Windows 8.1 Enterprise - Hyper-v, Legacy Network Adapter works, but the Network Adapter does not

Folks,
I currently have 2 Virtual Switches: one I set up for WIFI, and the other I set up for
LAN.
Both switches are set up as:
- EXTERNAL
- Allow management operating system to share this network adapter
Both switches I can use with my Legacy Network Adapter.
But the Network Adapter doesn't doesn't work for either.
It did however work at one time, but I think a Windows Update killed it.
Thoughts?  Suggestions?
And as always, thank you for reading :)

And here's my HYPER-V log, Running Windows 7 Pro:
(I've applied an 'xxx' info related to my company.)
Windows IP Configuration
   Host Name . . . . . . . . . . . . : broberts-e6420
   Primary Dns Suffix . . . . . . . : xxx.com
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : xxx.com
                                       attlocal.net
Ethernet adapter Local Area Connection 2:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : attlocal.net
   Description . . . . . . . . . . . : Intel 21140-Based PCI Fast Ethernet Adapter (Emulated)
   Physical Address. . . . . . . . . : 00-15-5D-01-4C-08
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection 1:
   Connection-specific DNS Suffix . : attlocal.net
   Description . . . . . . . . . . . : Microsoft Hyper-V Network Adapter
   Physical Address. . . . . . . . . : 00-15-5D-01-4C-06
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2602:306:3a5e:7050:7426:4a85:cde9:3454(Preferred)
   Temporary IPv6 Address. . . . . . : 2602:306:3a5e:7050:2d15:806e:7f3b:ca31(Preferred)
   Link-local IPv6 Address . . . . . : fe80::7426:4a85:cde9:3454%20(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.65(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Monday, July 28, 2014 10:18:19 PM
   Lease Expires . . . . . . . . . . : Tuesday, July 29, 2014 10:18:20 PM
   Default Gateway . . . . . . . . . : fe80::769d:dcff:fe77:2379%20
                                       192.168.1.254
   DHCP Server . . . . . . . . . . . : 192.168.1.254
   DNS Servers . . . . . . . . . . . : 192.168.1.254
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.attlocal.net:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : attlocal.net
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft 6to4 Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Similar Messages

  • I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this.  Can anyone help?

    I was told I need to remove the enterprise server account I have and need to add a new one for work but the IT person did not tell me how to do this.  Can anyone help?

        Jennymbell, never fear help is here!
    Have you tried contacting your IT department for assistance? You can visit http://bit.ly/QECbGh for steps on how to enterprise activation.
    Keep me posted if you need further assistance.
    John B
    Follow us on Twitter @VZWSupport

  • HT3867 I am connected to the hotel wifi network, but the login screen does not appear.

    Hi,
    I am connected to my hotel wifi network, but the login screen does not appear. I am able to access the login page on my PC, but on the iPhone it does not appear and just tries to connect to the webpage (e.g. google.co.uk), and eventually gives up. I've tried opening pages in Safari and Chrome, but none cause the login screen to appear. I have also tried trying to log into the login page that the PC opens when connected to the wifi, but the same thing happens. I am using a iPhone 3G with the latest iOS version 6.0.1.
    Is there a way to make the iPhone try to open the login page?
    Ben.

    I have the exact same problem as the original poster and I tried many times already the solution proposed by trstark66 and it's still not working. It's not working for both my iPad and iPhone 5. I'm using the latest iOS version available all the time. I have my iPad since 3 years and my iPhone since 1 years and I always had that problem. I'm an airline pilot so I'm always in hotels. I asked my colleagues who also have iPhones and iPads and they all have the same problems from time to time. And when I go in an apple store they all say that it's the first time they hear about that problem. I never have that problem with my PCs, my previous phone and my BB playbook. Only with my iPhone and iPad....since now 3 years...Always the same problem. I'm connected to the Hotel Network, I have an IP address but nothing popup to register with a user name, password or just to access the "I have read and accept the condition.../connect". And when I go in Safari or other Browsers, I am not redirected to a login page. All I have is a message saying cannot access the webpage because I'm not connected to Internet. I tried already hard resets, on/off Wi-Fi, automatic connexion off, forget this network, reset network setting...
    My solution for now is to use my Boingo account. I connect to the hotel Network and then I use the Boingo app to connect to Internet.
    But, sometimes it works the first time or suddenly for no reason.
    Very funny, I was using Boingo on my ipad to write this message in my Hotel room because I was unable to use my free connection as usual. When I tried to press "Add Reply" it failed and I had the message "An error occured while trying to submit your post, please try again". The reason was that boingo was disconnected since I was taking too long to write this message. So I wasn't connected to Internet anymore. I opened a second tab in Safari and what did I see!... the login page to access the free connection from the hotel. This is crazy. Apple, you really suck with hotel/coffee hotspots... I tried for hours and nothing, now hours later I just open a new tab and it works. But tomorrow I know I will try the same and it will not work again. It shouldn't be that complicated.

  • I purchased design premium 4.0 German Windows  from my friend and wanted to installation it. However, the key code does not work.

    I purchased design premium 4.0 German Windows  from my friend and wanted to installation it. However, the key code does not work. He has the PC is no longer, so he can not  disable the product key. He loaded it, but only in Englisch (trial version?) Please help me for the next step. I have the license agreement in my hand.

    Nobody here can help you with this. You'll need to contact Adobe directly.
    Did your friend fill out and send in the license transfer form?
    Transfer an Adobe product license

  • I am trying to transfer an old profile into Windows 7, but the AppData folder does not show up under my name folder in USERS. How can I find it?

    When I go to Help & Troubleshooting & click Open Containing Folder I get a Windows Explorer window that shows the file path including Used-Edward-AppData, etc. But when I click on the little triangle to the right of Edward the drop down menu does not include AppData and if I just go into Windows Explorer and Users-Edward, there is no AppData folder. So I cannot overwrite the profile file with the saved profile info from my earlier laptop. The folder symbol next to Edward has a lock on it but I don't know what that means or how to unlock it.

    %AppData% is the name of an environment variable.
    On XP that variable points to C:\Documents and Settings\<user>\Application Data\
    "Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders, use %APPDATA% in the File name field
    See http://kb.mozillazine.org/Show_hidden_files_and_folders
    You can use Help > Troubleshooting Information > Profile Directory > Open Containing folder
    See also [[Using the Troubleshooting Information page]]

  • Purchased a new iPAD and wifi network name detected ,but the Next button is not enabled. Please help me

    HI
    Purchased a new ipad
    I am currently stuck with the installation of iPAD  and stays at Wifi Network and not able to highlight NEXT
    Please advice
    Regards
    YSivakumar

    Usually it's because you are not making internet connection via wifi.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Guest network is working but normal network isn't

    LAN works but normal Wireless doesn't work, if I connect to my guest Wireless it does work. I have a 50 address DHCP range and 8.8.8.8 as my DNS server. Time Capsule 4th GEN.

    Why have you reduced the standard range? And why use 8.8.8.8 as dns server (I presume in the TC itself??)
    Reset the TC to factory and start again.. set no guest wireless. Leave everything on default settings as far as possible.
    Use short names, no spaces and pure alphanumeric. eg TCgen4 base station name. TCwifi as wireless name.
    Keep passwords short, no spaces pure alphanumeric mix of case and numbers.. aprox 8-20 characters is plenty.

  • In the networking window the Computer item does not appear

    I have network sharing turned on but the Computer category does not appear in the networking window.  Any ideas how to add this category to the network window in windows 8.1?????

    Mfrakes,
    It’s possible that you’re not seeing the computer category simply because there aren’t any computers to list. 
    Make sure that the computers you’re expecting to see are powered on and connected to your network. 
    Another thing to ensure is that network discovery is enabled.
    In order to enable network discovery in Windows 8.1, start by right-clicking on the Network system icon in the taskbar notification area, then click on Open Network and Sharing Center. 
    Next, in the left pane of the Network and Sharing Center window, click on the Change advanced sharing settings link. 
    The next window that comes up will give you the option of turning network discovery on.
    I hope this helps!
    Mike
    Windows Outreach Team – IT Pro

  • Hyper-V encountered an error while Configuring the network on Vmachine

    Hi all,
    i am novice in window server 201, I learning from a ebook.While i doing the step of creating virtual machine , i got this error
    Hyper-V encountered an error while configuring the network on Vmachine 
    Hyper-V encountered an error trying to access an object on computer 'localhost' because the object was not found. The object might have been deleted, or you might not have permission to perform the task. Verify that the virtual Machine Management service
    on the computer is running. If the service is running,try to perform the task again by using Run as Administrator

    Windows Server 201? Are you sure?
       What sort of machine are you trying to install and run Hyper-V on? What OS is it running?
    Bill

  • I am trying to set up Sharing amongst several computers on my home network.  I have followed all the setup instructions but after completion Sharing does not appear in my iTunes window (on any of the computers I've set up).  There is no explanation why.

    I have been trying to set up Sharing between two computers on my network. I did this once and it worked.  However, when I try to set this up now the Sharing feature does not appear on the left side of the iTunes window (on either computer).  There is no explanation as to why not.  Is this a configuration problem, a network problem or what?   Can it be fixed?  I have tried turning sharing off and back on on both computers but to no avail.  What am I missing?  Thanks for any help you can provide.

    Hey innerev2003,
    Thanks for the question, and welcome to Apple Support Communities.
    If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
    If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
    iTunes 11 for Windows: Manage your iTunes Store account
    http://support.apple.com/kb/PH12507
    Thanks,
    Matt M.

  • I need help moving my Photoshop 7 from my old laptop to my new laptop which is running Windows 7 Enterprise.  I've tried two routes unsuccessfully.  I install the CD, it does not autoplay.  I execute Autoplay.exe at the root directory, I am welcomed, I ch

    I need help moving my Photoshop 7 from my old laptop to my new laptop which is running Windows 7 Enterprise. I’ve tried two routes unsuccessfully. I install the CD, it does not autoplay. I execute Autoplay.exe at the root directory, I am welcomed, I choose English, I accept the EULA, I get the Install/Explore choices window, with the Install button already selected, I click the Photoshop button, the CD spins, and nothing happens.  In the 2nd attempt I execute Setup.exe in the Photoshop directory, and nothing happens at all.  I’m never even offered the opportunity to enter my product code. What should I do?

    There could is likely a compatibility problem between the old software and the newer operating system.

  • After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

    After I've upgraded my iPhone iOS to 5.0.1, I got problems with connectivity. If my iPhone lose network, then it gets frozzen and I cannot make calls. After restart the telephone still does not work.

    1. Download the iOS 5.0.1: http://www.tobias-hartmann.net/2011/11/download-ios-5-0-1-veroffentlicht-direkte -downloadlinks/
    2. open itunes,Click in iTunes while holding down the Shift key (on Windows) or Alt key (Mac) to restore and firmware

  • Pinging a printer to see if it works over the network

    I've been printing from a Windows 7 computer to a PSC C6180 over a wireless network.  All of a sudden it stopped printing.  I don't if a power surge or something blew some stuff out (the fax part is already gone) or if it is something else. 
    I removed the printer and removed the installed software in order to put it back in its "initial state." 
    Before I removed the software, I tried to add a network printer to see if that would do it.   At the point in the process where it looks for printers, it didn't find it.  It makes me wonder if it will work over the network at all, but I do note the blue 802.11g LED is lit.
    Before I reinstall the software (AIO_CDA_FSW_Full_Win_WW.130_140.exe is what I have) I want to ping the printer and see if the computer can see it.  What's the ping address?

    Hello ErnieLane,
    Please follow steps 1-4 described in Access the Embedded Web Server to print a configuration page, it will contain the current IP address (if any).
    Hope this will help.
    Regards,
    AndOne
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Can i create networks by pasting in the network overview?

    hi..
    i sometimes create multiple activites and material components easily by pasting values in the activity overview and material component overview. however, when click on the network overview in a WBS element, i can only view the networks but it is not editable..
    is there a way/setting that i have to adjust so that i can create multiple networks by pasting in the network overview instead of just creating networks one by one..?
    thanks in advance

    Hi
    Sorry for digging out this quite old thread. But I have found some more Information about this behavior. The UR2 alone does not resolve the error. You have to create also a (undocumented) registry key. After that you can open ports above 49151 for NAT.
    Have a look at my blog:
    http://www.jofe.ch/open-high-ports-over-49151-on-a-windows-server-gateway/
    Does anyone know more about this registry key?
    Thx
    J0F3

  • My iPad suddenly stopped connecting to my home network. It shows the network to. Choose from but there is no IP address or other information on the network page. It is set on DHCP and proxy is set at auto. Do I have another setting wrong?

    My iPad suddenly stopped working with my home network.  It shows the network to choose from but will not connect. When I look at details in that network it does not show IP address or any other info for the network.  Setting is on DHCP and http proxy is set on auto. Network is active and can connect on wife's iPad and other home computers.  Do I have another setting wrong?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

Maybe you are looking for