Windows 8.1 Error 2 need help.
Hello I finally got an iPhone 5s, and I need to download iTunes so I can update my IOS 7.x to 8.1.2. After I downloaded ITunes I get an error 2 "apple application was not found. Apple Application support is required to run Itunes. Please uninstall Itunes, Then install Itunes again. I had an older version of itunes an it worked perfectly well before. I had my computer wiped clean and deleted everything. I tried reinstalling a few times, deleted every file including quick time and installing it again. Restartng my computer etc. I trie d to repairing itunes using the setup but it says i am missing iTunes64.msi and i can't find another source since it is missing.
[img]http://puu.sh/ezw0F/c5ecbc6576.png[/img]
[img]http://puu.sh/ezwgf/5569358769.png[/img]
I also try doing another method extracting the itunes setup using rarlab but can't seem to extract it to a folder to instal the standalone AAS installation.itunes error 2
It would just make another Itune64Setup. I need help please
Itunes 12.01
Windows 8.1
Update:
I have downloaded QuickTime and I got a new error.
I can't start ITunes because MediaAccessibilty.dll is missing
An error 7 that iTunes is incorrectly installed
and I still have the same error trying to repair.
Similar Messages
-
Windows - No Disk Error - Please help!
Windows - No Disk Error - Please help!
Hi,
I have the following set up:
* Lenovo T-61p
* Windows XP Pro, SP 3
* HP Photosmart 8250 printer (with nothing plugged into the various card readers, and USB slot in the printer)
I am getting the following error:
Windows - No Disk
Exception Processing Message 0xc0000013 Parameters 0x75CE023C
0x84C40C84 0x75CE023C
I have done a lof experimenting and thru process of elimination, and believe I have determined that this only happens when the HP Photosmart 8250 printer is plugged in to the USB slot of the computer.
I can stop it from happening by safely removing hardware, and removing the drive that the 8250 creates on your computer when you plug it in. In my case, this is drive E. I'm guessing if there was something in the the various card readers, and USB slot in the printer, that's what those would be, but I don't those use those functions of the printer.
I understand there is more at work than simply the printer, because I did not used to get this error, so some software changed as well, that is scanning all ports, and finding a drive that has no disk, and producing the error.
A simple google search finds a lot people all over the world having this problem, and are solving it in different ways, because the suspected source is different: Norton, HP, etc.
I have tried everything I have read, and the only thing that works was my own idea, of manually safely removing the drive the printer creates each time I plug in the printer.
Anyone every any better, more permanent solutions? Or know what the real root of the problem is? What is scanning all the drives and being showing an error message because it found an empty drive?
Thanks and Happy Holidays/New Year!I've been getting the same error on my 4G nano for the past week. I've had my nano for about a month and the first few weeks were fine. Tried it on 2 different computers (Vista and XP) and same problem. Tried it on a 3rd (XP) and it started ok. Problem started coming back after a day.
I was able to find a quick fix though. I noticed that sometimes the message says something like "iexplore.exe... no disk..." even if I don't even use IE. What I do is end iexplore.exe on task manager before running iTunes and syncing my nano. I don't get the error whenever I do this, but one drawback is that the contents of my nano suddenly pops up in a window - even when disk use is not enabled.
I've reset/restored my nano dozens and dozens of times to make sure it's clean. Leads me to believe it's a driver issue. Either that or I have a friggin malware problem I can't seem to find.
I'll be posting updates every now and then. I'm no expert so I'm hoping an Apple expert also steps in to give some input. -
5, it says, "There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor." I have Windows XP and I need help.
After reading all these posts, one by one did not resolve my problem until I got the very end. Regardless of what step would resolve your problem, these are the steps I would recomment to everyone for a what seems to be a safe and fool-proof upgrade to iTunes 10.5.
1. Stand alone upgrade to the latest Quicktime version
2. Go to control panel and "change" then select repair to the following applications in the order specified by the post on Oct 27. (Notice I skipped Quicktime because it had been upgrade manually,and Bonjour did not have a "repair" option)
iTunes; Apple Software Update: Mobile Device Support; Apple Applications Support
Some of these applications may not appear if they do not apply to your configuration (no iPhone, or no iPad, or other apple devices).
Once all updated, I did not need to restart nor launch any applications, I simply went straight into the 10.5 upgrade, and where it normally got stuck, this time the installation continued for a while longer until it completed successfully.
Great work everyone who contributed! Thank you very much! -
Acrobat Error - need help! - Acrobat 9 Pro
When I try to open an acrobat files my it trys to Open EVERY acrobat file on my computer and does so until I get the following message
"There was an error opening this document. The maximum number of files are already open. No other files can be opened or printed until some are closed"
Then I have to force quit.
This just started happending a few months ago
I am on a Mac OSX
I need help! Any suggestions?
DebbieI have a 10.5.8
I am not that technical so not sure what you mean about applejack etc.
Thanks for helping!
Debbie
Date: Sat, 10 Apr 2010 13:03:28 -0600
From: [email protected]
To: [email protected]
Subject: Acrobat Error - need help! - Acrobat 9 Pro
What version of OS X? Some people have luck by clearing their caches. This can be done with Applejack in 10.5. Onyx will work in SL.
> -
LR 4 only prints a blank page on Epson 2880. Print preview panes remain blank. Window 7 OS. Need help desperately!
Bob
Thank you for your kind consideration of my problem. Up until the software started to print blank pages the preview pane always showed the selected print within the selected layout. Something has changed. Lightroom will print to the JPEG file but only a blank page on the Epson 2880. I've been in contact with Epson support and an IT tech and they tell me the problem is with Lightroom. I'm at my wits end and thinking of upgrading but the glitch may carry over. Uninstalling and reinstalling and deleting the preferences file did nothing to rectify the situation.
Thanks again!
David -
General exception error need help!
Experts,
i am facing this problem. i connect to the net by proxy (through office Lan). none of the java applets work for me. Need help
Java Plug-in 1.5.0_08
Using JRE version 1.5.0_08 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\mkrishna
network: Loading user-defined proxy configuration ...
network: Done.
network: Loading direct proxy configuration ...
network: Done.
network: Proxy Configuration: No proxy
basic: Cache is enabled
basic: Location: C:\Documents and Settings\mkrishna\Application Data\Sun\Java\Deployment\cache\javapi\v1.0
basic: Maximum size: unlimited
basic: Compression level: 1
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
basic: Registered modality listener
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@872380, refcount=1
basic: Registered modality listener
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@872380, refcount=2
basic: Registered modality listener
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@872380, refcount=3
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@15212bc
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@97a560
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@1ea5671
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
basic: httpCompression = true
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/liste.jar with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/ZoneFavoris.class with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/ZoneFavoris.class with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/Outline.class with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/ZoneFavoris/class.class with proxy=DIRECT
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/ZoneFavoris/class.class with proxy=DIRECT
load: class ZoneFavoris.class not found.
java.lang.ClassNotFoundException: ZoneFavoris.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
basic: Exception: java.lang.ClassNotFoundException: ZoneFavoris.class
java.lang.ClassNotFoundException: ZoneFavoris.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
basic: Modality pushed
basic: Modality pushed
basic: Modality pushed
basic: Modality popped
basic: Modality popped
basic: Modality popped
basic: Modality pushed
basic: Modality pushed
basic: Modality pushed
basic: Modality popped
basic: Modality popped
basic: Modality popped
network: Connecting http://150.101.78.39/dsmapp/catalog/classes/Outline/class.class with proxy=DIRECT
load: class ZoneFavoris.class not found.
java.lang.ClassNotFoundException: ZoneFavoris.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
basic: Exception: java.lang.ClassNotFoundException: ZoneFavoris.class
java.lang.ClassNotFoundException: ZoneFavoris.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
basic: Modality pushed
basic: Modality pushed
basic: Modality pushed
basic: Modality popped
basic: Modality popped
basic: Modality popped
load: class Outline.class not found.
java.lang.ClassNotFoundException: Outline.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
basic: Exception: java.lang.ClassNotFoundException: Outline.class
java.lang.ClassNotFoundException: Outline.class
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
... 10 more
basic: Modality pushed
basic: Modality pushed
basic: Modality pushed
basic: Modality popped
basic: Modality popped
basic: Modality poppedHi
I think you need to configure proxy for the JRE
If you are using windows Go to control panel , you will find an icon called java plugin. if you have installed multiple JRE you will find multiple icons . Select the one which is configured to browser.
You will find a proxies tab in that window , add the proxy details there
Hope this helps you
Vijay -
Need help!
Why my java program work well under C:\, but can't under D:\Java today? It worked well even yesterday. I had tried the "Hello World", it can not work under D:\Java either.
when I enter the "java d:\java\Hello" order(after javac of cause), those displays are here:
Exception in thread "main" java.lang.NoClassDefFoundError: d:\java\Hello
Caused by: java.lang.ClassNotFoundException:d:\java\Hello
at java.net.URLClassLoader$1.run<URLClassLoader.java:200>
at java.security.AccessController.doPrivileged<Native Method>
at java.net.URLClassLoader.findClass<URLClassLoader.java:188>
at java.lang.ClassLoader.loadClass<ClassLoader.java:306>
at sun.misc.Launcher$AppClassLoader.loadClass<Launcher.java:276>
at java.lang.ClassLoader.loadClass<ClassLoader.java:251>
at java.lang.ClassLoader.loadClassInternal<ClassLoader.java:319>
The Hello.java has no problem,and it worked well even yesterday!
I just don't know what had happened.
Someone who can help me please reply or email at [email protected]
Thank you!The simple "Hello World" can work under Editplus, but can't under DOS.
The error appears as the same. I don't know what I should do, could you tell me please?
Thank you!First test whether environment variables had been set properlyor not
To test :-
1) Open cmd
2) type java
3) If it runs that means you have set it properly
Then go to your program directory i.e d:\java\
and type
javac Hello.java //to compile it and then
java Hello //To run it -
Windows Setup Error, Need Help
so i just tried to install what i think was XP home edition on my MacBook. I picked the partitioned boot camp disk to install it to, and all went well until the setup was complete. After setup was finished copying files, my computer rebooted and came to a black screen that read something like "press any key to boot from disk. . . . ." then it displayed a message something like "disk error, press any key to restart." so i pressed a number of keys but nothing happened. i couldn't eject the disk or get anything to happen so i had to do a cold shut down. I rebooted and when it came to the black screen again i pressed a key before the error popped up and it took my directly back to the windows setup.
so basically im stuck going through the setup. although now i cant get past the part that asks you which disk to copy windows to, because its already been setup on the boot camp disk. i cant eject the windows CD or figure out how to get back to the mac OS.
Im pretty bad at computers so any help would be great, its either this or i take it to an apple store. Does anyone know what might be causing this problem?
Thanks.Two things you might try. After turning the power off, hold down the switch below the scroll pad when you reboot. This should eject the install disk. Alternatively, when you start to do a cold boot after powering down, hold down the option key. You should eventually see icons for the possible operating systems. With the arrow keys move the cursor to the MacOS operating system, and then hit the return key. This should boot you in Leopard.
-
Daily BSOD windows 7 64 bit NEED HELP!!
I keep getting this error daily but can't seem to find a solution to it
Please Help!!!
Problem signature:
Problem Event Name:
BlueScreen
OS Version:
6.1.7601.2.1.0.256.1
Locale ID:
1033
Additional information about the problem:
BCCode:
a
BCP1:
FFFFF80010B9CA22
BCP2:
000000000000000D
BCP3:
0000000000000001
BCP4:
FFFFF80002CB85A5
OS Version:
6_1_7601
Service Pack:
1_0
Product:
256_1Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, you will need to allow the system to crash once again to generate a crash dump.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama -
Trying to fix an error - need help
Hello everyone
I'm having a problem while I try to activate the app
when I try a error shows me on the screen saying "The applecation was unable to start correctly (0xc0150004). Click OK to close the application"
The download was fine and succesful.
can you please help me fix this error?
thank you.The system requirements for AE CC 2014 specifically state that it needs Service Pack 1 if it is to run on Windows 7.
You will need to get that sorted out before you will be able to run After Effects. Looks like something is wrong with your Windows OS. -
I have a Windows ME program. Need help please
I am trying to install the cd software and computer is giving me an error on the download. SP4 2000 or XP needed. Is this true? Do I need to change my system in order to use an Ipod?
You can't use iTunes or the iPod Updater utility unless you upgrade your operating system.
There are some third-party alternatives to iTunes, such as XPlay2, which supposedly runs on Windows ME.
Using this software isn't supported by Apple, or these forums. It would be a use at your own risk type of thing.
Upgrading your operating system will offer the best solution to your problem.
If you choose not to, then you are forced to use alternative software which may degrade your user experience with the iPod. You wouldn't have access to the iTunes Music Store to purchase music or videos without using iTunes. -
Urgent! - unexpected error -- need help!!
Hi, all. I'm a photographer on a tight deadline and need to upload pictures to my lab. The program uses java and it's been working fine for months since I first started using it. Now, all of the sudden, when I try to upload pictures online to my lab and java tries to run, I get knocked off of my online connection. Java just won't connect me any longer. I get error messages on my desktop and I pasted it below. Can anyone give any advice? I so badly need to be able to get my orders uploaded to my lab!! Thank you in advance. Here's the error message:
An unexpected error has been detected by Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0bd09bc7, pid=2308, tid=2832
# Java VM: Java HotSpot(TM) Client VM (1.6.0_01-b06 mixed mode, sharing)
# Problematic frame:
# C 0x0bd09bc7
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
--------------- T H R E A D ---------------
Current thread (0x09735000): JavaThread "AWT-Windows" daemon [_thread_in_native, id=2832]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000010
Registers:
EAX=0x00000010, EBX=0x00000000, ECX=0x00000000, EDX=0x0000000c
ESP=0x0a23f668, EBP=0x0a23f670, ESI=0x0a23f6d4, EDI=0x0a23f684
EIP=0x0bd09bc7, EFLAGS=0x00010202
Top of Stack: (sp=0x0a23f668)
0x0a23f668: 0a23f6d4 00000000 0a23f6c0 0bd6d5bf
0x0a23f678: 00030356 00000000 00000102 0a23f6d4
0x0a23f688: 0a23f880 00000000 00000000 00000000
0x0a23f698: 0000000c 0bcf6840 00000001 2110fb50
0x0a23f6a8: 0a23f684 0a23f28c 0a23f788 0bd5caf0
0x0a23f6b8: 0c77b1a8 ffffffff 0a23f704 68057223
0x0a23f6c8: 00030356 00000000 00000102 0a23f76c
0x0a23f6d8: 680571c0 2b294bc0 074e01a5 0a23f854
Instructions: (pc=0x0bd09bc7)
0x0bd09bb7: c0 96 0c 0b c0 58 74 08 8b 00 03 05 cc c0 96 0c
0x0bd09bc7: 8b 00 0b c0 75 05 e8 7e 6b fe ff 89 45 fc 8b 75I was also facing this problem for the last 2 days. Today i removed all the version of JRE installed on my system from Control Panel & installed Java Platfor, Standard Edition 6 Version 1.6.0. Now my applications are working perfectly.
thanks
Sooraj -
User Error Needs Help Correcting - Repeatable Tag on Custom Section Attribute
OK, I have v.6111. Today I am manually putting the supplier_eq_create tag on all the the existing attributes in our custom sections so suppliers can add them when we send eQs. Unfortuately, I accidently clicked on the Repeatable tag instead of Supplier_EQ_Create in a couple of instances in our Export/Staging Environment. When I try to remove the Repeatable tag, I get the error that says " row's Repeatable status cannot be altered after the row has been activated" ... we have not actually used the repeatable functionality of the tag. I need to know how I can remove this tag from active attributes due to human error before I import to PROD. Can the forum help me?
Best, BeckieHi Beckie,
As long as you are sure that no-one has consume this you can remove this tag with a database script.
As with every script make sure that you backup your data.
With the following script you can find the rows that contain repeatable tag for a particular section template
select rowTemplate.* from eaSectionDynamicTagJoins rowTTagjoin
inner join commonEARowTemplate rowTemplate on rowTemplate.pkid = rowTTagjoin.fkEAS
inner join commonLookups tag on tag.pkid = rowTTagjoin.fkTag
inner join commonEASectionTemplate sectionTemplate on sectionTemplate.pkid = rowTemplate.fkSectionTemplate
where tag.Name = 'Repeatable' and langID = 0 and Category = 'EASRowDynamicTag'
and sectionTemplate.id = '<custom section id>';
Tags are linked to custom section row templates using eaSectionDynamicTagJoins table.
You can remove the tag from a specific row using the following script
delete from eaSectionDynamicTagJoins
where fkEAS = '<pkid of the row>';
Hope this helps. Let me know if you have any questions,
Dmitriy -
[PartyName1 [6672]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Transaction (Process ID 1414) was deadlocked on lock resources with another process and has been chosen as the
deadlock victim. Rerun the transaction.".you need to provide Details about your package like what is source/destination.. any SQL query/where is the exact deadlock point.
Please check the following links which may help you.
http://blogs.technet.com/b/fort_sql/archive/2011/12/12/get-rid-of-deadlocks.aspx
http://msdn.microsoft.com/en-us/library/ms191242.aspx
Let us TRY this |
My Blog :: http://quest4gen.blogspot.com/ -
"An error occurred during the installation of assembly" major error, need help.
I'm trying to update itunes because my it doesnt recognise my ipod touch 4 on my laptop. I have tried on another computer and it recognises it so I know it's not the ipod. However, I keep getting messages like these which impede the installation process.
Now ever since I have tried to complete the update I cannot open Itunes at all and I get this message.
Please help because this is extremely stressful as every time I follow a prompt to fix this error it just keeps getting worse and worse.
I am using Windows 7 64xOk so I managed to get itunes to open again. All I had to do to solve the second issue was to close the update process.
I then went into itunes and tried to download again via the prompts which results in this...
Of course, I have done this. The first message was the result of trying to install this way.
I'm scared to uninstall the itunes I have as I am afraid that it wont let me reinstall because of these issues. -
IPod 60 Photo - Windows XP - iTunes ****! Need Help!
I use a compaq presario 3017cl and every time i connect my ipod the updater says that it needs to be restored. Sick up having to restore and udate 16gigs of music just to add one song.
On my third iPod Photo 60gig, have logged countless hours with tech support trying to find a solution but still no answer. I've tried every suggestion, every board, every tech bulletin, just about everything anyone can think of. Please help i'm in iPod ****.
I've read somewhere on this board that some people been having problems with SiS USB chipsets. Has this been verified can you please comment if you have had the same problem.
Can anyone help, does anyone have any ideas?
compaq pressario 3000 Windows XPThanks!
I have already tried. And in a last ditch effort out of utter fustration, and to eliminate all possible software conflicts, i finally decided to reformat my harddrive. I currently have ONLY windows xp sp2 with all posible updates installed and as far as software the ONLY thing installed is itunes and ipod updater. It's as clean as it can be......
Thanks again any other ideas???? Help????
Maybe you are looking for
-
PROBLEM USING WINDOW STORE IN WINDOW 8.1
HI Sir when i open window store and install any app many time a box open and say your current connection is slow and many time it say time out and after this it
-
Hi there So I just changed from an iphone4S to an iphone 5 because my screen didn't work any longer on the 4s but the phone itself still works so I managed to get all my contacts etc BUT for some reason I can't transfer all my music across to itunes
-
Is there a way to increase volume output on headset? The current settings are way too low.
-
Datagrid styling. All even rows blue - odd rows white
Hi. I have seen a lot of tables where the second row is white and the first is blue. This makes it easier to read the data for a particular students results. How could that be done - would you have to code it in ie: colour the even rows by targeting
-
How do i restore my ipod?!? PLZ HELP
what do i need to do??? and how do i back up my music???