en&cc=us&product=3422476#N10​...
    But the driver package available for download is the same whether I select 32- or 64 bit Windows 7.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3422​...
    Needless to say, it is not working...although there are no error messages on installation or anything else. See http://h30434.www3.hp.com/t5/Home-Web-Printing/Las​erJet-CP1215-wont-print-gets-unspecified-error-on-​...
    So what do I do, to print to this printer on Windows 7 ??
    Help appreciated!

    I'm seeing different 32bit and 64bit packages.
    ftp://ftp.hp.com/pub/softlib/software10/COL22389/l​y-59012-2/ljcP1215-HB-pnp-win32-en.exe
    ftp://ftp.hp.com/pub/softlib/software10/COL22391/l​y-59118-2/ljcP1215-HB-pnp-win64-en.exe
    Suggest you try the latter link.
    Found the information here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategor​y?lc=en&dlc=en&cc=us&lang=en&os=4063&product=34224​...
    You're lucky - HP didn't even bother to make a Windows 7 driver for my HP 1010.
    Cheers,
    Peter

  • Windows Server 2008 driver for LaserJet 4100 with envelope printer

    I have a new Windows 2008 Server 32 and a handful of HP printers.  I need a driver for the LaserJet 4100 with an envelope feeder.  The universal driver doesn't appear to recognize (or give an option to find) the envelope feeder.  The old drivers I used on the previous server won't install on the 2008 box.
    I can;t be the only person with an envelope feeder on this machine. Can anyone help or point me in the right direction?
    Thanks
    Jeff

    I'm afraid I'll have to refer you to the Business Support Forums for further help. They're more well-versed with Laserjet printers.
    Business Support Forums 
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • Third party windows 8.1 driver for VMSpc Version 3.0

    I purchased a HP Stream 7 to use as an engine monitor for my motorhome. The tablet will not recognize the driver for the JIB. I have the latest driver and it installs perfectly on my Pavilion x2 with the same operating system. Nothing seems to work with the tablet.  It appears to install manually without the JIB connected. Once I plug it in it states the software cannot load. The software is VMSpc from Silverleaf Electronics. Any help out there? I can use the Pavilion for the project but really want to use the stream 7 due to it's size.
    Thanks,
    Donald Tomlin

    Yes, the jib connects by USB and I used a combination OTG cable to connect the power, GPS and USB to the same port. I have the program installed on half the screen and Delorme Street Atlas with GPS on the other side so that both are on the screen at the same time. Works great in all respects except for the driver issues so no engine data at this time but it looks cool. Also ordered a window mount for the PC so I can mount it like a Garmin. May be a problem with the Atom processor used in the PC.?

  • Windows 7 video driver for m8000n Vista PC

    Hard drive died so installed new and did fresh install of win 7 pro. Need updated video driver for hdmi card. Can't find it.

    Hi,
    No driver for Windows 7 from its homepage. Please go to the following site and use option #2.
        http://www.nvidia.com/Download/index.aspx?lang=en-us
    Hope this helps.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • 3.0.04.34 BUG?: Connections not imported from 3.0.03.97

    On start-up after selecting "Yes" in the Import Preferences dialog, connections used in previous version are not transferred. Connections were imported using manually selected prefs from 2.1.1... SQL Developer 3.0.04.34 Java 1.6.0_24 Mac OS X 10.6.7

  • WiFi connection problem solved

    My intel iMac and MBA had no problem but iPods 3g and 5g did.  I had an old Netgear router connected and sitting next to my Airport Express.  On a hunch I diconnected the Netgear and created a guest network to replace the one on the Netgear.  PROBLEM

  • Adding one field in selection-screen in rfitemar

    hi experts 1)  I am converting the rfitemar to z or y program after that i have to add one field   wbs element(projk) in selection screen. 2) The WBS Element values should be displayed in the output report ie one column which contain wbs element valu

  • Replacing HDD on macbook, don't have original disk.

    I just bought a late 2008 macbook, aluminum unibody.  But, it didnt come with the original disk.  I believe it is currenly running oxs 10.9.1.  I have a retail copy of snow leopard.  but i believe it originally had leopard on it.  From everything I h

  • Looking for some advice on what to do now.

    I've spent every free moment working between flash, fireworks and  illustrator for awhile now.  I've spent every evening after work working with lynda.com tutorials.  It's been great.  My goal was to learn all the basics of web site design.  I even c