Windows 8.1 Enterprise Evaluation- Strange behaviour of network adapter

Hello there are discussions and questions around this community about network adapter dropping connection while system is running. But I have found unique problem with my network adapter driver.
I have tried to state my problem as clearly as possible. Please ask if any detail is required.
My network status shows no access on following occasions:
1. On alternate system wakeups.
eg:
a. System boots up
Internet accessible
no problem
b. I put system to sleep(first time) and wake it up
No access to internet !!!
When I check in network and sharing center not even adapter shows in disabled status.(See video from the link given below).
c. Without restarting system or without installing network adapter again, I put system to sleep again and wake it up (2nd time).
Internet accessible
d. I put system to sleep for (3rd time) and wakes it up.
No access to internet!!
If I put system to sleep again and wake it up definitly I get network access.
2. If I switch off the modem before windows shutdown completely or in the process of shutdown, next time when I boot system, even though the modem is switched on before booting the system, No internet access tooltip will be shown on network
sysbol.
Another strange behaviour is on no internet access status, I start installing adapter, and it loads required files and prompt me to click "next" and "click" install.
But the thing is before I go to "next" button, I will get network access as shown in this link
http://youtu.be/sPlXVEiYBeo. Ignore virtualbox adapter. Same behaviour was there when there is no vbox adapter. Same was happening in Windows 8 Pro, but not in windows 7, so that there is no H/W problem I think.
Any idea on how to fix this or any alternate solution ?

Hi,
Firstly, access your network adapter official website to get the proper driver applied to your system.
Then going to Control Panel > Device Manager, right click your adapter > Properties. Under the Power Management tab, make sure "Allow the computer to turn off this device to save power" checkbox unchecked.
If it still persists, try to disable "fast startup" as below steps:
1.In Control Panel, open the Power Options item.
2.Click the Choose what the power buttons do link.
3.Clear the Turn on fast startup (recommended) check box.
4.Click Save Settings.
Karen Hu
TechNet Community Support

Similar Messages

File procol hyperlink bug in the IE browser of Windows 8.1 Enterprise Evaluation

Hyper links with standard file protocol don't work with the IE browser of Windows 8.1 Enterprise Evaluation
The same hyperlinks work under the same Windows 8.1. Enterprise Evaluation:
1. Google Chrome
2. Opera
3. Fire fox
4. Safari
The same hyperlinks work under the Windows 7.1
Example:
<a href="file:///E://xxxxxxxx/yyyyyyyy.html" target="_blank">zzzzzzzz</a>
5. The problem arises what ever the drive i.e.
F: G: H: I: ... R: i.e. not only in I: as stated in some references

Hi，
Make sure the URLs are in correct format, just like examples listed in this link, some "bad" URLs can still work in other browsers, but not in IE.
http://blogs.msdn.com/b/ie/archive/2006/12/06/file-uris-in-windows.aspx
Or check you IE security settings, lower the security setting level in Internet Options\Security, or add the address to a trusted site, if you have turned on IE protected mode, then turn off it as a test
Add: What happens if you directly drag the file from File Explorer to the IE address bar?
Yolanda Zhu
TechNet Community Support

What is SHA1 code for Windows 8.1 Enterprise Evaluation ISO files

Since I downloaded the files from TechNet, no sha1 code information is given in my download webpage, could someone kindly provide the SHA1 code for Windows 8.1 Enterprise Evaluation ISO files named
9600.16384.WINBLUE_RTM.130821-1623_X64FRE_ENTERPRISE_EVAL_EN-US-IRM_CENA_X64FREE_EN-US_DV5.ISO
(my sha1 code is 73321fa912305e5a16096ef62380a91ee1f112da)
and
9600.16384.WINBLUE_RTM.130821-1623_X64FRE_ENTERPRISE_EVAL_ZH-CN-IRM_CENA_X64FREE_ZH-CN_DV5.ISO
(my sha1 code is 2fc5246dd9d02d185e92283324d9b81822827f19)

Hi,
This version is Windows 8.1 Enterprise Evaluation, I suggest you check sha1 in TechNet subscription download center.
Welcome to Subscriber Downloads
https://technet.microsoft.com/en-US/subscriptions/securedownloads/hh442904#searchTerm=Windows%208.1%20Enterprise&ProductFamilyId=0&Languages=en&PageSize=100&PageIndex=0&FileId=0
Regards,
Yolanda
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows 8.1 enterprise evaluation wifi card driver problem

i have hp pavilion dv5 1020el all things are ok, only wifi not working.

Alexutzhu,
According to the
Windows Compatibility Center, your Intel 4965AGN Wireless Network Adapter is compatible with Windows 8.1 so with the correct driver it should work properly.
The driver you’ll want to use can be found
here on the Intel website. Additionally, more information regarding your network adapter can be found on
this page.
Hope this helps.
Mike
Windows Outreach Team – IT Pro

IMac Running Windows 7 can't 'detect a properly installed network adapter'

I just put windows 7 on my brand new iMac 27'' i7, but to my surprise I cannot connect to a wireless network, and when I go to the trouble shooting section it says-
"Windows did not detect a properlu installed network adapter. If you have a network adapter, you will need to re-install the driver."
Help me to connect to the internet please.

Install the Apple drivers; read the guide.
You should have Lion so you would have Boot Camp 4.0
Boot Camp 4.0 Installation & Setup Guide OS X Lion
Boot Camp 4.0, OS X Lion: Frequently asked questions

Strange behaviour of polling adapter

Hi All,
I have a strange situation where the database polling is not happening.
Here is my use case
I have a polling db adapter which picks up a record from the table and invokes a procedure on the same database instance with the same connection factory configuration and then commits the data to the AQ . I am using OSB(11.1.7) to achieve this . This worked fine for a while then the issue started appearing . The poller is not being invoked suddenly and with no error log on the all of the servers. I have stopped and activated the db adapter,reset the datasources and restarted the sever but none of them were working . Strangely when i invoke the proxy service from the test console I can see the data in the queue. Assuming there is an issue with the dbadapter this shouldn't work since there is an invocation to the procedure in the same database instance using the same connection factory as that of polling . Can some one please help regarding this if you ever faced such an issue
Thanks..

Hii,
There are scenario where the OSB proxy stops polling the record. Please check the logs to try to figure the exception or you can enable tracing to get the detail.
For time being in order to start polling try to enable and disable the proxy service.
Regards,
Abdul

Error 0x80070015 on clean install of windows 8.1 enterprise

Hi, I am receiving and error 0x80070015 when trying to do a clean install of windows 8.1 enterprise evaluation on to a newly built PC. I am installing from a USB stick to a brand new SSD running in ACHI mode. Each time the installation reaches
12% on the 'getting files ready for installation' I receive this error message. The first time I tried the installation I also got an error message 0x800703ee but this has now stopped.
Please go easy on me, I'm not an IT pro, I want to check out windows 8.1 on this new build to decide if I want to go with it or stick with Windows 7 on this and my other work PC.
Any advice gratefully received.
Thanks, Simon

Hi,
Error code 0x80070015 usually means "device not ready" and is often seen when the USB drive or disc is having issues.
Please re-create a bootable USB or DVD to check the results.
Another thing is that there might be some SATA clash on your system with the new SSD connected. Please try to enter the WinRE from your USB drive and try following commands to create new partition:
1. Use Diskpart command line to show the partition on your disk:
Run CMD as Administrator, type following command line one by one:
DISKPART
List Disk
Select Disk 0
2. Delete the system partition (if there is, it can be about 100~200MB) and C partition, delete these 2:
List Partition
Select Partition 0 (I suspect that there is the system partition on this disk and it’s the partition 0)
Delete Partition
Select Partition 1 (I suspect that this is the C drive)
Delete Partition
3. Create new one.
Create Partition Primary
4. Try to restart system via installation disk and reinstall Windows 8 on it.
For detailed information about this command, you can refer to this article:
DISKPART:
http://technet.microsoft.com/en-us/library/cc770877(v=ws.10).aspx
If the issue persists, please run Check disk tool in WinRE:
CHKDSK /R /F
Any error message, please post back.
Hope these could be helpful.

2TB USB disks don't work under Windows 8.1. Enterprise Evaluation

Hi,
2TB hard disks don't get started in Windows 8.1. Enterprise Evaluation:
*** Error code 43
*** Unkown USB Device - Device Descriptor Request Failed
*** configured but not started
Hardware is OK i.e. this is Windows 8.1. Enterprise Evaluation problem:
~ the same USB hard disk worked before and after this with older Windows PCs
2TB seems to be challenge for Windows 8.1. Enterprise Evaluation:
~ it runs ok USB devices with < 2TB in the same PC and in the same port
Notes:
~ restart of Windows 8.1. Enterprise Evaluation did not help
~ Windows NTFS format is being used

try this solution
http://blogs.msdn.com/b/usbcoreblog/archive/2013/11/01/help-after-installing-windows-8-1-my-usb-drive-disappears-or-file-transfers-stop-unexpectedly-r-a-post-title.aspx
or if still not solved, I suspected this USB drive attached during Windows 8.1 installation, I suggest remove it at device manager and scan for the new device and lets see if windows can detect this HW, try also update all driver if there is any update for
this PC and update windows or update OS to pro version

Can I upgrade to windows 8.1 pro from enterprise evaluation?

I recently downloaded the enterprise evaluation, and now the trial is coming to its end. Can I upgrade using a product key, or do I need to do it via disc?

I'm sorry to say, absolutely NOT.
You must install a new OS afresh, there is NO WAY to upgrade the Enterprise Evaluation version to anything in line. The information provided where you downloaded the software says as much.
From this page:
http://technet.microsoft.com/en-us/evalcenter/hh699156.aspx :
Following the evaluation period, you will need to replace the operating system on your test computer and reinstall all your programs and data. It is not possible to upgrade the evaluation to a licensed working version of Windows 8.1 Enterprise. A clean installation
is required.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Can i upgrade to windows 8.1 enterprise from 90 day evaluation version

can i upgrade to windows 8.1 enterprise from 90 day evaluation version? as our company has volume license key for win 8.1 enterprise purchased

yes you can.
Skip Product Key Input in Windows 8.1 Setup
To achieve our objective, we need to edit the ei.cfg (edition configuration) file present inside the
/sources folder of the ISO image. All we need to do is to provide the version details inside this file so that Windows Setup is not needed to ask for a product key to install the appropriate version relevant to that product key.
If you are going to install Windows 8.1 using a USB drive, transfer the installation files to the USB and then proceed to step 2. On the other hand if you need to create a DVD, open the ISO using a utility such as MagicISO so that the structure is not affected.
Browse to the /sources folder.
Look for the ei.cfg file and open it in a text editor such as Notepad or Notepad++ (preferred). If the file doesn’t already exist, create a new text document and rename it as ei.cfg
Now amend the file depending on the version which is included in your particular copy and the version which you want to install. For Professional edition which will be the best bet for most of the users, paste the following context into the
ei.cfg file. Make sure that anything that already exists in the file should be cleared first.
[EditionID]
Professional
[Channel]
Retail
[VL]
0
Save the file and run the Windows 8.1 setup again. The setup will not ask for the Product Key anymore.
This is not a hack or anything illegal. The configuration above is supported by Windows installer and is well documented by Microsoft and can also be used on some other versions of Windows as well.

Strange behaviour in ORacle Forms Webutil 106 / Error message WUC-14 WUC-12

This is to inform you about a strange behaviour in Webutil V1.0.6
Hosting environment is Oracle Application Server 10.1.2.0.2 on Unix Solaris 10
Oracle Server 10.2.0.4.0 Enterprise Edition
Client-envionment : Windows 2000, IE 6
I created an Forms based application which reads in certain text files into the database using
Webutil. The data will get changed using the application with logic and lateron a different textfile
will be transmitted using either ftp or it may be created on the client side (again with Webutil).
This solution worked perfect for some time (a year or so) using CLIENT_TEXT_IO...
Hoewever, during the week, I recognized users coming up with the statement that the download
to the local client does not worked anymore in certain situations. The system is producing an error-msg
on the Form in the following sequence :
WUC-14 [getFromObjectCache] ...
WUC-14 [getFromObjectCache] ...
WUC-12 [FileFunctions.newLine()] ...
I traced the session and traced WebUtil, was able to reproduce the problem but could not find out the source
of it in the first place.
Hoewever, it came out, that part of the file being created on the client is a "¿" sign : hex :$BF
This was already part of the file being read in the first place, so the value is stored in the database.
There is no problem when reading a file having a content like this with CLIENT_TEXT_IO but there obviously is one
when writing it to the local client.
The file is getting processed on the client and gets closed with CLIENT_TEXT_IO.FCLOSE.
After the FCLOSE statement is getting processed, the above errors occurs, The length of the produced file is then : 0 bytes ^^
Whenever facing a problem like this check the content of the file you are trying to create.
Workaround was :
- set workingDirectory in formsweb.cfg
- using Forms based TEXT_IO rather than CLIENT_TEXT_IO to create the file on the backend side (Apps-server)
- implement WEBUTIL_FILE_TRANSFER.AS_To_Client_With_Progress to download the file to the client
In order to make it a little bit "colourful" I implemented a bean with progressbar when creating the file on the back end side
Works perfect... and looks nice :)

XeM wrote:
Hi Andreas,
install.syslib.location.client.0=webutil\syslibi found the above line over google but when i check my webutility configuration file i didn't found it there. I added this line after the line i have mentioned in previous post but this also not worked. And then i worked on changing permission over folder.
HI XeM
Your adding location is ok. But i suggest try something different. Change the above line to
/* i'm confuse with the \ or / *\
install.syslib.location.client.0=\webutil
or
install.syslib.location.client.0=/webutilAnd do the following work In the client
1. Close ALL open browsers.
2. On the client machine search all directories for webutil.*properties and delete all instances of that file.
3. Delete d2kwut60.dll, JNIsharedstubs.dll, and jacob.dll from the JRE\bin directory.
4. Clear the JRE jar cache. This can be done several ways, but using the Java Control Panel is likely the easiest and safest.
Now stop the OC4J instance and start again and try at client...
Hope this works...
If works... please post the solutions.
Hamid

APEX Listener and EPG - strange behaviour

Hi
For some years, I've used EPG for APEX but have struggled with performance particularly as I can have up to 150 student developers using at any one time.
I do a fair amount of work using ORDImage and have successfully developed APEX applications to upload image files and display full-size and thumbnail images.
After upgrading to APEX 4.1 (from 4.0), I decided to install APEX Listener standalone.
Before I did so I checked that my applications still worked in 4.1 and they did.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.
Configuring APEX Listener and running the same application through that DOES display the images.
So this part of the application works under APEX Listener but not under EPG.
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank page with a wwv_flow.accept URL although the image does indeed upload. Under EPG it works as expected and I get a success confirmation.
So this part of the application works under EPG but not under APEX Listener.
Has anyone else come across different behaviour depending on the mode of connection?
Thanks
Brian
[Oracle EE 11gR2, Windows Server 2008R2, APEX 4.1, APEX Listener 1.1.3]

Hi Brian,
it sounds like you have both EPG and APEX Listener running on the same machine, so your problem might result from a port conflict. Note that both services use TCP port 8080 as default.
At least a port conflict would explain the strange behaviour in your case, some things working on one web server and some on the other.
Some parts of your initial post hint to that direction, e.g.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on >wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.... because the APEX Listener only interfere with the EPG if it is at least running on the same machine as your database and furthermore, if it is unconfigured in terms of ist database connection, a port conflict might be the only way it could cause anything like that.
However, if you are sure that's not the issue, please check if you see any error in the APEX Listener's log for the following action you performed:
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank >page with a wwv_flow.accept URL although the image does indeed uploadIf you actually see just a blank screen, something very bad must have happened and you should see some kind of stack trace there.
For further investigations, if necessary, it would be helpful to know how you deployed or started your APEX Listener and which JDK version you use.
For the moment, I still think the port conflict is my best guess.
You could avoid it by either changing the port for EPG (I'd not recommend that if you have other users still using it) or by changing the port for your APEX Listener.
-Udo

Upgrade 8.1 Enterprise Evaluation to 'Update 1' released today?

I've recently installed 8.1 enterprise evaluation (90-day) in anticipation of summer upgrades for our school. I know we're supposed to be able to apply enterprise updates via the VLSC, but I'm wondering how to make those available before we've actually
purchased the licenses (OVS-ES licensing platform will go in effect this June for our school).
Does anyone know how/where to download the '8.1 Update' (awareness of desktop pc's, default to desktop on boot, desktop applications for pics, etc...) if you are running the 8.1 Enterprise Evaluation?
Thanks in advance.

At this time, the forthcoming Update to Windows 8.1 is only available from the Windows Update website. (There is a standalone version available for MSDN Subscribers, but it is not as easy to install as the file from Windows Update).
Update:
Windows 8.1 Update (KB2919355)
Carey Frisch

Strange behaviour from new 2012R2 in old domain

Hi all,
At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
DC-DOMAIN-1:
Windows Server 2008R2
Shares NETLOGON and SYSVOL
DC-DOMAIN-2:
Windows Server 2003 R2 x64
Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
So, with this setup, I've noticed these strange behaviours, hope list isn't too big (guess there will be more behaviours but these seemed too odd):
1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
Object:CN=<an user name>, CN=Users, DC=DOMAIN
Usually followed by an information event (eventid 1955) which says:
ctive Directory encountered a write conflict when applying replicated changes to the following object.
Object:
<SAME USER OBJECT THAN PREVIOUS EVENT ID>
Time in seconds:
0
Event log entries preceding this entry will indicate whether or not the update was accepted.
A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
User Action
Use smaller groups for this operation or raise the functional level to Windows Server 2003.
And having as result that user being blocked in domain.
2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
At System log:
Error Event ID 5783, Source NETLOGON:
The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
I've seen Event ID 5783 with DC-DOMAIN-1 too....
Error Event ID 5719, Source NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
The remote procedure call failed and did not execute.
This may lead to authentication problems. Make sure that
this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO:
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying:
'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
No infrastructure Status information exists for this domain.
Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
on what to check, what to change, what to fix, would be highly appreciated.
Thanks in advance.

Hi Paul,
Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
I'll try to summarize list of things I believe are wrong:
running
DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log for every DC, shows different errors. They show things such as:
another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>:
Latency information for 35 entries in the vector were ignored.
35 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC)
On Services test, I see an
Invalid service type: RpcSs on DC-DOMAIN-3, current value
WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
On SystemLog, I see LOTS of warnings/errors such as:
A warning event occurred. EventID: 0x80000002
Time Generated: 07/28/2014 08:21:54
(Event String (event log = System) could not be retrieved, error
0x503)
An error event occurred. EventID: 0xC0000003
Time Generated: 07/28/2014 08:22:18
(Event String (event log = System) could not be retrieved, error
0x3afc)
Missing entries on DNS (we've a static DNS)
netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
DNS pointing just to DC with FSMO roles,...
repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt Gave no errors, now I must check in detail
if every replica is correct
And finally,
dnslint /ad /s "ip address of your dc" gave more DNS problems:
One or more DNS servers may not be authoritative for the domain
One or more DNS servers did not respond to UDP queries
One or more zone files may have expired
SOA record data was unavailable and/or missing on one or more DNS servers
Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed
EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb)....

Strange behaviour in Mail

I have ongoing strange behaviour with Mail in Mountain Lion on a MacBook Pro.
As well as randomly and intermitttently dropping connections to my various mail servers, I also, randomly and intermittently, fail to get to Print, or to create a new Mailbox, or to Quit. I just get a beep.
Have to quit Mail - sometimes forcibly, and restart it.
Mail will not automatically reconnect to servers after a Sleep , or moving to a differnt location.
None of this was happenning on an older MacBook, but I was running 10.7 on that machine.
Had to upgrade machine to allow upgrade to Mountain Lion. Not sure which is responsible - new MB PRo , or 10.8?!
Do I really have to re-install OSX just to reinstall Mail?
Any other pointers/hints very welcome.
Thanks

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Triple-click the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

Windows 8.1 Enterprise Evaluation- Strange behaviour of network adapter

Similar Messages

Maybe you are looking for