Windows 8.1 Error (Blue Screen) DRIVER IRQL NOT LESS THAN OR EQUA

i need help with this its been very annoying every time i try to play a game after few minutes win 8 show and error and blue screeen apprear's
sorry we have encountered a problem DRIVER IRQL
NOT LESS THAN OR EQUAL please help  me fix this
my laptop
HP Pavilion 15-n216se Notebook

 We do need the actual log files (called a DMP files) as they contain the only record of the sequence of events leading up to the crash, what drivers
were loaded, and what was responsible.  
Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
If you have any questions about the procedure please ask
Wanikiya and Dyami--Team Zigzag

Similar Messages

  • Windows 7 installation error (Blue Screen)

    I recently installed Boot Camp on my Mac Pro so that I could install Windows 7 Ultimate. I followed all the instructions. Once I get to the part where Windows is installed my Mac Pro restarts and I get a blue screen with a bunch of errors. Then my Mac Pro restarts again and I am giving the "Windows was not shut down properly message" and asks me to choose a start up option. No matter what option I choose the same thing happens over and over. Can anyone help?

    Apple doesn't support Windows 7 on our MacPro1,1. There is a llst of supported Mac of all things.
    To use more than 1.9GB RAM you need 64-bit which won't boot from Windows 7 DVD.,
    Okay, you want to put both on one hard drive; I don't. So you need BCA which is also semi crippled.
    Lion: too early except to test drive.

  • When tryed to run diagnostic test  windows blacked out then blue screen ipad will not turn on now

    when I ran a diaganostic test windows blacked out and then the "blue screen of death"........and now my ipad will not turn on ......has anyone had this problem ?...if so...what now

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • IRQL Not Less Than Or Equal To [ B.S.O.D. ]

    Okay, I really hope this is the right place for help, because I'm growing increasingly frustrated. Where to begin?...
    Ah, alright. So, I just recently bought this computer in Janurary, and it was working fine until a few weeks ago.I shut the laptop and when I turned it on, it gave me the Blue Screen of Death. I started it up in Safe Mode, and found that this was the problem.
    " Files that help describe the problem:
      C:\Windows\Minidump\032812-54335-01.dmp
      C:\Users\name\AppData\Local\Temp\WER-92992-0.sysdata.xml
    I cleaned my temp files, but had to allow administrative permission to delete the latter. I'm not sure if I took care of the first one, but I went in and deleted stuff in the Disk Cleanup, and 'minidump' was in there...So maybe?
    And I was hoping it would be okay. WELL, it was for an hour, but then I shut the laptop again and it brought the B.S.O.D  up yet again, only with the IRQL etc thing.
    I...don't have any idea about how any of that coding information, whatever it is, so...I ...Just have no idea.
    Help. ;

    1. Which computer? There is a label on the bottom.
    2. Please attach the 032812-54335-01.dmp file from the C:\Windows\Minidump folder to your reply.
       Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL
    -Jerry

  • Driver IRQL not less or equal (igdkmd64.sys)

    I am receiving the error "DRIVER_IRQL_NOT_LESS_OR_EQUAL (igdkmd64.sys)" periodically whenever I try to start up graphics-heavy programs.  I had thought it might be related to the intel graphics driver (though the graphics-heavy games should be using the NVIDIA GeForce GTX 770M graphics card on my Qosmio X75-A7170), but have tried reinstalling it and still received this error.  The Intel website lists an updated intel graphics driver, but when I tried to install it, it said that it wasn't able to install on this system and that I needed to get it through the manufacturer (i.e., Toshiba).  From what I can find via Toshiba, my computer is running the most updated graphics driver for the intel 4600 integrated chip that backs up the Nvidia card.  I am still receiving the error whenever I try to play a game.  At this point I am just confused.  Is there something else I should be doing?  I have only had this computer since mid-April, so I am surprised to be having problems with it already.

    These are the latest display drivers for your model for Windows 8.1:
    nVidia Display Driver Version: 9.18.13.2765 Posted Date: 2014-03-03 Release Date: 2014-03-03
    Intel Display Driver File: TC00576000C.exe Version: 9.17.10.3223 and 10.18.10.3308 Posted Date: 2013...
    Do you still get the error with those installed?
    - Peter

  • Driver irql not less or equal btfilter.s​ys

    Computer keeps crashing every time it starts up, what should I do
    Mwiza

    Which computer? There is a label on the bottom.
    If you can start Windows, please attach corresponding *.dmp files from the C:\Windows\Minidump folder.
    -Jerry

  • Windows XP Pro Sp3 Blue Screen of Death (Attn: The Hatter please?)

    I have installed windows on my macbook pro several times and everytime i let windows update i get the driver irql not less or equal error. i do have the nvidia gpu and i know there are some driver issues with this on the new windows updates. i attn this to you The Hatter cause i remember seein some of your post that had possible solutions to this, i just cant remember the threads....
    if you or anyone could help me out that would be greatly appreciated, i have already disabled the driver so it is stable, and have yet to update xp, but diableing the driver is annoying with the windows lagging and the lagging in the scrolling.
    Thanks You

    Does anybody have any ideas? Please, this problem is getting a bit irritating and I know there has to be a solution to it.

  • Unmountable boot volume error blue screen

    I have a toshibia laptop that has crashed, I am eventually getting the unmountable_boot_volume error blue screen, the recovery disks that i ordered will not work, just disk 1 loads windows file then goes to a black screen with the cursor pointer, computer repair does the same thing, os is windows 7 satellite c655d-s5120 64 bit the bios does show the hard drive name and the boot log is showing the last driver loaded is windows/system 32/drivers/atipcie.sys, can I order a recovery for the windows 7 or is there any other ideas to fix this?not sure why this is happening

    If you've already ordered a set of recovery discs, you probably don't need to order another one. While it's possible that the discs are bad (and maybe you should call customer support just to see what they say), it's also possible that you have a hardware failure of some sort.
    - Peter

  • Portege R100 - Random Blue Screen of Death (IRQL not less or equal)

    Hi,
    I've been getting random "Blue Screen of Death" screens in the last few weeks. The error is "IRQL not less or equal" and it's performing a memory dump every time. If I get the error and try restarting the laptop after, I usually get the same "Blue Screen of Death" screen when booting.
    I didn't install any new hardware lately. Last upgrade was about a year ago; upgraded the memory. I've tried replacing the RAM with a spare one I had and I was still getting the same error.
    I didn't install any new software in the last weeks that would coincide with this error.
    I'm monitoring the CPU temperature and I doesn't go higher than 48 deg Celcius.
    I'm not an expert but I would assume this is purely an hardware problem ? Since I rarely hear the CPU fan, I thought it could be the CPU overheating.
    But even after making the CPU fan run at 100% using a freeware called "Speed Fan" I was still getting the same random "Blue Screen of Death" screen.
    I would really appreciate any feedback and help. I really like my R100 and would like to fix it.
    Mark.

    Hello, I have a Portege R500 and I am also too having this error message. I was getting a blue screen when loading the pc advising of a memory dump issues.I ahve replaced the ram inside the laptop and this has failed to resolve the issue. I am now having the error, IRQL not less or Equal everytime. I have run a memtest86 scan and this did show up possible memory issues. SO I have replaced the memory chip again. Still showing up as memory issues.
    You have mentioned this could be a cpu or memory controller. If this is the memory controller can this be replaced? or would a motherboard replacement be the best option?
    I have not tried a re install of windows 7 32 bit as yet, As the memtest86 program has identified possible memory issues. Please can some one advise if replacing the cpu and possible memory controller would resolve this. Memtest log available if wanted.
    Regards
    John Powell

  • Blue Screens, Vista 32-Bit. IRQL Not Less or Equ

    Hi, before I begin, I'd like to thank anyone who can help for any assistance provided. This is my first system build and I've been running Vista for less than an hour (And it took about 0 installation attempts to do this), so forgive me for my lack of knowledge in this category. Basically whenever I try to install the drivers, I get a blue screen error that says IRQL Not Less or Equal. My system is as follows:
    Creative X-Fi Fatalty Sound Card (The one with the front bezel and remote)
    ASUS P5N-E SLI nForce 650i Chipset Motherboard
    Intel Core 2 Duo E6600 2.4GHz, Overclocked to 3.0GHz with Zalman CNPS9700 LED.
    2GB Corsair XMS2 DDR2-800 RAM, Overclocked to 870MHz.
    eVGA 8800GTS 320MB Graphics Card, Overclocked to 65 Core, 900 Memory
    Seagate Barracuda 7200.0 320GB 7200 RPM SATA Hard Dri've
    Samsung Write Master 8X DVD-RAM Lightscribe SATA Dri've
    Basically, as I glimpsed through the posts I saw someone saying their 8800GTS conflicted with the X-Fi in Vista, so that's likely my problem.
    Any time I installed the drivers, the blue screen happened before setup appeared to finish. Vista wouldn't boot after that and I had to use system restore from my Install DVD. I've tried undoing my overclocks but it does nothing... I doubted it would make any difference anyway though. I have no clue what to do to fix this, but if there is a possible way, it would help if it was a step-by-step thing because I'm unfamiliar with Vista, driver modification, or whatever else this will require.
    Thanks again in advance for any assistance you can provide. I do appreciate it very much and am excited to get the card working again so I can resume gaming.
    - Beau

    Ok, by disabling my sound on my motherboard, I successfully got past this error. But now I noticed that it's interfering with my Logitech keyboard and mouse set. Basically what happened is that they stopped working and the driver install never finished (It appeared as if that program froze in action), while my mouse and keyboard were rendered useless. I restarted and did a system restore and installed the drivers for my logitech set, but now it's saying that I have not restarted since installing drivers when I attempt to install the creative drivers, despite restarting several times. Any ideas anyone?
    Thanks again.
    - Beau
    Edit: After reading some of the other posts in this board, I would like to add that I understand that asking for X-Fi help on Vista is like asking for help in New Orleans after being in Hurricane Katrina, but I really would appreciate assistance to help getting things working.Message Edited by Supercoolyo on 07--200706:49 PM

  • Error blue screen with KM2M Combo Board

    The setup of my PC is:
    KM2M Combo L
    Athlon 2200+
    1x128 Mb DDR PC 2100
    S3 graphics pro savage DDR (on board, currently 16M)
    AC97 audio controller (on board)
    HDD Samsung 6 G
    CD 52x
    Floppy drive
    Mouse, keyboard PS/2
    Windows XP Home version 2002
    The problem is this:
    Once the operative system is installed, the pc works correctly. When the drivers on the board drivers cd are installed, the system crash often, especially playing a movie or running a game, and a error blue screen are shown.
    Please somebody tell me how can I solve this fastidious problem, or at less, what the failure could be.
    Thanks a lot!

    What brand of memory ? Perhaps 128 Mb. of memory is too poor, since your problems happens when playing videos or games. Borrow a 256 Mb. module and see wha happens.-  8)

  • Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    In the article Resolve iOS update and restore errors this is what it says about error 14:
    Check your USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
    If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
    To narrow down the issue, you can also change up your hardware:
    Use the USB cable that came with your device, or a different Apple USB cable.
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    If necessary, resolve any further issues with the USB connection, then with your security software.
    If you're still seeing the error message, check for hardware issues by following the next section.

  • STOP ERROR - Blue Screen - on Lap Top - Fixed, tear1, support rocks!!!!!!

    New Iphone, and new laptop, installed itunes Noprob,
    Hooked Iphone to usb laptop found Iphone and installed and activated Noprob,All systems go, I am loving it.
    I then ejected my Iphone and hooked up my Ipod to transfer purchesed music and shows transfered Noprob, so I eject my Ipod to hook up my Iphone to put my purchesed music on it.
    THATS when it happened.
    STOP ERROR- Blue screen,cpu restarted on its own.
    I deleted itunes and I deleted camradrives, printer drivers.
    I tried allmost everything and still got the same blue screen.
    To make a long story shorter I called apple talked to the (now this is important) Iphone/Itunes department they are seperate but have a div. that works as one but you have to ask for the department that takes care of both or you will talk to both or 3 or 4 other dept.
    Tear 1 Support had me do a soft reset on my phone it did not work so I backed up my phone # and they showed me how to do a compleate reset and it worked.
    I have been Error and blue screen free for 2 days and I feel very posative about the future with my relationship between my cpu and my phone
    Thank you for your time.
    I hope I help some one I found no relief here with my problem but its a great resource for information
    GOD BLESS TEAR 1 SUPPORT YOUR TEAM ROCK'S
    Pro-Iceman
    Anacotes,Wa

    You don't need to upgrade your software.  But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
    If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3.  It's easy to use in DW CS4, 5, 6 or CC.  More importantly, it's bullet proof and works in all devices. 
    Pop-Menu  Magic3 by PVII (commercial DW extension)
    http://www.projectseven.com/products/menusystems/pmm3/index.htm
    If you don't have a budget to work with, you can roll your own menus with jQuery plugins.  A bit more effort on your part, but they perform better than Spry.
    jQuery Superfish
    http://users.tpg.com.au/j_birch/plugins/superfish/
    jQuery MegaMenu2
    DEMO:
    http://www.geektantra.com/projects/jquery-megamenu-2/
    DOWNLOAD:
    http://code.google.com/p/jquery-megamenu/
    Nancy O.

  • Intel processor bug causes Windows 2008r2 guest to blue screen

    We recently purchased several B200-M3 blades with E5-2680v2 processors.  Our UCS infrastructure and blade firmware is at 2.2(1d).  ESXi hosts are at 5.5u1.
    From my reading of the Release Notes, this makes the new blades vulnerable to Caveat CSCuo30572 which is a bug in the v2 processors that can cause Windows 2008R2 guests to blue screen.
    VMware KB2073791 also deals with this bug
    The Intel Erratum is C135
    Updating the firmware (2.2(1d) probably to fixed version 2.2(3d)) is a relatively long process in our environment.
    Has anyone experienced this bug?  Do the guests blue screen at any particular time; e.g. when booting?  Are Windows 2012 guests impacted?  One of our new v2 blades was running Windows 2008R2 guests for about a week without any known problem.  It has since been taken out of production.
    The Release Notes (2.2) description for CSCuo30572 is:  "Intel v2 processors no longer cause PSOD with Microsoft Windows 2008 R2 VM guests."  Should the PSOD (ESXi crash) actually be BSOD (Microsoft crash)?  Or can ESXi purple screens be caused also, crashing the entire host?
    The Release Notes also indicate that the Caveat is resolved in release 2.2(2c)A.  Does the A indicate that an Infrastructure update is all that is needed?  That does not seem like it would supply the fixed microcode to the processors via BIOS.
    I'm basically looking for some insight before proceeding with another FW update.  Thank you.

    Yes, it refers to Infrastructure (UCS Manager, FI and IOM). You could just upgrade the infrastructure to 2.2.3d and leave your Servers at 2.2.1d 
    Table 2 Mixed Cisco UCS Releases Supported
    of the release notes.
    CSCuo30572
    Intel v2 processors no longer cause PSOD with Microsoft Windows 2008 R2 VM guests.
    2.1(3a)A
    2.2(2c)A

  • Thinkpad X300 with windows xp sp2 gets blue screen after standby.

    We have a Thinkpad X300 (with windows xp sp2) gets blue screen after standby. I mean after you close the lid then open it. Anyone has see this kind of behave before?
    Thanks,

    I have found the solution to this problem - hope you are still watching the thread.
    Express install in parallels seems to be the culprit. Do a custom install instead and set your own virtual hard disk size. I set mine to 12 Gb (12000 Mb)and made it a fixed size instead of "growing" or whatever the heck parallels calls it. I also chose shared network instead of "bridged" (I read that someone else had identified this as part of the problem).
    After making those changes it worked like a charm.

Maybe you are looking for

  • What's wrong with the if-statement

    the last else-branch is  not executed... why?                 if wa_not_existing_values-node_value(4) = co_area and wa_not_existing_values-node_value(5) <> str_cctr_chr.                   str_cctr = wa_not_existing_values-node_value+4.               

  • How do I open a PDF on iCloud from my iPhone?

    This is my primary use case: viewing PDFs that I've saved on iCloud.

  • Exchange Rate is stored in field..... ?  (PO Document)

    Hi guys, Im using SRM 4.0sp8 with ECS. THE PROBLEM: I have a PO document that was created in MXN (locally), then the purchaser guy changed to USD and SRM  converted the amount of money succesfuly.     However, the PO document was replicated to R3 wit

  • Regular expression again

    Hi there i'm using this regular expression: String regexp = "(\\s+)\\di(\\s+)"; Pattern p = Pattern.compile(regexp,CASE_INSENSITIVE); Matcher m = p.matcher(inputString); clean = m.replaceAll(" "); by which i'd like, given the following inputString: "

  • TS1424 can't download ny post after just paying for it on additional ipad

    I can't download ny post after just paying for it on additional ipad. Any idea how to fix?