Windows 8.1 Easy Transport

I want to transfer files from my Windows 7 PC to my Windows 8.1 laptop. Both are connected to the same ISP's router. The ISP only allows IPv4 addresses.
Using Windows 7, I start Windows Easy Transfer and ask for a network transfer and select 'This is my old computer'. It gives me a 7 character key which I should enter into my Win 8.1 Easy Transfer.
Unfortunately, in Win 8.1 Easy Transfer I have only 2 available answers to the question "Have you already used Windows Easy Transfer to save your files from the other PC?
1. If you've saved your files to an external hard drive or USB key, connect it now.
2. If you haven't, go to the other PC and do it now.
I don't get any option to enter the key from my Win 7 PC.
I have a cross-over network cable if that's of any use? How do I transfer the data?

Hi,
I am having same issue.
In my case, I just setup a Win Server 2012 Essentials on my network, and just connected the first PC running Win 8.1 Preview.
Now when I logged in after connector software install and a restart, I was shown a message that I need to start Windows Easy Transfer, and select my local user account in it, and it will make the data file on my USB flash disk. Then I can re-run the tool
again from the network user's account and import the data back on same PC.
But the problem is, when I run the WET tool and press Next, it only shows two options to this question:
"Have you already used Windows Easy Transfer to save your files from the other PC?"
If you've saved your files to an external hard drive or USB key, connect it now.
If you haven't, go to the other PC and do it now.
When I select the 2nd option, the tool just exits. When I select the first option, it asks me to provide previously made MIG file.
Can anyone tell me how WET suppose to work? Do I need to download and run some other tool?
Thanks,
// chall3ng3r //
www.orison.biz/blogs/chall3ng3r/
WET works by creating a set of user data for a computer. Then the new computer accesses that target file and imports the user data.
You must first go to the A computer and create it. I mentioned above to use the selective mode to capture everything except apps unless you have installed exactly the apps on the new computer. You save this file to an external device or separate HDD or partition.
Now, when you run it on the "new" computer or "B" computer it has a target file to access. The message that you are getting is telling you that it has
no target file to work with.
What account do you want to import? One from the 8.1 computer? Just type Easy Transfer on the 8.1 computer select it and run it.
Where do you want to create the account? On the server or another client? Now run it and point it to the file that you created on the 8.1 computer.
Here is a help link
How to use WET in Win 8

Similar Messages

Easy print not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1

Easy print is not working on a 64 bit Windows 8.1 client with Remote Desktop connection version 8.1 . Printers dont get redirected when you connect to the terminal server. The server we are connecting to has Windows 2008 server. On 32 bit Windows
7 and windows XP clients Easy print is working fine and printers get redirected in terminal server.

I am having the exact same problem. Windows 7 works fine, but 8.1 will not redirect printers. Others said to check local policy terminal services settings and my setting are all set as they should.
I think Windows 8.1 is not telling the terminal server what printers it has.

When I view application windows, but then cancel from this view I am moved to another open window from the application on a different desktop space. How can I prevent this from happening?

Hi Everyone!
I'm new to Mac, and I'm a bit unsure of how to handle a problem I'm having with application windows.
Here's the scenario:
On one space I have a bunch of PDF's open in Preview next to the document I am working on. On another space, I might have an unrelated PDF open and an image, also open in Preview. Now, say I use the Application Windows button to view all my open PDF's on the first space, but then discover I haven't got the PDF open, so I need to open in in finder. The moment I quit out of the Application Windows view I am transported to another desktop containing an open Preview window! This happens with other applications too, like if I trigger application windows on pages instead of preview and need to cancel, I get transported off to some other open pages document.
This is insanely infuriating, how can I stop it!
Thanks for your time.

See Recover your iTunes library from your iPod or iOS device.
tt2

Why does itunes freeze up windows/PC but work fine on mac?

Yes itunes is apple but why make it so bad on PC and fine on mac? not everyone has the money for mac. And school wise windows is much easier than mac. One of my friends is stupid enough to rely on pages for everything but when we need to use excel or publisher she cant figure out how to do things so she either goes to the library in precious sleep time before school, or during lunch and recess, etc; OR she uses my laptop before school which I find quite annoying moving it from my morning mess down to another room. Seriously if Apple is trying to get more people to buy macs ITS NOT F*CKING WORKING!!!! It's just making me ****** at having to wait 10 hours and lose most of my sleep trying to do a recovery of my ipod coz it took too long to sync and kept stuffing up my laptop. And now i cant have any decent games because it will freeze up my perfectly fast and relativly new laptop (few months old). This also happens on all other windows in my household and my friends also complain. BTW I am not a noob. I'm actually really good with technology and gaming though my appearance suggests otherwise.

Around these parts - yes resync is a word.
The waiting icons are appearing in the iPad correct? If so, finish the downloads in iTunes on your computer and then try to sync the apps. Don't connect the iPad when you do this - just try to finish the downloads in iTunes.
Where can you see your music? In the music app itself on the iPad?

How to install The Soundblaster Audigy SE in Windows 7 RC?

:How to install The Soundblaster Audigy SE in Windows 7 RC?Y Two days ago I bought a Soundblaster Audigy SE-retail soundcard. I have a dual boot PC with Windows XP-SP3 and Windows 7 RC. The installation of the soundcard?in Windows XP was easy, no problems, good sound.
But how to install in Windows 7 RC ?
I have the installation and applications CD with XP and Vista drivers and I have the driver-download from Creative.com SB24PCDRV LB 0 - 04 - 0090.
Windows 7 tells me "No device for audio output is installed". Windows automaticly?installed a driver, but that doesn't work. (code 39). The driver download from?creative does not install new drivers and when I try it manually Windows tells me "The best driver is already installed"
When I uninstall?the driver that Windows installed and try to install the downloaded?creative driver for Windows 7, the driver will not install, and Windows message is something like "?no audio device is installed on this computer"
What to do ? A computer without sound is nothing...
Thanks,
Arie

>Re: How to install The Soundblaster Audigy SE in Windows 7 RC?% Meocene is 00% on the money. Dan K.'s pack is the best. I have used the pack on four different systems with AUDIGY LS and SE cards that I bought cheaply (all four on Ebay for $40). The package has worked under XP, Vista, and Windows 7 very well.
I have friends that play Left4Dead and they have been immensely pleased when playing the games in their flats with or without headphones, as compared to their old "onboard RE--t-k" sound.
The package also works well on a Gateway or HP machine when disabling onboard audio first then installing the Audigy and installing drivers and apps for the first time. Gi've up on using your old CDs, you will only run into a mountain of trouble trying to "Auto-Update" all that with the newest patches.

I upgraded Firefox, and now there is a blue band on my screen above the window, and I'm not getting the full use of the screen in viewing web pages. How can I get the window to expand to fill the screen as it did before?

There is a horizontal band or gap above the Firefox window at the top of the screen, where you can see the Windows desktop behind the Firefox window. On the left side of this band are the window tabs, and the menu bar, and another bar with the names of the open windows. I would like to have the Firefox window expand to fill the entire screen, like it did before the upgrade. Thanks.

Do you mean running Firefox in full screen mode?
*https://support.mozilla.org/kb/how-to-use-full-screen
If you are in full screen mode then you can hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.
*https://support.mozilla.org/kb/how-to-use-full-screen
You can also run Firefox in a maximized window to have easier access to the Menu bar and Navigation Toolbar.

FLV Playback and Seekbar on different native windows in one Air application

Hello Everyone. I'm trying to make a simple video playback AIR application that utilizes the initial native window to house a transport control with a seekbar on it. Once the application launches, it creates a second (new) window on my second screen and places a FLVPlayback instance on that new window. Everything works just like it want it to except for one thing. When the seekbar and FLVplayback instance are not located on the same window stage, the seekbar handle sticks to the mouse when trying to scrub through the video.
I've added both the transport control and the FLVPlayback instance to the original native window as children and I have also added both of them to the new window as children and everything works just fine. It's only when they are separated and located on different stages that the seekbar acts up. When they are on the same stage, I can click on a point on the seekbar and the video jumps to that spot and continues to play and I can also scrub the seekbar, the video updates as I scrub, and when I release the mouse, the seekbar handle stays where I released the mouse. When they on separate stages, the seekbar handle continues to follow the mouse movement without releasing it. The video updates as the seekbar handle is moved due to it sticking to the mouse, but if I release the mouse, the handle is still moving with the mouse and the video is still being scrubbed. Like I said, everything works great except for this and I have reached my limit with time spent on this issue. Does anyone have any insight into this?
Here's my code for the project. This is my first AIR application, so I am coding it as I am learning, please be kind.
import fl.video.*;
import flash.display.*;
import flash.desktop.*;
import flash.events.*;
import fl.video.MetadataEvent;
import flash.geom.*;
import flash.ui.Mouse;
import flash.text.*;
GLOBAL SETUP
var flvControl:FLVPlayback;
var MasterWindow = stage.nativeWindow;
var screen1:Screen = Screen.screens[0];
var screen2:Screen = Screen.screens[1];
MASTER WINDOW SETUP
this.loaderInfo.addEventListener(Event.COMPLETE,maximize);
transControl.playPauseButt2.addEventListener(MouseEvent.CLICK, PlayButton);
if (Screen.screens.length > 1){
          createVideoBKG();
          createVideoPlayer();
GENERAL FUNCTIONS
//Maximize the initial screen
function maximize(e:Event) {
          MasterWindow.x = screen1.bounds.left
          MasterWindow.maximize();
          MasterWindow.stage.scaleMode = StageScaleMode.EXACT_FIT;
//Hide Mouse Behind Video Window On Roll-Over
function MouseRollOver(e:MouseEvent):void
          {          Mouse.hide()          }
function MouseRollOut(e:MouseEvent):void
          {          Mouse.show()          }
//Play-Pause Button Control
function PlayButton(event:MouseEvent):void
                    if(transControl.playPauseButt2.currentFrame==1 ){
                              transControl.playPauseButt2.gotoAndPlay(2);
                              flvControl.play();
                    else {
                              transControl.playPauseButt2.gotoAndPlay(1);
                              flvControl.pause();
function CloseWindow(e:MouseEvent):void
                    NativeApplication.nativeApplication.openedWindows[2].close();
VIDEO BKG SETUP
function createVideoBKG(e:Event = null):void{
          var newOptions:NativeWindowInitOptions = new NativeWindowInitOptions();
          newOptions.type = NativeWindowType.LIGHTWEIGHT;
          newOptions.systemChrome = NativeWindowSystemChrome.NONE;
          newOptions.transparent = true;
          var videoBKG:NativeWindow = new NativeWindow(newOptions);
          if (Screen.screens.length > 1){
                    videoBKG.x = screen2.bounds.left;
          videoBKG.maximize();
          chromeSetup(videoBKG);
          videoBKG.activate();
//Video BKG Chrome Setup
function chromeSetup(currentWindow):void {
          var vidBKG = new video_bkg();
          vidBKG.name = "video_bkg2";
          vidBKG.addEventListener(MouseEvent.ROLL_OVER, MouseRollOver);
          vidBKG.addEventListener(MouseEvent.ROLL_OUT, MouseRollOut);
          currentWindow.stage.addChild(vidBKG);
VIDEO Player SETUP
function createVideoPlayer(e:Event = null):void{
          var newOptions:NativeWindowInitOptions = new NativeWindowInitOptions();
          newOptions.type = NativeWindowType.LIGHTWEIGHT;
          newOptions.systemChrome = NativeWindowSystemChrome.NONE;
          newOptions.transparent = true;
          var videoPlayer:NativeWindow = new NativeWindow(newOptions);
          if (Screen.screens.length > 1){
                    videoPlayer.x = screen2.bounds.left;
                    videoPlayer.y = screen2.bounds.top;
                    videoPlayer.width = screen2.bounds.width;
                    videoPlayer.height = screen2.bounds.height;
                    videoPlayer.stage.scaleMode = StageScaleMode.NO_SCALE;
          videoPlayer.alwaysInFront = true;
          var DVR = new DVR_Player();
          DVR.name = "DVR";
          DVR.x = 0;
          DVR.y = 0;
          DVR.addEventListener(MouseEvent.ROLL_OVER, MouseRollOver);
          DVR.addEventListener(MouseEvent.ROLL_OUT, MouseRollOut);
          videoPlayer.stage.addChild(DVR);
            flvControl = DVR.display2;
          flvControl.width = 1280;
          flvControl.height = 720;
          flvControl.skin = null;
          flvControl.autoPlay=false;
          flvControl.isLive=false;
          flvControl.fullScreenTakeOver = false;
          flvControl.align = VideoAlign.CENTER;
          flvControl.scaleMode = VideoScaleMode.NO_SCALE;
          flvControl.source = "olympics.f4v";
          flvControl.seekBar = transControl.seekbarContainer2.seeker;
          videoPlayer.activate();

Does anyone have any ideas about this?

ITunes 7.6 and Windows XP Pro x64 ---- 64 bit version of Windows XP Pro

My wife was given an iPod nano, so I downloaded the current version of iTunesSetup.exe from www.apple.com and tried to run the executable. It told me that it wasn't designed to install iTunes on my 64 bit version of Windows XP Pro, and that I should go back to www.apple.com and download the 64 bit installer. I went back to www.apple.com and searched for the 64 bit installer in vain. There is only one main link to the current installer and the website determines which version of the installer you're given. After a few google searches I managed to aquire iTunes64setup.exe from the Apple site. I ran the executable and it told me "This iTunes installer requires that your computer is running Windows Vista 64-bit" and then it gave me the option to exit. I ended up installing iTunes from the executable I had originally downloaded. I have iTunes 7.6.2.9 installed now but it doesn't detect, or can't operate my DVD burner, so I can't rip music with iTunes for use on my wife's nano. I get this error report when I run the Diagnostic test built into iTunes.
"Microsoft Windows XP Professional x64 Edition Service Pack 2 (Build 3790)
System manufacturer System Product Name
iTunes 7.6.2.9
QuickTime 7.4.5
CD Driver Not Available
CD Driver DLL Not Available
Bonjour 1.0.4.12 (118.4)
iTunes Serial Number xxxxxxxxxxxxxxxx
Current user is an administrator.
The current local date and time is 2008-04-30 23:34:07.
iTunes is not running in safe mode.
Video Display Information
Standard VGA Graphics Adapter
NVIDIA GeForce 8800 GT
** External Plug-ins Information **
No external plug-ins installed.
** CD/DVD Drive Tests **
LowerFilters: Afc
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel."
And there was no change in the diagnostic when I first tried to repair the install and then tried to reinstall iTunes. I'm sure the burner is working because I can play music, watch movies and all the normal stuff a DVD burner can do using Nero.
I'm guessing I need an iTunes version of 64 bit optical drive driver.
Any help would be appreciated!
Cinder's
<Edited by Moderator>

I got the iTunes 7 to work on XP Pro 64bit. What I did was this:
1. Downloaded DriverInstaller_AMD64EM64T.exe
2. Installed it.
3. Created this file tree: C:\Windows\Sysnative\drivers (Easier terminology, I went into the Windows folder and created a folder named "sysnative", opened that folder and created another folder called "drivers".
4. Then I located the folder where I installed DriverInstaller_AMD64EM64T.exe ..
5. I took the file called GEARAspiWDM and COPIED IT. I DID NOT MOVE THIS FILE!!!
6. I pasted a COPY of this file into sysnative\drivers. The folder I just made.
7. I installed iTunes 7, not 7.6. 7.6 and this method won't solve the burning issue. That would require more programs and more patients.
Note, you will have to manipulate iTunes when you want to burn. The best way to do this, I found, was to simply make a playlist and right click the playlist on the left column and select burn to disk. It should act normally.
Message was edited by: Nexis

Blue screen error Windows 7 after June 2014 Windows updates

Hi,
just wondering if someone could help determine the cause of a blue screen error from interpreting the following minidump file. My PC has been having blue screen problems after getting the automatic windows updates recently. Initially the only way I could
get the computer working was to restore the system back to prior to the updates. The updates seem to have now successfully installed but are still causing occasional blue screen errors. I have Windows 7 Home Premium
The minidump is 061614-32666-01 andthe link is as follows:
https://onedrive.live.com/redir?resid=1665B282DEF2D2DC%21111
Any help would be appreciated

Hi,
just wondering if someone could help determine the cause of a blue screen error from interpreting the following minidump file. My PC has been having blue screen problems after getting the automatic windows updates recently. Initially the only way I could
get the computer working was to restore the system back to prior to the updates. The updates seem to have now successfully installed but are still causing occasional blue screen errors. I have Windows 7 Home Premium
The minidump is 061614-32666-01 andthe link is as follows:
https://onedrive.live.com/redir?resid=1665B282DEF2D2DC%21111
Any help would be appreciated
These crashes were related to memory corruption (probably caused by a driver).
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Since it is more likely to be a driver please run verifier first.
1-Driver verifier (for complete directions see our wiki here)
If verifier does not find the issue we can move on to this.
2-Memtest. (You can read more about running memtest here)
If you cannot boot after enabling verifier reboot into safe mode
In Vista & win & (F8)
In win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Windows 7 blue screen on Mid 2010 iMac running 10.8

I had previously had the 64 bit version of Windows 7 Home Premium running on my mid 2010 iMac running 10.7. However, after upgrading to 10.8, my Windows installation would blue screen after booting. I suspect this was due to upgrading to 10.8 as I didn't make any changes to my Windows install because I only use it for gaming.
I've since removed the Windows partition, and tried a clean install via the Boot Camp Assistant. Windows installs just fine and boots cleanly. However, after installing the Apple Boot Camp drivers (freshly downloaded during the Boot Camp Assistant process), Windows blue screens upon booting. I can repair the Windows install using the built in process, but any attempt to install Apple's drivers results in blue screening. I've tried a clean Windows install and redownloading Apple's drivers several times with no luck.
Does anyone else have any suggestions on how to resolve this problem? Thank you for your help!

I do see this. And I suspect Windows updates. Not Apple (though I would be the first to suspect those too).
iMac graphic drivers for Windows seem touchy and common. The April Windows monthly patch updates hit a few iMac users.
One person found that if they only did updates in smaller steps and not all at once they were fine.
Tuesday this week was another Patch Tuesday.
Games, heat, disk blocks, even RAM errors - one person recently we went round and round... bad blocks not heat, new disk drive and they were 100% stable and rock solid but was hard to rule out. Windows though is easier to test RAM and sectors. And Lion was not even aware or sensitive to those bad sectors and read errors OR RAM errors that Memtest clearly showed (run in OS X).
One person had upgraded RAM, low and behold the new DIMMs were just not fully pushed in and seated and making good contacts.
Try to rule out hardware. Maybe you stumbled on bad block being used now. Run chkdsk if nothing else.
And when updating or preparing to, run Registry cleaner in CCleaner first, Go To %TEMP% and remove everything there. Make a system backup image to another disk drive (NTFS) or with WinClone 3 (HFS, $20) or CampTune ($20).
Or it could just be uninstall one driver at a time, start with GPU, look at what was last installed. Windows drivers are not desireable for GPU. Get the one from AMD or Nvidia instead.

Issue with VMware player - trying to install Windows 7 on a virtual machine

I'm currently using the basic version of VMware player (not the pro version)
I create a new virtual machine. VMware player automatically detects my Windows 7 bit installation disc
in my attached CD/DVD drive.
in the next screen, i select my operating system version and fill in my windows license key
then there is a progress bar with the title "creating disc" which takes about 10 minutes to complete
after installation, the virtual machine launches.
It says (white on black background)
Network boot from Intel E1000
PXE-E53: no boot filename recived
PXE-M0F Existing Intel PXE Rom.
Operating system not found.
on the bottom of the virtual machine window it says "easy install is installing Windows 7 64 bit",
however my CD/DVD drive is not spinning and there is no progress leaving this alone for 30 minutes.
I then rebooted the Virtual Machine and went into the bios to update the boot order
with the CDrom 1st, then the hard drive and then the network.
I still get the same errors.
I also tried the same process with my Windows Xp installation disc, same issues
Any advice would be appreciated

Jmattson, good idea I'll try the manual install. user "aka", I did check the bios, intel virtualization is enabled.

Windows 7 no longer boots after upgrade from Lion to Mountain Lion

I got a late 2011 MacBook Pro, on which I installed Windows 7 with Boot Camp. After I upgraded from Lion to Mountain Lion, I can no longer boot Windows. If I keep the option button pressed during boot I only get the OS X and recovery options, and if I choose to boot Windows from the system preferences pane, I get a message that says that no bootable device was found. However, I'm sure that the partition is still there, because I can see it in finder and browse the files normally. How can I boot Windows again?

"Easier" in this case as an alternative is defined as repartitioning/reformatting your disk, and restoring from backups (which for most people also means starting from scratch with Boot Camp Assistant and Windows since most users aren't backing that environment up).
What you did is, in my opinion, easier and faster. But if you don't know what you're doing can lead to data loss. But then, by definition, blowing away your disk and starting over with a restored backup begins with data loss!

[SOLVED] Can't boot Windows 8 using grub2. invalid EFI file path

English is not my native language. Please excuse typing errors.
I have just successfully installed Arch linux with grub2 as its boot manager. I
followed the arch beginner guide. I've used grub before and I'm familiar with
it, so chose to use grub instead for efistub. I installed os-prober and
ran grub-mkconfig to create the grub.cfg file. The problem now is that I recieve
an error when I try to boot windows 8. I have two drives (/dev/sda and /dev/sdb)
and I believe both are EFI-systems.
However, it's not very important for me to use grub, so if booting into windows
8 is easier using efistub, I will try that.
The computer is ASUS ux32vd with a hybrid disk with 25GB on the SSD and 500GB on
the hard drive. I believe the SSD part is used by Windows.
This is the first error I recieved when I tried to boot windows.
error: can't find command `drivemap'.
error: invalid EFI file path.
Press any key to continue...
Then I tried to follow this post
https://bbs.archlinux.org/viewtopic.php?id=150183 and made a new boot
entry "Windows 82". And I got a new error:
error: unspecified search type.
error: file '/EFI/Microsoft/Boot/bootmgfw.efi' not found
Press any key to continue...
Here are some command line outputs.
~ ᐅ sudo blkid
/dev/sdb1: PARTLABEL="HFS" PARTUUID="4613ee39-4727-4347-8134-173f590f716f"
/dev/sdb2: LABEL="INTELRST" UUID="BA5E-7431" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="304f2630-89b2-4632-a566-e8c6db9df3a9"
/dev/sda1: LABEL="SYSTEM" UUID="90FA-5332" TYPE="vfat" PARTLABEL="EFI system partition" PARTUUID="5a60fff2-384a-4168-ad7b-7ba25c03c910"
/dev/sda2: LABEL="Recovery" UUID="ECE43E9AE43E674C" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="5da02b32-607a-4c63-88ef-00499bd6e05c"
/dev/sda3: PARTLABEL="Microsoft reserved partition" PARTUUID="6c501a91-71a5-45d8-a9ee-2e2a1c427258"
/dev/sda4: LABEL="OS" UUID="DE4241E84241C5CD" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="6e182189-b0e3-479a-ac74-8e69452d7c66"
/dev/sda5: LABEL="DATA" UUID="B05448EC5448B6BE" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="be7e04ac-fb01-44fd-9571-e0b001652322"
/dev/sda6: LABEL="Restore" UUID="B8D84520D844DDEE" TYPE="ntfs" PARTLABEL="Basic data partition" PARTUUID="4d42c26d-2c85-4ebf-88ec-7a83a4814a61"
/dev/sda7: LABEL="ROOT" UUID="0d63036d-b624-4596-a296-1db457c068d5" TYPE="ext4" PARTUUID="707f4bca-18b4-4340-838f-ec3a39e9338a"
/dev/sda8: UUID="bcaa2c5f-150d-47c9-9a58-9a7b7ec7bed2" TYPE="swap" PARTUUID="1da43668-418c-4883-810b-e1c3dee75e61"
~ ᐅ sudo lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 465.8G 0 disk
├─sda1 8:1 0 300M 0 part /boot/efi
├─sda2 8:2 0 600M 0 part
├─sda3 8:3 0 128M 0 part
├─sda4 8:4 0 186.3G 0 part /mnt/windows
├─sda5 8:5 0 190.1G 0 part /mnt/data
├─sda6 8:6 0 20G 0 part
├─sda7 8:7 0 66.5G 0 part /
└─sda8 8:8 0 1.9G 0 part
sdb 8:16 0 22.4G 0 disk
├─sdb1 8:17 0 18.4G 0 part
└─sdb2 8:18 0 4G 0 part
~ ᐅ sudo cat /boot/grub/grub.cfg
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7 0d63036d-b624-4596-a296-1db457c068d5
else
search --no-floppy --fs-uuid --set=root 0d63036d-b624-4596-a296-1db457c068d5
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-0d63036d-b624-4596-a296-1db457c068d5' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7 0d63036d-b624-4596-a296-1db457c068d5
else
search --no-floppy --fs-uuid --set=root 0d63036d-b624-4596-a296-1db457c068d5
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=0d63036d-b624-4596-a296-1db457c068d5 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-0d63036d-b624-4596-a296-1db457c068d5' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7 0d63036d-b624-4596-a296-1db457c068d5
else
search --no-floppy --fs-uuid --set=root 0d63036d-b624-4596-a296-1db457c068d5
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=0d63036d-b624-4596-a296-1db457c068d5 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-ECE43E9AE43E674C' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 ECE43E9AE43E674C
else
search --no-floppy --fs-uuid --set=root ECE43E9AE43E674C
fi
drivemap -s (hd0) ${root}
chainloader +1
menuentry 'Windows 8 (loader) (on /dev/sda4)' --class windows --class os $menuentry_id_option 'osprober-chain-DE4241E84241C5CD' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 DE4241E84241C5CD
else
search --no-floppy --fs-uuid --set=root DE4241E84241C5CD
fi
drivemap -s (hd0) ${root}
chainloader +1
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
#menuentry "Microsoft Windows 8 x86_64 UEFI-GPT NTFS" {
#insmod part_gpt
#insmod ntfs
#insmod search_fs_uuid
#insmod chain
#search --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 DE4241E84241C5CD
#chainloader /EFI/Microsoft/Boot/bootmgfw.efi
menuentry "Windows 8" {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --no-floppy --fs--uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 90FA-5332
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
menuentry "Windows 8-2" --class windows --class os $menuentry_id_option 'osprober-chain-ECE43E9AE43E674C' {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --no-floppy --fs--uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 90FA-5332
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
~ ᐅ sudo grub-probe --target=fs_uuid /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
90FA-5332
~ ᐅ sudo grub-probe --target=hints_string /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi
--hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1
bootinitscript
Boot Info Script 0.61 [1 April 2012]
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> No boot loader is installed in the MBR of /dev/sdb.
sda1: __________________________________________________________________________
File system: vfat
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /efi/arch-grub/grubx64.efi /efi/Boot/bkpbootx64.efi
/efi/Boot/bootx64.efi /efi/ubuntu/grubx64.efi
sda2: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sda3: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sda4: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda5: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda6: __________________________________________________________________________
File system: ntfs
Boot sector type: Windows Vista/7: NTFS
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda7: __________________________________________________________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Arch Linux ()
Boot files: /boot/grub/grub.cfg /etc/fstab
sda8: __________________________________________________________________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
mount: unknown filesystem type ''
sdb2: __________________________________________________________________________
File system: vfat
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda _____________________________________________________________________
Disk /dev/sda: 500.1 GB, 500107862016 bytes, 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 1 976,773,167 976,773,167 ee GPT
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sda1 2,048 616,447 614,400 EFI System partition
/dev/sda2 616,448 1,845,247 1,228,800 Windows Recovery Environment (Windows)
/dev/sda3 1,845,248 2,107,391 262,144 Microsoft Reserved Partition (Windows)
/dev/sda4 2,107,392 392,816,639 390,709,248 Data partition (Windows/Linux)
/dev/sda5 392,816,640 791,449,599 398,632,960 Data partition (Windows/Linux)
/dev/sda6 934,809,600 976,773,119 41,963,520 Windows Recovery Environment (Windows)
/dev/sda7 791,449,600 930,902,015 139,452,416 Data partition (Windows/Linux)
/dev/sda8 930,902,016 934,809,599 3,907,584 Swap partition (Linux)
Drive: sdb _____________________________________________________________________
Disk /dev/sdb: 24.0 GB, 24015495168 bytes, 46905264 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 1 4,294,967,295 4,294,967,295 ee GPT
/dev/sdb1 ends after the last sector of /dev/sdb
GUID Partition Table detected.
Partition Start Sector End Sector # of Sectors System
/dev/sdb1 8,392,704 46,903,295 38,510,592 -
/dev/sdb2 2,048 8,390,655 8,388,608 -
"blkid" output: ________________________________________________________________
Device UUID TYPE LABEL
/dev/sda1 90FA-5332 vfat SYSTEM
/dev/sda2 ECE43E9AE43E674C ntfs Recovery
/dev/sda3
/dev/sda4 DE4241E84241C5CD ntfs OS
/dev/sda5 B05448EC5448B6BE ntfs DATA
/dev/sda6 B8D84520D844DDEE ntfs Restore
/dev/sda7 0d63036d-b624-4596-a296-1db457c068d5 ext4 ROOT
/dev/sda8 bcaa2c5f-150d-47c9-9a58-9a7b7ec7bed2 swap
/dev/sdb1
/dev/sdb2 BA5E-7431 vfat INTELRST
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda1 /boot/efi vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/sda4 /mnt/windows fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)
/dev/sda5 /mnt/data fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096)
/dev/sda7 / ext4 (rw,relatime,commit=600,data=ordered)
=========================== sda7/boot/grub/grub.cfg: ===========================
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7 0d63036d-b624-4596-a296-1db457c068d5
else
search --no-floppy --fs-uuid --set=root 0d63036d-b624-4596-a296-1db457c068d5
fi
font="/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
set timeout=5
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-0d63036d-b624-4596-a296-1db457c068d5' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7 0d63036d-b624-4596-a296-1db457c068d5
else
search --no-floppy --fs-uuid --set=root 0d63036d-b624-4596-a296-1db457c068d5
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=0d63036d-b624-4596-a296-1db457c068d5 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-0d63036d-b624-4596-a296-1db457c068d5' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt7'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt7 --hint-efi=hd0,gpt7 --hint-baremetal=ahci0,gpt7 0d63036d-b624-4596-a296-1db457c068d5
else
search --no-floppy --fs-uuid --set=root 0d63036d-b624-4596-a296-1db457c068d5
fi
echo 'Loading Linux core repo kernel ...'
linux /boot/vmlinuz-linux root=UUID=0d63036d-b624-4596-a296-1db457c068d5 ro quiet
echo 'Loading initial ramdisk ...'
initrd /boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Recovery Environment (loader) (on /dev/sda2)' --class windows --class os $menuentry_id_option 'osprober-chain-ECE43E9AE43E674C' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt2 --hint-efi=hd0,gpt2 --hint-baremetal=ahci0,gpt2 ECE43E9AE43E674C
else
search --no-floppy --fs-uuid --set=root ECE43E9AE43E674C
fi
drivemap -s (hd0) ${root}
chainloader +1
menuentry 'Windows 8 (loader) (on /dev/sda4)' --class windows --class os $menuentry_id_option 'osprober-chain-DE4241E84241C5CD' {
insmod part_gpt
insmod ntfs
set root='hd0,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd0,gpt4 --hint-efi=hd0,gpt4 --hint-baremetal=ahci0,gpt4 DE4241E84241C5CD
else
search --no-floppy --fs-uuid --set=root DE4241E84241C5CD
fi
drivemap -s (hd0) ${root}
chainloader +1
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
menuentry "Windows 8" {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --no-floppy --fs--uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 90FA-5332
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
menuentry 'Windows 82' --class windows --class os $menuentry_id_option 'osprober-chain-ECE43E9AE43E674C' {
insmod part_gpt
insmod fat
insmod search_fs_uuid
insmod chain
search --no-floppy --fs--uuid --set=root --hint-bios=hd0,gpt1 --hint-efi=hd0,gpt1 --hint-baremetal=ahci0,gpt1 90FA-5332
chainloader /EFI/Microsoft/Boot/bootmgfw.efi
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=============================== sda7/etc/fstab: ================================
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
# /dev/sda7 LABEL=ROOT
UUID=0d63036d-b624-4596-a296-1db457c068d5 / ext4 rw,relatime,data=ordered 0 1
# /dev/sda1 LABEL=SYSTEM
UUID=90FA-5332 /boot/efi vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro 0 2
LABEL=DATA /mnt/data ntfs-3g uid=sighol,gid=users,dmask=022,fmask=133 0 0
LABEL=OS /mnt/windows ntfs-3g uid=sighol,gid=users,dmask=022,fmask=133 0 0
=================== sda7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown GPT Partiton Type
5850cbb887c11947baf0379ca2d4c97e
Unknown GPT Partiton Type
dee2bfd3af3ddf11ba40e3a556d89593
Unknown BootLoader on sda1
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 5e 1b |.X.MSDOS5.0...^.|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 60 09 00 51 02 00 00 00 00 00 00 02 00 00 00 |.`..Q...........|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 01 29 32 53 fa 90 4e 4f 20 4e 41 4d 45 20 20 |..)2S..NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|[email protected]|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |[email protected]|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
Unknown BootLoader on sdb2
00000000 eb 58 90 4d 53 44 4f 53 35 2e 30 00 02 08 2e 20 |.X.MSDOS5.0.... |
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 00 08 00 00 |........?.......|
00000020 00 00 80 00 e9 1f 00 00 00 00 00 00 02 00 00 00 |................|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 00 29 31 74 5e ba 4e 4f 20 4e 41 4d 45 20 20 |..)1t^.NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 33 c9 8e d1 bc f4 | FAT32 3.....|
00000060 7b 8e c1 8e d9 bd 00 7c 88 56 40 88 4e 02 8a 56 |{......|[email protected]|
00000070 40 b4 41 bb aa 55 cd 13 72 10 81 fb 55 aa 75 0a |@.A..U..r...U.u.|
00000080 f6 c1 01 74 05 fe 46 02 eb 2d 8a 56 40 b4 08 cd |...t..F..-.V@...|
00000090 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 0f b6 |.s......f...@f..|
000000a0 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f b7 c9 |...?.......Af...|
000000b0 66 f7 e1 66 89 46 f8 83 7e 16 00 75 39 83 7e 2a |f..f.F..~..u9.~*|
000000c0 00 77 33 66 8b 46 1c 66 83 c0 0c bb 00 80 b9 01 |.w3f.F.f........|
000000d0 00 e8 2c 00 e9 a8 03 a1 f8 7d 80 c4 7c 8b f0 ac |..,......}..|...|
000000e0 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 cd 10 eb |..t.<.t.........|
000000f0 ee a1 fa 7d eb e4 a1 7d 80 eb df 98 cd 16 cd 19 |...}...}........|
00000100 66 60 80 7e 02 00 0f 84 20 00 66 6a 00 66 50 06 |f`.~.... .fj.fP.|
00000110 53 66 68 10 00 01 00 b4 42 8a 56 40 8b f4 cd 13 |Sfh.....B.V@....|
00000120 66 58 66 58 66 58 66 58 eb 33 66 3b 46 f8 72 03 |fXfXfXfX.3f;F.r.|
00000130 f9 eb 2a 66 33 d2 66 0f b7 4e 18 66 f7 f1 fe c2 |..*f3.f..N.f....|
00000140 8a ca 66 8b d0 66 c1 ea 10 f7 76 1a 86 d6 8a 56 |..f..f....v....V|
00000150 40 8a e8 c0 e4 06 0a cc b8 01 02 cd 13 66 61 0f |@............fa.|
00000160 82 74 ff 81 c3 00 02 66 40 49 75 94 c3 42 4f 4f |[email protected]|
00000170 54 4d 47 52 20 20 20 20 00 00 00 00 00 00 00 00 |TMGR ........|
00000180 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001a0 00 00 00 00 00 00 00 00 00 00 00 00 0d 0a 44 69 |..............Di|
000001b0 73 6b 20 65 72 72 6f 72 ff 0d 0a 50 72 65 73 73 |sk error...Press|
000001c0 20 61 6e 79 20 6b 65 79 20 74 6f 20 72 65 73 74 | any key to rest|
000001d0 61 72 74 0d 0a 00 00 00 00 00 00 00 00 00 00 00 |art.............|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 ac 01 b9 01 00 00 55 aa |..............U.|
00000200
========= Devices which don't seem to have a corresponding hard drive: =========
sdc {
=============================== StdErr Messages: ===============================
cat: /tmp/BootInfo-wSbit3X4/Tmp_Log: No such file or directory
/dev/sdc: open failed: No medium found
No volume groups found
mdadm: No arrays found in config file or automatically
EDIT:
I gave up trying to make grub work, so I uninstalled grub and deleted all the grub files I could find.
# pacrem grub-efi-x86_64
# rm -fr /boot/grub
That last one I came to regret later on. So I installed rEFInd using the archlinux beginners guide. When I then tried to boot into windows It told me that /boot/grub/x86_64-efi/normal.mod was not found. I then reinstalled grub-efi-x86_64 and copied /usr/lib/grub/x86_64 to /boot/grub. Now everything works fine.
Last edited by sighol (2013-06-08 21:47:49)

sighol wrote:However, it's not very important for me to use grub, so if booting into windows
8 is easier using efistub, I will try that.
The EFI stub loader is a Linux-only boot loader; however, it is possible to use the EFI stub loader in conjunction with a separate boot manager, such as rEFInd or gummiboot. In such a configuration, you'd use the boot manager to select the OS to boot (Windows or Linux, and possibly the specific Linux kernel), and the boot loader (the Windows loader or the EFI stub loader built into a specific kernel) will then take over booting the OS. In Arch, this is often easier to configure than is GRUB, since GRUB is very complex and its automated tools to help with setting things up often get it wrong.
This is the first error I recieved when I tried to boot windows.
error: can't find command `drivemap'.
error: invalid EFI file path.
Press any key to continue...
The "drivemap" command in GRUB is generally used when booting a BIOS-mode boot loader, and in fact your "Windows Recovery Environment (loader) (on /dev/sda2)" and "Windows 8 (loader) (on /dev/sda4)" GRUB entries are both built as for BIOS-mode Windows installations -- but the fact that your disks both use GPT means that Windows won't boot in BIOS mode on your computer. (This is one of the many things that the GRUB setup scripts can get wrong.)
Then I tried to follow this post
https://bbs.archlinux.org/viewtopic.php?id=150183 and made a new boot
entry "Windows 82". And I got a new error:
error: unspecified search type.
error: file '/EFI/Microsoft/Boot/bootmgfw.efi' not found
Press any key to continue...
Both your "Windows 8" and "Windows 82" entries refer to an EFI boot loader file called EFI/Microsoft/Boot/bootmgfw.efi on your EFI System Partition (ESP). This should be correct, but your Boot Info Script output doesn't show any evidence of such a file. Sometimes Boot Info Script misses such things, so you may want to check it just to be sure. Your ESP is /dev/sda1, and it looks like it's being mounted at /boot/efi by default, so check for the /boot/efi/EFI/Microsoft directory tree, and for /boot/efi/EFI/Microsoft/Boot/bootmgfw.efi in particular. If that file isn't present, then something is wrong -- perhaps you mistakenly erased the ESP when you installed Linux, thus wiping out the Windows boot loader; or perhaps the file was accidentally deleted somewhere along the way. (Note that on FAT, which the ESP uses, case is irrelevant, and in fact case varies between the filenames reported by Boot Info Script and what's recorded in your configuration files.)
You do have another boot loader file that may be a duplicate of the Windows boot loader: EFI/BOOT/bkpbootx64.efi. This filename is generally created by Ubuntu's "Boot Repair" tool, which IMHO can do as much harm as good, especially on a system that's not booting Ubuntu. If you ran this tool, though, it's conceivable that bkpbootx64.efi is a copy of the Windows boot loader, so copying it to EFI/Microsoft/Boot/bootmgfw.efi might get things working. OTOH, the Windows boot loader relies on other files to do its job, so if they're not present, copying the Windows boot loader to its original location won't be sufficient.
If you can't get things working based on the preceding suggestions, I recommend you run a Windows repair tool. These are accessible from a Windows recovery disc. Such disc images are readily available on the Internet, but I don't happen to have any links handy. Try Microsoft's own site; images obtained from random third-party sites might contain malware. Once you've done this, chances are the computer will boot directly into Windows. You'll then need to either restore GRUB as the default boot loader or install another boot loader or boot manager. You can use the Windows "bcdedit" command to do the former, as in:
bcdedit /set {bootmgr} path \EFI\arch-grub\grubx64.efi
You'll need to type this from an Administrator Command Prompt window.

Auto Restart and Error Screen In Windows 8.1

Hello
I am running Windows 8.1 64 BIT on HP EliteBook 800 G1 SFF
Processor Core I5, 4 G Ram DDR3
Whenever i install windows 8.1 i got Error Message says : There a Problem and your PC will restart.
So I went to Event Viewer and i got those messages :
Log Name:      System
Source:        Microsoft-Windows-WER-SystemErrorReporting
Date:          10/26/2014 11:37:48 AM
Event ID:      1001
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000001a (0x0000000000005003, 0xfffff58010804000, 0x000000000000a115, 0x000000007166c209). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 102614-10140-01.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-WER-SystemErrorReporting" Guid="{ABCE23E7-DE45-4366-8631-84FA6C525952}" EventSourceName="BugCheck" />
    <EventID Qualifiers="16384">1001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-26T18:37:48.000000000Z" />
    <EventRecordID>550</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>System</Channel>
    <Computer>------</Computer>
    <Security />
</System>
<EventData>
    <Data Name="param1">0x0000001a (0x0000000000005003, 0xfffff58010804000, 0x000000000000a115, 0x000000007166c209)</Data>
    <Data Name="param2">C:\Windows\MEMORY.DMP</Data>
    <Data Name="param3">102614-10140-01</Data>
</EventData>
</Event>
And the DMP File here
https://www.mediafire.com/?x6i37s2hh6zu38y
Please Advice
Mohamed Mahmoud IT Specialist

These crashes were related to memory corruption (probably caused by a driver).
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Since it is more likely to be a driver please run verifier first.
1-Driver verifier (for complete directions see our wiki here)
If verifier does not find the issue we can move on to this.
2-Memtest. (You can read more about running memtest here)
If you cannot boot after enabling verifier reboot into safe mode
In Vista & win 7 (F8)
In win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

After downloading iTunes 7.02 into Windows XP my DVD-ROM only plays CD-ROMS

piece of #@$*! Windows XP

I got the iTunes 7 to work on XP Pro 64bit. What I did was this:
1. Downloaded DriverInstaller_AMD64EM64T.exe
2. Installed it.
3. Created this file tree: C:\Windows\Sysnative\drivers (Easier terminology, I went into the Windows folder and created a folder named "sysnative", opened that folder and created another folder called "drivers".
4. Then I located the folder where I installed DriverInstaller_AMD64EM64T.exe ..
5. I took the file called GEARAspiWDM and COPIED IT. I DID NOT MOVE THIS FILE!!!
6. I pasted a COPY of this file into sysnative\drivers. The folder I just made.
7. I installed iTunes 7, not 7.6. 7.6 and this method won't solve the burning issue. That would require more programs and more patients.
Note, you will have to manipulate iTunes when you want to burn. The best way to do this, I found, was to simply make a playlist and right click the playlist on the left column and select burn to disk. It should act normally.
Message was edited by: Nexis

Windows 8.1 Easy Transport

Similar Messages

Maybe you are looking for